PBSAsbestosBulkRpt 25004964 P0001 S0001-0024~1.pdf
PDF 782 KB Posted
- Solicitation number
- S-10700-00013306
- Issued by
- Marion County, Oregon
About this file
The document is an Asbestos Bulk Sample Inventory report prepared by Eurofins LabCor PDX for PBS Engineering and Environmental LLC, documenting asbestos testing results for 24 material samples collected from various locations within a parking structure. The samples were collected from different areas including north and south garages, with sampling locations spanning southwest, northwest, north, northeast, east, and south tunnels. Each sample was systematically coded (25004964-0001 through 25004964-0024) and analyzed using Polarized Light Microscopy (PLM) with dispersion staining, with a 72-hour turnaround time requested. The testing was conducted on March 13, 2025, with samples received on March 10, 2025, and involved examining various materials including insulation, sealants, caulk, CMU (Concrete Masonry Unit), and gaskets.
The comprehensive testing revealed that none of the 24 samples contained asbestos, with all samples receiving a "No Asbestos Detected" (ND) result. The samples consisted of diverse materials with varying compositions, including off-white fibrous materials with silver foil, yellow and gray insulation, semi-fibrous materials, cementitious materials, and debris. Non-asbestos content varied, with some samples containing 60% glass fibers, others 20-30% cellulose, and one sample with 95% glass fibers. The sample composite homogeneity was consistently rated as "Moderate" across all tested materials. The report was prepared under the supervision of Technical Manager Ryan Talaski-Brown and analyzed by Tim Cammann, following EPA methodology and maintained by a NVLAP accredited laboratory (Lab Code 200741-0).
View the file
Other files
Show all 16
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CMPS
DAS
Bulk Sample Inventory
Code Material Location Lab Results
North garage; southwest tunnel; yellow fiberglass insulation
Eurofins LabCor
PDX
25004964-0001 Insulation
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material with silver foil
Layer 2 No Asbestos DetectedYellow Insulation
North garage; southwest tunnel; yellow fiberglass insulation
Eurofins LabCor
PDX
25004964-0002 Insulation
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material with silver foil
Layer 2 No Asbestos DetectedYellow Insulation
North garage; southwest tunnel; yellow fiberglass insulation
Eurofins LabCor
PDX
25004964-0003 Insulation
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material with silver foil
Layer 2 No Asbestos DetectedYellow Insulation
North garage; west tunnel; white sealant on fiberglass Eurofins LabCor
PDX
25004964-0004 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedGray/White Semi-Fibrous
Material
Layer 2 No Asbestos DetectedBlack Insulation Material
North garage; west tunnel; gray door caulk Eurofins LabCor
PDX
25004964-0005 Caulk
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Caulk with gray coating
North garage; west tunnel; gray grout, gray CMU block Eurofins LabCor
PDX
25004964-0006 CMU
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedGray Cementitious Material
2. 1
March 2025
Project No.: 25004964 Phase No.: 0001// An Apex Company
Bulk Sample Inventory
Code Material Location Lab Results
North garage; northwest tunnel; yellow fiberglass insulation
Eurofins LabCor
PDX
25004964-0007 Insulation
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material with silver foil
Layer 2 No Asbestos DetectedYellow Insulation
North garage; northwest tunnel; white sealant on fiberglass
Eurofins LabCor
PDX
25004964-0008 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Semi-Fibrous
Material
Layer 2 No Asbestos DetectedYellow Insulation
North garage; northwest tunnel; white sealant on fiberglass
Eurofins LabCor
PDX
25004964-0009 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material with silver foil
Layer 2 No Asbestos DetectedYellow Insulation
North garage; north tunnel; white sealant on fiberglass Eurofins LabCor
PDX
25004964-0010 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material with silver foil
Layer 2 No Asbestos DetectedYellow Insulation
North garage; northeast tunnel; white sealant on fiberglass Eurofins LabCor
PDX
25004964-0011 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Semi-Fibrous
Material
Layer 2 No Asbestos DetectedYellow Insulation
North garage; northeast tunnel; brown pipe gasket Eurofins LabCor
PDX
25004964-0012 Gasket
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedBrown Debris
North garage; east tunnel; gray grout, gray CMU block Eurofins LabCor
PDX
25004964-0013 CMU
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedGray Cementitious Material
2. 2
Bulk Sample Inventory
Code Material Location Lab Results
North garage; east tunnel; gray door caulk Eurofins LabCor
PDX
25004964-0014 Caulk
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedTan Sealant Material
North garage; southeast tunnel; red pipe penetration sealant
Eurofins LabCor
PDX
25004964-0015 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedWhite Semi-Fibrous Material with foil
Layer 2 No Asbestos DetectedYellow Foam
