19-021A_BLDG_1351_ROOM_115_ADDED_COOLING_DRAWINGS.pdf

PDF 1 MB Posted Oct 18, 2019

Attached to: Additional Cooling B-1351 NUWCDIVNPT
Solicitation number: N66604-20-Q-0171
Issued by: Department of the Navy Naval Sea Systems Command

About this file

From the source

Drawings

View the file

Other files

File	Type	Posted
RFQ_N66604-20-Q-0171.pdf	PDF	Oct 30, 2019
Attachment_1_-_FY19_Base_Access_Request_(1).pdf	PDF	Oct 18, 2019
N66604-20-Q-0171.pdf	PDF	Oct 18, 2019

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

NAVAL UNDERSEA WARFARE CENTER

NEWPORT, RI FACILITIES BRANCH

WORK REQ. NO.

O F

Y N

G C

O M

, R H

O D

H N

L U

N D

E R

S E

A W

A R

E C

E N

SHEET OF

CONTRACT NO.

NAVFAC DRAWING NO.

NUWC DRAWING NO.

SCALE:

SIZE: ANSI D

A P

P R

C H

E C

K E

D B

D E

N E

D B

D R

A W

N B

D A

S A

D A

SEAL

R E

S S

E S

C R

O N

D A

P P

AS NOTED

K . B

O U

E S

H E

E T

B U

O O

19-021A

K . B

O U

R . N

O N

T-1

A D

D E

D C

O O

AutoCAD SHX Text

BUILDING 1351 ROOM 115 ADDED COOLING

AutoCAD SHX Text

LIST OF DRAWINGS:

AutoCAD SHX Text

DWG. NO.

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

SHEET TITLE

AutoCAD SHX Text 19-021A 1 OF 9 T-1 TITLE SHEET 1 OF 9 T-1 TITLE SHEET T-1 TITLE SHEET TITLE SHEET 19-021A 2 OF 9 A-1 PARTIAL FLOOR PLAN - ARCHITECTURAL 2 OF 9 A-1 PARTIAL FLOOR PLAN - ARCHITECTURAL A-1 PARTIAL FLOOR PLAN - ARCHITECTURAL PARTIAL FLOOR PLAN - ARCHITECTURAL 19-021A 3 OF 9 M-1 PARTIAL FLOOR PLAN - HVAC DEMOLITION 3 OF 9 M-1 PARTIAL FLOOR PLAN - HVAC DEMOLITION M-1 PARTIAL FLOOR PLAN - HVAC DEMOLITION PARTIAL FLOOR PLAN - HVAC DEMOLITION 19-021A 4 OF 9 M-2 PARTIAL FLOOR PLAN - HVAC NEW WORK 4 OF 9 M-2 PARTIAL FLOOR PLAN - HVAC NEW WORK M-2 PARTIAL FLOOR PLAN - HVAC NEW WORK PARTIAL FLOOR PLAN - HVAC NEW WORK 19-021A 5 OF 9 M-3 LEGEND AND GENERAL NOTES - HVAC 5 OF 9 M-3 LEGEND AND GENERAL NOTES - HVAC M-3 LEGEND AND GENERAL NOTES - HVAC LEGEND AND GENERAL NOTES - HVAC 19-021A 6 OF 9 M-4 SCHEDULE AND DETAIL SHEET - HVAC 6 OF 9 M-4 SCHEDULE AND DETAIL SHEET - HVAC M-4 SCHEDULE AND DETAIL SHEET - HVAC SCHEDULE AND DETAIL SHEET - HVAC 19-021A 7 OF 9 E-1 PARTIAL FLOOR PLAN - ELECTRICAL DEMOLITION 7 OF 9 E-1 PARTIAL FLOOR PLAN - ELECTRICAL DEMOLITION E-1 PARTIAL FLOOR PLAN - ELECTRICAL DEMOLITION PARTIAL FLOOR PLAN - ELECTRICAL DEMOLITION 19-021A 8 OF 9 E-2 PARTIAL FLOOR PLAN - ELECTRICAL NEW WORK 8 OF 9 E-2 PARTIAL FLOOR PLAN - ELECTRICAL NEW WORK E-2 PARTIAL FLOOR PLAN - ELECTRICAL NEW WORK PARTIAL FLOOR PLAN - ELECTRICAL NEW WORK 19-021A 9 OF 9 E-3 LEGEND, NOTES AND SCHEDULE - ELECTRICAL 9 OF 9 E-3 LEGEND, NOTES AND SCHEDULE - ELECTRICAL E-3 LEGEND, NOTES AND SCHEDULE - ELECTRICAL LEGEND, NOTES AND SCHEDULE - ELECTRICAL

AutoCAD SHX Text

GATE 23

AutoCAD SHX Text

BADGING OFFICE BLDG. #80

AutoCAD SHX Text

TO ROUTE 114

AutoCAD SHX Text

NAVSTA GATE 17

AutoCAD SHX Text

AutoCAD SHX Text 75A

AutoCAD SHX Text

AutoCAD SHX Text 109A

AutoCAD SHX Text

AutoCAD SHX Text 1A

AutoCAD SHX Text

AutoCAD SHX Text 102T

AutoCAD SHX Text

ATF

AutoCAD SHX Text

GATE 25

AutoCAD SHX Text

AutoCAD SHX Text W2018-362-01

AutoCAD SHX Text

FACILITIES BLDG. # 679

AutoCAD SHX Text

LOCATION MAP

AutoCAD SHX Text N

AutoCAD SHX Text

BLDG. #1351

AutoCAD SHX Text

AREA OF WORK

AutoCAD SHX Text

BUILDING 1351 KEY PLAN

AutoCAD SHX Text

ROOM 115 AREA OF WORK

SPEC. NO.

O F

Y N

G C

O M

, R H

O D

H N

L U

N D

E R

S E

A W

A R

E C

E N

SHEET OF

CONTRACT NO.

NAVFAC DRAWING NO.

NUWC DRAWING NO.

SCALE:

SIZE: ANSI D

A P

P R

C H

E C

K E

D B

D E

N E

D B

D R

A W

N B

D A

S A

D A

SEAL

R E

S S

E S

C R

O N

D A

P P

AS NOTED

P A

A L

O R

A R

C H

R A

B U

O O

K . B

O U

R . N

O N

A D

D E

D C

O O

K . B

O U

A-1

19-021A

AutoCAD SHX Text

PARTIAL FLOOR PLAN - ARCHITECTURAL DEMOLITION

AutoCAD SHX Text

SCALE: 1/4" =1'-0"

AutoCAD SHX Text

1. EXISTING GWB CEILING IN ROOM 115 SHALL BE REMOVED FOR A EXISTING GWB CEILING IN ROOM 115 SHALL BE REMOVED FOR A COMPLETE NEW ACT INSTALLATION, ALL DEMOLITION MAY NOT BE SHOWN FOR CLARITY, FIELD VERIFY ALL ITEMS REQUIRED TO BE REMOVED. 2. AT AREAS WHERE ABOVE CEILING WORK IS TO TAKE PLACE, THE AT AREAS WHERE ABOVE CEILING WORK IS TO TAKE PLACE, THE CEILING TILES AND GRID SHALL BE REMOVED AND REINSTALLED ONCE THE NEW WORK IS COMPLETE. REPLACE DAMAGED GRID AND TILE

AutoCAD SHX Text

%%UDEMOLITION NOTES

AutoCAD SHX Text

AutoCAD SHX Text 114B

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text 114B

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

PARTIAL FLOOR PLAN - ARCHITECTURAL NEW WORK

AutoCAD SHX Text

SCALE: 1/4" =1'-0"

AutoCAD SHX Text

%%ULEGEND

AutoCAD SHX Text

NEW LED LIGHT FIXTURE

AutoCAD SHX Text

SMOKE DETECTOR

AutoCAD SHX Text 24"x24" LAY-IN CEILING SUPPLY DIFFUSER

AutoCAD SHX Text 24"x24" LAY-IN CEILING RETURN/EXHAUST REGISTER

AutoCAD SHX Text

HVAC CEILING MOUNTED UNIT

AutoCAD SHX Text

NEW PENDANT SPRINKLER HEAD CENTER OF TILE

AutoCAD SHX Text

RELOCATED DIFFUSER

AutoCAD SHX Text

SEE MECH. PLAN

AutoCAD SHX Text

NEW DIFFUSER SEE

AutoCAD SHX Text

MECH PLAN(TYP. FOR 10)

AutoCAD SHX Text

NEW LED LIGHT FIXTURE

AutoCAD SHX Text

SEE ELECTRICAL PLANS

AutoCAD SHX Text

NEW 9'-6" CEILING HEIGHT

AutoCAD SHX Text

REMOVE CEILING AND

AutoCAD SHX Text

GRID AS REQUIRED

AutoCAD SHX Text

TO INSTALL DUCTWORK

AutoCAD SHX Text

RELOCATED SPRINKLER HEAD, (TYP. FOR 3)

AutoCAD SHX Text

RELOCATED SPRINKLER HEAD

AutoCAD SHX Text

RELOCATE SP HEAD (TYP. FOR 3) SEE PLAN BELOW

AutoCAD SHX Text

SURFACE MOUNTED LIGHT FIXTURES REMOVED(TYP. FOR 4) SEE ELECTRICAL DRAWINGS

AutoCAD SHX Text

DUCTLESS COOLING UNITS REMOVED(TYP. FOR 3) SEE MECH. PLANS

AutoCAD SHX Text

ENTIRE GWB CEILING TO BE

AutoCAD SHX Text

REMOVED AS WELL AS ALL

AutoCAD SHX Text

SUPPORTING STUDS ABOVE

AutoCAD SHX Text

CEILING

AutoCAD SHX Text

RELOCATE SP HEAD SEE PLAN BELOW

AutoCAD SHX Text

REINSTALLED

AutoCAD SHX Text

SMOKE DETECTOR

AutoCAD SHX Text

REMOVED AND REINSTALLED

AutoCAD SHX Text

SMOKE DETECTOR

AutoCAD SHX Text AREA AROUND ENTIRE ROOM WHERE GWB CEILING MEETS WALL SHALL BE SANDED, PATCHED AND PAINTED TO ACCEPT NEW ACT SUPPORT TRACK

