Nederland_CO_Design Intent_Final_Phase 1_07.10.24.pdf

PDF 8 MB Posted Dec 9, 2024

Attached to: Fabrication and Installation for the Nederland, CO Wayfinding Proejct
Solicitation number: 2024-01
Issued by: Boulder County, Colorado

View the file

Other files

File	Type	Posted
LocationPlan_Nederland_FINAL_PHase 1_07.10.24.pdf	PDF	Dec 9, 2024
Message Sched_Nederland_CO_FINAL_PHASE 1_07.10.24.pdf	PDF	Dec 9, 2024

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Nederland , CO Wayfinding and Signage System

PHASE 1_V2

DESIGN INTENT DRAWINGS

July 10, 2024

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

Table of Contents

Section 1 – SIGN SYSTEM STANDARDS

A. Graphic Standards Typography Specifications ................................... A.1 Project Artwork ...................................................... A.5 Reflective and Opaque Vinyl Color Chart ........... A.6 Paint and Material Color Chart............................. A.6

B. Placement Guidelines Vehicular Signage .................................................. B.1 Lateral Clearance ................................................... B.2

Section 2 – SIGNAGE DRAWINGS

C. Menu of Sign Types

D. Design Intent Drawings VDIR.3 Vehicular Directional ................................ D.1 RES.1.2 Residential Directional ............................ D.2 PARK.ID Parking Identification ............................. D.3 PARK.1.1 Parking Directional ................................ D.4 PARK.1.2 Parking Directional ................................ D.5 KIOSK.1 Pedestrian Informational Kiosk............. D.6 KIOSK.2 Pedestrian Informational Kiosk ............ D.7 DIRECT.1 Business Directory ................................ D.8

E. Graphic Layouts

F. Construction Details VDIR.3, PARK.1.1, PARK. ID.1 Section Details ..... F.1 Direct Bury Details ................................................ F.2 Vinyl Detail ............................................................. F.3 Transpo polesafe Detail ........................................ F.4

G. Performance Specifications

Sign System StandardsSECTION 1

Graphic StandardsA

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction. Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be noti-fied of any variations from the dimensions and condi-tions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication. All copy shall be proofread by client and legal requirements checked by legal department.

MP07/10/24

NOTES

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

A.1

The Clearview typeface is the required message font for vehicular sign types

All type shall be set exactly as specified. Substitutions will only be accepted, at the DESIGNER’S discretion, where they match the specified typeface in every detail. The FABRICATOR should be aware that different versions of typesetting equipment may not satisfactorily match specified typefaces and in such instances will not be acceptable.

Typography Specifications

Clearview Highway

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890 ‘’!@#$%^

Amongst the several mechanical Arts that have engaged my attention, there is no one which I have pursued with so much steadiness and pleasure, as that of Letter Founding.

Downtown Downtown Downtown

123A 123A 123A acceptable NOT acceptable NOT acceptable acceptable NOT acceptable NOT acceptable

This apostrophe is CORRECT.

Clearview Highway

This apostrophe is INCORRECT.

Sometimes the Foot mark is mistaken for an apostrophe and an inch mark is mistaken for quotations. Below are examples of correct and incorrect apostrophes for each typeface.

PARK’S

PARK'S

TYPEFACE FOR: VEHICULAR GUIDE SIGNS

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

A.2

NOTES

Nederland,CO Wayfinding Program

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication.

Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.

4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

Typography Specifications

Gill Sans - Bold

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz 1234567890 !@#$%^ Amongst the several mechanical Arts that have engaged my attention, there is no one which I have pursued with so much steadiness and pleasure, as that of Letter Founding.

Downtown Downtown Downtown

123A 123A 123A acceptable NOT acceptable NOT acceptable acceptable NOT acceptable NOT acceptable

Gill Sans- Regular

ABCDEFGHIJKLMNOPQRSTUVWXYZ

Downtown Downtown Downtown

123A 123A 123A acceptable NOT acceptable NOT acceptable acceptable NOT acceptable NOT acceptable

TYPEFACE FOR: PARKING SIGNS, PEDESTRIAN SIGNS &

VEHICULAR SIGNS

’ This apostrophe is CORRECT.