Layer 3 No Asbestos DetectedRed Sealant Material
South garage; northeast tunnel; red pipe penetration sealant
Eurofins LabCor
PDX
25004964-0016 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedWhite Semi-Fibrous Material with foil
Layer 2 No Asbestos DetectedYellow Foam
Layer 3 No Asbestos DetectedRed Sealant Material
South garage; northeast tunnel; white sealant on fiberglass Eurofins LabCor
PDX
25004964-0017 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedGray/White Semi-Fibrous
Material
Layer 2 No Asbestos DetectedBlack Insulation Material
South garage; east tunnel; green exposed pipe gasket Eurofins LabCor
PDX
25004964-0018 Gasket
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedGreen Fibrous Material
South garage; southeast tunnel; yellow fiberglass insulation
Eurofins LabCor
PDX
25004964-0019 Insulation
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedGray Insulation
South garage; southeast tunnel; white sealant on fiberglass Eurofins LabCor
PDX
25004964-0020 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material with silver foil
Layer 2 No Asbestos DetectedYellow Insulation
2. 3
Bulk Sample Inventory
Code Material Location Lab Results
South garage; south tunnel; white sealant on fiberglass Eurofins LabCor
PDX
25004964-0021 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material with silver foil
South garage; south tunnel; white sealant on fiberglass Eurofins LabCor
PDX
25004964-0022 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material with silver foil
Layer 2 No Asbestos DetectedOrange Insulation
South garage; southwest tunnel; white sealant on fiberglass
Eurofins LabCor
PDX
25004964-0023 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material with silver foil
Layer 2 No Asbestos DetectedGray Insulation
South garage; west tunnel; white sealant on fiberglass Eurofins LabCor
PDX
25004964-0024 Sealant
Analysis:Description:Layer:
Layer 1 No Asbestos DetectedOff-White Fibrous Material on silver foil
2. 4
Approved by:
Technical Manager Ryan Talaski-Brown
Report for:
John Yuly PBS Engineering and Environmental: Portland 4412 S Corbett Ave.
Portland, OR 97239
Regarding:
Eurofins Built Environment Testing West, LLC Project: 25004964 Phase 0001
EML ID: 3979381
All samples were received in acceptable condition unless noted in the Report Comments portion in the body of the report. The results relate only to the samples as received and tested. The results include an inherent uncertainty of measurement associated with estimating percentages by polarized light microscopy. Measurement uncertainty data for sample results with >1% asbestos concentration can be provided when requested.
Eurofins Built Environment Testing West, LLC ("the Company"), a member of the Eurofins Built Environment Testing group of companies, shall have no liability to the client or the client's customer with respect to decisions or recommendations made, actions taken or courses of conduct implemented by either the client or the client's customer as a result of or based upon the Test Results. In no event shall the Company be liable to the client with respect to the Test Results except for the Company's own willful misconduct or gross negligence nor shall the Company be liable for incidental or consequential damages or lost profits or revenues to the fullest extent such liability may be disclaimed by law, even if the Company has been advised of the possibility of such damages, lost profits or lost revenues. In no event shall the Company's liability with respect to the Test Results exceed the amount paid to the Company by the client therefor.
Dates of Analysis:
Asbestos PLM: 03-13-2025
Service SOPs: Asbestos PLM (EPA 40CFR App E to Sub E of Part 763 & EPA METHOD 600/R-93-116, SOP EM-AS-S-1267) NVLAP Lab Code 200741-0
EMLab ID: 3979381, Page 1 of 8Eurofins Built Environment Testing West, LLC
Eurofins Built Environment Testing West, LLC 4321 S. Corbett Ave. Suite A, Portland, OR 97239
(833) 465-5857 www.eurofinsus.com/Built Client: PBS Engineering and Environmental: Portland C/O: John Yuly Re: 25004964 Phase 0001
Date of Receipt: 03-10-2025 Date of Report: 03-13-2025
ASBESTOS PLM REPORT
Total Samples Submitted: 24 Total Samples Analyzed: 24
Total Samples with Layer Asbestos Content > 1%: 0
Location: 25004964-0001 Lab ID-Version‡: 19779007-1
Sample Layers Asbestos Content Off-White Fibrous Material with silver foil ND
Yellow Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0002 Lab ID-Version‡: 19779008-1
Sample Layers Asbestos Content Off-White Fibrous Material with silver foil ND
Yellow Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0003 Lab ID-Version‡: 19779009-1
Sample Layers Asbestos Content Off-White Fibrous Material with silver foil ND
Yellow Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0004 Lab ID-Version‡: 19779010-1
Sample Layers Asbestos Content Gray/White Semi-Fibrous Material ND
Black Insulation Material ND Composite Non-Asbestos Content: 20% Cellulose
20% Glass Fibers Sample Composite Homogeneity: Moderate
EMLab ID: 3979381, Page 2 of 8Eurofins Built Environment Testing West, LLC
The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. The Company reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.