AutoCAD SHX Text PROVIDE COMPLETE 2'x2'

AutoCAD SHX Text

SUSPENDED CEILING SYSTEM

AutoCAD SHX Text

5/16" EXPOSED GRID INTERMEDIATE

AutoCAD SHX Text

DUTY SUSPENSION SYSTEM W/ 5/8"

AutoCAD SHX Text

MEDIUM TEXTURE MINERAL FIBER

AutoCAD SHX Text

(SQUARE CUT FLAT) CEILING SYSTEM

AutoCAD SHX Text

1 HR FIRE RATING

AutoCAD SHX Text

ACOUSTICAL CEILING TILE

AutoCAD SHX Text

ACT

AutoCAD SHX Text

GYPSUM WALL BOARD

AutoCAD SHX Text

GWB

AutoCAD SHX Text

EXISTING PENDANT SPRINKLER HEAD

AutoCAD SHX Text PROVIDE NEW SUPPORT FOR CEILING GRID AROUND DUCTWORK, REPLACE WITH NEW TILES IN AREA OF WORK

AutoCAD SHX Text

TYPICAL FOR NUMBER OF ITEMS LISTED

AutoCAD SHX Text

TYP.

AutoCAD SHX Text EXIST'G WALLS SHALL BE PRIMED AND PAINTED W/ (2) COATS OF PAINT SIMILAR TO SHERWIN WILLIAMS (COLOR #6119) ANTIQUE WHITE, ZERO VOC EGGSHELL FINISH(TYP. FOR WALL AREA WHERE CEILING WAS REMOVED AND NEW RETURN GRILLE IS INSTALLED)

AutoCAD SHX Text

EXISTING GYPSUM WALL

AutoCAD SHX Text NOTES: ADJUST SPRINKLER DROPS AS NECESSARY TO CLEAR OBSTRUCTIONS SUCH AS THE CEILING "T" BAR SUSPENSION SYSTEM, LIGHT FIXTURES, ETC. PROVIDE A PIPE HANGER IF THE HORIZONTAL OFFSET LENGTH EXCEEDS 24 INCHES.

AutoCAD SHX Text

CHROME ESCUTCHEON PLATE

AutoCAD SHX Text

SUSPENDED CEILING

AutoCAD SHX Text

1" X " PIPE REDUCING 12" PIPE REDUCING COUPLING

AutoCAD SHX Text

EXISTING SPRINKLER BRANCH LINE

AutoCAD SHX Text

1" BLACK STEEL SCHEDULE40 PIPING, TYPICAL

AutoCAD SHX Text

PROVIDE LENGTH TO SUIT

AutoCAD SHX Text

PROVIDE LENGTH TO SUIT

AutoCAD SHX Text

PROVIDE NEW CHROME PENDANT SPRINKLER HEAD LOCATE CENTER OF TILE

AutoCAD SHX Text

TYPICAL NEW PENDANT SPRINKLER

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

CRIPPLE STUD

AutoCAD SHX Text

CLIP ANGLES DESIGNED BY STUD MANUF..

AutoCAD SHX Text

HEADER CONNECTOR TRACK

AutoCAD SHX Text

%%UWALL OPENING HEADER

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

DOUBLE JAMB STUDS FULL HEIGHT WITH WOOD STUD BLOCKING

AutoCAD SHX Text No. 10 x 1/2" PAN HEAD SELF-DRILLING SCREW (TYP)

AutoCAD SHX Text

BOX HEADER AND JAMB

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

(1)#10-16 SCREW TYP. EACH FLANGE

AutoCAD SHX Text

(2) UNPUNCHED STUDS.

AutoCAD SHX Text ATTACH TOP & BOTTOM TRACK USING: (2)#10-16 SCREWS @ 24"o.c.

AutoCAD SHX Text

BUILT-UP HEADER

AutoCAD SHX Text

SEE PLAN FOR

AutoCAD SHX Text

WALL SURFACE

AutoCAD SHX Text

PROVIDE WOOD

AutoCAD SHX Text

BLOCKING IN

AutoCAD SHX Text

HEADER AND JAMB

AutoCAD SHX Text

HEADER AND JAMB FRAMING DETAIL

AutoCAD SHX Text

EXIST'G 9'-6" CEILING HEIGHT

AutoCAD SHX Text

PROVIDE NEW WALL OPENING

AutoCAD SHX Text

FOR SUPPLY AND RETURN

AutoCAD SHX Text

DUCTWORK - SEE MECH. DWGS.

W2018-362-01

O F

Y N

G C

O M

, R H

O D

H N

L U

N D

E R

S E

A W

A R

E C

E N

SHEET OF

CONTRACT NO.

NAVFAC DRAWING NO.

NUWC DRAWING NO.

SCALE:

SIZE: ANSI D

A P

P R

C H

E C

K E

D B

D E

N E

D B

D R

A W

N B

D A

S A

D A

SEAL

R E

S S

E S

C R

O N

D A

P P

AS NOTED

P A

A L

O R

C D

E M

B U

O O

K . B

O U

R . N

O N

A D

D E

D C

O O

K . B

O U

M-1

19-021A

AutoCAD SHX Text

PARTIAL FLOOR PLAN - HVAC DEMOLITION

AutoCAD SHX Text

SCALE: 1/4" =1'-0"

AutoCAD SHX Text

%%UDEMOLITION KEY NOTES

AutoCAD SHX Text

AutoCAD SHX Text EXISTING DUCTLESS EVAPORATOR UNITS TO BE REMOVED ALONG ALL REFRIGERANT AND DRAIN PIPING, WIRING, HANGERS, CONTROLS AND ALL RELATED APPURTENANCES.

AutoCAD SHX Text EXISTING DUCTWORK TO BE REMOVED ALONG WITH ALL INSULATION, HANGERS AND ALL RELATED APPURTENANCES TO LIMITS SHOWN. RELOCATE DIFFUSER TO NEW LOCATION SHOWN.

AutoCAD SHX Text

1. ALL DUCTWORK PIPING AND EQUIPMENT SHALL BE ALL DUCTWORK PIPING AND EQUIPMENT SHALL BE REMOVED FOR A COMPLETE NEW INSTALLATION, ALL DEMOLITION MAY NOT BE SHOWN FOR CLARITY, FIELD VERIFY ALL MECHANICAL EQUIPMENT TO BE REMOVED. 2. AT AREAS WHERE ABOVE CEILING WORK IS TO TAKE PLACE, AT AREAS WHERE ABOVE CEILING WORK IS TO TAKE PLACE, THE CEILING TILES AND GRID SHALL BE REMOVED FOR DEMOLITION AND REINSTALLED ONCE THE NEW WORK IS COMPLETE.

AutoCAD SHX Text

%%UDEMOLITION NOTES

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text 114B

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text EXISTING WALL MOUNTED CONDENSING UNITS TO BE REMOVED ALONG ALL REFRIGERANT PIPING, WIRING, HANGERS, CONTROLS AND ALL RELATED APPURTENANCES. (TYPICAL FOR THREE)

AutoCAD SHX Text

EXIST'G RETURN

AutoCAD SHX Text

DUCTWORK

AutoCAD SHX Text

EXIST'G SUPPLY

AutoCAD SHX Text

DUCTWORK

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

LRP14

AutoCAD SHX Text

EXIST'G CONDENSERS TO REMAIN SERVING ROOM 116

AutoCAD SHX Text

THIRD CONDENSING UNIT

AutoCAD SHX Text

MOUNTED ON WALL BELOW

AutoCAD SHX Text

CAULK ALL EXIST'G WALL

AutoCAD SHX Text

OPENINGS WATERTIGHT AS WELL AS

AutoCAD SHX Text

ALL SUPPORT BRACKET OPENINGS

O F

Y N

G C

O M

, R H

O D

H N

L U

N D

E R

S E

A W

A R

E C

E N

SHEET OF

CONTRACT NO.

NAVFAC DRAWING NO.

NUWC DRAWING NO.

SCALE:

SIZE: ANSI D

A P

P R

C H

E C

K E

D B

D E

N E

D B

D R

A W

N B

D A

S A

D A

SEAL

R E

S S

E S

C R

O N

D A

P P

AS NOTED

P A

A L

O R

C N

E W

W O

R K

B U

O O

K . B

O U

R . N

O N

A D

D E

D C

O O

K . B

O U

M-2

19-021A

AutoCAD SHX Text

PARTIAL FLOOR PLAN - HVAC NEW WORK

AutoCAD SHX Text

SCALE: 1/4" =1'-0"

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text 114B

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text 36"x18"

AutoCAD SHX Text 36"x14"

AutoCAD SHX Text 30"x14"

AutoCAD SHX Text 26"x12"

AutoCAD SHX Text 16"x12"

AutoCAD SHX Text 14"x8"

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

CHWR

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

CHWR

AutoCAD SHX Text MOUNT & SECURE ACC UNIT ON 4" HIGH CONCRETE PAD 6" BIGGER THAN UNIT ALL AROUND, MAINTAIN CLEARANCES REQUIRED BY MANUF.

