New Lab Tables SOW (1).docx

STATEMENT OF WORK

For Purchase and Installation of fifty-five (55) 48"W x 30"D Tables, HNI, Building 1607 Location Building: Room 174 15 Eglin St, Building 1607, Hanscom AFB, MA 01731 By: Eric Brimhall, GS-13

DATED: 30 JAN 25

1. GENERAL INFORMATION:

This project is intended to purchase and install fifty-five (55), 48” W x 30” D fixed work surface tables, in accordance with all applicable National, Air Force, State and local building codes and regulations. This work will consist of supplying/furnishing all labor, materials, tools, equipment, shop drawings, and expenses necessary to accomplish the work described below in compliance with the Commonwealth of Massachusetts Building Code and Massachusetts General Law requirements, Unified Facilities Criteria (UFC) state and federal codes, base standards and manufacturer’s instructions. Where there is a conflict between nationally recognized codes and local codes, the most stringent shall apply.

2. SCOPE: Purchase and Install fifty-five (55) 48” W x 30” D Fixed Work Surface Tables

· The contractor shall purchase, assemble and install 55 tables in room 174, Building 1607.

· The contractor is responsible to dispose of all contractor-generated waste.

· The contractor is responsible for field verifying model numbers, quantities and unit condition before installation begins.

· Specifications:

· 48” W x 30” D, Fixed Work Surface

· Cable Management

· Front Modesty Panels

· Stationary (not wheeled) legs that have threaded adjustable feet

· Underside splice/attachment plates to improve table alignment

· Tabletops of Tan/Wooden color

· Metal (not wooden or plastic) legs, gray in color

· NOTE – Current furnishings in room 174 will repurposed or recycled as appropriate by the Lantern staff before the target installation date.

3. GENERAL REQUIREMENTS:

Work includes, but is not limited to the following:

a) Provide resolutions of any technical problems that arise during the installation.

b) Should any change in scope be required, it must be coordinated with the Project POC and approved by the Contracting Officer prior to performing the change in work.

c) Provide updates to Project POC. Any installation issues, changes to schedule, or schedule slippages with justification must be reported at the periodic updates.

d) The Contractor is solely responsible for compliance with the Occupational Safety and Health Act of 1974 (OSHA) and the protection of their employees and all sub-contractor employees. In performing work under this contract on a Government installation, the contractor shall report any accidents involving Air Force property/equipment damage, or contractor personnel injuries occurring on the job or an accident resulting in death, injury, occupational disease, or adverse environmental impact to the contracting officer within five days.

e) Provide three (3) copies of O&M manuals and warranty letter

f) Period of Performance 90 days after award of contract

4. PLACE OF PERFORMANCE:

The purchase, receipt, installation, and operational check of all desks shall be in room 174 @ 15 Eglin St., Bldg. 1607, Hanscom AFB, MA 01731.

5. HOURS OF OPERATION:

Core Hours: 0730 – 1630 on Monday through Friday excluding Federal Holidays **Any changes to these hours shall be coordinated through the POC 72 hours in advance.

6. ADMINISTRATION:

Points of Contact (POC):

POC: Eric Brimhall, GS-13 Phone Number (781) 225-4719 Alternate POC: Stephen O’Neil, GS-12 Phone Number (781) 225-3482 Contracting Officer, Eva Leavitt at eva.leavitt@us.af.mil