Notice_of_Intent_to_Award.pdf

Superintendent of Schools Van Ayres

PROCUREMENT SERVICES DEPARTMENT

NOTICE OF INTENT TO AWARD

Invitation to Bid: ITB# 25237-ITB-DST Food Service Large Equipment

Date: June 26, 2025

As to the above-mentioned Request for Proposal pursuant to §§ 287.057(1)(a) and 120.57(3), Florida Statutes, Hillsborough County Public Schools (“HCPS”) posts its Notice of Intent to Award to the vendors identified in Attachment A. The awarded vendor(s) must meet all mutually agreed qualification requirements prior to the provision of the goods and services.

Failure to file a protest within the time prescribed in § 120.57(3), Florida Statutes, or failure to post the bond or other security required by law within the time allowed for filing a bond shall constitute a waiver of proceedings under Chapter 120, Florida Statutes. Any protest concerning HCPS’ decision must be timely received via courier, the General Manager of Procurement Services.

Protests may be filed by courier, hand delivery, or regular mail at: Hillsborough County Public Schools, Procurement Services Department, Office of the General Manager, 901 East Kennedy Boulevard, Tampa, Florida 33602. Protests may also be filed by email at corey.murphy@hcps.net. It is the filing party’s responsibility to meet all filing deadlines.

The Cone of Silence, HCPS policy 6320 – Procurement, prohibits any communication regarding an active competitive solicitation between any HCPS employee or School Board member and any third party, representative, or lobbyist of that party, in effect from the time of release of the competitive solicitation until awarded by The School Board of Hillsborough County, Florida.

Procurement Services appreciate all vendors’ interest in doing business with HCPS and encourage participation in future bidding opportunities. Any questions regarding the competitive solicitation process may be forwarded to the Procurement Services Department representative, below.

Sincerely, Christy Perales, Procurement Officer christy.perales@hcps.net Phone: (813) 272-4683

HILLSBOROUGH COUNTY PUBLIC SCHOOLS - PROCUREMENT DEPARTMENT

901 EAST KENNEDY BOULEVARD, TAMPA, FLORIDA 33602

OSD AWARDED CONTACT TELEPHONE EMAIL

REGISTERED VENDOR PERSON NUMBER ADDRESS

Allure Hospitality Supplier Inc 8351 Northwest 64th Street, Miami FL 33166 *Big Bend Restaurant Supply (850) 383-9100 400 Capital Circle Southeast Suite 15 Tallahassee, FL 32301 **Douglas Food Stores, Inc.

301 North Street, Bluefield, WV 24701 *Chef Depot 2 Melnick Drive Monsey, NY 10952 Innovative Foodservice Group Inc.

11101 North 46th Street, Tampa, FL 33617 Johnson-Lancaster and Associates Inc.

13031 US Highway 19 North Clearwater, FL 33764 Lebron 4118 Equipment & Supply Corp 4118 West Vine Street Kissimmee, FL 34741 *Russo's Restaurant Equipment & Supply 1537 Northgate Boulevard Sarasota, FL 34234 **Sam Tell and Son Inc 300 Smith Street Famingdale, NY 11735 **Stafford-Smith, Inc.

3414 South Burdick Street Kalamazoo, MI 49001 Strategic Equipment LLC 5843 Barry Road Tampa, FL 33634

Bid notifications were sent to 31 vendor planholders in the HCPS bid solicitation system.

Responses were received from 11 vendors. Their bids are tabulated and the recommended award is shaded.

*Non-Responsive Vendor

*Russo's Restaurant Equipment & Supply - The vendor did not submit the correct price sheet.

**Out of State Bidders

Blank - Vendor did not provide information.

***Not approved as alternates

No

No

Bill Carpenter

(845) 414-2230 govsales@culinarydepot.com steve@russoequip.com(941) 554-8315Steven Russo

Rita Croker

Sandra Bricker

Michael Sembroff

*Big Bend Restaurant Supply - The vendor did not submit the correct price sheet.

*Chef Depot - The vendor did not enter cost information in the price sheet.

DESCRIPTION OF ITB: Hillsborough County Public Schools is seeking bids from qualified bidders to establish firm pricing for delivered, uncrated and set-in place, large food service equipment.

Failure to file a protest within the time prescribed in section 120.57(3), Florida Statutes, or failure to post the bond or other security required by law within the time allowed for filing a bond shall constitute a waiver of proceedings under chapter 120, Florida Statutes.

COMPETITIVE SOLICITATION NUMBER & NAME: 25237-ITB-DST Food Service Large Equipment DATE OPENED: June 06, 2025 DEPARTMENT: Student Nutrition Services

RESPONDING VENDOR(S)

(813) 985-8870

(304) 327-0149

(305) 885-2484No Alex Ruiz

No

No

No

No

No

No

No

Yes

Yes

Yes

Yes

Yes

Yes

No

No

No

No

No

No

Lisa Newman

Rebecca Bergin

Eli Potash

Amy Leasure

(727) 796-5622

(407) 933-0555

(631) 501-9700

(954) 556-1401

(813) 983-2130

Paul Johnson governmentsales@samtell.com pjohnson@staffordsmith.com amy.leasure@trimarkusa.com cs@allure-hospitality.com rebecca@douglasequipment.us rcroker@beltram.com sandyb@johnson-lancaster.com michael@lebronrestaurantsupply.co bill.carpenter@bbrsupply.com

Attachment A mailto:cs@allure-hospitality.com mailto:bill.carpenter@bbrsupply.com mailto:rebecca@douglasequipment.us mailto:rcroker@beltram.com mailto:sandyb@johnson-lancaster.com mailto:michael@lebronrestaurantsupply.com mailto:governmentsales@samtell.com mailto:pjohnson@staffordsmith.com mailto:amy.leasure@trimarkusa.com mailto:governmentsales@samtell.com mailto:pjohnson@staffordsmith.com mailto:amy.leasure@trimarkusa.com mailto:cs@allure-hospitality.com mailto:rebecca@douglasequipment.us mailto:rcroker@beltram.com mailto:sandyb@johnson-lancaster.com mailto:michael@lebronrestaurantsupply.com mailto:bill.carpenter@bbrsupply.com

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

SKILLET, 30-GALLON TILTING – ELECTRIC (208/240 Volt) NOTE: Bid items 1-3 will be awarded together as a group and must be provided by one manufacturer.