AutoCAD SHX Text

EXIST'G CONDENSERS

AutoCAD SHX Text

RL & RS LINES DROP

AutoCAD SHX Text

AT WALL

AutoCAD SHX Text

RL & RS LINES DROP AT WALL

AutoCAD SHX Text

CHWS & CHWR LINES DROP AT WALL

AutoCAD SHX Text

EXIST'G 3" CHWR TO CHILLER

AutoCAD SHX Text

EXIST'G 6" CHWS TO SYSTEM

AutoCAD SHX Text

EXIST'G 6" CHWS FROM CHILLER

AutoCAD SHX Text

CHWR

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

CONNECT NEW 2" CHWS TO

AutoCAD SHX Text

EXIST'G 6" CHWS AFTER PUMPS

AutoCAD SHX Text

CONNECT NEW 2" CHWR TO

AutoCAD SHX Text

EXIST'G 3" CHWR BACK TO CHILLER

AutoCAD SHX Text

PROVIDE BALL VALVE AT EACH

AutoCAD SHX Text

CONNECTION AND A FLOW CONTROL

AutoCAD SHX Text

BALANCING VALVE ON RETURN

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text 1B

AutoCAD SHX Text

CRU

AutoCAD SHX Text 1A

AutoCAD SHX Text

CRU

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

3/4" CONDENSATE LINE

AutoCAD SHX Text

DROP AT WALL

AutoCAD SHX Text

3/4" CONDENSATE LINE THRU

AutoCAD SHX Text

WALL AT 12" ABOVE GRADE

AutoCAD SHX Text

DISCHARGE TO SPLASH BLOCK

AutoCAD SHX Text

SLEEVE AND CAULK ALL WALL PENETRATIONS WATERTIGHT

AutoCAD SHX Text 2"

AutoCAD SHX Text

COORDINATE NEW DUCTWORK

AutoCAD SHX Text

WITH EXIST'G RELOCATE DUCTWORK

AutoCAD SHX Text

AS REQUIRED FOR NEW INSTALLATION

AutoCAD SHX Text

SEE SECTION

AutoCAD SHX Text

DETAIL ON M-4

AutoCAD SHX Text

SMOKE DETECTOR, PROVIDED

AutoCAD SHX Text

AND WIRED BY ELEC. CONTR.

AutoCAD SHX Text

INSTALLED BY HVAC CONTR.

AutoCAD SHX Text T

AutoCAD SHX Text S

O F

Y N

G C

O M

, R H

O D

H N

L U

N D

E R

S E

A W

A R

E C

E N

SHEET OF

CONTRACT NO.

NAVFAC DRAWING NO.

NUWC DRAWING NO.

SCALE:

SIZE: ANSI D

A P

P R

C H

E C

K E

D B

D E

N E

D B

D R

A W

N B

D A

S A

D A

SEAL

R E

S S

E S

C R

O N

D A

P P

AS NOTED

E N

D A

N D

G E

N E

R A

L N

B U

O O

K . B

O U

R . N

O N

A D

D E

D C

O O

K . B

O U

M-3

19-021A

AutoCAD SHX Text

DIRECTION OF FLOW (PUMPED)

AutoCAD SHX Text T

AutoCAD SHX Text

DIFFUSER MARK (CFM)

AutoCAD SHX Text

THERMOSTAT

AutoCAD SHX Text

FLOW CONTROL BALANCING VALVE

AutoCAD SHX Text

2-WAY CONTROL VALVE

AutoCAD SHX Text

PIPE CAP

AutoCAD SHX Text

GATE VALVE

AutoCAD SHX Text

BALL VALVE

AutoCAD SHX Text

DEG., %%D%%

AutoCAD SHX Text

EWB

AutoCAD SHX Text

DEGREES

AutoCAD SHX Text

ENTERING WET BULB

AutoCAD SHX Text

APD

AutoCAD SHX Text

ACC

AutoCAD SHX Text

BACKDRAFT DAMPER

AutoCAD SHX Text

AIR COOLED CONDENSING UNIT

AutoCAD SHX Text

AIR PRESSURE DROP

AutoCAD SHX Text

AIR SEPARATOR

AutoCAD SHX Text

SAT

AutoCAD SHX Text

SUPPLY AIR TEMPERATURE

AutoCAD SHX Text

SUPPLY AIR

AutoCAD SHX Text

RETURN AIR

AutoCAD SHX Text

MOTOR OPERATED DAMPER

AutoCAD SHX Text

OUTSIDE AIR

AutoCAD SHX Text

MBH

AutoCAD SHX Text

1000 BTU'S PER HOUR

AutoCAD SHX Text

DIRECTION OF PITCH (GRAVITY FLOW)

AutoCAD SHX Text

DDC

AutoCAD SHX Text

DIRECT DIGITAL CONTROL

AutoCAD SHX Text

CFM

AutoCAD SHX Text

CUBIC FEET PER MINUTE

AutoCAD SHX Text

EAT

AutoCAD SHX Text

ENTERING AIR TEMPERATURE

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

TYPICAL (AT ALL SIMILAR CONDITIONS)

AutoCAD SHX Text

3-WAY CONTROL VALVE

AutoCAD SHX Text

WPD

AutoCAD SHX Text

WATER PRESSURE DROP

AutoCAD SHX Text

CONDENSATE DRAIN PIPING (A/C)

AutoCAD SHX Text D

AutoCAD SHX Text

ESP

AutoCAD SHX Text

EXTERNAL STATIC PRESSURE

AutoCAD SHX Text

EXHAUST REGISTER

AutoCAD SHX Text P

AutoCAD SHX Text

PUMP

AutoCAD SHX Text

CRU

AutoCAD SHX Text

COMPUTER ROOM UNIT

AutoCAD SHX Text

CPS

AutoCAD SHX Text

CONDENSATE PUMP SET

AutoCAD SHX Text

CHILLED WATER SUPPLY PIPING

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

CHILLED WATER RETURN PIPING

AutoCAD SHX Text

CHWR

AutoCAD SHX Text

RETURN/EXHAUST AIR DUCT SECTION (NEGATIVE)

AutoCAD SHX Text

VOLUME DAMPER

AutoCAD SHX Text

SUPPLY AIR DUCT SECTION (POSITIVE)

AutoCAD SHX Text 12"x10"

AutoCAD SHX Text

DUCTWORK SIZE (IN WIDTH X IN HEIGHT)

AutoCAD SHX Text

EQUIPMENT TAG

AutoCAD SHX Text

REFRIGERANT LIQUID

AutoCAD SHX Text

REFRIGERANT SUCTION

AutoCAD SHX Text

DIA., %%C

AutoCAD SHX Text

DIAMETER

AutoCAD SHX Text

SUPPLY AIR DIFFUSER

AutoCAD SHX Text

RETURN OR EXHAUST AIR GRILLE

AutoCAD SHX Text

LDB

AutoCAD SHX Text

LEAVING DRY BULB

AutoCAD SHX Text

COND

AutoCAD SHX Text

CONDENSING UNIT

AutoCAD SHX Text

DCU

AutoCAD SHX Text

DUCTLESS COOLING UNIT

AutoCAD SHX Text

MCA

AutoCAD SHX Text

MINIMUM CIRCUIT AMPS

AutoCAD SHX Text

INCHES OF WATER COLUMN

AutoCAD SHX Text

FIRE DAMPER

AutoCAD SHX Text

ITEM

AutoCAD SHX Text

FIRE DAMPER

AutoCAD SHX Text

OBD

AutoCAD SHX Text

OPPOSED BLADE DAMPER

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text R

AutoCAD SHX Text

EXISTING WORK SHOWN LIGHT

AutoCAD SHX Text

NEW WORK SHOWN DARK

AutoCAD SHX Text

CONNECT TO EXISTING

AutoCAD SHX Text

EXISTING PIPING OR EQUIPMENT TO BE REMOVED

AutoCAD SHX Text

STRAINER

AutoCAD SHX Text

PRESSURE GAUGE

AutoCAD SHX Text

PRESSURE RELIEF VALVE

AutoCAD SHX Text

TEMPERATURE GAUGE

AutoCAD SHX Text

PIPE RISE OR UP

AutoCAD SHX Text

PIPE DROP OR DOWN

AutoCAD SHX Text

VACUUM BREAKER

AutoCAD SHX Text

CHECK VALVE

AutoCAD SHX Text

BACKDRAFT DAMPER

AutoCAD SHX Text

MOTOR OPERATED DAMPER

AutoCAD SHX Text

REFRIGERANT SUCTION

AutoCAD SHX Text

REFRIGERANT LIQUID

AutoCAD SHX Text

ANGLE GLOBE VALVE

AutoCAD SHX Text

BUTERFLY VALVE

AutoCAD SHX Text

VOLUME DAMPER

AutoCAD SHX Text

LPS

AutoCAD SHX Text

LOW PRESSURE STEAM

AutoCAD SHX Text

LPR

AutoCAD SHX Text

LOW PRESSURE RETURN

AutoCAD SHX Text

CHWR

AutoCAD SHX Text

CHILLED WATER RETURN

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

CHILLED WATER SUPPLY

AutoCAD SHX Text

RELATIVE HUMIDITY

AutoCAD SHX Text

EDB

AutoCAD SHX Text

ENTERING DRY BULB

AutoCAD SHX Text

LWB

AutoCAD SHX Text

LEAVING WET BULB

AutoCAD SHX Text

WTD

AutoCAD SHX Text

WATER TEMPERATURE DROP

AutoCAD SHX Text

EWT

AutoCAD SHX Text

ENTERING WATER TEMPERATURE

AutoCAD SHX Text

LWT

AutoCAD SHX Text

LEAVING WATER TEMPERATURE

AutoCAD SHX Text 34.