Gill Sans Bold

This apostrophe is INCORRECT.

Sometimes the Foot mark is mistaken for an apostrophe and an inch mark is mistaken for quotations. Below are examples of correct and incorrect apostrophes for each typeface.

PARK’S

PARK'S

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

A.3

NOTES

Nederland,CO Wayfinding Program

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication.

Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.

4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

Typography Specifications

Gill Sans Nova Inline - Regular

ABCDEFGHIJKLMNOPQRSTUVWXYZ

Downtown Downtown Downtown

123A 123A 123A acceptable NOT acceptable NOT acceptable acceptable NOT acceptable NOT acceptable

TYPEFACE FOR: PARKING SIGNS, PEDESTRIAN SIGNS &

VEHICULAR SIGNS

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

A.4

NOTES

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

Typography Specifications

Individual spacing of each letter needs to be evaluated. All copy shall be kerned so that each character is optically centered between the center of each of the surrounding characters.

Nederland Nederland

SIGN TEXT STAND ARD S

LETTER-SPACING

IMPORTANT: Individual spacing of each letter needs to be evaluated. See Examples Above.

Kern all Copy so that each character is optically centered between the center of each of the surrounding characters.

TYPEFACE 1 TYPEFACE 1

TYPEFACE 2 TYPEFACE 2

Inconsistencies in Letter Spacing Corrected Letter Spacing

X baselinebaselineEjklHEjklH

COPY HEIGHT

When measuring copy height, measure only the height of the Capital letters to determine your overall copy height (shown in illustration below as “X”) Some of the other letters have an extended height beyond the average height of the letters.

baselinebaseline baselinebaseline

EjklHEjklH EjklHEjklH

LINE SPACING

When measuring line spacing, always measure from the baseline of the topmost text line to the baseline of the text line below (shown as “X”)

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

NOTES

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

A.5

All artwork pictured on this page will be provided to the sign fabricator by the designer and/or client. This artwork must be used for all sign applications in this provided documentation. Do NOT substitute with any other artwork!

Project Artwork

PICTOGRAPH

Utilized in Vehicular & Pedestrian signage

ARTWORK

Utilized in vehicular and pedestrian signage

ARROWS

Utilized in Vehicular & Pedestrian Directional signage

Up-Left ArrowLeft Arrow Straight Arrow Up-Right Arrow Right Arrow

Straight-Left Arrow Up-Straight-Left Arrow Up-Straight-Right Arrow Straight-Right Arrow

USE of Arrows

Straight Arrow

Left Arrow

Right Arrow

When multiple directions are required on a sign, the following directional hierarchy shall take precedent. See Example below.

Reference Message Schedule for individual Messages.

Visitor Info Raquet Ball Ice skating Hiking TrailPublic Parking Skateboarding Library

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

A.6

NOTES

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

Color Chart

SAMPLE SUBMITTALS:

The FABRICATOR must submit three (3) identical sets of each color specified for approval prior to any painting. Sample paint swatches must be produced on .080" aluminum sheet, approximately 3" x 6", including primer and free of defects. Sample material swatches should be the same approximate size.

Samples MUST have project and color specifications attached to back side.

The colors must look exactly the same every time they are used so that people associate them with the City of Nederland Wayfinding Program. All media, vinyl, paint, and inks must be produced so that the colors match as specified on this page.

R REFLECTIVE VINYL NAME SPECIFICATION APPLICABLE PROCESS

White

3M High Intensity Prismatic Reflective Sheeting 3930 Color: Pantone® White

3M High Intensity Prismatic Reflective Sheeting 3930 To match CMYK: C:91 , M:74, Y:53, K:60

3M High Intensity Prismatic Reflective Sheeting 3930 To match CMYK: C:52 , M:32, Y:51, K:5

3M Scotchcal ElectroCut Opaque Vinyl Film 7725-10 White

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Knockout White: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

* MUST comply with MUTCD section Table 2A-3 – Minimum maintained retroreflectivity levels. Approved process: Durst RHO 161 TS printer. Sherine Industries: (604) 513-1887.