• Provide with one (1) pan carrier.

• Provide with one (1) double pantry filler with 60" hose.

• Provide unit with a food strainer and manual tile.

• 2” Draw off valve.

each 2 Manufacturer: Cleveland Model No.: SEL-30-T1 208/240 volt, 1 or 3 Phase - Voltage to be specified when ordered

Vulcan - VE30 Therma-Tek - TTELTS- Accutemp - ALTES -

Cleveland SEL-30-T1 18 Months Limited Warranty

$22,850.00 * * *

SKILLET, 30-GALLON TILTING – ELECTRIC (440/480 Volt) NOTE: Bid items 1-3 will be awarded together as a group and must be provided by one manufacturer.

• Provide with one (1) pan carrier.

• Provide with one (1) double pantry filler with 60" hose.

• Provide unit with a food strainer and manual tilt.

• 2” Draw off valve.

each 1 Manufacturer: Cleveland Model No.: SEL-30-T1 440/480 volt, 3 Phase - Voltage to be specified when ordered

Vulcan - VE30 Therma-Tek - TTELTS- Accutemp - ALTES -

Cleveland SEL-30-T1 18 Months Limited Warranty

$22,850.00 * * *

SKILLET, 30-GALLON TILTING – GAS

NOTE: Bid items 1-3 will be awarded together as a group and must be provided by one manufacturer.

• Provide with one (1) pan carrier.

• Provide with one (1) double pantry filler with 60" hose.

• Provide unit with a food strainer and manual tilt.

• 2” Draw off valve.

each 5 Manufacturer: Cleveland Model No.: SGL-30-T1 Gas type to be specified when ordered (Non-Standing Pilot) 110 volt

Vulcan - VG30 Therma-Tek - TTELTS- 30B Accutemp - ALTGSE -

Cleveland SGL-30-T1 18 Months Limited Warranty

$29,999.00 * * *

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

DOUBLE CONVECTION OVEN – GAS

NOTE: Bid items 4-6 will be awarded together as a group and must be provided by one manufacturer.

• Electronic ignition with flame safety device.

• Stainless steel legs with bullet feet.

• Units to have individual gas supply shut-off for each deck.

• Each oven to be a minimum of 60,000 BTU's.

• Provide five (5) oven racks per deck.

each 10 Manufacturer: Southbend Model No.: PCG140S/SD Gas type to be specified when ordered 3/4" Gas, 115 volt 10 amps maximum per deck (Non- Standing Pilot)

Garland MCO-GS-20- S Baker's Pride - GDCO- G2 Duke - E102-G Southbend SLGS- 225C

Southbend

PCG140S/SD

1 Year Parts an Labors

$14,999.00 * * *

DOUBLE CONVECTION OVEN - ELECTRIC

NOTE: Bid items 4-6 will be awarded together as a group and must be provided by one manufacturer.

* Provide stainless steel front sides and top and louvered rear panel.

• Units to have solid state manual controls .

• Stainless steel legs with bullet feet.

• Units to have individual gas supply shut-off for each deck.

• Units to have two-speed fan control with minimum 1/3 hp motor.

• Provide five (5) oven racks per deck.

each 4 Manufacturer: Southbend Model No.: PCE22S/SD 208/240 volt, 1 or 3 Phase - Voltage to be specified when ordered

Garland MCO-ES-20-S Bakers Pride - GDCO- E2 Duke - E102-E Southbend SLES- 205C

Southbend

PCE22S/SD

1 Year Parts an Labors

$14,999.00 * * *

DOUBLE CONVECTION OVEN – ELECTRIC

NOTE: Bid items 4-6 will be awarded together as a group and must be provided by one manufacturer.

• Provide stainless steel front sides and top and louvered rear pane.

• Units to have solid state manual controls .

• Stainless steel legs with bullet feet.

• Units to have individual gas supply shut-off for each deck.

• Units to have two-speed fan control with minimum 1/3 hp motor.

• Provide five (5) oven racks per deck.

each 1 Manufacturer: Southbend Model No.: PCE22S/SD 440/480 volt 3 phase Voltage to be specified when ordered

Garland MCO-ES-20-S Duke - E102-E Bakers Pride - GDCO- E2 Southbend SLES- 205C

Southbend

PCE22S/SD

1 Year Parts an Labors

$14,999.00 * * *

INSULATED SS HOT CABINET

• Fully insulated cabinet keeps prepared foods at serving temperatures

• Stainless Steel Construction

• Dutch style solid doors

* Heavy-duty 5" swivel casters, two with brakes

* Warranty - 3-Year Parts / 1-Year Labor each 15 Manufacturer: Vulcan Model No.: VBP 18ES 120 volts, 1500 watts, 12.0 amps

Alto Sham Model No:

1000UP/STD

Cres Cor Model No.

H-137-SUA-12D

Vulcan VBP 18 ES 10 years Parts $7,750.00 * * *

SOLID SINGLE DOOR ROLL-THRU WARMING CABINET

NOTE: Bid items 8-9 will be awarded together as a group and must be provided by one manufacturer.