AutoCAD SHX Text 35.

AutoCAD SHX Text 36.

AutoCAD SHX Text 1.

AutoCAD SHX Text 2.

AutoCAD SHX Text 3.

AutoCAD SHX Text 4.

AutoCAD SHX Text 28.

AutoCAD SHX Text 5.

AutoCAD SHX Text 6.

AutoCAD SHX Text 7.

AutoCAD SHX Text 8.

AutoCAD SHX Text 9.

AutoCAD SHX Text 10.

AutoCAD SHX Text 11.

AutoCAD SHX Text

THERMOSTATS SHALL BE LOCATED IN THE ROOMS INDICATED. INSTALL AT 4'-0"

AutoCAD SHX Text 12.

AutoCAD SHX Text 13.

AutoCAD SHX Text 14.

AutoCAD SHX Text 15.

AutoCAD SHX Text

NO HYDRONIC PIPING SHALL BE SMALLER THAN 3/4" UNLESS OTHERWISE NOTED.

AutoCAD SHX Text 16.

AutoCAD SHX Text

RUNOUTS SHALL PITCH DOWN IN DIRECTION OF FLOW A MINIMUM OF 1/8" PER FOOT.

AutoCAD SHX Text 17.

AutoCAD SHX Text 18.

AutoCAD SHX Text 19.

AutoCAD SHX Text 20.

AutoCAD SHX Text 21.

AutoCAD SHX Text 29.

AutoCAD SHX Text 22.

AutoCAD SHX Text

CORRECT SETTING ON BALANCING FITTINGS SHALL BE PERMANENTLY MARKED.

AutoCAD SHX Text 23.

AutoCAD SHX Text 24.

AutoCAD SHX Text

FOR LOCATION OF MOTOR STARTERS, SEE ELECTRICAL DRAWINGS.

AutoCAD SHX Text

PROVIDE MANUAL AIR VENTS AT HIGH POINTS OF SYSTEM.

AutoCAD SHX Text 25.

AutoCAD SHX Text 26.

AutoCAD SHX Text 27.

AutoCAD SHX Text

PROVIDE MINIMUM PITCH SUFFICIENT TO INSURE ADEQUATE VENTING AND DRAINAGE.

AutoCAD SHX Text 30.

AutoCAD SHX Text 31.

AutoCAD SHX Text 32.

AutoCAD SHX Text 33.

AutoCAD SHX Text

DAMPER MOTORS AND/OR MOTOR OPERATED DAMPERS.

AutoCAD SHX Text

FIRE DAMPERS AND SMOKE DAMPERS.

AutoCAD SHX Text INSTALL ALL EQUIPMENT IN STRICT ACCORDANCE WITH MANUFACTURER'S WRITTEN INSTRUCTIONS.

AutoCAD SHX Text PATCH ALL HOLES FROM REMOVAL OF PIPING, DUCTWORK, AND/OR EQUIPMENT TO MATCH EXISTING ADJACENT CONSTRUCTION.

AutoCAD SHX Text PROVIDE ALL MATERIALS AND EQUIPMENT AND PERFORM ALL LABOR REQUIRED TO INSTALL COMPLETE AND OPERABLE MECHANICAL SYSTEMS AS INDICATED ON THE DRAWINGS, SPECIFIED AND AS REQUIRED BY CODE.

AutoCAD SHX Text

FIELD VERIFY ALL DIMENSIONS.

AutoCAD SHX Text UNLESS INDICATED OTHERWISE, PIPING AND DUCTWORK TO BE REMOVED SHALL INCLUDE ASSOCIATED HANGERS, INSULATION, AND OTHER APPURTENANCES.

AutoCAD SHX Text IT IS THE INTENTION OF THE DRAWINGS TO COVER ALL WORK AND MATERIAL FOR A COMPLETE FIRST CLASS INSTALLATION. ANY EQUIPMENT, TRIM HARDWARE AND/OR DEVICES USUALLY UTILIZED IN CLASS OF WORK, THOUGH NOT SPECIFICALLY MENTIONED OR SHOWN ON THE DRAWINGS, BUT WHICH MAY BE NECESSARY FOR THE SATISFACTORY COMPLETION OF WORK (AS DETERMINED BY THE CONTRACTING OFFICER) SHALL BE FURNISHED AND INSTALLED BY THE CONTRACTOR AS PART OF HIS TOTAL WORK.

AutoCAD SHX Text 37.

AutoCAD SHX Text 38.

AutoCAD SHX Text 39.

AutoCAD SHX Text 40.

AutoCAD SHX Text 41.

AutoCAD SHX Text 42.

AutoCAD SHX Text 43.

AutoCAD SHX Text ENTIRE INSTALLATION, INCLUDING MATERIALS, EQUIPMENT, AND WORKMANSHIP, SHALL CONFORM WITH ALL UFC GUIDELINES AND UFGS SPECIFICATIONS, APPLICABLE LAWS, CODES, AND REGULATIONS OF MUNICIPAL, STATE, AND FEDERAL AUTHORITIES, ALSO THE LATEST EDITION OF THE STATE BUILDING CODES, APPLICABLE ARI STANDARDS AND OTHER REGULATORY BODIES HAVING JURISDICTION OVER THE CLASS OF WORK. WHERE APPLICABLE, MATERIALS AND EQUIPMENT SHALL HAVE STAMPS OR SEALS OF ARI, ASME, UL, OR ASTM. THE CONTRACTOR SHALL MAKE TESTS FOR ACCEPTANCE AND APPROVAL BY CODE AND THE REQUIREMENTS OF APPLICABLE REGULATORY AGENCIES. REQUIRED TESTS SHALL BE PERFORMED IN THE PRESENCE OF THE GOVERNMENT UNLESS OTHERWISE WAIVED IN WRITING.

AutoCAD SHX Text CONTRACTOR SHALL GUARANTEE ALL WORK FOR A PERIOD OF ONE YEAR FROM DATE OF SUBSTANTIAL COMPLETION.

AutoCAD SHX Text EXISTING DUCTWORK, PIPE, AND EQUIPMENT SIZES NOTED ARE FOR THE CONVENIENCE OF THE CONTRACTOR ONLY AND ARE NOT WARRANTED TO BE CORRECT. THE CONTRACTOR SHALL FIELD VERIFY ALL EXISTING DUCT, PIPE, AND EQUIPMENT SIZES AND THEIR RESPECTIVE LOCATIONS BEFORE PROCEEDING WITH ANY WORK.

AutoCAD SHX Text CUT OPENINGS, AS REQUIRED, IN THE EXISTING CONSTRUCTION FOR THE INSTALLATION OF NEW DUCTWORK, PIPING, AND EQUIPMENT. PATCH AND REPAIR TO MATCH THE EXISTING ADJACENT CONSTRUCTION. NEW OPENINGS IN EXISTING CONCRETE MASONRY CONSTRUCTION SHALL BE SAW CUT.

AutoCAD SHX Text LAYOUT OF PIPING IS DIAGRAMMATIC. RUN ALL EXPOSED PIPING AS HIGH AS POSSIBLE UNLESS OTHERWISE NOTED. ALLOW FOR RISES, DROPS, AND OFFSETS AS REQUIRED.

AutoCAD SHX Text AFTER THE PIPING IS INSULATED, PROVIDE SETON BRAND OR EQUAL FACTORY-FABRICATED PIPE LABELS, WITH DIRECTION OF FLOW ARROWS, ON THE PIPING, AT 10 FEET ON CENTER ON THE PIPING MAINS AND 5 FEET ON CENTER ON THE BRANCH RUNOUTS FROM MAINS.

AutoCAD SHX Text TAB WORK: TAB EACH PHASE AFTER PHASE COMPLETION AND TAB COMPLETE BUILDING SYSTEM AFTER ALL PHASES ARE COMPLETE.

AutoCAD SHX Text CONSTRUCTION PHASING: THE BUILDING WILL REMAIN OCCUPIED AND IN-SERVICE THROUGHOUT THE CONSTRUCTION PROCESS. PHASING OF THE WORK WILL BE REQUIRED TO ACCOMPLISH THIS GOAL. ONLY PARTIAL SHUT DOWN OF THE BUILDING WILL BE PERMITTED. THE CONTRACTOR'S OPERATION SHALL CAUSE MINIMAL DISTURBANCE TO THE DAILY OPERATIONS OF THE REMAINDER OF THE BUILDING. A BUILDING ESCORT WILL BE REQUIRED FOR THIS WORK.

AutoCAD SHX Text 44.

AutoCAD SHX Text 45.

AutoCAD SHX Text

%%ULEGEND

AutoCAD SHX Text

%%UGENERAL NOTES

AutoCAD SHX Text OUTSIDE AIR INTAKE OPENINGS FOR VENTILATION AIR SHALL BE LOCATED 10 FEET MEASURED IN ANY DIRECTION FROM ANY FLUES, VENTS, CHIMNEYS, PLUMBING VENTS UNLESS TOP OF SUCH INTAKE OPENING IS 2 FEET BELOW ANY OF THE LISTED ITEMS.

AutoCAD SHX Text EXTEND DRAIN LINES AS INDICATED. ROUTING SHALL NOT INTERFERE WITH PASSAGEWAYS AND MAINTENANCE. DRAINS FROM AIR CONDITIONING CONDENSATE DRAIN PANS SHALL BE TRAPPED AND INSULATED. SLOPE SUSPENDED CONDENSATE DRAIN PIPING AT 1/8" PER FOOT.