NOTE: All 3M products are to be processed and applied according to 3M specifications. The seaming of material is NOT preferred. If the height of a sign panel is greater then 48 inches, the 3M 3930 material should be oriented vertically with stripes at 0 degrees, to avoid the seaming of material. If seaming is required, it should occur at the rule line or between messages.

Standard for System (typ.)

V VINYL NAME SPECIFICATION APPLICABLE PROCESS

V1 Surface applied according to 3M manufacturers specifications.

Dark Navy 3M Scotchcal ElectroCut Opaque Vinyl Film To match CMYK: C:91 , M:74, Y:53, K:60

Standard for System (typ.)V2 High resolution printed on White 3M Scotchcal Opaque Vinyl with 3M approved Clear UV/Graffiti overlaminate. Surface applied according to 3M manufacturers specifications.

3M High Intensity Prismatic Reflective Sheeting 3930 To match CMYK: C:63 , M:62, Y:71, K:66

3M High Intensity Prismatic Reflective Sheeting 3930 Color Match CMYK: C:22 , M:93, Y:100, K:13

3M High Intensity Prismatic Reflective Sheeting 3930 Color Match CMYK: C:86 , M:49, Y:40, K:14

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Standard for System (typ.)

Standard for System (typ.)R5

Light Blue 3M Scotchcal ElectroCut Opaque Vinyl Film To match CMYK: C:18 , M:0, Y:7, K:0

Standard for System (typ.)V3 High resolution printed on White 3M Scotchcal Opaque Vinyl with 3M approved Clear UV/Graffiti overlaminate. Surface applied according to 3M manufacturers specifications.

White

Moss

Earth

Dark Navy

Burnt Umber

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

3M High Intensity Prismatic Reflective Sheeting 3930 Color Match: Pantone® 469

Standard for System (typ.)R6 MUTCD Brown

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Standard for System (typ.)R7 Teal

3M High Intensity Prismatic Reflective Sheeting 3930 Color Match CMYK: C:18 , M:0, Y:7, K:0

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Standard for System (typ.)R8 Light Blue

P PAINTS NAME SPECIFICATION APPLICABLE PROCESS

3M High Intensity Prismatic Reflective Sheeting 3930 To match CMYK: C:91 , M:74, Y:53, K:60

3M High Intensity Prismatic Reflective Sheeting 3930 To match CMYK: C:52 , M:32, Y:51, K:5

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Standard for System (typ.)

3M High Intensity Prismatic Reflective Sheeting 3930 To match CMYK: C:63 , M:62, Y:71, K:66

3M High Intensity Prismatic Reflective Sheeting 3930 Color Match CMYK: C:22 , M:93, Y:100, K:13

3M High Intensity Prismatic Reflective Sheeting 3930 Color Match CMYK: C:86 , M:49, Y:40, K:14

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Standard for System (typ.)

Standard for System (typ.)P4

P2 Moss

Earth

Dark Navy

Burnt Umber

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

3M High Intensity Prismatic Reflective Sheeting 3930 Color Match: Pantone® 469

Standard for System (typ.)P5 MUTCD Brown

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Standard for System (typ.)P6 Teal

3M High Intensity Prismatic Reflective Sheeting 3930 Color Match CMYK: C:18 , M:0, Y:7, K:0

Custom Color: Background and Characters 3M custom inks direct to 3930 with 3M approved Clear UV/Graffiti overlaminate. *Applied according to Manufacturers Spec to aluminum sheet.

Standard for System (typ.)P7 Light Blue

Douglas Fir (Southern), No.2 Grade

M MATERIALS NAME SPECIFICATION PROCESS

M2 Irregular Cultured Stone, Color: Dressed Fieldstone Attach stone to interior steel frames w/ motor. Fill joints with grout and smooth. *Applied according to Manufacturing specs of stone, motor, and grout.

Apply wood preservative and bituminous wrap to the section of the post that will be below grade. Seal the top of post with an end-grain preservative. *Applied according to Manufacturing Spec of preservative

Stone

Wood

Placement GuidelinesB

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

NOTES

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

B.1

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication.

Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.

