ADDED DATA DOC 61817903.pdf
PDF 115 KB Posted
- Attached to
- SHEET, METAL AL
- Solicitation number
- SPMYM226Q7698
About this file
This document is a federal contract ordering specification for aluminum sheet material. The specification requires National Stock Number (NSN) LLS054682 aluminum and aluminum-alloy sheet conforming to ASTM-B-209 standard dated August 1, 2007. The required material specifications include alloy number 5052 with H32 temper in mill finish, flat sheet configuration with dimensions of 0.190" thickness by 4" width by 96" length. Quantities are measured in pieces, and tensile property limits and dimensional tolerances must conform to ASTM-B-209 Table 2 and Table 3, and ANSI H35.2 standards.
Orders must include certification of compliance certifying that material is manufactured in accordance with ASTM-B-209, identification marking, and preservation, packaging, and packing per Practice B 660. Heat treatment per practice B918 is not required, and supply of temper pairs (H14 or H24) or (H34 or H24) is excluded. Deliverables must include an attached specification sheet and pallet drawing. Shipping pallets must fully support the material weight and length, accommodate forklift movement from both long and short sides, and comply exactly with the provided drawing specifications. Maximum shipment height including pallet is 9 inches. Paper dividers are prohibited.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PALLET SPEC SHEET NIIN LLS054682 DOC 61817903.pdf | ||
| Solicitation - SPMYM226Q7698.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NSN: LLS054682 DOC: 6181-7903
Paragraph 4 Ordering data
4.1.1 Standard Specification for Aluminum and Aluminum -Alloy Sheet and Plate, ASTM-B-209 , dated 1 August
4.1.2 Quantity is in pieces
4.1.3 Alloy number from Table 1: 5052
4.1.4 Temper number from Table 2 and Table 3 is: H32
4.1.5 Finish for sheet in nonheat-treatable alloys : mill finish
4.1.6 Sheet : flat
4.1.7 Dimensions (thickness, width, and length or coil size) 0.190" THK x 4" WIDTH X 96" LG
4.1.8 Tensile property limits and dimensional tolerances for sizes not covered in Table 2 or Table 3 of this specification and in ANSI H35.2, respectively
4.2 Orders for material meeting the requirements of this specification shall include the following information when required by the purchaser::
4.2.1 Supply of one of the pairs of tempers , (H14 or H24) or (H34 or H24), is excluded
4.2.2 Heat treatment in accordance with practice B918 is not required
Certification of Compliance that material is manufactured IAW ASTM-B-209 is required
4.2.7 Certification is required
4.2.8 Marking for identification is required
4.2.9 Practices B 660 applies yes; if yes levels of preservation, packaging, and packing required
NO PAPER DIVIDERS.
ATTACH A COPY OF SPEC SHEET.
*** ATTACH A COPY OF PALLET DRAWING***
Shipping pallet needs to fully support the entire weight/length of the sheet and be able to be moved with a forklift from the long side as well as the short side of the material. See provided drawing for specs. ***MAX SHIPMENT
HEIGHT 9" INCLUDING THE PALLET.*** Extremely important that pallet be made in accordance with provided drawing.
File details come from the government source that posted it. Updated .