AutoCAD SHX Text

SECURITY BARS

AutoCAD SHX Text COORDINATE LOCATION OF GRILLES, REGISTERS, DIFFUSERS, THERMOSTATS AND OTHER WALL OR CEILING MOUNTED HVAC ACCESSORIES WITH THE EXISTING REFLECTED CEILING. REMOVE SECTIONS OF CEILING GRID AS NEEDED TO ALLOW FOR THE OPERATION OF LIFTS AND/OR THE ERECTION OF SCAFFOLDING. ANY DAMAGE MADE TO THE CEILING GRID STRUCTURE AS A RESULT OF WORK ASSOCIATED WITH THIS CONTRACT SHALL BE REPLACED BY THE CONTRACTOR.

AutoCAD SHX Text ARRANGE PIPING AND DUCTWORK, PARTICULARLY ABOVE CEILING, AS REQUIRED TO CLEAR STRUCTURE, DUCTS, CONDUIT, ETC. ALLOWING SPACE FOR PIPE HANGERS, EXPANSION LOOPS AND ACCESS TO VALVES, FILTERS AND MAINTENANCE OF EQUIPMENT.

AutoCAD SHX Text EQUIPMENT WITH FILTERS SHALL BE INSTALLED SO THAT FILTERS CAN BE EASILY REMOVED AND REPLACED.

AutoCAD SHX Text OVERHEAD DUCTWORK AND PIPING IN SPACES WITH CEILINGS SHALL BE CONCEALED OR IN WALLS OR CHASES UNLESS OTHERWISE NOTED.

AutoCAD SHX Text OVERHEAD PIPING IN SPACES WITHOUT HUNG CEILINGS SHALL BE RUN AS CLOSE TO ROOF DECK AS PRACTICABLE, AS CLOSE TO PARALLEL JOISTS AS POSSIBLE AND ABOVE LIGHTING FIXTURES TO CONCEAL PIPING.

AutoCAD SHX Text GENERAL NOTES ON THIS DRAWING ARE APPLICABLE TO EACH MECHANICAL DRAWING OF THIS SET. SEE EACH DRAWING FOR SPECIFIC NOTES APPLICABLE TO THAT DRAWING.

AutoCAD SHX Text COORDINATE LOCATION AND INSTALLATION OF EQUIPMENT WITH OTHER TRADES. DUCTWORK AROUND OBSTRUCTIONS AT NO ADDITIONAL COST TO OFFSET PIPING AND THE GOVERNMENT.

AutoCAD SHX Text CONTRACTOR SHALL VERIFY REFRIGERANT PIPE SIZES WITH EQUIPMENT MANUFACTURER FOR THE INDICATED INSTALLATION.

AutoCAD SHX Text VALVES AND SPECIALTIES SHALL BE LINE SIZE, EXCEPT FOR CONTROL & BALANCING VALVES OR UNLESS NOTED OTHERWISE.

AutoCAD SHX Text

ABOVE FINISH FLOOR.

AutoCAD SHX Text PIPING AND DUCTWORK INSULATION SHALL BE RUN CONTINUOUSLY THROUGH NON- RATED FLOORS, WALLS AND PARTITIONS, UNLESS OTHERWISE NOTED.

AutoCAD SHX Text FOR PIPE SIZES NOT INDICATED ON PLANS SEE EQUIPMENT MANUFACTURER CONNECTION DETAILS.

AutoCAD SHX Text PROVIDE UNION OR FLANGED CONNECTIONS AT EACH PIECE OF EQUIPMENT AND ON BOTH SIDES OF CONTROL VALVES AND PRESSURE REGULATING VALVES. PROVIDE SHUT-OFF VALVES ON BOTH SIDES OF AUTOMATIC VALVES.

AutoCAD SHX Text RELIEF VALVE DRAIN PIPING SHALL BE EXTENDED TO 6" (150) ABOVE FINISHED FLOOR UNLESS OTHERWISE NOTED.

AutoCAD SHX Text PIPING SHALL BE SUPPORTED IN ACCORDANCE WITH THE SPECIFICATION. ADDITIONAL SUPPORTS OR HANGERS SHALL BE ADJACENT TO ELBOWS, TO PREVENT WEIGHT OF PIPING BEING PLACED ON THE EQUIPMENT.

AutoCAD SHX Text LOCATE AND SIZE CONCRETE PADS AND CURBS FOR MECHANICAL EQUIPMENT IN ACCORDANCE WITH ACTUAL EQUIPMENT PURCHASED.

AutoCAD SHX Text PROVIDE 1/2" DRAIN VALVES AND CAPPED CONNECTIONS AT LOW POINTS IN PIPING SYSTEMS FOR DRAINAGE.

AutoCAD SHX Text PROVIDE SWING JOINTS FOR RUNOUTS AND BRANCH PIPING FROM MAINS FOR EXPANSION MOVEMENT.

AutoCAD SHX Text PROVIDE A MINIMUM OF THREE TIMES THE FAN DIAMETER OF STRAIGHT DUCTWORK OFF THE SUPPLY AIR DISCHARGE BEFORE ANY TAKEOFFS OR ELBOWS.

AutoCAD SHX Text PROVIDE ACCESS DOORS IN DUCTWORK WHERE INDICATED OR REQUIRED FOR ACCESS TO SYSTEM COMPONENTS INCLUDING THE FOLLOWING:

AutoCAD SHX Text EXISTING HVAC PIPING, DUCTWORK AND EQUIPMENT SHOWN IS BASED ON EXISTING AND FIELD OBSERVATION WITHOUT DEMOLITION. DURING DEMOLITION, ANY CLARIFICATION REQUIRED TO DETERMINE SCOPE OF WORK SHALL BE BROUGHT TO THE ATTENTION OF THE CONTRACTING OFFICER.

AutoCAD SHX Text THE CONTRACTOR SHALL VISIT THE JOB SITE AND THOROUGHLY FAMILIARIZE HIMSELF WITH EXISTING CONDITIONS, PROIR TO STARTING DEMOLITION.

AutoCAD SHX Text DRAWINGS DO NOT SHOW EVERY EXISTING PIPE, CONDUIT, DUCT, ETC. CONTRACTOR SHALL TAKE CARE TO REMOVE ONLY ITEMS REQUIRED TO BE REMOVED AND VERIFY PIPES, DUCTS, ETC. BEFORE REMOVAL.

AutoCAD SHX Text

AHU

AutoCAD SHX Text

AIR HANDLING UNIT

AutoCAD SHX Text

AFF

AutoCAD SHX Text

ABOVE FINISHED FLOOR

AutoCAD SHX Text S

AutoCAD SHX Text

SMOKE DETECTOR

O F

Y N

G C

O M

, R H

O D

H N

L U

N D

E R

S E

A W

A R

E C

E N

SHEET OF

CONTRACT NO.

NAVFAC DRAWING NO.

NUWC DRAWING NO.

SCALE:

SIZE: ANSI D

A P

P R

C H

E C

K E

D B

D E

N E

D B

D R

A W

N B

D A

S A

D A

SEAL

R E

S S

E S

C R

O N

D A

P P

AS NOTED

S C

H E

D U

N D

D E

S H

E E

- H

B U

O O

K . B

O U

R . N

O N

A D

D E

D C

O O

K . B

O U

M-4

19-021A

AutoCAD SHX Text

ADJ. HANGER W/ ROLLER

AutoCAD SHX Text

(PIPE OVER 3")

AutoCAD SHX Text

PIPE SIZE

AutoCAD SHX Text

UP TO 2"

AutoCAD SHX Text 2.5", 3"

AutoCAD SHX Text

INSULATION SHIELD

AutoCAD SHX Text

GALVANIZED

AutoCAD SHX Text

12" LONG

AutoCAD SHX Text

HANGER ROD SCHEDULE

AutoCAD SHX Text

(PIPE UP TO 3")

AutoCAD SHX Text

CLEVIS HANGER

AutoCAD SHX Text

SADDLE

AutoCAD SHX Text

PIPE COVERING

AutoCAD SHX Text

PROTECTION

AutoCAD SHX Text

(TYP)

AutoCAD SHX Text

INSULATION

AutoCAD SHX Text

SUPPORTING NUT

AutoCAD SHX Text

LOCKING NUT

AutoCAD SHX Text

PIPE

AutoCAD SHX Text

(TYP)

AutoCAD SHX Text

THIS CONNECTION SHALL BE USED AT ALL

AutoCAD SHX Text

BRANCHES FROM MAINS AND SUB-MAINS.

AutoCAD SHX Text

BALANCING DAMPERS SHALL BE PROVIDED.

AutoCAD SHX Text

%%UBRANCH CONNECTION DETAILS

AutoCAD SHX Text

MAIN DUCT

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text 6"

AutoCAD SHX Text 45%%D

AutoCAD SHX Text

VOLUME DAMPER (VD.)

AutoCAD SHX Text

BRANCH DUCT

AutoCAD SHX Text

OPPOSED BLADE

AutoCAD SHX Text

DUCT MAIN

AutoCAD SHX Text

DIFFUSER

AutoCAD SHX Text

T-BAR

AutoCAD SHX Text

SUSPENDED

AutoCAD SHX Text

%%UDIFFUSER CONNECTION DETAIL

AutoCAD SHX Text

CEILING DIFFUSER (TYP,)

AutoCAD SHX Text

SPIN TAP SHALL

AutoCAD SHX Text

BE FULL SIZE OF

AutoCAD SHX Text

DAMPER

AutoCAD SHX Text

NECK

AutoCAD SHX Text

CEILING

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

BAND

AutoCAD SHX Text

BAND AT DIFFUSER

AutoCAD SHX Text

NECK

AutoCAD SHX Text

ATTACH METALLIC FLEX

AutoCAD SHX Text

DUCT TO DIFFUSER

AutoCAD SHX Text

DIFFUSER NECK

AutoCAD SHX Text

WITH VD.