4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

FIGURE 6 - Lateral Clearance Guidelines

Within some of the Downtown areas of the Wayfinding Project, urban conditions and narrow sidewalks may cause deviation from the standards articulated in the previous figures. Conditions may include less lateral clearance for the 2'-0" or 5'-0" preferred distance from edge of sign panel to curb, or placement at 2'-0" or 5'-0" would create an obstacle (i.e. post positioned in middle of the side walk) or create situations of non-compliance to ADA clearances.

In these cases guidelines must be consistent with MUTCD Section 2A.19 options for urban areas.

Suggested recommendations for relocation of signs if placement is in conflict with guidelines.

OPTION A: Position the sign at a minimum of 2'-0" or 5'-0" (face of curb to edge of sign panel) as required.

OPTION B: If the sign can be moved, without disrupting routing or sequencing, then it should be repositioned to achieve the 2'-0" or 5'-0" min.

If 2'-0" is not physically possible, then the following options should be allowed:

OPTION C: The sign set back should be position at 1'-6". If that is not possible then...

OPTION D: Utilize a minimum 1'- 0", in accordance with MUTCD, only as a final option.

Sign Placement Guidelines a c b d e f g h

Figure 6 Not to Scale

MEASURE PREFFERED DISTANCE MINIMUM DISTANCESIGN TYPE

a Distance from Edge of Sign Panel to Edge of Curb

2'-0" or more 1' - 0" b c

Distance from Sign Post to Nearest Obstruction

4' - 0" or more 3' - 0"

Distance from Edge of Sign Panel to Nearest Overhead Obstruction

4' - 0" or more 1' - 0" d Sign Placement in Relation to Adjacent Building align to building Edge Do Not obstruct Entrance e Distance from Face of Sign to Nearest Tree Branch

20' - 0" or more 15' - 0" f Distance from Face of Sign to Nearest Light Standard

15' - 0" or more 10' - 0" g Distance from Back of Sign to Nearest Tree Branch

6' - 0" or more 3' - 0" h Distance from Back of Sign to Nearest Light Standard

6' - 0" or more 3' - 0"

Measurements and Distances shown are guidelines only prevailing local and state codes shall supersede information presented.

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

NOTES

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

B.2

SPECIFICATIONS

REVISIONS

CLIENT / PROJECT

SHEET TITLE

DATE

SUBCONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

KRD3/22/2019

B.5

NOTES

VIRGINIA'S BLUE RIDGE

Wayfinding and Signage System

120 North Church Street Suite 208 West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

Example of Sidewalk & City Right of Way (Sidewalk widths vary)

5’-0” 9’-0”

Gutter Curb

A D

A required

3'-0" m inim um

2’-0” typ. to Curb (1’-0” Min.)

4’-0” Min. Lateral Clearance Obstruction / Building to Pole

Sign Panel Pole/Breakaway 5 Foot Furnishing Zone

Sidewalk Element:

Canopy, Bench, Tree-grate Stairs, Building Entrance, etc.

Reference View: Example - 5 foot Furnishing Zone / City Right of Way SCALE: Not To Scale

Note: Top View of VDIR.1-3 shown as example.

NOTE:

All locations shall be installed within the City ROW. If during the initial survey it is determined any part of the sign (pole or panel) extends outside of the City’s Right of Way vertical plane and into private property, the installer must notify the city prior to fabrication/installation.

Unless approved by the Client or its designated agent, all signs shall be installed to the right of the direction of traffic and where sufficient space is available.

(a) Signs shall be located to take advantage of natural terrain, to minimize impacts on scenic environment and to avoid visual conflicts with other signs, trees and lampposts within the city's right-of-way.

(b) Signs shall be located so as not to interfere with, obstruct or divert driver’s attention from any other Official Traffic Control Device. Other Official Traffic Control Devices placed at intersection approaches, subsequent to the placement of a Wayfinding Sign, shall have precedence as to location and may require the relocation of the Wayfinding Sign. In the locations where Official Traffic Control Devices are integrated into the Wayfinding Signage System, the Official Traffic Control Devices shall take precedence with regard to order, space and location, over other information.

(c) Wayfinding Signs shall be positioned in such a manner that does not restrict driver’s attention or view when making turns or driving through an intersection.

(d) There shall be a goal of one sign per block, although two are permissible, where necessary.

The following pages illustrate installation guidelines for the location and spacing of the various sign types and the lateral clearance guidelines.