● Provides 8' Cord and Standard Plug

● Stainless Steel Exterior and Interior Door Liner

● Built-in adjustable humidity control vent

● Provides heavy cylinder lock and cam-lift hinges

● Stainless steel interior door liner

● 208-240v/60/1-ph each 2 Manufacturer: True Model No.: STG1HRT-1S- 1S

Submit technical information for consideration

True STG1HRT-1S-1S 7 year Parts and Labor

$8,675.00 * * *

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

SOLID DOUBLE DOOR ROLL-THRU WARMING CABINET

NOTE: Bid items 8-9 will be awarded together as a group and must be provided by one manufacturer.

● Provides 8' Cord and Standard Plug

* Stainless Steel interior and exterior

● Heavy-duty cam hinges and cylinder locks

● Adjustable door wiper gaskets

● Stainless steel interior door liner

● 208-240v/60/1-ph each 2 Manufacturer: True Model No.: STG2HRT-2S- 2S

Submit technical information for consideration

True STG2HRT-2S-2S 7 year Parts and Labor

$12,500.00 * * *

ICE MACHINE (W/BIN & WATER FILTRATION SYSTEM)

NOTE: Bid items 10-12 will be awarded together as a group and must be built by one manufacturer

• Unit and bin to be of stainless steel construction. Bin liner to be of polyethylene material.

• Ice making capacity of approximately 420# per 24 hours as defined by ARI.

• Bin capacity of approximately 385 # as rated by ARI.

• Provide filtration system and any and all kits to mount icemaker to bin.

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor.

each 10 Manufacturer: Manitowoc* Model No.IDTO450A-161/D- 400 With Water Filter Assembly Elementary School 120 volt (preferred) or 208/240 volt 1 phase

Manufacturer:

ICETRO

Model No.IM-0460/IB- 033 With Water Filter

(400) Assembly Elementary School 120 volt (preferred) or 208/240 volt 1 phase

ICE MACHINE (W/BIN & WATER FILTRATION SYSTEM)

NOTE: Bid items 10-12 will be awarded together as a group and must be built by one manufacturer.

• Unit and bin to be of stainless steel construction. Bin liner to be of polyethylene material.

• Ice making capacity of approximately 635# per 24 hours as defined by ARI.

• Bin capacity of approximately 510 # as rated by ARI.

• Provide filtration system and any and all kits to mount icemaker to bin.

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor.

each 10 Manufacturer: Manitowoc* Model No. IDT-0620A /D- 570 With Water Filter Assembly Middle/ High Schools 115 volt or 208/230 volt 1 phase

Manufacturer:

ICETRO

Model No. IM-0750/IB- 044 With Water Filter (400)Assembly Middle/ High Schools 115 volt or 208/230 volt 1 phase

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

ICE MACHINE (W/BIN & WATER FILTRATION SYSTEM)

NOTE: Bid items 10-12 will be awarded together as a group and must be built by one manufacturer.

• Unit and bin to be of stainless steel construction. Bin liner to be of polyethylene material.

• Ice making capacity of approximately 185# per 24 hours as defined by ARI

• Bin capacity of approximately 74# as rated by ARI

• Provide filtration system and any and all kits to mount icemaker to bin.

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor.

each 10 Manufacturer: Manitowoc* Model No. UDF-0140A With Water Filter Assembly Small Sites 115 volt

Submit technical information for consideration

ICE MACHINE HEAD & WATER FILTRATION SYSTEM

NOTE: Bid items 13-14 will be awarded together as a group and must be built by one manufacturer.

• Unit to be of stainless steel construction.

• Ice making capacity of approximately 635# per 24 hours as defined by ARI.

• Provide filtration system and any and all kits to mount icemaker to bin.

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor.

each 10 Manufacturer: Manitowoc* Model No. IDT-0620A With Water Filter Assembly Middle/ High Schools 115 volt or 208/230 volt 1 phase

Manufacturer:

ICETRO

Model No. IM-0750 With Water Filter (400)Assembly Middle/ High Schools 115 volt or 208/230 volt 1 phase

ICE MACHINE HEAD & WATER FILTRATION SYSTEM

NOTE: Bid items 13-14 will be awarded together as a group and must be built by one manufacturer.

• Unit to be of stainless steel construction.

• Ice making capacity of approximately 420# per 24 hours as defined by ARI.

• Provide filtration system and any and all kits to mount icemaker to bin.

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor.

each 10 Manufacturer: Manitowoc* Model No.IDTO450A-161 With Water Filter Assembly Elementary School 120 volt (preferred) or 208/240 volt 1 phase

Manufacturer:

ICETRO

Model No.IM-0460 With Water Filter

(400) Assembly Elementary School 120 volt (preferred) or 208/240 volt 1 phase

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

ICE MACHINE BIN - 30" WIDE

NOTE: Bid items 15-16 will be awarded together as a group and must be built by one manufacturer.

• Bin to be of stainless steel construction. Bin liner to be of polyethylene material.

• Bin capacity of approximately 532 lbs. of ice as rated by ARI

• Stay-open door

• Internal Scoop Holder each 6 Manufacturer: Manitowoc Model No.: D-570

Ice-O-Matic B55PS * * *

ICE MACHINE BIN - 30" WIDE

NOTE: Bid items 15-16 will be awarded together as a group and must be built by one manufacturer.

• Bin to be of stainless steel construction. Bin liner to be of polyethylene material.

