NGCE-RAM-20250525.pdf
PDF 63 KB Posted
- Attached to
- LOAD FRAMES Federal contract opportunity
- Solicitation number
- N0017326Q5217
About this file
This is an engineering drawing for Wiffle Tree Components produced by the U.S. Naval Research Laboratory located at Trumbo Point Annex, Building F15, Key West, Florida. The drawing specifies three linkage assemblies designated as Long Leg (-1/-6), Mid Leg (-2/-5), and Short Leg (-3/-4), with detailed dimensional specifications and tolerance requirements. The components are manufactured from 17-4PH H1150 stainless steel material with a finished coat specification.
The drawing provides precise dimensional requirements for three distinct component variations, each featuring multiple through-holes with specified diameters and tolerances. The Long Leg component contains three holes at 1.515±.005 inches diameter; the Mid Leg also contains three holes at 1.515±.005 inches diameter; the Short Leg contains three holes at 1.015±.005 inches diameter. Additional geometric details specify width dimensions of .450±.003 inches for Long and Mid Legs and .330±.003 inches for the Short Leg. The drawing is model-based and references a solid model for comprehensive dimensional data, with all dimensions specified in inches and geometric dimensioning and tolerancing in accordance with ASME Y14.5-2009. Standard tolerancing applies: ±0.1 inches for single decimal places, ±0.03 inches for two decimal places, and ±0.010 inches for three decimal places, with angular tolerances of ±5.0 degrees. Burrs must be removed and sharp edges broken per specification requirements.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - N0017326Q5217.pdf | ||
| NGCE-RAM-20250512.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
.450±.003
3X 1.515±.005 THRU ALL
-1 LONG LEG
.450±.003
3X 1.515±.005 THRU ALL
-2 MID LEG
.330±.003
3X 1.015±.005 THRU ALL
-3 SHORT LEG
2X 1.515±.005 THRU ALL
1.015±.005 THRU ALL
1.515±.005 THRU ALL
1.015±.005 THRU ALL
1.515±.005 THRU ALL
.813±.003 .813±.003
.813±.003
THIS IS A MODEL-BASED DRAWING. REFER TO SOLID MODEL FOR ALL DIMENSIONS. UNLESS 1.
OTHERWISE SPECIFIED ON THE FIELD OF THE DRAWING.
DIMENSIONAL REQUIREMENTS ON THE FIELD OF THE DRAWING SHALL BE INSPECTED.2.
UNLESS OTHERWISE SPECIFIED
APPLIES.3.
REMOVE BURRS AND BREAK SHARP EDGES.4.
-4
LINKAGE, SHORT LEG
-5
LINKAGE, MID LEG
-6
LINKAGE, LONG LEG
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
X.X 0.1
X.XX 0.03
X.XXX 0.010
ANGULAR: 5.0
TITLE:
SIZE
B
DWG. NO. REV
WEIGHT: SCALE: 1:4
A
SHEET 1 OF 1
TRUMBO POINT ANNEX
BUILDING F15
KEY WEST, FL 33041
COMPONENTS, WIFFLE
TREE
NGCE-RAM-20250525
Released
SEE PDM FOR
RESP. ENGR.
AND APPROVALS
GD&T IN ACCORDANCE
WITH: ASME Y14.5-2009
COAT
FINISH
MATERIAL 17-4PH H1150
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
| Drawing View4 |
| Drawing View5 |
| Drawing View6 |
| Drawing View7 |
| Drawing View8 |
| Drawing View9 |
| Drawing View12 |
| Drawing View13 |
| Drawing View14 |
File details come from the government source that posted it. Updated .