Sign Placement Guidelines

FIGURE 7 - Lateral Clearance Guidelines

Within some of the areas of Virginia's Blue Ridge Wayfinding Program, urban conditions and narrow sidewalks may cause deviation from the standards articulated in the previous figures. Conditions may include less lateral clearance for the 2'-0" or 5'-0" preferred distance from edge of sign panel to curb, or placement at 2'-0" or 5'-0" would create an obstacle (i.e. post positioned in middle of the side walk) or create situations of non-compliance to ADA clearances.

In these cases guidelines must be consistent with MUTCD Section 2A.19 options for urban areas.

Suggested recommendations for relocation of signs if placement is in conflict with guidelines.

OPTION A: Position the sign at a minimum of 2'-0" or 5'-0" (face of curb to edge of sign panel) as required.

OPTION B: If the sign can be moved, without disrupting routing or sequencing, then it should be repositioned to achieve the 2'-0" or 5'-0" min.

If 2'-0" is not physically possible, then the following options should be allowed:

OPTION C: The sign set back should be position at 1'-6". If that is not possible then...

OPTION D: Utilize a minimum 1'- 0", in accordance with MUTCD, only as a final option.

Figure 7

Not to Scale Sign Placement Guidelines

FIGURE 7 - Lateral Clearance Guidelines

Within some of the Downtown areas, urban conditions and narrow sidewalks may cause deviation from the standards articulated in the previous figures.

Conditions may include less lateral clearance for the 2'-0" or 5'-0" preferred distance from edge of sign panel to curb, or placement at 2'-0" or 5'-0" would create an obstacle (i.e. post positioned in middle of the side walk) or create situations of non-compliance to ADA clearances.

Example of Sidewalk & County Right of Way (Sidewalk widths vary)

5’-0” 9’-0”

Gutter Curb

A D

A required

3'-0" m inim um

2’-0” typ. to Curb (1’-0” Min.) Sign Panel

Pole/Breakaway

5 Foot Furnishing Zone

Sidewalk Element:

Canopy, Bench, Tree-grate Stairs, Building Entrance, etc.

Reference View: Example - 5 foot Furnishing Zone / County Right of Way SCALE: Not To Scale

Note: Top View of VDIR.1-3 shown as example.

NOTE:

All locations shall be installed within the ROW. If during the initial survey it is determined any part of the sign (pole or panel) extends outside of the Right of Way vertical plane and into private property, the installer must notify the county prior to fabrication/installation.

Figure 7 Not to Scale

Menu of Sign TypesC

CLIENT / PROJECT

SHEET TITLE

DATE

PROJECT NO.

DRAWN BY:

SHEET NO.

These drawings are meant for DESIGN INTENT ONLY and are not for construction.

Contractor shall verify and be responsible for all dimensions and conditions of the job. Contractor shall be familiar with the site and conditions it presents. This office must be notified of any variations from the dimensions and conditions shown on this drawing. Shop drawings and details must be submitted to this office for approval prior to proceeding with fabrication.

All copy shall be proofread by client and legal requirements checked by legal department.

07/10/24

C.1

SPECIFICATIONS

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

NOTES:

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.

4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the State of the project.

Vehicular & Pedestrian Signs

KIOSK.1

Pedestrian Kiosk

KIOSK.2

Pedestrian Kiosk

DIRECT.1

Business Directory

INFORMATION

Business Name

DOWNTOWN

VDIR.3

Vehicular Directional

Back View RES.1.2 Vehicular Directional

Residential Area (Existing Pole)

PARK.ID.1

Parking Lot ID Post & Panel

PARK.1.1

Parking Trailblazer

(New Pole)

PARK.1.2

Parking Trailblazer

(Mount to existing pole)

Destination Name

Ice Rink and Racquet Park

Public Parking

Breakaway pole

W. 3RD & N

JEFFERSON LOT

N O PA R K I N G O N

S U N D AY S

Design Intent DrawingsD S

V8 9

Specification Note

Color Designator

The Color Designator Chart is found in the Graphic Standards section.

The Specification Notation is found on the same page as the drawings.

KEY:

Signage DrawingsSECTION 2

SPECIFICATIONS SIGN TYPE: FUNCTION:

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

D.1

NOTES

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication.

Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.

4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

VDIR.3

Vehicular Directional

Vehicular DirectionalVDIR.3

Front View: VDIR.3

SCALE: 1/2”=1’1

Top View: VDIR.3

SCALE: 1/2”=1’4

Side View: VDIR.3 SCALE: 1/2”=1’2 Back View: VDIR.3

SCALE: 1/2”=1’3

Destination Name

F.2 Breakaway pole

R1 2

P3 3

R2 2

P6 6

P3 5

P6 6

V3 6

NOTE**

Legend copy 4” or 5” cap height

Refer to Section E Graphic Layouts for full layout dimensions

6' -5

7' -6

3'-4"

6' -4

1'-4"

5' -4

3 / 4"

4 1/2"3"

1 / 4"

6' -1

1 /

'-5

1 / 4"

4 3/4" 7"

1' -3

1 / 2"

5' -3

1 / 2"

1. 6x6 WOOD POST (5 1/2" x 5 1/2") MATERIAL: Douglas Fir (Southern), No.2

Grade EDGES: Smooth FOOTER: Breakaway Holes drilled per CDOT requirements.

2. SIGN PANEL

MATERIAL: 1/4" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted

GRAPHIC BACKGROUND AND COPY

PROCESS: 3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate.(See Color Sheet for all color and material specifications)

EDGE & BACK DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Press-roll per 3M requirements. Seam weld panel to U-Channel.

3. POLE CAP

MATERIAL: Aluminum FABRICATION PROCESS: Extruded COLOR: Custom, as noted SURFACE PROCESS: Paint all exposed surfaces with Matthews Acrylic Polyurethane, with clear coat satin finish. FASTENER: Mechanically fasten to sign pole

5. DECORATIVE COLLAR

MATERIAL: 1/4 " thick Aluminum FABRICATION PROCESS: Fabricated COLOR: Custom, as noted SURFACE PROCESS: Paint all exposed surfaces with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Mechanically fasten to sign panel through face with hex bolts.

6. ACCENT PANEL

MATERIAL: 0.80 Aluminum FABRICATION PROCESS: Router Cut painted panel with vinyl graphic applied COLOR: Custom, as noted SURFACE PROCESS: Paint all exposed surfaces UV clear coat applied over painted paneland vinyl graphics.

FASTENER: Mechanically fasten to sign panel through face with hex bolts.

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

D.2

NOTES

Nederland,CO Wayfinding Program

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication.

Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.

4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

RES.1.2

Residential Directional

Residential DirectionalRES.1.2

2. SIGN PANEL

MATERIAL: 1/4" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted

GRAPHIC BACKGROUND AND COPY

PROCESS: 3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate.(See Color Sheet for all color and material specifications)

EDGE & BACK DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Press-roll per 3M requirements. Seam weld panel to U-Channel.

7. SUPPORT CHANNEL EXTRUSION

MATERIAL :Aluminum

FABRICATION PROCESS: Extruded SURFACE PROCESS: Paint all exposed surfaces FASTENER: Rivet to Sign Panel FINISH: Standard PRODUCT: SignFix-SX0090 Large Corner

Angle Extrusion Post w/ welded gussets as reqd.

8. SUPPORT CHANNEL EXTRUSION

MATERIAL: Type 201 SS

SIZE: 3/4 inch FINISH: Stainless steel Finish is to match color of existing pole.

FASTENER: Ultra-Lok® Free End clamps

Existing Pole

Front View: RES.1.2 SCALE: 1/2”=1’1 Side View: RES.1.2

SCALE: 1/2”=1’2 Back View: RES.1.2

SCALE: 1/2”=1’3

Plan View: RES.1.2

SCALE: 1/2”=1’4

Ice Rink and Raquet Park

1 1/2" P3 7

R6 2

NOTE**

Refer to Section E Graphic Layouts for full layout dimensions

Existing wood post (Measure in field)

R6 2

R1 23' -0

-6

2'-7"

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

D.3

NOTES

Nederland,CO Wayfinding Program

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication.

Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.