• Bin capacity of approximately 365 lbs. of ice as rated by ARI

• Stay-open door

• Internal Scoop Holder each 6 Manufacturer: Manitowoc Model No.: D-400

Ice-O-Matic B55PS * * *

REFRIGERATED COUNTER TOP, SANDWICH

• Two (2) section refrigerated base with self-closing doors

• Stainless steel case, top, and doors. Aluminum ends and ABS interior

* LID Stainless steel flat lid assembly-flat lid pair

• Foamed in place polyurethane insulation

• Provide 10” plastic cutting board

• Provide 8' cord and plug set

• Provide heavy-duty 5” swivel casters, front two (2) with brakes

• Provide at least 1/3 hp compressor

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor each 2 Manufacturer: Bev Air Model No.: SPE60-24M 115 volt / 10.25 amps 1 phase

Continental

SW60-24M

Traulsen

UST6024-LR

Bev Air SPE60-24M 7 Years Parts and Labor

$5,785.00 * * *

SELF SERVICE HEATED COUNTERTOP DISPLAY SHELF

*Countertop horizontal model *120/208 volt/ 1 Phase *Two (2) shelves *24 adjustable product divider rods *Thermostatically controlled heated base *Infrared top heat *Temperature range: 185-200 degrees F *Tempered glass side panels *Incandescent bulbs are coated and shatter resistant *Mounted on 4" legs *Approximately 38" wide X 27" deep X 29" high each 5 Manufacturer: Nemco Model No.:6480-36H

Submit technical information for consideration

Nemco 6480-36H 2 Years Parts and Labor

$3,850.00 * * *

MIXER 20 QUART

• Provide timed unit with all standard equipment:

• One (1) 21 qt. Stainless Steel Bowl

• One (1) Flat Beater

• One (1) Stainless Steel Wire Whip

• One (1) S/S Dough Hook

• Provide, also: One (1) Splash Cover w/Bowl Extension Ring

• Provide with manufacturer’s Stainless Steel stand without casters.

• Warranty - Minimum 3 years on all parts and two (2) years labor and repairs.

each 1 Manufacturer: Varimixer Model No.: V20 (with 312GS vegetable cutter attachment ) Pertinent Data: Bench Style Utilities Required.: 115V, 1 HP (6' cord & plug furnished)

Submit technical information for consideration

Varimixer V20 1 Year Parts an Labors

$7,875.00 * * *

RANGE, 2-BURNER – GAS

NOTE: Bid items 20-23 will be awarded together as a group and must be built by one manufacturer.

• 12" (2) 30,000 BTU burners.

• Spark igniter with flame safety device for all burners.

• 4 flanged feet with mounting plates

• Provide stainless steel back guard with high shelf

• Stainless steel legs, sides and flanged feet each 2 Manufacturer: Vulcan Model No. 12-2B Gas type to be specified when ordered (Natural or LP)

Submit technical information for consideration

Vulcan 12-2B 18 Months Limited Warranty

$5,875.00 * * *

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

RANGE, 2-BURNER – ELECTRIC

NOTE: Bid items 20-23 will be awarded together as a group and must be built by one manufacturer.

• Stainless steel legs, sides and flanged feet.

• Provide stainless steel back guard with high shelf.

• Stainless steel front rail.

each 2 Manufacturer: Vulcan Model No. EV12-

1HT208/240

208/240-volt 1 or 3 phase

Submit technical information for consideration

Vulcan EV12-

1HT208/240

18 Months Limited Warranty

$6,350.00 * * *

RANGE, 4-BURNER – GAS

NOTE: Bid items 20*23 will be awarded together as a group and must be built by one manufacturer.

• Provide with rear gas connection and end caps.

• ¾” gas pressure regulator (gas type to be specified)

• Stainless steel legs, sides and feet.

• Provide stainless steel back guard.

• Stainless steel front rail.

each 2 Manufacturer: Vulcan Model No.: 24S-4BN Gas type to be specified when ordered (Natural or LP) (Non-Standing Pilot)

Submit technical information for consideration

Vulcan 24S-4BN 18 Months Limited Warranty

$5,300.00 * * *

RANGE, 4-BURNER – ELECTRIC

NOTE: Bid items 20-23 will be awarded together as a group and must be built by one manufacturer.

• 208v/60/3-ph.

• 24" (4) 2.0 kw French hotplates.

• 9 1/2" solid cast iron, infinite controls.

• Stainless steel legs, sides and feet.

• Provide stainless steel back guard.

• Single deck stainless steel high shelf.

each 8 Manufacturer: Vulcan Model No.: EV24S-4FP-208 208 - 3 Phase

Submit technical information for consideration

Vulcan EV24S-4FP-

18 Months Limited Warranty

$12,975.00 * * *

RACK ROLL-IN REFRIGERATOR - 12 RACK

NOTE: Bid items 24-25 will be awarded together as a group and must be built by one manufacturer.

• Two (2) casters of the set of four shall have brakes.

• Bumpers not required.

• Must fit Traulsen/ Victory/ True/ and Delfield roll-thru cabinets (refrigerated and/or heated).

each 5 Manufacturer: Cres Cor Model No. 207-1812

Submit technical information for consideration

Cres Cor 207-1812 1 Year Parts an Labors

$1,599.00 * * *

RACK ROLL-IN REFRIGERATOR - 18 RACK

NOTE: Bid items 24-25 will be awarded together as a group and must be built by one manufacturer.

• Two (2) casters of the set of four shall have brakes.

• Bumpers not required.

• Must fit Traulsen/ Victory/ True/ and Delfield roll-thru cabinets (refrigerated and/or heated).

each 5 Manufacturer: Cres Cor Model No. 273-65-12/1818

Submit technical information for consideration

Cres Cor 273-65- 12/1818

1 Year Parts an Labors

$1,350.00 * * *

FREEZER REACH-IN 2-DOOR

NOTE: Bid items 26-27 will be awarded together as a group and must be provided by one manufacturer.

• Provide stainless steel doors with locks, stainless steel exterior, and aluminum interior.

• Cord set installed.

* Provide with six (6) shelves on each side.

