N6660417Q0654_ATTACHMENT_1_GOVERNMENT_MINIMUM_REQUIREMENTS.pdf

ATTACHMENT # 1 – N66604-17-Q-0654

Government Minimum Requirements

0001; Compute Node Hardware; QTY 13:

7x24 Next Business Day Onsite Service, 3 Years Standard 3-Year Disk Retention Sliding Tray in front of chassis for easy system identification to include system serial number Modular, removable and tool less architecture for easy access LCD Panel on front of chassis which displays System ID status information and system error messages Dual Port 10Gb Direct Attach/SFP+ Network Adapter- Full line rate must equal 10GbE over each port Systems management controller for early notification to prevent server failures and secure access to remote servers DVD ROM SATA internal On board FIPS Compliant TPM 1.2v2 (Trusted Platform Module) Minimum 4x 1GB RJ-45 Ethernet interfaces Minimum 2x USB 2.0 on front of chassis Minimum 2x USB 2.0 or higher ports on rear of chassis Minimum 2 VGA port interfaces one on both front and back of chassis Fixed and hot swappable drive support for both SSD and SATA Compact 1u Form factor with rail mounting hardware Support for Red Hat Enterprise Linux CPU- Dual Fourteen Core Intel XEON E5-2690 V4 2.6GHz 35MB Cache 135 W (Broadwell) –

BRAND NAME ONLY, SEE BRAND NAME JUSTIFICATION, ATTACHMENT # 2.

Support for 2 PCI-e 3.0 expansion slot running at 16x Support for up to 384GB 2400MT/s DDR4, ECC memory Support for up to 8 2.5” hard drives Support for redundant power supplies Energy efficient 80% Power Supply or greater System firmware and drivers must be made available by the vendor via http or https and not solely FTP 384GB DDR4-2400MT/s ECC RAM (32GBx12) 1 U form Factor FIPS Compliant TPM 1.2V2 or greater 200GB or greater 2.5” Solid State SATA Disk Mix use MLC (Multi Level Cell) 6Gpbs Sliding rail mounting hardware to support 1u compute node

0002; LTO6 Tape Hardware; QTY 1:

7x24 Next Business Day Onsite Service, 3 Years LTO6 Drive capable of 6Gb/s SAS interface Native 2.5TB (Native storage) 6Gb 2Meter SAS Cable

0003; Network Switch; QTY 1:

4-hour 7x24 Onsite Service, 3 Year 7x24 Hardware/software Tech support, 3 Year Support for48 x 10GbE SFP+ ports & 6 x 40GbE QSFP+ ports Switch I/O Bandwidth minimum 1.44Tbps (Full Duplex) Switch CPU memory minimum 2GB Support for redundant power supply 1U form factor VLAN Support Link aggregation to support 40GbE Out of band management port Switch must be certified compliant by Common Criteria for Information Technology Security

Evaluation http://www.commoncriteriaportal.org/products/ 14 SFP+ to SFP+, 10GbE, Copper Twinax Direct Attach Cables (3Meters) 15 Network Transceiver, SFP 1000Base-T for RJ45 copper type connections 1 QSFP+ 40GbE to 4x10GbE SFP+ passive copper breakout cable (3 Meters) Redundant Power supply

0004; Compute Node Disk Farm Hardware; QTY 1:

7x24 Next Business Day Onsite Service, 5 Years Standard 5 Year Disk Retention Sliding Tray in front of chassis for easy system identification to include system serial number Modular, removable and tool less architecture for easy access LCD Panel on front of chassis which displays System ID status information and system error messages Support for Dual Port 40Gb Direct Attach/QSFP Network Adapter Systems management controller for early notification to prevent server failures and secure access to remote servers DVD ROM External or internal On board FIPS Compliant TPM 1.2v2 (Trusted Platform Module) Support for network daughter card to include 2x10Gb DA/SFP+ and 2x1Gb connections Minimum 2x USB 2.0 on front of chassis Minimum 2x USB 2.0 or higher ports on rear of chassis Minimum 2 VGA port interfaces one on both front and back of chassis Fixed and hot swappable drive support for Flash PCI-e SSDs, SSD, SAS and SATA Compact 2u Form factor with rail mounting hardware Support for dual Intel XEON E5-2667 V4 3.2GHz architecture Support for 6 PCI-e 3.0 expansion slot running at 16x Support for up to 1.5TB 2400MT/s DDR4, ECC memory Support for up to 24 hard drives Support for up to 4 flash PCI-e SSDs or NVMe drives at 6.4Tb

Support for SAS 12Gbps HBA Controllers Support for configuring hard drives to be assigned to each RAID (Redundant Array of Inexpensive

Disks) Controller (not predetermined, must be configurable so drives can be modified to allow for multiple split zones)

Red Hat Enterprise Linux Server 1-2socket, 5yr Premium Subscription - BRAND NAME ONLY, SEE

BRAND NAME JUSTIFICATION, ATTACHMENT # 2.

Support for Dual RAID Controllers 2GB or more of Non Volatile memory Redundant power supplies Dual Port 10Gb Direct Attach(DA)/SFP+ & 2x1Gb Network Daughter card Adapter Dual Port 40Gb DA/QSFP+ server Ethernet network adapter 768GB DDR4-2400MT/s ECC RAM (32GBx24) 12 Gbps SAS Host Bus Adapter (HBA) supported by Red Hat Enterprise Linux 6.x or greater 2 U form Factor FIPS Compliant TPM 1.2V2 or greater Quantity 2 - 800GB or greater 2.5” Solid State SAS MLC (Multi Level Cell) 12Gbps 2.5” Disk Mix use

Hot Swappable Quantity 18 – 3.84TB or greater 2.5” Solid State SAS Read Intensive MLC (Multi Level Cell) 12Gbps

2.5” Disk Hot Swappable Load Balancing Raid Controller (2GB Cache minimum) capable of 12Gbps SAS/SATA and SSDs supporting RAID levels 0,1,5,6,50,60 and NV Cache, RAID Controller must support multiple split zones

Sliding rail hardware with cable arm to support 2u Disk farm compute node Energy efficient Power Supply Support for LTO-6 External Tape Backup System firmware and drivers must be made available by the vendor via http or https and not solely FTP

0005; Power Distribution Unit; QTY 2:

3 Year Warranty minimum 2 year Warranty on battery Single phase use only Energy Star Compliant Capacity 6.0 KWatts/6.0kVA 208V LCD graphics display Serial connectivity Temperature-compensated battery charging to increase battery life LED status indicators Network manageable Automatic internal bypass Rack mountable 4U footprint Hot-swappable batteries Support for additional runtimes by adding battery capacity as necessary User-replaceable batteries Automatic self-test Audible alarms for immediate notification of UPS power conditions Firmware must be upgradeable Resettable circuit breaker to localize power overloads Support for environmental monitoring to include temperature & humidity Output connections to include 4 - National Electrical Manufacturer Association (NEMA) L6-20, 1- L6-

30 and Hardwire 3-wire

0006: Accessories: Keyboard, Monitor, Mouse; QTY 1

18.5in 1U monitor Rack mount LED integrated keyboard , monitor and mouse (KMM) VGA support & resolution @ 1440x900 Mounting bracket hardware must be included 3year maintenance on keyboard, monitor and mouse.

0007: Metered Power Distribution Unit; QTY 8

Metered Power Distribution Units (PDU) with LED display, Input connector type 20A NEMA L6-20 connector 0U form factor Circuit protection to include circuit breaker