4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

PARK.ID.1

Parking Lot ID

Parking Lot IDPARK.ID.1

1. 6x6 WOOD POST (5 1/2" x 5 1/2") MATERIAL: Douglas Fir (Southern), No.2

Grade EDGES: Smooth FOOTER: Direct Bury with Aluminum

Sleeve FASTENER: Sleeve mechanically fasten to through wood with hex bolts.

2. SIGN PANEL

MATERIAL: 1/4" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted

GRAPHIC BACKGROUND AND COPY

PROCESS: 3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate.(See Color Sheet for all color and material specifications)

EDGE & BACK DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Press-roll per 3M requirements. Seam weld panel to U-Channel.

3. POLE CAP

4. SLEEVE / BRACKET

MATERIAL: Aluminum U-channel (1/4" wall) FABRICATION PROCESS: Fabricated EDGES: Square, Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Mechanically fastened to post with hex bolts.

9. PROTECTIVE COLLAR

MATERIAL: 1/4" Aluminum protective collar FABRICATION PROCESS: Fabricated EDGES: Square, Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Collars secure to posts with through-bolts and nuts as required painted to match.

Front View: PARK.ID.1

SCALE: 1/2”=1’1

Top View: PARK.ID.1

SCALE: 1/2”=1’4

Side View: PARK.ID.1 SCALE: 1/2”=1’2 Back View: PARK.ID.1

SCALE: 1/2”=1’3

W. 3RD & N

JEFFERSON LOT

N O PA R K I N G O N

S U N D AY S

W. 3RD & N

JEFFERSON LOT

N O PA R K I N G O N

S U N D AY S

P4 2

P3 4

P3 3 V1 2

P1 2

V1 2

V1 2 P6 2

M1 1

P3 9

3'-5" Ø 1'-2 3/4"

2'-7"

3 /

3' -0

-6

4' -4

-9 3 /

8' -2

3" 3"

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

NOTES

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

SIGN TYPE: FUNCTION:

D.4

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication.

Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.

4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

1. 6x6 WOOD POST (5 1/2" x 5 1/2") MATERIAL: Douglas Fir (Southern), No.2

Grade EDGES: Smooth FOOTER: Direct Bury

2. SIGN PANEL

MATERIAL: 1/4" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted

GRAPHIC BACKGROUND AND COPY

PROCESS: 3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate.(See Color Sheet for all color and material specifications)

EDGE & BACK DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Press-roll per 3M requirements. Seam weld panel to U-Channel.

3. POLE CAP

4. SLEEVE / BRACKET

FASTENER: Mechanically fastened to post with hex bolts.

5. DECORATIVE COLLAR

MATERIAL: 1/4 " thick Aluminum FABRICATION PROCESS: Fabricated COLOR: Custom, as noted SURFACE PROCESS: Paint all exposed surfaces with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Mechanically fasten to sign panel through face with hex bolts.

PARK.1.1

Parking Trailblazer

PARK.1.1 Parking Trailblazer

Front View: PARK.1.1

SCALE: 1/2”=1’1

Top View: PARK.1.1

SCALE: 1/2”=1’4

Side View: PARK.1.1

SCALE: 1/2”=1’2

Public Parking

Back View: PARK.1.1

SCALE: 1/2”=1’3

P3 3

R2 2

R5 2

R1 2

R7 2

M1 1

P3 4

P3 5

NOTE**

Refer to Section E Graphic Layouts for full layout dimensions

2'-0"

Breakaway pole

F.2

3" 3 1/4"

6 1/2"

3' -4

7' -6

1 /

'-4

1 / 4"

2' -1

1' -8

-1 1"

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

NOTES

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

SIGN TYPE: FUNCTION:

D.5

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication.

Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.

4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

2. SIGN PANEL

MATERIAL: 1/4" thick Aluminum sheet FABRICATION PROCESS: Router Cut EDGES: Smooth COLOR: custom, as noted

GRAPHIC BACKGROUND AND COPY

PROCESS: 3M custom inks print direct to 3930 with 3M approved UV/Graffiti Vinyl Over-laminate.(See Color Sheet for all color and material specifications)

EDGE & BACK DETAIL: Paint all edges and back with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Press-roll per 3M requirements. Seam weld panel to U-Channel.