AutoCAD SHX Text

NECK WITH BAND

AutoCAD SHX Text

MAX 5'-0"

AutoCAD SHX Text

ROD SIZE

AutoCAD SHX Text

PIPE SIZE

AutoCAD SHX Text

ROD SIZE

AutoCAD SHX Text 3/8"

AutoCAD SHX Text 5/8"

AutoCAD SHX Text 4" & 5"

AutoCAD SHX Text 5/8"

AutoCAD SHX Text 6"-14"

AutoCAD SHX Text 7/8"

AutoCAD SHX Text

%%UPIPE HANGER DETAIL

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

THIS CONNECTION SHALL BE USED AT ALL

AutoCAD SHX Text

BRANCHES FROM MAINS AND SUB-MAINS.

AutoCAD SHX Text

VOLUME DAMPERS SHALL BE PROVIDED.

AutoCAD SHX Text

%%UTEE BRANCH CONNECTION DETAILS

AutoCAD SHX Text

BRANCH DUCT

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

VOLUME DAMPER (VD.)

AutoCAD SHX Text

MAIN DUCT

AutoCAD SHX Text

BRANCH DUCT

AutoCAD SHX Text

DOUBLE THICKNESS

AutoCAD SHX Text

TURNING VANES

AutoCAD SHX Text

VOLUME DAMPER (VD.)

AutoCAD SHX Text

INSULATE DIFFUSER NECK

AutoCAD SHX Text

FAN TOTAL STATIC + 1"

AutoCAD SHX Text

UNIT

AutoCAD SHX Text

THRU

AutoCAD SHX Text

DRAW-

AutoCAD SHX Text

NOTE A

AutoCAD SHX Text

NOTE B

AutoCAD SHX Text

2" MIN

AutoCAD SHX Text B.

AutoCAD SHX Text A.

AutoCAD SHX Text

EXTEND TO LOCATION INDICATED.

AutoCAD SHX Text

DRAIN SHALL BE FULL SIZE OF UNIT CONNECTION.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

REMOVABLE CAP W/ 1/4" HOLE

AutoCAD SHX Text

%%UDRAIN PAN TRAP DETAIL

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

#4 @ 12" O/C EACH WAY

AutoCAD SHX Text

FINISH GRADE

AutoCAD SHX Text

3/4" CHAMFER

AutoCAD SHX Text

EQUIPMENT

AutoCAD SHX Text

%%UEXTERIOR EQUIPMENT PAD DETAIL

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text 8"

AutoCAD SHX Text 4"

AutoCAD SHX Text

BUILDING

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

CHWR

AutoCAD SHX Text

CIRCUIT SETTER

AutoCAD SHX Text

BALANCING VALVE

AutoCAD SHX Text

OPEN/CLOSE 3 WAY

AutoCAD SHX Text

CONTROL VALVE

AutoCAD SHX Text

TRAP

AutoCAD SHX Text

DRAIN PAN

AutoCAD SHX Text D

AutoCAD SHX Text

COIL

AutoCAD SHX Text

%%UCHILLED WATER COIL DETAIL

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

BALL VALVE

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text

STRAINER

AutoCAD SHX Text

UNION

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text

MANUAL AIR VENT

AutoCAD SHX Text

1/2" DRAIN VALVE

AutoCAD SHX Text

BALANCING VALVE

AutoCAD SHX Text

MARK

AutoCAD SHX Text S/A

AutoCAD SHX Text CEILING 24"x24" FLAT LAY-IN

AutoCAD SHX Text

SUPPLY DIFFUSER SCHEDULE

AutoCAD SHX Text

DIMENSION

AutoCAD SHX Text

(IN)

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text

ALUMINUM

AutoCAD SHX Text

THROW

AutoCAD SHX Text BASIS OF DESIGN PRICE INDUSTRIES. DIFFUSERS MODEL AMDX AND SHALL BE WELDED WITH MULTI ORIFICED JET INDUCTION WITH DIFFUSING VANES AND OPPOSED BLADE DAMPERS.

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

1-WAY

AutoCAD SHX Text 12"x12"

AutoCAD SHX Text

SCALE: 1/2" = 1'-0"

AutoCAD SHX Text

%%USECTION THROUGH NEW CRU(TYPICAL)

AutoCAD SHX Text 18"x36" SA

AutoCAD SHX Text

DUCT

AutoCAD SHX Text

AutoCAD SHX Text 1A

AutoCAD SHX Text

CRU

AutoCAD SHX Text

CHWR

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

NEW ACT CEILING

AutoCAD SHX Text

RAISED FLOOR

AutoCAD SHX Text 32"x58" SA DUCT CONNECTION

AutoCAD SHX Text

AT TOP OF UNIT, MAY VARY

AutoCAD SHX Text

BASED ON MANUF. SELECTED

AutoCAD SHX Text 38"x48" RA DUCT CONNECTION

AutoCAD SHX Text

AT BACK OF UNIT, MAY VARY

AutoCAD SHX Text

BASED ON MANUF. SELECTED

AutoCAD SHX Text

4" FLEX CONNECTION

AutoCAD SHX Text

4" FLEX CONNECTION

AutoCAD SHX Text

MARK

AutoCAD SHX Text

LOCATION

AutoCAD SHX Text

COMPUTER ROOM UNIT DUEL COOL SPLIT SYSTEMS SCHEDULE

AutoCAD SHX Text NOTES: 1. AIR COOLED SPLIT SYSTEM WITH FLOOR MOUNTED EVAPORATOR WITH DX AND CHILLED WATER ECONOCOIL W/ 35% PROPYLENE GLYCOL AND REMOTE DX CONDENSER WITH COATED COILS. : 1. AIR COOLED SPLIT SYSTEM WITH FLOOR MOUNTED EVAPORATOR WITH DX AND CHILLED WATER ECONOCOIL W/ 35% PROPYLENE GLYCOL AND REMOTE DX CONDENSER WITH COATED COILS. 2. COPPER TUBE/ALUMINUM FIN FOR EVAPORATOR COIL. 3. CONDENSING UNIT SHALL BE ABLE TO OPERATE AT LOW AMBIENT TEMPERATURE AS LOW AS -30°F. 4. PROVIDE BUILT IN CONDENSATE PUMP. 5. PROVIDE RIGHT SIDE PIPING CONNECTIONS. 6. SMOKE DETECTOR. 7. REMOTE TEMPERATURE SENSORS. 8. PROVIDE DISCHARGE PLENUM, FLOOR STAND, ELECTRIC REHEAT, COND PUMP, WATER DETECTION, AND INTERFACE CARD.

AutoCAD SHX Text

CRU-1A

AutoCAD SHX Text

ROOM 114

AutoCAD SHX Text

STYLE

AutoCAD SHX Text

FLOOR MOUNTED, INDOOR

AutoCAD SHX Text 5.0

AutoCAD SHX Text

TOTAL

AutoCAD SHX Text

MBH

AutoCAD SHX Text

SENSIBLE

AutoCAD SHX Text

MBH

AutoCAD SHX Text

CRU-1B

AutoCAD SHX Text

GRADE MOUNTED, OUTDOOR

AutoCAD SHX Text

CFM

AutoCAD SHX Text

REHEAT

AutoCAD SHX Text 0.5"

AutoCAD SHX Text

FAN

AutoCAD SHX Text

ESP

AutoCAD SHX Text

HUMIDIFIER

AutoCAD SHX Text

COND.

AutoCAD SHX Text

PUMP

AutoCAD SHX Text

EDB

AutoCAD SHX Text

LDB

AutoCAD SHX Text

AMBIENT

AutoCAD SHX Text

FLA

AutoCAD SHX Text

MOP

AutoCAD SHX Text

VOLTAGE

AutoCAD SHX Text

PHASE

AutoCAD SHX Text

BUILT-IN

AutoCAD SHX Text

LBS/HR

AutoCAD SHX Text

AutoCAD SHX Text 15.0

AutoCAD SHX Text

OUTSIDE

AutoCAD SHX Text

BASIS OF DESIGN LIEBERT MODELS VSO42DD DUAL COOL EVAPORATOR, MCM080E8 CONDENSER.

AutoCAD SHX Text

TOTAL

AutoCAD SHX Text

MBH

AutoCAD SHX Text

SENSIBLE

AutoCAD SHX Text

MBH

AutoCAD SHX Text

EDB

AutoCAD SHX Text

LDB

AutoCAD SHX Text

CHILLED WATER COIL

AutoCAD SHX Text

DX COIL

AutoCAD SHX Text 45/52

AutoCAD SHX Text

EWT/LWT

AutoCAD SHX Text

GPM

AutoCAD SHX Text

CHILLED WATER COIL

AutoCAD SHX Text

EXTEND NEW RL, RS, CHWS AND CHWR TO CONN. ON UNIT

AutoCAD SHX Text

CONN NEW 3/4" COND. TO

AutoCAD SHX Text

PUMPED DISCHARGE ON UNIT

AutoCAD SHX Text

EXTEND 2" CHWS & CHWR

AutoCAD SHX Text

BACK TO MECH. ROOM

AutoCAD SHX Text

EXTEND 3/4" COND. DRAIN

AutoCAD SHX Text

TO OUTSIDE

AutoCAD SHX Text

PROVIDE ACCESS PANEL FOR SECURITY BARS

AutoCAD SHX Text

ACT CEILING

AutoCAD SHX Text

SECURITY BARS, SEE

AutoCAD SHX Text

DETAIL

AutoCAD SHX Text

RETURN AIR GRILLE

AutoCAD SHX Text

SEE SCHEDULE

AutoCAD SHX Text

12" HIGH UNIT

AutoCAD SHX Text

FLOOR STAND

AutoCAD SHX Text

FILTER BOX SUPPLIED

AutoCAD SHX Text

WITH UNIT

AutoCAD SHX Text

MAINTAIN REQUIRED CLEARANCE

AutoCAD SHX Text

FROM WALL FOR FILTER

AutoCAD SHX Text

REPLACEMENT

AutoCAD SHX Text D

AutoCAD SHX Text

SECURITY BARS, SEE

AutoCAD SHX Text

DETAIL

AutoCAD SHX Text

MARK

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

RETURN REGISTER SCHEDULE

AutoCAD SHX Text DIMENSION WxH(IN)

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text R/1

AutoCAD SHX Text 48"x38"

AutoCAD SHX Text

ALUMINUM

AutoCAD SHX Text

SIDEWALL HEAVY DUTY RETURN GRILLE

AutoCAD SHX Text

BASIS OF DESIGN PRICE INDUSTRIES MODEL 99, 30° DEFLECTION.