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor.

each 5 Manufacturer: Continental Model No.: 2FNSA 115 volt, 11.7 amps

True

STA-2F-2S

Traulsen

ALT232NUT-FHS

Continental 2FNSA 7 Years Parts and Labor

$10,599.00 * * *

REFRIGERATOR, REACH-IN 2- DOOR

NOTE: Bid items 26-27 will be awarded together as a group and must be provided by one manufacturer.

• Provide stainless steel doors, exterior, and aluminum interior.

• Cord set installed.

• Provide with six (6) shelves on each side.

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor.

each 5 Manufacturer: Continental Model No.: 2RNSA 115 volt, 10.0 amps

True

STR-2R-2S

Traulsen

AHT232NUT-FHS

Continental 2RNSA 7 Years Parts and Labor

$8,350.00 * * *

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

FREEZER REACH-IN 1-DOOR

NOTE: Bid items 28-29 will be awarded together as a group and must be provided by one manufacturer.

• Provide stainless steel doors with locks, stainless steel exterior, and aluminum interior.

• Cord set installed.

each 5 Manufacturer: Victory Model No: Versa

FS/FSA-1D-S1-HD-HC

Traulsen

ADT132KUT-HHS

True

STA1F-2HS-HC

True STA1F 7 year Parts and Labor

$9,350.00 * * *

REFRIGERATOR, REACH-IN 1 DOOR

NOTE: Bid items 28-29 will be awarded together as a group and must be provided by one manufacturer.

• Provide stainless steel doors with locks, stainless steel exterior, and aluminum interior.

• Cord set installed.

each 5 Manufacturer: Victory Model No: Versa-1D-HD-HC

Traulsen

AHT132KUT-HHS

True

STA1R-2HS-HC

True STA1R-2HS-HC 7 Years Parts and Labor

$7,800.00 * * *

SINGLE DOOR ROLL-THRU REFRIGERATOR - ELECTRIC

NOTE: Bid items 30-31 will be awarded together as a group and must be provided by one manufacturer.

● Provides 8" Cord and Plug

● Stainless steel doors with heavy-duty cam hinges and cylinder locks

● Stainless Steel exterior and interior

● Stainless steel interior door liner

● 115v/60/1-ph each 2 Manufacturer: True Model No: STG1RRT-1S-1S

Submit technical information for consideration

True STG1RRT-1S-1S 7 Years Parts and Labor

$8,999.00 * * *

DOUBLE DOOR ROLL-THRU REFRIGERATOR - ELECTRIC

NOTE: Bid items 30-31 will be awarded together as a group and must be provided by one manufacturer.

● Provides 8" Cord and Plug

● Steel doors with heavy-duty cam hinges and cylinder locks

● Stainless Steel exterior and interior

● Stainless steel interior door liner

● 115v/60/1-ph each 2 Manufacturer: True Model No: STG2RRT-2S-2S

Submit technical information for consideration

True STG2RRT-2S-2S 7 Years Parts and Labor

$12,975.00 * * *

COMBI-OVEN, ELECTRIC

NOTE: Bid items 32-34 will be awarded together as a group and must be built by one manufacturer.

• Provide all stainless steel units on stand with pan slides.

• Provide five (5) stainless steel wire shelves.

*Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

• Stainless steel interior, exterior, stand, and legs.

• Provide hand held hose for interior oven cleaning.

• Holds a minimum of 6 full size sheet pans

• One Side wall dimension must be less than 33 inches each 10 Manufacturer:

Convotherm* Model No.: K12

C4ET6.20EB-N DD

120 volt - 1 Phase or 208 vole -240 volt 3ph Voltage to be specified when ordered

Vulcan

ABC7E-208

Convotherm K12

C4ET6.20EB-N DD

2 Years Parts and Labor

$18,999.00 * * *

COMBI-OVEN, ELECTRIC

NOTE: Bid items 32-34 will be awarded together as a group and must be built by one manufacturer.

• Provide all stainless steel units on stand with pan slides.

• Provide five (5) stainless steel wire shelves.

*Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

• Stainless steel interior, exterior, stand, and legs.

• Provide hand held hose for interior oven cleaning.

• Holds a minimum of 6 full size sheet pans

• One Side wall dimension must be less than 33 inches each 10 Manufacturer:

Convotherm* Model No.: K12

C4ET6.20EB-N DD

440-480 volt 3 phase

Vulcan

ABC7E-208

Convotherm K12

C4ET6.20EB-N DD

2 Years Parts and Labor

$23,975.00 * * *

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

COMBI-OVEN, GAS

NOTE: Bid items 32-34 will be awarded together as a group and must be built by one manufacturer.

• Provide all stainless steel units on stand with pan slides.

• Provide five (5) stainless steel wire shelves.

*Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

• Stainless steel interior, exterior, stand, and legs.

• Provide hand held hose for interior oven cleaning.

• Holds a minimum of 6 full size sheet pans

• One Side wall dimension must be less than 33 inches each 10 Manufacturer:

Convotherm* Model No.: K12

C4ET6.20GB-N DD

Gas type to be specified when ordered (Non-Standing Pilot) 110 volt

Vulcan

ABC7G - NAT

Convotherm K12

C4ET6.20GB-N DD

2 Years Parts and Labor

$21,300.00 * * *

VENTLESS COMBI-OVEN, ELECTRIC

NOTE: Bid items 35-36 will be awarded together as a group and must be built by one manufacturer.

• Provide all stainless steel units on stand with pan slides.

• Provide five (5) stainless steel wire shelves.

*Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

• Stainless steel interior, exterior, stand, and legs.

