Attachment 1 - SOW.pdf

v3.1_MARCH2023

STATEMENT OF WORK (SOW)

Hydrostatic Pressure Tanks

1.0 Background

The Naval Undersea Warfare Center Division, Newport (NUWDIVNPT) Code 70 designs, prototypes, tests, and provides life cycle support for submarine non-propulsion electronic systems; pressure/implosion qualification testing is integral to NUWDIVNPT’s mission. Pressure vessels perform Test and Evaluation for shipboard systems relative to external volume requirements and hydrostatic pressure requirements. Hydrostatic pressure vessels are required to sustain NUWDIVNPT’s mission and technical capabilities. These hydrostatic pressure vessels will replace older units and will have elevated pressure ratings to meet the external volume requirement imposed by the Columbia Program.

1.1 Places of Performance

Contractor’s Facility: Hydrostatic Pressure Tank fabrication NUWCDIVNPT: Installation

1.2 Authorized Users

NUWCDIVNPT, Code 70

1.3 Sponsors

Naval Sea Systems Command (NAVSEA) Program Executive Office COLUMBIA Program Executive Office Submarines Office of Naval Research (ONR) Defense Advanced Research Projects Agency (DARPA) Pacific Fleet (PACFLEET) Atlantic Fleet (LANTFLEET) Naval Information Warfare Systems Command (NAVWARSYSCOM)

1.4 Types of Funding

Capital Investment Project (CIP) Research, Development, Test and Evaluation (RDT&E) Ship and Conversion Navy (SCN)

2.0 Scope

The contractor shall provide the material and services to design, document, manufacture, test, package, and deliver a Technical Data Package (TDP) and hydrostatic pressure vessels.

3.0 Applicable Documents

The contractor shall perform the tasking required in Section 4.0 in accordance with (IAW) the below Applicable Documents (ADs).

NUMBER TITLE REVISION/

DATE

APPLICABLE

SOW TASK

3.1 DoD Issuances

3.1.1 MIL-STD-810H: DOD Test Method Standard 18 May 2022 4.1, 4.2

3.1.2 MIL-PRF-28800G: Test Equipment for Use with

Electrical and Electronic Equipment, General Specification for

17 November

4.1, 4.2

3.2 Navy Issuances

3.2.1 NUWCDIVNPTINST 4000.1 Receipt, Delivery, Inspection, and Shipment of Material 4.4

3.2.2 UFC 4-390-01: Unified Facilities Criteria (UFC)

Operation and Maintenance: unmanned Pressure Test Facilities Safety Certification Manual

23 July 2003 4.1, 4.2, 4.3, 4.4

3.2.3 TM-CHENG/05-010-SCA Revision C: NAVFAC

System Certification Authority (SCA) Policy for Inspection and Testing Shore-Based Hyperbaric Gas Storage Vessels and Associated Relief Valves

07 January

4.1, 4.2, 4.3, 4.4

3.2.4 OPNAVINST 11230.2C Inspection, Certification

and Audit of Navy Specialized Infrastructure

05 May 2021 4.1, 4.2, 4.3, 4.4

3.2.5 Survivability Laboratory Performance

Specifications: Hydrostatic Pressure Tanks Minimum Requirements for: 10,000 PSI Vertical Hydrostatic Pressure Vessel Design Requirements

28 November

All

3.2.6 Survivability Laboratory Performance

Specifications: Hydrostatic Pressure Tanks Minimum Requirements for: 6000 psi Vertical Hydrostatic Pressure Vessel Design Requirements

28 November

All

3.2.7 Unmanned Hyperbaric Certification Program Brief-

General

December

All

4.0 Technical Requirements

The Contractor shall perform the following tasks and subtasks IAW ADs in Section 3.0.

4.1 Task A: Technical Data Package

The contractor shall create and deliver conceptual design drawings using specifications provided in ADs. The contractor design drawings shall include the location of Item Unique Identification (IUID) ident-a-plates.

The contractor shall submit draft drawings to the Government for review and approval. The Government estimates two review cycles including review by Naval Facilities Engineering Command (NAVFAC) Hyperbaric System Certification Authority (SCA) will be required prior to Government approval.

Deliverables:

• Commercial Off-The-Shelf (COTS) Manuals and Associated Supplemental Data IAW CDRL A001

• Technical Data Package IAW CDRL A003

4.2 Task B: Procurement, Production, and Test

The contractor shall provide material and services to manufacture, assemble and test the hydrostatic pressure vessels.

4.2.1 The contractor shall deliver a Factory Acceptance Test (FAT) Procedure. The procedure shall include all steps necessary for full verification of the specifications per ADs. The contractor shall conduct the FAT at NUWCDIVNPT. The contractor shall perform design verification, qualification, and pressurization testing. Test will be observed by a Government point of contact (POC) to verify specifications are met. Contractor shall coordinate FAT schedule with the Government.

The contractor shall provide a field engineer to oversee the installation and final inspection and acceptance tests at NUWCDIVNPT, Newport RI.

Deliverables:

• Test Procedures IAW CDRL A002

• Test Report IAW CDRL A004

• Production Report IAW CDRL A005

4.3 Task D: Installation and Integration

The contractor shall prepare and deliver a site preparation and installation plan for Government review and approval.

The contractor shall deliver, install and integrate the hydrostatic pressure vessel(s) into the building parameter IAW the performance specification.

Deliverables:

• Site Preparation and Installation Plan IAW CDRL A006

• Certificate of Compliance IAW CDRL A007

4.4 Task E: Technical Manual and Training

The contractor shall prepare and deliver a Hydrostatic Pressure Vessel Technical Manual to include Operation and Maintenance and User Training. The manual shall provide a detailed description of the hydrostatic pressure vessel, user guidance for operation, maintenance, and troubleshooting of the system.

Deliverable:

• Hydrostatic Pressure Vessel Operation and Maintenance Manual IAW CDRL A008

5.0 Progress Reports

The Contractor shall prepare a Contractor’s Status Report that indicates the progress of work, status of the program(s), and existing or potential problem areas. The contractor shall submit the Contract Status Report for the same timeframe as each invoice submitted in the Invoicing, Receipt, Acceptance, and Property Transfer (iRAPT) module of Wide Area Work Flow (WAWF).

Deliverable:

• Progress Reports IAW CDRL A009