AutoCAD SHX Text 3"x3"x1/4" STEEL ANGLE FRAME-SECURE TO WALL WITH 1/4" THRU BOLTS AT 12" ONCENTER AND MAXIMUM 6" FROM OUTSIDE OF ANGLE FRAME. LOCK NUTS SHALL BE PROVIDED ON SECURE SIDE.

AutoCAD SHX Text 1/2" VERTICAL STEEL BARS ATMAXIMUM 6" ON CENTER. WELD BOTH ENDS OF BARS TO STEEL ANGLE FRAME. WELD BARS AT ALL CONNECTIONS TO HORIZONTAL BARS

AutoCAD SHX Text 1/2" HORIZONTALSTEEL BARS AT MAXIMUM 6" ON CENTER. WELD BOTH ENDS OF BARS TO STEEL ANGLE FRAME. WELD BARS AT ALL CONNECTIONS TO VERTICAL BARS

AutoCAD SHX Text 1-1/2"x1-1/2"x16 GA. ANGLE (TYPICAL)

AutoCAD SHX Text

PROVIDE AIRTIGHT SEAL AT ALL DUCT CONNECTIONS

AutoCAD SHX Text

NEW DUCTWORK

AutoCAD SHX Text

%%USECURITY BARS DETAIL

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

PROVIDE 1/8" FLAT PLATE

AutoCAD SHX Text

ON OPPOSITE SIDE OF

AutoCAD SHX Text

WALL TO SECURE FRAME

AutoCAD SHX Text

EXIST'G METAL STUD WALL

AutoCAD SHX Text

EXIST'G SUBGRADE

AutoCAD SHX Text 8"

AutoCAD SHX Text 8" THICK LAYER 95% COMPACTION IN 4" LIFTS RIDOT RECLAIMED AND PROCESSED AGGREGATE BASE

AutoCAD SHX Text

REFER TO ARCH. PLAN

AutoCAD SHX Text

FOR FRAMED OPENING

AutoCAD SHX Text

DETAIL

O F

Y N

G C

O M

, R H

O D

H N

L U

N D

E R

S E

A W

A R

E C

E N

SHEET OF

CONTRACT NO.

NAVFAC DRAWING NO.

NUWC DRAWING NO.

SCALE:

SIZE: ANSI D

A P

P R

C H

E C

K E

D B

D E

N E

D B

D R

A W

N B

D A

S A

D A

SEAL

R E

S S

E S

C R

O N

D A

P P

AS NOTED

P A

A L

O R

L D

E M

B U

O O

K . B

O U

R . N

O N

A D

D E

D C

O O

K . B

O U

E-1

19-021A

AutoCAD SHX Text

PARTIAL FLOOR PLAN - ELECTRICAL DEMOLITION

AutoCAD SHX Text

SCALE: 1/4" =1'-0"

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text 114B

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

LRP14, 208V/3PH

AutoCAD SHX Text

EXIST'G CONDENSERS

AutoCAD SHX Text

%%UDEMOLITION NOTES

AutoCAD SHX Text

AutoCAD SHX Text EXISTING SURFACE MOUNTED LIGHT FIXTURE, LAMPS, AND HANGERS TO BE REMOVED, INCLUDING ALL RELATED APPURTENANCES ABOVE CEILING. THE CONTRACTOR SHALL REMOVE AND PROPERLY DISPOSE OF THE EXISTING RECESSED FLUORESCENT LIGHT FIXTURES (TYPICAL OF APPROX. 4) AND ASSOCIATED CONDUITS AND CONDUCTORS TO PANELBOARD LP1 IN ROOM 118, CIRCUIT NUMBERS AS INDICATED. THE LIGHT FIXTURES ARE SURFACE ON THE EXISTING GYPSUM CEILING AT 9'-6" AFF. THE LAMPS AND BALLASTS SHALL BE PACKAGED IN SUITABLE CARDBOARD BOXES, PROVIDED BY THE CONTRACTOR, AND CLEARLY LABELED. THE CONTRACTOR SHALL PROPERLY DISPOSE/RECYCLE OF THE BALLASTS AND THE LAMPS IN ACCORDANCE WITH ALL APPLICABLE STATE AND FEDERAL LAWS.

AutoCAD SHX Text

LRP14-4,6

AutoCAD SHX Text

LRP14-12,14

AutoCAD SHX Text

LRP14-8,10

AutoCAD SHX Text

LRP14-4,6

AutoCAD SHX Text

LRP14-8,10

AutoCAD SHX Text

LRP14-12,14

AutoCAD SHX Text

AutoCAD SHX Text a

AutoCAD SHX Text

DUCTLESS COOLING UNITS REMOVED(TYP. FOR 3) SEE MECH. PLANS

AutoCAD SHX Text REMOVE EXISTING DISCONNECT, WIRE AND CONDUIT BACK TO PANEL LRP14 SERVING EXISTING CEILING RECESSED DUCTLESS COOLING UNIT.

AutoCAD SHX Text

AutoCAD SHX Text REMOVE EXISTING DISCONNECT, WIRE AND CONDUIT BACK TO PANEL LRP14 SERVING EXISTING OUTSIDE WALL MOUNTED CONDENSING UNITS.

AutoCAD SHX Text

LP1-2

AutoCAD SHX Text

CONDENSING UNITS REMOVED(TYP. FOR 3) SEE MECH. PLANS

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

PP1

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

PP4

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

DP-2

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

DP-1

AutoCAD SHX Text

AutoCAD SHX Text EXISTING SMOKE DETECTOR TO REMAIN AND BE PROTECTED DURING CONSTRUCTION. RELOCATE AND MOUNT ON NEW CEILING SEE DRAWING E-2.

AutoCAD SHX Text Sa

AutoCAD SHX Text

AutoCAD SHX Text a

AutoCAD SHX Text

AutoCAD SHX Text a

AutoCAD SHX Text

AutoCAD SHX Text a

AutoCAD SHX Text EXISTING LIGHT SWITCH TO REMAIN, THE CONTRACTOR SHALL MODIFY THE EXISTING CONDUIT AND WIRING TO ACHIEVE NEW LIGHTING DESIGN ON DRAWING E-2.

AutoCAD SHX Text

AutoCAD SHX Text EXIST'G LIGHTING CIRCUIT ALSO SERVES ROOM 116 LIGHTING FIXTURES. COORDINATE POWER OUTAGE FOR LIGHTING REPLACEMENT WITH LAB 116

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

LP1

AutoCAD SHX Text EXISTING 30 AMP BREAKERS IN PANEL LRP14 SERVING EXIST'G COOLING UNITS SHALL REMAIN AND BECOME SPARES

O F

Y N

G C

O M

, R H

O D

H N

L U

N D

E R

S E

A W

A R

E C

E N

SHEET OF

CONTRACT NO.

NAVFAC DRAWING NO.

NUWC DRAWING NO.

SCALE:

SIZE: ANSI D

A P

P R

C H

E C

K E

D B

D E

N E

D B

D R

A W

N B

D A

S A

D A

SEAL

R E

S S

E S

C R

O N

D A

P P

AS NOTED

P A

A L

O R

L N

E W

W O

R K

B U

O O

K . B

O U

R . N

O N

A D

D E

D C

O O

K . B

O U

E-2

19-021A

AutoCAD SHX Text

PARTIAL FLOOR PLAN - ELECTRICAL NEW WORK

AutoCAD SHX Text

SCALE: 1/4" =1'-0"

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text 114B

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

EXIST'G CONDENSERS

AutoCAD SHX Text 1A

AutoCAD SHX Text

CRU

AutoCAD SHX Text

%%UCONSTRUCTION NOTES

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

PP1

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

PP4

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

DP-2

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

DP-1

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

LP1

AutoCAD SHX Text 1B

AutoCAD SHX Text

CRU

AutoCAD SHX Text

EXIST'G PANEL

AutoCAD SHX Text

LRP14, 208V/3PH

AutoCAD SHX Text

3P 30NF

AutoCAD SHX Text

3P 60NF

AutoCAD SHX Text

PP1-14,16,18

AutoCAD SHX Text

PP1-13,15,17

AutoCAD SHX Text a

AutoCAD SHX Text F1

AutoCAD SHX Text

AutoCAD SHX Text a

AutoCAD SHX Text F1

AutoCAD SHX Text

AutoCAD SHX Text a

AutoCAD SHX Text F1

AutoCAD SHX Text

AutoCAD SHX Text a

AutoCAD SHX Text F1

AutoCAD SHX Text

SPRINKLER HEAD(TYP.)