• Provide hand held hose for interior oven cleaning.

each 2 Manufacturer: Alto-Shaam* Model No.: Prodigi 7-

20EVH

208 vole -240 volt 3ph Voltage to be specified when ordered

Submit technical information for consideration

VENTLESS COMBI-OVEN, ELECTRIC

NOTE: Bid items 35-36 will be awarded together as a group and must be built by one manufacturer.

• Provide all stainless steel units on stand with pan slides.

• Provide five (5) stainless steel wire shelves.

*Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

• Stainless steel interior, exterior, stand, and legs.

• Provide hand held hose for interior oven cleaning.

each 2 Manufacturer: Alto-Shaam* Model No.: Podigi 7-20EVH 440-480 volt 3 phase

Submit technical information for consideration

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

DOUBLE VENTLESS COMBI-OVEN, ELECTRIC

NOTE: Bid items 37-38 will be awarded together as a group and must be built by one manufacturer.

• Provide all stainless steel units on stand with pan slides.

• Provide five (5) stainless steel wire shelves.

*Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

• Stainless steel interior, exterior, stand, and legs.

• Provide hand held hose for interior oven cleaning.

each 2 Manufacturer: Alto-Shaam* Model No.: Prodigi 7-20/7-

20EVH

208 vole -240 volt 3ph Voltage to be specified when ordered

Submit technical information for consideration

DOUBLE VENTLESS COMBI-OVEN, ELECTRIC

NOTE: Bid items 37-38 will be awarded together as a group and must be built by one manufacturer.

• Provide all stainless steel units on stand with pan slides.

• Provide five (5) stainless steel wire shelves.

*Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

• Stainless steel interior, exterior, stand, and legs.

• Provide hand held hose for interior oven cleaning.

each 2 Manufacturer: Alto-Shaam* Model No.: Podigi 7-20/7-

20EVH

440-480 volt 3 phase

Submit technical information for consideration

STEAMER, SINGLE BOILERLESS ELECTRIC 208/240-VOLT

SINGLE OR THREE PHASE

NOTE: Bid items 39-41 will be awarded together as a group and must be built by one manufacturer.

• Provide countdown timer

• Provide on stainless steel deluxe stand

• Left hinged door *Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

each 5 Manufacturer: Groen Model No.: HY-5E Electric 208 volt 1 or 3 phase, 240 volt 1 or 3 phase

Cleveland Range Model No. 21-CET-16-

Groen HY-5E 1 Year Parts an Labors

$16,600.00 * * *

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

STEAMER, SINGLE BOILERLESS ELECTRIC 408-VOLT THREE

PHASE

NOTE: Bid items 39-41 will be awarded together as a group and must be built by one manufacturer.

• Provide countdown timer

• Provide on deluxe stainless steel stand

• Left hinged door *Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

each 2 Manufacturer: Groen* Model No.: HY-5E Electric 480 volt 3 phase

Cleveland Range Model No. 21-CET-16-

Groen HY-5E 1 Year Parts an Labors

$16,600.00 * * *

STEAMER, SINGLE BOILERLESS GAS

NOTE: Bid items 39-41 will be awarded together as a group and must be built by one manufacturer.

• Provide countdown timer

• Provide on stainless steel stand

• Left hinged door *Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

each 5 Manufacturer: Groen* Model No.: HY-5G Gas type to be specified when ordered (Non-Standing Pilot) Natural or LP, 120 volt plug

Cleveland Range Model No. 21CGA5

Groen Hy-5G 1 Year Parts an Labors

$18,500.00 * * *

STEAMER STACKED BOILERLESS - NATURAL GAS

NOTE: Bid items 42-45 will be awarded together as a group and must be built by one manufacturer.

● 120v, 15 Amps, 1-phase

● 116,000 Total BTU min.

● 2 separately controlled 5-pan compartments

● Manual and auto post-cook holding options

● Stainless steel interior and exterior with continuous door hinges

● Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

each 2 Manufacturer: Groen* Model No.: (2)HY-5G

Cleveland Range Model No.

24CGA10.2ES

Groen Hy-5G 1 Year Parts an Labors

$37,500.00 * * *

STEAMER STACKED BOILERLESS - PROPANE GAS

NOTE: Bid items 42-45 will be awarded together as a group and must be built by one manufacturer.

● 120v, 15 Amps, 1-phase

● 116,000 Total BTU min.

● 2 separately controlled 5-pan compartments

● Manual and auto post-cook holding options

● Stainless steel interior and exterior with continuous door hinges

● Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

each 2 Manufacturer: Groen* Model No.: (2)HY-5G

Manufacturer:

Cleveland Model No.:

24CGA10.2ES LP

Groen HY-5G 1 Year Parts an Labors

$37,500.00 * * *

STEAMER STACKED BOILERLESS - ELECTRIC - 208/240

VOLT NOTE: Bid items 42-45 will be awarded together as a group and must be built by one manufacturer.

● 208v-240v/60 Hertz/3-ph and 1-ph options

● 24 Kilowatts

● 2 separately controlled 5-pan compartments

● manual and auto post-cook holding options

● Stainless steel interior and exterior with continuous door hinges

● Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

each 2 Manufacturer: Groen* Model: (2)HY5EF

Cleveland Range Model No. 24CEA10-

Groen HY5EF 1 Year Parts an Labors

$32,000.00 * * *

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

STEAMER STACK BOILERLESS - ELECTRIC - 480 VOLT

NOTE: Bid items 42-45 will be awarded together as a group and must be built by one manufacturer.