All components not quantified as asbestos content and non-asbestos content are considered to be non-fibrous matrix components. Matrix components may include, but are not limited to, gypsum, paint, silicate minerals, vinyl, binder, calcium carbonate, tar, and foam.
Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.
‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is reflected by the value of "x".
(833) 465-5857 www.eurofinsus.com/Built Client: PBS Engineering and Environmental: Portland C/O: John Yuly Re: 25004964 Phase 0001
Date of Receipt: 03-10-2025 Date of Report: 03-13-2025
ASBESTOS PLM REPORT
Location: 25004964-0005 Lab ID-Version‡: 19779011-1
Sample Layers Asbestos Content Off-White Caulk with gray coating ND
Sample Composite Homogeneity: Moderate
Location: 25004964-0006 Lab ID-Version‡: 19779012-1
Sample Layers Asbestos Content Gray Cementitious Material ND
Sample Composite Homogeneity: Moderate
Location: 25004964-0007 Lab ID-Version‡: 19779013-1
Sample Layers Asbestos Content Off-White Fibrous Material with silver foil ND
Yellow Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0008 Lab ID-Version‡: 19779014-1
Sample Layers Asbestos Content Off-White Semi-Fibrous Material ND
Yellow Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
EMLab ID: 3979381, Page 3 of 8Eurofins Built Environment Testing West, LLC
The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. The Company reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.
All components not quantified as asbestos content and non-asbestos content are considered to be non-fibrous matrix components. Matrix components may include, but are not limited to, gypsum, paint, silicate minerals, vinyl, binder, calcium carbonate, tar, and foam.
Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.
‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is
(833) 465-5857 www.eurofinsus.com/Built Client: PBS Engineering and Environmental: Portland C/O: John Yuly Re: 25004964 Phase 0001
Date of Receipt: 03-10-2025 Date of Report: 03-13-2025
ASBESTOS PLM REPORT
Location: 25004964-0009 Lab ID-Version‡: 19779015-1
Sample Layers Asbestos Content Off-White Fibrous Material with silver foil ND
Yellow Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0010 Lab ID-Version‡: 19779016-1
Sample Layers Asbestos Content Off-White Fibrous Material with silver foil ND
Yellow Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0011 Lab ID-Version‡: 19779017-1
Sample Layers Asbestos Content Off-White Semi-Fibrous Material ND
Yellow Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0012 Lab ID-Version‡: 19779018-1
Sample Layers Asbestos Content Brown Debris ND
Composite Non-Asbestos Content: 30% Cellulose Sample Composite Homogeneity: Moderate
EMLab ID: 3979381, Page 4 of 8Eurofins Built Environment Testing West, LLC
The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. The Company reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.
All components not quantified as asbestos content and non-asbestos content are considered to be non-fibrous matrix components. Matrix components may include, but are not limited to, gypsum, paint, silicate minerals, vinyl, binder, calcium carbonate, tar, and foam.
Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.
‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is
(833) 465-5857 www.eurofinsus.com/Built Client: PBS Engineering and Environmental: Portland C/O: John Yuly Re: 25004964 Phase 0001
Date of Receipt: 03-10-2025 Date of Report: 03-13-2025
ASBESTOS PLM REPORT
Location: 25004964-0013 Lab ID-Version‡: 19779019-1
Sample Layers Asbestos Content Gray Cementitious Material ND
Sample Composite Homogeneity: Moderate
Location: 25004964-0014 Lab ID-Version‡: 19779020-1
Sample Layers Asbestos Content Tan Sealant Material ND
Sample Composite Homogeneity: Moderate
Location: 25004964-0015 Lab ID-Version‡: 19779021-1
Sample Layers Asbestos Content White Semi-Fibrous Material with foil ND
Yellow Foam ND Red Sealant Material ND
Composite Non-Asbestos Content: 10% Cellulose Sample Composite Homogeneity: Moderate
Location: 25004964-0016 Lab ID-Version‡: 19779022-1
Sample Layers Asbestos Content White Semi-Fibrous Material with foil ND
Yellow Foam ND Red Sealant Material ND
Composite Non-Asbestos Content: 10% Cellulose Sample Composite Homogeneity: Moderate
EMLab ID: 3979381, Page 5 of 8Eurofins Built Environment Testing West, LLC
The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. The Company reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.
