P15PS00779_Amd_2.pdf

(x)

P15PS00779

x x copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT

THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

PY1

Sedro-Woolley WA 98284-1263 810 State Route 20

DOI, NPS, PWR - OLYM MABO - NOCA

PPY

Port Angeles WA 98362-6757 600 E. Park Avenue

NPS, PWR - OLYM MABO

04/10/2015000002

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

04/02/2015

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not, is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Amendment 2, issued on 4/10/15:

- Provides a revised product list and layout sketch.

- Incorporates additional provisions and clauses.

The due date and time are 4/17/15 at 1:00 Pacific Time.

Quoters must acknowledge receipt of this amendment in their quote - see Block 11, above.

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Sarah Welch

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

NSN 7540-01-152-8070

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

Cabinets and countertops, New Castle rehabilitation North Cascades NPS Complex

Page 2 Posted with Amendment 2, 4/10/15

CABINETS

Canyon Creek “Millennia” frameless prefabricated cabinets OR EQUIVALENT with:

• Exterior veneer - cherry wood.

• Stain color - cinnamon.

• Interior finish - grey melamine on particleboard.

• Door style - “Limoges”.

• Hinges – concealed, fully adjustable, opening to 110 degrees.

• Drawers – dovetail drawer boxes of ½” plywood construction with drawer guides mounted underneath.

• Panel ends to be installed to individual cabinets as noted below.

Equivalent product must be comparable in terms of construction, quality, and general appearance and exactly match the dimensions and finish requirements noted below. Refer to layout sketches.

Base Cabinets: Note: All base cabinets are “Mid Base Units”, with 31½ to 32” height

1 - B4D24 (4 drawer base, 24” wide, finished right side) 1 - B4D18 (4 drawer base, 18” wide) 1 - FBCC36SS (full base corner with super susan, 36” X 36”) 1 - BT12 (base tray, 12” wide) 1 - B2D24 (2 drawer base, 24” wide, finished left side) 1 - BESRL (to be mounted at left end of cabinet run) 1 - B3D18 (3 drawer base, 18” wide, finished right side)

1 - Finished Back Panel for island (72” wide X 34.5” high) Deleted: 1 - BRO36 (base roll-out, 36” wide)

1 - FBS36 (full sink base, 36” wide) Added: 1 - B4D12 (4 drawer base, 12” wide, finished both right and left sides) 1 - Filler Strip (3” X 42” wide) 1 - B3D30 (3 drawer base, 30” wide, finished left side)

Wall Cabinets: 2 - W2730 (wall – 2 shelves, 27” wide X 30” high, one unit with finished right side) 1 - W3018 (wall – no shelf, 30” wide X 18” high) 1 - MS2421 (microwave shelf, 24” wide X 21” high, finished right and left sides) 1 - W3336 (wall – 2 shelves, 33” wide X 36” high, finished right side) 1 - WD3336 (wall display, 33” wide X 36” high, finished left side)

Vanity Cabinets: All are deleted.

1 - VS27 (vanity sink, 27” wide) 1 - V3D12 (3 drawer vanity, 12” wide, finished right side) 1 - V3D12 (3 drawer vanity, 12” wide, finished left side)

Wardrobe Cabinets:

1 – WS3ON2121 (3 drawer lower, open mid & upper, 21” wide X 21” deep X 85“ high, finished left side) 1 – WSFHN3021 (door lower, mid & upper, 30” wide X 21” deep X 85” high, finished right side)

Moulding to match cabinets to be installed on the back wall of the toe kick. Dimensions: ~1/4" thick and the same height as the toe kick.

Cabinets and countertops, New Castle rehabilitation North Cascades NPS Complex

Page 3 Posted with Amendment 2, 4/10/15

1 ea of these lengths: 6', 8', 2’6” 2 ea of these lengths: 2' and 5'

COUNTERTOPS

Pre-formed laminate with bullnose rolled front edge and integral formed back splash. Formica, Travertine color (3526) OR EQUIVALENT. Equivalent product must be comparable in quality, durability, general care instructions, and appearance; exactly match sizes and shapes listed; and be compatible with cabinets.

To fit 24”-deep base cabinets listed above.

1 – 24” (square cut, finished both ends)

1 – 54” (45 degree cut left end, square cut right end, finished right end) 1 – 109” (45 degree cut right end, square cut left end, finished left end) 1 – 96” X 48“ (flat sheet stock laminate) Added: 1 – 54” (square cut, finished left end)

Deleted: To fit 21”-deep base cabinet: 1 – 52” (square cut, finished left end)

The following clauses and provisions are added in Amendment 2, and will be part of any resulting purchase order. The full text may be accessed electronically at www.acquisition.gov/far

Clauses

52.203-99 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements

(FEB 2015)

52.204-18 Commercial and Government Entity Code Maintenance (NOV 2014)

52.204-19 Incorporation by Reference of Representations and Certifications (DEC 2014)

52.232-39 Unenforceability of Unauthorized Obligations (JUN 2013)

52.232-40 Providing Accelerated Payments to Small Business Subcontractors (DEC 2013)

Provisions

52.204-16 Commercial and Government Entity Code Reporting (NOV 2014)

52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation and Certifications (DEC 2012)