Questions and Answers.docx

DOCX document 11 KB Posted

Attached to
Gangway and Rotating Turntable Fabrication - Bell M. Shimada
Solicitation number
NM-AN2120-23-01425
Issued by

About this file

Written by GovTribe AI ·

This document contains questions and answers regarding a federal solicitation for the fabrication of a gangway and rotating turntable. The solicitation is being conducted by the Department of Commerce National Oceanic and Atmospheric Administration under number NM-AN2120-23-01425. The questions and answers specify that while the gangway frame must be constructed from marine grade aluminum alloy 5086, alloy 5052 may be used for the gangway treads.

View the file

Other files

File Type Posted
SN-2023 -Gangway SH.pdf PDF
ISO-5488-2015.pdf PDF
SH gangway.pdf PDF
ISO-7061-1993.pdf PDF
Offshore_Access_Gangways_Guide_e.pdf PDF
MSC.1Circ. 1331 Guidelines for construction installation maintenance and inspectionsurvey of means.pdf PDF
FAC 23-04 Provisions and Clauses.docx DOCX document
Statement of Need.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Questions and Answers

Q1.) On the statement of need under general requirements, 4.1.3 states that the gangway and turn table shall be constructed from marine grade aluminum alloy 5086. For the gangway tread, would it be acceptable to use 5052 aluminum alloy instead? The frame of the gangway would still be 5086 of course.

A1.) Using 502 alloy for the treads is acceptable.

File details come from the government source that posted it. Updated .