● 480v/60 Hertz/3-ph and 1-ph options

● 24 Kilowatts

● 2 separately controlled 5-pan compartments

● manual and auto post-cook holding options

● Stainless steel interior and exterior with continuous door hinges

● Unit pricing to Include Everpure Kleensteam II Twin scale and lime filter system.

each 2 Manufacturer: Groen* Model: (2)HY5EF

AccuTemp E64803E140

Groen HY5EF 1 Year Parts an Labors

$32,700.00 * * *

DUNNAGE RACK 12" X 36"

*1500 lb. weight capacity *Slotted - allows for maximum air circulation *Keeps items a safe 12" off the floor *12" high X 21" deep X 36" wide each 8 Manufacturer: Cambro Model No.: DRS360480

Submit technical information for consideration

DUNNAGE RACK, 18" X 24"

NOTE: Bid items 47-52 will be awarded together as a group and must be provided by one manufacturer.

• Each unit to have four (4) 12" posts, a three sided frame and one

(1) heavy-duty rack shelf constructed of 1" square tubing.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 5 Manufacturer: NewAge Ind.

Model No. 2029

Submit technical information for consideration

New Age 2029 15 and 5 Year Warranty

$139.99 * * *

DUNNAGE RACK, 18" X 36"

NOTE: Bid items 47-52 will be awarded together as a group and must be provided by one manufacturer.

• Each unit to have four (4) 12" posts, a three sided frame and one

(1) heavy-duty rack shelf constructed of 1" square tubing.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 5 Manufacturer: NewAge Ind.

Model No.: 2020

Submit technical information for consideration

New Age 2020 15 and 5 Year Warranty

$169.99 * * *

DUNNAGE RACK, 18" X 48"

NOTE: Bid items 47-52 will be awarded together as a group and must be provided by one manufacturer.

• Each unit to have four (4) 12” post, a three sided frame and one

(1) heavy-duty rack shelf constructed of 1” square tubing.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 5 Manufacturer: NewAge Ind.

Model No.: 2021

Submit technical information for consideration

New Age 2021 15 and 5 Year Warranty

$207.99 * * *

DUNNAGE RACK, 24" X 36"

NOTE: Bid items 47-52 will be awarded together as a group and must be provided by one manufacturer.

• Each unit to have (4) 12” post, a three sided frame and (1) heavy-duty rack shelf constructed of 1” square tubing.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 5 Manufacturer: NewAge Ind.

Model No.: 6008

Submit technical information for consideration

New Age 6008 15 and 5 Year Warranty

$153.99 * * *

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

DUNNAGE RACK, 24" X 48"

NOTE: Bid items 47-52 will be awarded together as a group and must be provided by one manufacturer.

• Each unit to have four (4) 12” post, a three sided frame and one

(1) heavy-duty rack shelf constructed of 1” square tubing.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 10 Manufacturer: NewAge Ind.

Model No.: 6009

Submit technical information for consideration

New Age 6009 15 and 5 Year Warranty

$165.99 * * *

MOBILE DUNNAGE RACK, 18" X 36"

NOTE: Bid items 47-52 will be awarded together as a group and must be provided by one manufacturer.

• Each unit to have four (4) 8” posts, a three sided frame and one

(1) heavy-duty rack shelf constructed of 1” square tubing.

Must include handle.

• Provide four (4) 5” casters, two (2) with brakes.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 10 Manufacturer: New Age Model No.: 1202

Submit technical information for consideration

New Age 1202 15 and 5 Year Warranty

$405.99 * * *

STORAGE UNIT, 18" X 24"

NOTE: Bid items 53-57 will be awarded together as a group and must be built by one manufacturer.

• Furnish as per manufacturer's standard specifications and the following:

• Each unit to have four (4) 72” posts and five (5) 18” x 24” shelves.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 20 Manufacturer: Eaglegard Model No. 1824E and P74-E- X

Submit technical information for consideration

STORAGE UNIT, 18" X 36"

NOTE: Bid items 53-57 will be awarded together as a group and must be built by one manufacturer.

• Furnish as per manufacturer's standard specifications and the following:

• Each unit to have four (4) 72” posts and five (5) 18” x 36” shelves.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 20 Manufacturer: Eaglegard Model No. 1836E-C/P74-E- C

Submit technical information for consideration

STORAGE UNIT, 18" X 48"

NOTE: Bid items 53-57 will be awarded together as a group and must be built by one manufacturer.

• Furnish as per manufacturer's standard specifications and the following:

• Each unit to have four (4) 72” posts and five (5) 18” x 48” shelves.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 10 Manufacturer: Eaglegard Model No.: 1848E-C/P74

EC

Submit technical information for consideration

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

STORAGE UNIT, 18" X 60"

NOTE: Bid items 53-57 will be awarded together as a group and must be built by one manufacturer.

• Furnish as per manufacturer's standard specifications and the following:

• Each unit to have four (4) 72” posts and five (5) 18” x 60” shelves.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 10 Manufacturer: Eaglegard Model No.: 1860E-C/P74-E- C

Submit technical information for consideration

STORAGE UNIT, 18" X 72"

NOTE: Bid items 54-57 will be awarded together as a group and must be built by one manufacturer.

• Furnish as per manufacturer's standard specifications and the following:

• Each unit to have four (4) 72” posts and five (5) 18” x 72” shelves.

• Components to have a fifteen (15) year finish warranty against rust and corrosion and a five (5) year warranty against manufacturer defects.

each 10 Manufacturer: Eaglegard Model No.: 1872E-C/P74-E- C

Submit technical information for consideration

CAM GOBOX, 25 3/16" X 17 1/4" X 24 9/16"

• Made from lightweight expanded polypropylene material

• Must be able to stack no more than two units

• Pricing will reflect the cost of two (2) individual units, one (1) adjustable and locking strap, one (1) dolly with swivel and locking casters. This will be considered as one (1) unit each 5 Manufacturer: Cambro* Model No. EPP400110 X 2

CD3253EPP158 X 1

Pricing must reflect the cost of two (2) units, one

(1) adjustable and locking strap and one (1) dolly with swivel and locking casters

Submit technical information for consideration

Cambro EPP400110

X 2 CD3253PP158 X 1

1 Year Parts an Labors

$1,460.00 * * *

WORKTABLE (W/UNDERSHELF & DRAWERS) 30” X 60”

NOTE: Bid items 59-60 will be awarded together as a group and must be built by one manufacturer.

