PALLET SPEC SHEET NIIN LLS054682 DOC 61817903.pdf

This document is a Material Specifications section from a solicitation detailing requirements for processing sheet metal materials. The contractor must be capable of processing mild steel, galvanized steel, stainless steel, and aluminum (both ferrous and non-ferrous) with material thicknesses ranging from 0.024" to 0.250". The system must accommodate blank sizes with a minimum of 8 inches in the Y-axis and 20 inches in the X-axis, and a maximum of 60 inches in the Y-axis and 120 inches in the X-axis.

Material quality standards require strict control of warpage and straightness. The upward bow of material thickness between 0.030" and 0.134" shall not exceed 0.216" (including the material thickness itself), with no allowable downward bow for automated operation. Material straightness is specified at a tolerance of ±1.3 mm (±0.051") across a 3048 mm (120") length. The document also includes technical illustrations depicting sheet metal pallet wood construction with specific dimensions for hopper design and mounting accommodations, indicating this is equipment specification for an automated material handling or processing system capable of handling large-format metal sheets with precision tolerances.