Government Drawings.pdf

FILE DATE: 2018/07/24 FILE NAME: 235283_REV-B_CART MAIN ROLLER ASSEMBLY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

SHDWG. NO. 1

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235283

SHEET 1 OF 2

XXXXX

DR-XXXXXX

COGNIZANT CODE

0243599

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN APR2018

0235122

D

THIRD ANGLE PROJECTION

CART MAIN ROLLER

ASSEMBLY

0235283

B.WEIDEMIER APR2018

TPICKERING 10MAY2018

B REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT

OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL TECHNOLOGY,

2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO COMMANDER, SPACE

AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

NOTES:

1. WEIGHT: 167 LBS

2. MCMASTER-CAR PART NUMBERS PROVIDED

INITIAL DRAWING APR2018

1 1 3A054 98355A240 COTTER PIN, 3/16 DIAMETER STAINLESS STEEL PIN, 316 7

1 3A054 90499A847 HEX NUT, 1-8 UNC STEEL, GRADE 8 6

1 3A054 92147A038 SPLIT LOCK WASHER, 1" INNER DIAMETER STAINLESS STEEL WASHER, 316 5

1 55910 0235251 WASHER, 1" INNER DIAMETER STAINLESS STEEL WASHER, 316 4

2 55910 0235252 SHAFT RING STAINLESS STEEL RING, 316 3

1 55910 0235254 MAIN ROLLER 416 OR 316 STAINLESS STEEL 2

1 55910 0235285 MAIN ROLLER SHAFT 416 OR 316 STAINLESS STEEL 1

QTY

REQ'D

CAGE

CODE

PART OR IDENTIFYING NUMBER DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

B JUL2018 KHANSENREVISED MATERIALS FOR OUTER ROLLER AND SHAFT

FILE DATE: 2018/07/24 FILE NAME: 235283_REV-B_CART MAIN ROLLER ASSEMBLY.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235283

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235283

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

EXPLODED VIEW

INITIAL DRAWING MAR 2017

REVISED MATERIALS FOR OUTER ROLLER AND SHAFT JUL2018 KHANSENB

FILE DATE: 2018/07/24 FILE NAME: 235254_REV-B_MAIN ROLLER BUSHING ASSEMBLY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235254

SHEET 1 OF 2

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235283

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN APR2018

0235122

D

THIRD ANGLE PROJECTION

MAIN ROLLER BUSHING

ASSEMBLY

0235254

B.WEIDEMEIER APR2018

TPICKERING 10MAY2018

B REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT

OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL TECHNOLOGY,

2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO COMMANDER, SPACE

AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

NOTES:

1. BUSHINGS ARE PRESS FIT INTO STEEL ROLLER

THROUGH INTERFERENCE FIT.

2. WEIGHT: 149 LBS

1 55910 0235284_REV-A_ MAIN ROLLER OUTER 416 OR 316 STAINLESS STEEL 2

2 55910 0235253 MAIN ROLLER BUSHING 932 BEARING BRONZE 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING NUMBER DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND NO.

INITIAL DRAWING APR2018

REVISED MATERIAL SPEC ON MAIN ROLLERB JUL2018 KHANSEN

FILE DATE: 2018/07/24 FILE NAME: 235254_REV-B_MAIN ROLLER BUSHING ASSEMBLY.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235254

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235254

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

EXPLODED VIEW

B REVISED MATERIAL SPEC ON MAIN ROLLER JUL2018 KHANSEN

FILE DATE: 2018/07/24 FILE NAME: 235284_REV-B_CART MAIN ROLLER OUTER.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235284

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235254

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 3/4

KHANSEN APR2018

0235122

D

THIRD ANGLE PROJECTION

CART MAIN ROLLER OUTER

0235284

B.WEIDEMEIER APR2018

TPICKERING 10MAY2018

B REV

1 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

FOR REFERENCE ONLY

NOTES:

1. MATERIAL: 416 STAINLESS STEEL(PREFERRED) OR 316, 316L STAINLESS STEEL.

VENDOR TO SPECIFY MATERIAL IN QUOTE, BASED ON AVAILABILITY

2. FINISH: NITRIC ACID PASSIVATION

3. WEIGHT: 145 LBS

O 8.00 +.01 -.03

O 4.502X

O 3.1956

R .192X

R .192X

14.75

INITIAL DRAWING

1.62

13.12

3.1964 THRU

-- MAR 27, 2018

A- CHANGED MATERIAL SPEC JUL2018 KHANSEN

B CHANGED MATERIAL SPEC JUL2018 KHANSEN

FILE DATE: 2018/05/08 FILE NAME: 235253_-_MAIN ROLLER BUSHING.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235253

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235254

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1.5/1

KHANSEN APR2018

0235122

D

THIRD ANGLE PROJECTION

MAIN ROLLER BUSHING

0235253

B.WEIDEMEIER APR2018

TPICKERING 10MAY2018

- REV

1 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

FOR REFERENCE ONLY

NOTES:

1. MATERIAL: 932 BEARING BRONZE

2. WEIGHT: 2 LBS

INITIAL DRAWING

O 3.000 +.010 -.000

7.375

O 3.1971 3.1966

-- MARCH 27, 2017

FILE DATE: 2018/07/24 FILE NAME: 235285_REV-B_CART MAIN ROLLER SHAFT.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235285

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235283

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN APR2018

0235122

D

THIRD ANGLE PROJECTION

CART MAIN ROLLER SHAFT

0235285

B.WEIDEMEIER APR2018

TPICKERING 10MAY2018

B REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

FOR REFERENCE ONLY

NOTES:

1. MATERIAL: 416 (PREFERRED) OR 316/316L STAINLESS STEEL

2. FINISH: NITRIC ACID PASSIVATION

3. WEIGHT: 38 LBS

INITIAL DRAWING APR2018

.50

18.69

O .203 u.010

O 4.00

O 2.980 +.000 -.010

.500 u.010

1-8 UNC THREAD

.125 u.010

2.062 u.010

O .624 u.010

.188

REVISED MATERIAL SPEC JUL2018 KHANSENA

REVISED MATERIAL SPEC JUL2018B KHANSEN

FILE DATE: 2018/05/10 FILE NAME: 235251_-_SHAFT WASHER.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235251

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235283

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 2/1

KHANSEN APR2018

0235122

D

THIRD ANGLE PROJECTION

SHAFT WASHER

0235251

BWEIDEMEIER 2018/05/02

TPICKERING 10MAY2018

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

FOR REFERENCE ONLY

NOTES:

1. MATERIAL: STAINLESS STEEL, 316

2. WEIGHT: 1.0 LB

O 4.069 u.015

.25

O 1.031 u.010

FILE DATE: 2018/05/04 FILE NAME: 235252_-_SHAFT RING.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235252

SHEET 1 OF 1

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235283

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN APR2018

0235122

D

THIRD ANGLE PROJECTION

SHAFT RING

0235252

B.WEIDEMEIER APR2018

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, 2014/02/10; OTHER REQUESTS SHALL BE REFERRED TO

COMMANDER, SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN DIEGO, CA

92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

FOR REFERENCE ONLY

NOTES:

1. MATERIAL: STAINLESS STEEL, 316

2. WEIGHT: LESS THAN 1 LB

O 3.000 +.015 -.000

O 4.000 u.015

.25