7. SUPPORT CHANNEL EXTRUSION

MATERIAL :Aluminum

FABRICATION PROCESS: Extruded SURFACE PROCESS: Paint all exposed surfaces FASTENER: Rivet to Sign Panel FINISH: Standard PRODUCT: SignFix-SX0090 Large Corner

Angle Extrusion Post w/ welded gussets as reqd.

8. SUPPORT CHANNEL EXTRUSION

MATERIAL: Type 201 SS

SIZE: 3/4 inch FINISH: Stainless steel Finish is to match color of existing pole.

FASTENER: Ultra-Lok® Free End clamps

PARK.1.2

Parking Trailblazer

(Mounted to Existing Pole)

PARK.1.2 Parking Trailblazer

Front View: PARK.1.2 SCALE: 1/2”=1’1 Side View: PARK.1.2

SCALE: 1/2”=1’2 Back View: PARK.1.2

SCALE: 1/2”=1’3

Public Parking

R2 2

R5 2

R1 2

R7 2

Plan View: PARK.1.2

SCALE: 1/2”=1’4

1 1/2" P3 7

R1 2

Existing Pole

NOTE**

Existing pole Measure in field

2'-0"

3' -4

-6

CLIENT / PROJECT

SHEET TITLE

DATE

SUB CONSULTANT

PROJECT NO.

DRAWN BY:

SHEET NO.

MP07/10/24

NOTES

Nederland,CO Wayfinding Program

5 W. Gay Street West Chester, PA 19380 T 484.266.0648 www.merjedesign.com

E N V I R O N M E N T S & E X P E R I E N C E S

SIGN TYPE: FUNCTION:

D.6

1. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication.

Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

2. All vinyl and painted surfaces must receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

3. Hardware: All exposed hardware shall be tamper proof fasteners.

4. Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the

State of the project.

1. 7x7 WOOD POST (6 1/2" x 6 1/2") MATERIAL: Douglas Fir (Southern), No.2

Grade EDGES: Smooth FOOTER: Breakaway Holes drilled per CDOT requirements.

2. SIGN PANEL - DYE SUBLIMATED

MATERIAL: 1/2” Aluminum Panel EDGES: Rounded Smooth GRAPHICS: Zero VOC Powdercoat

Primer w/ Water Based Custom Dye Sublimated Ink Transfer Print on Face.

Clear UV-Resistant, Anti-Graffiti Powdercoat Topcoat, Matte/Satin Finish (Per Manufacturer Capabilities)

FASTENER: Mechanically fasten to Painted base sign panel

3. POLE CAP

4. BRACKET

MATERIAL: Aluminum FABRICATION PROCESS: Fabricated EDGES: Square, Smooth COLOR: custom, as noted SURFACE PROCESS: Paint all exposed surfaces with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Mechanically fastened to post with hex bolts.

5. DECORATIVE COLLAR

MATERIAL: 1/4 " thick Aluminum FABRICATION PROCESS: Fabricated COLOR: Custom, as noted SURFACE PROCESS: Paint all exposed surfaces with Matthews Acrylic Polyurethane, with clear coat satin finish.

FASTENER: Mechanically fasten to sign panel through face with hex bolts.

10. ALUMINUM ROOF

PRODUCT: WESTERN RIB®/7.2 PANEL

20 OZ Roofing panel www.westernstatesmetalroofing.

com COLOR: Silver metallic

FASTENER: Mechanically fasten to Kiosk Structure.

11. STONE BASE

MATERIAL: Irregular Cultured Stone FABRICATION PROCESS: Attach stone to interior steel frames w/ motor COLOR: Dressed Fieldstone SURFACE PROCESS: Fill joints with grout and smooth.

KIOSK.1

Pedestrain Information

KIOSK.1 Pedestrian Information

Front View: KIOSK.1

SCALE: 1/2”=1’1

Top View: KIOSK.1

SCALE: 1/2”=1’4

Side View: KIOSK.1 SCALE: 1/2”=1’2 Back View: KIOSK.1

SCALE: 1/2”=1’3

INFORMATION

P4 2 V1 2

P1 2

P2 2

V3 2 P3 4

P3 4

M2 11

V1 2

IN…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Apr 25, 2025.