AutoCAD SHX Text

LP1-2

AutoCAD SHX Text Sa

AutoCAD SHX Text

AutoCAD SHX Text THE CONTRACTOR SHALL PROVIDE AND INSTALL NEW 277V 2'X2' RECESSED LED LIGHT FIXTURES, TYPE F1 (TYPICAL OF OF APPROX. 4) , AND ASSOCIATED CONDUIT AND CONDUCTORS , AND ASSOCIATED CONDUIT AND CONDUCTORS , AND ASSOCIATED CONDUIT AND CONDUCTORS CONDUCTORS (2-#12+#12 GND AWG CU THWN-2 IN 3/4" EMT, MC CABLE WHIP AT FIXTURE ENTRY) TO PANELBOARD LP1, CIRCUIT NUMBERS AS INDICATED. MOUNTED IN THE NEW SUSPENDED CEILING GRID PER MANUFACTURER'S SPECIFICATIONS. PROVIDE JACK CHAINS OR SUSPENSION WIRES AT EACH CORNER TO STRUCTURE ABOVE. DO NOT SUPPORT BY CEILING GRID. THE CONTRACTOR SHALL RE-USE THE FOLLOWING EXISTING SIEMENS TYPE BL BRANCH CIRCUIT BREAKERS IN PANELBOARD LP1 FOR POWER TO THE NEW LIGHT FIXTURES, CIRCUIT NUMBERS AS INDICATED.

AutoCAD SHX Text

AutoCAD SHX Text THE CONTRACTOR SHALL REUSE THE 277V 20A 2-WAY IVORY LIGHT SWITCH, AND ASSOCIATED CONDUIT AND CONDUCTORS CONDUIT AND CONDUCTORS (#12 CU THWN-2 IN 3/4" EMT), FOR SWITCHING THE NEW THWN-2 IN 3/4" EMT), FOR SWITCHING THE NEW SWITCHING THE NEW LED LIGHT FIXTURES AS INDICATED.

AutoCAD SHX Text

REINSTALL EXISTING SMOKE DETECTOR AT LOCATION SHOWN, AND

AutoCAD SHX Text

RECONNECT TO EXISTING FEEDS.

AutoCAD SHX Text

NEMA 4X 480V, 3 PH, 30 AMP NON FUSED DISCONNECT SWITCH.

AutoCAD SHX Text

NEMA 1 480V, 3 PH, 60 AMP NON FUSED DISCONNECT SWITCH.

AutoCAD SHX Text

CEILING DIFFUSER(TYP.)

AutoCAD SHX Text

3 #12 & #12 GND

AutoCAD SHX Text

IN 3/4" EMT

AutoCAD SHX Text

3 #8 & #10 GND

AutoCAD SHX Text

IN 1" EMT

AutoCAD SHX Text S

AutoCAD SHX Text

NEW DUCT SMOKE DETECTOR

AutoCAD SHX Text

PROVIDED AND WIRED BY

AutoCAD SHX Text

ELEC. CONTR. INSTALLED BY

AutoCAD SHX Text

HVAC CONTR.

O F

Y N

G C

O M

, R H

O D

H N

L U

N D

E R

S E

A W

A R

E C

E N

SHEET OF

CONTRACT NO.

NAVFAC DRAWING NO.

NUWC DRAWING NO.

SCALE:

SIZE: ANSI D

A P

P R

C H

E C

K E

D B

D E

N E

D B

D R

A W

N B

D A

S A

D A

SEAL

R E

S S

E S

C R

O N

D A

P P

AS NOTED

4/ X/

E N

D , N

S C

H E

D U

A L

B U

O O

19-021A

K . B

O U

R . N

O N

A D

D E

D C

O O

W2018-362-01

K . B

O U

E-3

4/ X/

AutoCAD SHX Text 1.

AutoCAD SHX Text 2.

AutoCAD SHX Text 3.

AutoCAD SHX Text 1.

AutoCAD SHX Text 2.

AutoCAD SHX Text 3.

AutoCAD SHX Text ELECTRICAL CONTRACTOR (E.C.) SHALL FURNISH AND INSTALL A NEW PULL/JUNCTION BOX AND DISCONNECT FOR EACH PIECE OF MECHANICAL EQUIPMENT NOTED. EXTERIOR BOX AND DISCONNECT SHALL BE STAINLESS STEEL AND SIZED TO SUIT THE EXISTING AND NEW EQUIPMENT WIRING . EQUIPMENT SHALL BE IN CONFORMANCE WITH THE NATIONAL ELECTRICAL CODE.

AutoCAD SHX Text ELECTRICAL CONTRACTOR (E.C.) SHALL VISIT THE SITE PRIOR TO THE BID TO FAMILIARIZE THEMSELVES WITH THE EXISTING BUILDING CONDITIONS WHICH AFFECT THE COSTS FOR THE WORK. DIFFERING FIELD CONDITIONS DUE TO A LACK OF EXISTING SITE CONDITIONS INFORMATION IS NOT ELIGIBLE FOR ADDITIONAL COMPENSATION.

AutoCAD SHX Text E.C. SHALL FIELD MEASURE ALL EXISTING WIRING PHYSICAL LOCATIONS IN ORDER TO SHALL FIELD MEASURE ALL EXISTING WIRING PHYSICAL LOCATIONS IN ORDER TO MODIFY AS REQUIRED FOR THE NEW MECHANICAL EQUIPMENT LOCATION AND WIRING. E.C. SHALL PROVIDE ASSISTANCE TO THE MECHANICAL CONTRACTOR ON LOCATIONS OF THE NEW EQUIPMENT IN ORDER TO PROVIDE PROPER ELECTRICAL WORKING CLEARANCES.

AutoCAD SHX Text E.C. IN ACCORDANCE WITH THE CONSTRUCTION SCHEDULE SHALL DISCONNECT AND IN ACCORDANCE WITH THE CONSTRUCTION SCHEDULE SHALL DISCONNECT AND SELECTIVELY DEMOLISH THE EXISTING POWER WIRING. WORK INCLUDES TAGGING ALL EXISTING WIRING TO BE RE-USED INCLUDING PROVIDING PROPER EQUIPMENT LOCK-OUTS AS REQUIRED BY OSHA AND EM-385.

AutoCAD SHX Text E.C. SHALL COORDINATE ALL NEW ELECTRICAL WIRING WITH THE "AS-SUPPLIED" SHALL COORDINATE ALL NEW ELECTRICAL WIRING WITH THE "AS-SUPPLIED" EQUIPMENT. NO ROUGH WIRING SHALL BE STARTED UNTIL THE NEW EQUIPMENT FIELD INTERCONNECTION WIRING DIAGRAMS ARE COMPLETED TO ALLOW THE E.C. TO DETERMINE THE NECESSARY POWER, AND INTERLOCKING WIRING. E.C. SHALL PREPARE AND SUBMIT INTERCONNECTION FIELD WIRING DIAGRAMS FOR THE NEW SYSTEM. NEW DIAGRAMS SHALL INDICATE THE EXISTING FIELD WIRING AND THE NECESSARY WIRING REVISIONS. ALL NEW WIRING SHALL BE RUN IN CONDUIT.

AutoCAD SHX Text E.C. SHALL MAKE ALL FINAL WIRING TERMINATIONS TO THE NEW EQUIPMENT UNDER THE DIRECT SUPERVISION/REVIEW/APPROVAL OF THE MANUF. REPRESENTATIVE. E.C. SHALL TAKE ALL ELECTRICAL MEASUREMENTS AS REQUESTED BY THE REPRESENTATIVE DURING EQUIPMENT START-UP AND TESTING.

AutoCAD SHX Text

%%UELECTRICAL DEMOLITION NOTES

AutoCAD SHX Text

%%UELECTRICAL CONSTRUCTION NOTES

AutoCAD SHX Text 1.

AutoCAD SHX Text 2.

AutoCAD SHX Text 3.

AutoCAD SHX Text 4.

AutoCAD SHX Text 5.

AutoCAD SHX Text ALL ELECTRICAL WORK SHALL BE DONE IN ACCORDANCE WITH THE NATIONAL ELECTRICAL AND NATIONAL ELECTRONIC CODE INCLUDING GROUNDING OF THE NEW EQUIPMENT AND WIRING.

AutoCAD SHX Text ALL ELECTRICAL MATERIAL AND INSTALLATION SHALL BE NEW AND FURNISHED/INSTALLED IN ACCORDANCE WITH THE CONTRACT DRAWINGS AND SPECIFICATIONS.

AutoCAD SHX Text THE PROPOSED LOCATION OF THE NEW EQUIPMENT AND WIRING IS DIAGRAMATIC ONLY. ELECTRICAL CONTRACTOR SHALL MAKE FIELD REVISIONS AS NECESSARY TO SUIT THE EXISTING FIELD CONDITIONS AND THE "AS-SUPPLIED" MECHANICAL EQUIPMENT.

AutoCAD SHX Text NO NEW ELECTRICAL WORK SHALL COMMENCE UNTIL THE EXISTING FIELD SURVEYS ARE COMPLETED AND THE NEW EQUIPMENTS WIRING REQUIREMENTS ARE COORDINATED. PROPER COORDINATION SHALL BE SUBSTANTIATED BY THE SUBMITTAL/APPROVAL OF THE EXISTING AND NEW FIELD WIRING INTERCONNECTION WIRING DIAGRAMS BY THE E.C.

AutoCAD SHX Text ALL NEW/REVISED POWER SUPPLIES AND WIRING SHALL BE IN STRICT ACCORDANCE WITH THE EQUIPMENT MANUFACTURER REQUIREMENTS. THE E.C.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.