MORU_Residence_45_ACM_Survey_11202014.PDF

Asbestos Bulk Analysis Report

Client:

Report Number:

Project/Test Address:

Client Number:

Reported Date:

Received Date:

Analyzed Date:

Anderson Environmental Services 11/18/2014

43-5649

11/20/2014

14-11-02003

7469 Whitepine Rd

Telephone: 800.347.4010

Richmond, VA 23237

Environmental Hazards Services, L.L.C.

Mt. Rushmore; Keystone, SD 57751

Laboratory Results Fax Number:

17B Statesboro Belle Fourche, SD 57717

11/19/2014

Layer Type AsbestosClient Sample Number

Other Materials

Lab Gross DescriptionLab Sample Number

White Chalky; White Paint-Like;

Inhomogeneous

14-11-02003-001 01 1% Fibrous Glass 99% Non-Fibrous

NAD

Black Adhesive;

Homogeneous

14-11-02003-002 02 97% Non-Fibrous3% Chrysotile

3%Total Asbestos:

White/Gray Granular;

Inhomogeneous

14-11-02003-003 03 100% Non-FibrousNAD

Brown Vinyl;

Homogeneous

14-11-02003-004A 04 100% Non-FibrousCove Base

NAD

White Adhesive; Brown Fibrous; Inhomogeneous

14-11-02003-004B 04 3% Cellulose 97% Non-Fibrous

Mastic NAD

1 of 2Page

Environmental Hazards Services, L.L.C

Project/Test Address:

Client Number: Report Number:43-5649 14-11-02003

Mt. Rushmore; Keystone, SD 57751

Other Materials

AsbestosLab Sample Number

Layer Type Lab Gross DescriptionClient Sample Number

Howard Varner

1% Asbestos

Analyst:

Reporting Limit:

Method:

QC Blank:

QC Sample:

Kathy Fletcher

EPA Method 600/R-93/116, EPA Method 600/M4-82-020

General Manager

Reviewed By Authorized Signatory:

78-M12012-1

SRM 1866 Fiberglass

NAD = no asbestos detectedLEGEND:

The condition of the samples analyzed was acceptable upon receipt per laboratory protocol unless otherwise noted on this report. Each distinct component in an inhomogeneous sample was analyzed separately and reported as a composite. Results represent the analysis of samples submitted by the client. Sample location, description, area, volume, etc., was provided by the client. This report cannot be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. This report shall not be reproduced except in full, without the written consent of the

Environmental Hazards Service, L.L.C. California Certification #2319 NY ELAP #11714 NVLAP #101882-0. All information concerning sampling location, date, and time can be found on Chain-of-Custody. Environmental Hazards Services, L.L.C. does not perform any sample collection.

Environmental Hazards Services, L.L.C. recommends reanalysis by point count (for more accurate quantification) or Transmission Electron Microscopy

(TEM), (for enhanced detection capabilities) for materials regulated by EPA NESHAP (National Emission Standards for Hazardous Air Pollutants) and found to contain less than ten percent (<10%) asbestos by polarized light microscopy (PLM). Both services are available for an additional fee.

400 Point Count Analysis, where noted, performed per EPA Method 600/R-93/116 with a Reporting Limit of 0.25%.

* All California samples analyzed by Polarized Light Microscopy, EPA Method 600/M4-82-020, Dec. 1982.

2 of 2Page

File1056166.pdf