Statement of Work.pdf

v4.3_MAY2025

STATEMENT OF WORK (SOW)

B-1320 First Floor Annex Lab Furniture

1.0 Background

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT), has a requirement for new laboratory furniture and installation.

1.1 Places of Performance

Naval Undersea Warfare Center, Division Newport, Newport, RI 02841.

1.2 Authorized Users

Code 1021 is the sole authorized user of this order.

1.3 Sponsors - NUWCDIVNPT

1.4 Types of Funding- NISE Funding

2.0 Scope

The contractor shall provide all the necessary materials, labor, and equipment to provide laboratory furniture in accordance with this statement of work and the drawings. The contractor shall be responsible for providing all components and attachment pieces for the complete assembly of the furniture. All accessory equipment shall be provided as shown on the layout.

The contractor is responsible for accurately providing the quantity of each component as indicated. This procurement is for the purchase, delivery and installation of the furniture. All material must be handled by the contractor, brought to the site, and installed. The installation is for B-1320 First Floor Annex. The area for installation is located on the first floor with ground level access and an overhead door leading into the area.

2.1 Program or Systems Supported – N/A

3.0 Applicable Documents

The contractor shall perform the tasking required in section 4.0 in accordance with the below Applicable Document:

NUMBER TITLE Revision/Date Applicable SOW Task

3.1 First Floor

Alterations, Building 1320 Annex

2024.04.23 All

4.0 Technical Requirements

The contractor shall provide the product, installation services, and cleanup of cardboard and debris from B-1320 Annex, First Floor NUWCDIVNPT as specified below and in accordance with Applicable Document 3.1.

All product shall be similar or equal to the Rousseau Brand Laboratory Furniture. The furniture shall consist of heavy duty work benches, work stations, standing work stations, lockers, cabinets, and rolling work bench drawers as indicated below and in the drawing.

The color of final product shall be from the manufacturer’s standard color selection and the color will be selected by the Government.

Part Name

Description Measurements Quantity Needed

W1 Typical Workstation

– Stationary Bench with ride hand side drawers

60” w x 30” D x 29-3/4”H 5

SW1 Standing Work Station – Bench on 4” swivel casters with 2 – 12” lower shelves

60” w x 30” D x 29-3/4”H 6

W2 Work Station with Upper Shelf -stationary

60” w x 30” D x 29-3/4”H lower bench with upper shelf attached

W3 Fume Hood work station

60” w x 30” D x 29-3/4”H Bench with two shelves

SW2 Standing Work Station without shelf

60”w x 30”D x 34-3/4H – on 4” swivel casters

SC Storage Cabinet 36”W x 18” D x 78” H – Two door 3 CSC Corrosive Safety

Cabinet 35” w x 22” D 1

RTC Rolling Tool Chest 60” W x 34-3/4” H 3 FSC Flammables Safety

Cabinet 47” w x 24-1/4” D x 77” H 1

MSC Mobile Storage Cabinet – on casters

48” w x 24” D x 84” H on 4” swivel casters

5.0 Contract Status Report

RESERVED

6.0 Government Furnished Information

None

7.0 Government Furnished Property: N/A

8.0 Quality Surveillance and Performance Standards; N/A

9.0 Information and Communication Technology (ICT) Accessibility Requirements: N/A

10.0 Security Compliance

10.1 Program Protection

SECURITY: All Contractor personnel shall adhere to the Security provisions of 32 CFR Part 117

– National Industrial Security Program Operating Manual (NISPOM) and the security requirements of the attached DD254. While performing work at a Government Facility, Contractor personnel shall comply with the security regulations of the host facility. Applicable FAR, DFARS, NMCARS clauses, and NAVSEA text shall be adhered to in the performance of this contract. Security incidents shall be promptly reported through the companies Facility Security Officer (FSO), to the Contracting Officer’s Representative (COR), Technical Point of Contact (TPOC), and the Cognizant Security Office to NUWCDIVNPT Security.

10.2 Operations Security (OPSEC)

OPSEC is a process that identifies critical information to determine if friendly actions can be observed by adversary intelligence systems, determines if information obtained by adversaries could be interpreted to be useful to them, and then executes selected measures that eliminate or reduce adversary exploitation of friendly critical information.

The Contractor shall develop and implement, and update and maintain an OPSEC program to protect controlled unclassified and classified activities, information, equipment, and material used or developed by the Contractor and any subcontractor during performance of the contract.

The Contractor shall be responsible for the subcontractor implementation of the OPSEC requirements. The Contractor developed OPSEC program may include Information Assurance and Communications Security (COMSEC). The OPSEC program shall be in accordance with National Security Presidential Memorandum (NSPM) 28, and at a minimum shall include:

1) Assignment of responsibility for OPSEC direction and implementation.

2) Issuance of procedures and planning guidance for the use of OPSEC techniques to identify vulnerabilities and apply applicable countermeasures.

3) Establishment of OPSEC education and awareness training.

4) Provisions for management, annual review, and evaluation of OPSEC programs.

5) Flow down of OPSEC requirements to subcontractors when applicable.

While performing aboard Government sites, the contractor shall: comply with all OPSEC instructions and policies; include OPSEC as part of its ongoing security awareness program and take all required Agency training; Be responsive to the Supporting OPSEC Manager on a non-interference basis; and Protect sensitive unclassified information and activities, which could compromise classified information or operations, or degrade the planning and execution of operations performed by the Requiring Organization and contractor in support of the mission.

10.3 Electronic Spillage

Electronic Spillage (ES) is defined as a situation where information of higher classification than a system is authorized to process is introduced into that system, intentionally or otherwise. If a Contractor is determined to be responsible for an ES, all direct and indirect costs incurred by the Government for ES remediation will be charged to the Contractor.