Specifications.docx

DOCX document 16 KB Posted

Attached to
MAC for Machine Shop Tools & Equipment Federal contract opportunity
Solicitation number
N6893617R0022
Issued by
Department of the Navy Naval Air Systems Command Naval Air Warfare Center

About this file

From the source

Specifications

View the file

Other files for this federal contract opportunity

Other files attached to MAC for Machine Shop Tools & Equipment, newest first.
File Type Posted
Past_Performance_Questionaire.pdf PDF
17-R-0022_RFP.docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Vertical Mill, 9 x 49 Table with Power Feed Specification

Spindle Speed Control: Variable Speed Pulley Table Length (Inch): 49 Table Width (Inch): 9 Phase: 3 Longitudinal Travel (Decimal Inch): 36.0000 Cross Travel (Decimal Inch): 12.0000 Knee Travel (Decimal Inch): 16.0000 Number of Spindle Speeds: Variable Maximum Spindle Speed (RPM): 4200.00 Minimum Spindle Speed (RPM): 60.00 Includes; Digital readout: Servo Table Feed Spindle Travel Length (Inch): 5 Spindle Taper Size: R8 Quill Diameter (Decimal Inch): 3.3750 Spindle Power Feed Rate Per Minute (in/rev): 0.0015; 0.0030; 0.0060 Minimum Spindle to Table Distance (Inch): 3 Maximum Spindle to Table Distance (Inch): 18-1/4 Table Load Capacity (Lb.): 750.00 Left-Hand Head Tilt: 90.00 Right-Hand Head Tilt: 90.00 Forward Head Tilt: 45.00 Backward Head Tilt: 45.00 Ram Travel Length (Decimal Inch): 12.0000 Horsepower (HP): 2.00 Voltage: 440

File details come from the government source that posted it. Updated .