• Unit pricing to include a set of four (4) TA-25 heavy-duty 5" caster wheels - Two swivel and two with brakes *Tabletop to have turned-down edges (4-sides) 14-gauge (type 304 with no. 4 finish)

• Provide stainless steel bullet adjustable feet

• Provide one (1) 20” X 20” X 5” stainless steel drawer on stainless steel ball bearing slides

• Provide one (1) 15” X 20” X 5” stainless steel drawer on stainless steel ball bearing slides

• Provide 18 gauge, type 430 undershelf with No. 4 finish

• All welded construction and with no assembly required each 1 Manufacturer: Advance Tabco* Model No.: TSS 305

Submit technical information for consideration

WORKTABLE (W/UNDERSHELF & DRAWERS) 30” X 72”

NOTE: Bid items 59-60 will be awarded together as a group and must be built by one manufacturer.

*Unit pricing to include a set of four (4) TA-25 heavy-duty 5" caster wheels - Two swivel and two with brakes

• Tabletop to have turned-down edges (4-sides) 14-gauge (type 304 with no. 4 finish)

• Provide stainless steel bullet adjustable feet.

• Provide one (1) 20” X 20” X 5” stainless steel drawer on stainless steel ball bearing slides.

• Provide one (1) 15” X 20” X 5” stainless steel drawer on stainless steel ball bearing slides.

• Provide 18 gauge, type 430 undershelf with No. 4 finish.

• All welded construction and with no assembly required each 1 Manufacturer: Advance Tabco* Model No.: TSS-306

Submit technical information for consideration

Item No.

Item Specifications - Furnish as per Manufacturer's Standard Specifications and any additional features as follows:

Unit of Measure

Estimated Quantity Approved Brand

"OR EQUAL"

Acceptable Alternate(s)

Indicate the Manufacturer Name and Model Number of Unit Being Bid

Provide Actual Warranty

Information

Delivered Cost per Unit of Measure

Indicate the Manufacturer

Name and Model Number of Unit

Being Bid

Provide Actual

Warranty Information

Delivered Cost per Unit of

Measure

ITB # 25237-ITB-DST Food Service Large Equipment Allure Hospitality Supplier Inc *Big Bend Restaurant Supply

MILK COOLER DUAL ACCESS-8 CASE CAPACITY

NOTE: Bid items 61-63 will be awarded together as a group and must be built by one manufacturer.

• Stainless steel interior and exterior.

• Provide with door locking device.

• Must maintain a maximum temperature between 36° and 41° F.

for up to 4 hours with the lids open. Must meet the guidelines of NSF Standard 7.

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor.

each 2 Manufacturer: True Model No.: TMC-34-S-DS-

SS

Pertinent Data: 8 CASE

CAPACITY

Utilities Required.: 115 volt 1 phase with cord and plug

Continental

MC3NSSD

Traulsen RMC34D4

True TMC-34-S-DS-

SS

Seven Year Part Warramty

$5,699.00 * * *

MILK COOLER DUAL ACCESS-12 CASE CAPACITY

NOTE: Bid items 61-63 will be awarded together as a group and must be built by one manufacturer.

• Stainless steel interior and exterior.

• Provide with door locking device.

• Must maintain a maximum temperature between 36° and 41° F.

for up to 4 hours with the lids open. Must meet the guidelines of NSF Standard 7.

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor.

each 2 Manufacturer: True Model No.: TMC-49-S-DS-

SS

Pertinent Data:

12-CASE CAPACITY

Utilities Required.: 115 volt 1 phase with cord and plug

Continental

MC4NSSD

Traulsen RMC49D4

True TMC-49-S-DS-

SS

Seven Year Part Warramty

$6,500.00 * * *

MILK COOLER DUAL ACCESS-16 CASE CAPACITY

NOTE: Bid items 61-63 will be awarded together as a group and must be built by one manufacturer.

• Stainless steel interior and exterior.

• Provide with door locking device.

• Must maintain a maximum temperature between 36° and 41° F.

for up to 4 hours with the lids open. Must meet the guidelines of NSF Standard 7.

• Provide 8’ cord and plug set.

• Warranty - Minimum one (1) year parts and labor on complete machine plus five (5) years on compressor.

each 5 Manufacturer: True Model No.: TMC-58-S-DS-

SS

Pertinent Data: 16 CASE

CAPACITY

Utilities Required.: 115volt 1 phase with cord and plug

Continental

MC5NSSD

Traulsen RMC58D4

True TMC-58-S-DS-

SS

Seven Year Part Warramty

$6,999.00 * * *

CUSTOM BREAKFAST CART

• 24" x 48" custom breakfast cart

• Easy to maneuver throughout school hallways

* One (1) 24" high x 8' long wrap around custom "Breakfast In Classroom" (BIC) logo graphic design skirt. Velcro strips used to attached skirt to cart.

* Two (2) front poles measuring 78" high

* Two (2) back poles measuring 34" high

* Two (2) shelves 24" wide x 48" long

* One (1) computer holder mounted to pole

• Four (4) swivel steam 5" casters with brakes for easy rolling and secure positioning

• One (1) two-sided standard BIC "Grab-N-Go" banner/sign 18" wide x 48" long each 1 Manufacturer: Metro Custom Breakfast Cart Model No. EE1344B

Submit technical information for consideration

Metro GG2448 1 Year Parts an Labors

UTILITY CART - TWO SHELVES

• Two (2) .080” Aluminum shelves with raised…