RIR_QAP_W03844_R1.pdf

TAHEF-Form-No. 008 Rev A

04-14-2021

TAHE FACILITY

NETC, BLDG. 6

NEWPORT, RI 02841

TAHE FACILITY QUALITY PROVISIONS

RECEIPT INSPECTION REPORT

PART NUMBER / DRAWING NUMBER

7443747 Rev

PART NOMENCLATURE

276 CDU / B-30 MOTORS

SOURCE:

S/N:

CONTRACT:

N66604-

PURCHASE ORDER: PURCHASE REQUEST: WORK ORDER:

W03844

OUTSIDE SERVICES SOW:

N/A

SALES ORDER:

N/A

QTY RECEIVED SAMPLE SIZE** UNIT ORDER IS FOR:

OK-276 CDU

ORDER IS FOR INVENTORY

PURCHASE NON-TACTICAL OUTSIDE SERVICE

OEM

CHARACTERISTIC MEASURED / VERIFIED

FINDINGS

ACCEPT REJECT DISPOSITION - REMARKS

THE FOLLOWING QUALITY

DOCUMENTATION/INFORMATION/INSTRUCTIONS

MUST BE PROVIDED/ADHERED TO:

P/N: 7443747; QTY: 10

Certificate of Compliance: that items were manufactured in accordance with all applicable instructions and specifications.

Required

(A001)

Mercury Free Statement: mercury or mercury compounds shall not be intentionally added or come in direct contact with hardware or supplies furnished under this contract.

Required

(A002)

Domestically Sourced Material: all raw material must be sourced domestically or from a qualified country per DFARS Part 225:

Foreign Acquisition.

Not Required

Product Identification must be in accordance with attached drawings/documentation. If not specified, then identification must appear on external surfaces of items or packages. (Military

Specifications will be provided upon request)

Required (OEM Motor Model Number

Identification):

HMB030/P/21/PL566

Inspection is required by the vendor Required - Document all measured part dimensions and compare to required dimensions per drawing.

Test data to be provided Required – OEM ATP data/reports for each serialized motor

(A003)

Special packaging requirements Required – Package to protect part features during shipping and handling.

TAHEF Incoming Inspection: Quality Notes. Required- TAHEF PERSONEL

See Inspection Report Page 3

TAHEF Personnel Action Only – Verify documented on RIR:

TAHEF B30 DATA SHEET.

Motor has been flushed and run in with

2190 TEP and ¼” plug torque.

Verify running torque readings.

Kawasaki B30 Free Rotating Torque is

6 - 14 FT-LB.

TAHEF Personnel Action Only Stamp P/N 8-52-405 on Motor IAW

Dwg 8-52-405 Rev, C

Replace shipping plugs IAW Dwg 8-52-

405 Rev. C, NOTE 3

SPECIAL INSTRUCTIONS/REMARKS/ENCLOSURES

7443747_53711_FN_B

RIR_QAP_W03844_R1, VIR_W03844

**SAMPLING PERFORMED IN ACCORDANCE WITH ANSI/ASQ Z1.4 GENERAL INSPECTION LEVEL II

TOTAL ACCEPTED

TOTAL REJECTED

INSPECTOR

DATE

TAHE FACILITY

NETC, BLDG. 6

NEWPORT, RI 02841

RECEIPT INSPECTION REPORT: TAHEF B30 DATA SHEET

PART NUMBER

HMB030/P/21/PL566 (Kawasaki P/N)

7443747 (TAHEF P/N)

REV

PART NOMENCLATURE

MOTOR, HYDRAULIC, (B-30) CABLE DRIVE UNIT

ASSY

SOURCE:

S/N: Various see below

CONTRACT:

N66604-

PURCHASE ORDER:

PURCHASE REQUEST: WORK ORDER:

W03844

B-30 Motor S/N Unit Flushed Yes / No

(TEP 2190) 1/4” plug torque to 26-29 ft. lbs.

Rolling Torque In lb-ft

(6-14 ft-lbs)

Technician Stamp / Date

TOTAL ACCEPTED

TOTAL REJECTED

INSPECTOR

DATE