All components not quantified as asbestos content and non-asbestos content are considered to be non-fibrous matrix components. Matrix components may include, but are not limited to, gypsum, paint, silicate minerals, vinyl, binder, calcium carbonate, tar, and foam.
Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.
‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is
(833) 465-5857 www.eurofinsus.com/Built Client: PBS Engineering and Environmental: Portland C/O: John Yuly Re: 25004964 Phase 0001
Date of Receipt: 03-10-2025 Date of Report: 03-13-2025
ASBESTOS PLM REPORT
Location: 25004964-0017 Lab ID-Version‡: 19779023-1
Sample Layers Asbestos Content Gray/White Semi-Fibrous Material ND
Black Insulation Material ND Composite Non-Asbestos Content: 20% Cellulose
20% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0018 Lab ID-Version‡: 19779024-1
Sample Layers Asbestos Content Green Fibrous Material ND
Composite Non-Asbestos Content: 30% Cellulose Sample Composite Homogeneity: Moderate
Location: 25004964-0019 Lab ID-Version‡: 19779025-1
Sample Layers Asbestos Content Gray Insulation ND
Composite Non-Asbestos Content: 95% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0020 Lab ID-Version‡: 19779026-1
Sample Layers Asbestos Content Off-White Fibrous Material with silver foil ND
Yellow Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
EMLab ID: 3979381, Page 6 of 8Eurofins Built Environment Testing West, LLC
The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. The Company reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.
All components not quantified as asbestos content and non-asbestos content are considered to be non-fibrous matrix components. Matrix components may include, but are not limited to, gypsum, paint, silicate minerals, vinyl, binder, calcium carbonate, tar, and foam.
Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.
‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is
(833) 465-5857 www.eurofinsus.com/Built Client: PBS Engineering and Environmental: Portland C/O: John Yuly Re: 25004964 Phase 0001
Date of Receipt: 03-10-2025 Date of Report: 03-13-2025
ASBESTOS PLM REPORT
Location: 25004964-0021 Lab ID-Version‡: 19779027-1
Sample Layers Asbestos Content Off-White Fibrous Material with silver foil ND
Composite Non-Asbestos Content: 20% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0022 Lab ID-Version‡: 19779028-1
Sample Layers Asbestos Content Off-White Fibrous Material with silver foil ND
Orange Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0023 Lab ID-Version‡: 19779029-1
Sample Layers Asbestos Content Off-White Fibrous Material with silver foil ND
Gray Insulation ND Composite Non-Asbestos Content: 60% Glass Fibers Sample Composite Homogeneity: Moderate
Location: 25004964-0024 Lab ID-Version‡: 19779030-1
Sample Layers Asbestos Content Off-White Fibrous Material on silver foil ND
Composite Non-Asbestos Content: 15% Cellulose Sample Composite Homogeneity: Moderate
EMLab ID: 3979381, Page 7 of 8Eurofins Built Environment Testing West, LLC
The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. The Company reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.
All components not quantified as asbestos content and non-asbestos content are considered to be non-fibrous matrix components. Matrix components may include, but are not limited to, gypsum, paint, silicate minerals, vinyl, binder, calcium carbonate, tar, and foam.
Inhomogeneous samples are separated into homogeneous subsamples and analyzed individually. ND means no fibers were detected. When detected, the minimum detection and reporting limit is less than 1% unless point counting is performed. Floor tile samples may contain large amounts of interference material and it is recommended that the sample be analyzed by gravimetric point count analysis to lower the detection limit and to aid in asbestos identification.
‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is
(833) 465-5857 www.eurofinsus.com/Built Client: PBS Engineering and Environmental: Portland C/O: John Yuly Re: 25004964 Phase 0001
Date of Receipt: 03-10-2025 Date of Report: 03-13-2025
ASBESTOS PLM REPORT
PROJECT ANALYST AND SIGNATORY REPORT
Project Analyst
The test report shall not be reproduced except in full, without written approval of the laboratory. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. The Company reserves the right to dispose of all samples after a period of thirty (30) days, according to all state and federal guidelines, unless otherwise specified.
‡ A "Version" indicated by -"x" after the Lab ID# with a value greater than 1 indicates a sample with amended data. The revision number is reflected by the value of "x".
Analyst: Tim Cammann
EMLab ID: 3979381, Page 8 of 8Eurofins Built Environment Testing West, LLC
File details come from the government source that posted it. Updated .