A1.5 DRAWING 2.pdf

55910 D SIZE - ASME Y14.100, REV 6-2004

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1SBR SPPT TREE

SHEET 1

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D SBR SPPT TREE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -2009/03/03--

REV

0235170

SNUBBER SPPT BRACE ASSY

0235153 0235171 0235177

SCREW WASHER ASSY

0235151 0235174 0235149

0235147 0235152 0235175 0235176

0235147 0235172 0235175 0235176

FILE DATE: 2017/08/02 FILE NAME: 235170_-_SNBR RAIL SPPT BRACE ASSY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

SHDWG. NO. 1

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235170

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

XXXXX

DR-XXXXXX

COGNIZANT CODE

TRANSLATOR

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 20JUL2017

0235122

D

THIRD ANGLE PROJECTION

0235170 kyle 2017/07/20

TPICKERING 01AUG2017

2017/08/02.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

SNUBBER RAIL SPPT

BRACE ASSY

20JUL2017INITIAL RELEASE

A

DETAIL A

3/8

1/42X

1/42X

2 3A054 0235177 - 1"-12 UNC SHCS AND WASHER SEE DWG 0235177 3

1 55910 235171 - RAIL SUPPORT END SLOTTED 50 KSI STEEL 2

1 55910 0235153 - SNUBBER RAIL SUPPORT UPPER ASSEMBLY STEEL, STRUCTURAL 50 KSI 1

QTY

REQ'D

CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

NOTES:

1. NO FINISH UNTIL FIT CHECK WITH OTHER HARDHARE. CONDUCTED AT SSC PACIFIC.

2. FINAL WELDING ON THIS ASSEMBLY WILL BE DONE AFTER FIT CHECK AT SSC PACIFIC. TACKING THE ASSEMBLY IN PLACE FOR FINAL WELDING WILL BE DONE DURING THE FIT CHECK. FINAL WELDING MAY BE DONE AT SSC PACIFIC OR OFFSITE.

3. AFTER TACKING THE ASSEMBLY IN PLACE, THE END SLOTTED ASSEMBLY WILL BE WELDED AT THE JOINT

4. AFTER WELDS IN NOTE 3, THE SOCKET HEAD SCREWS WILL BE REMOVED AMD THE SLOTS WILL BE PLUG WELDED.

5. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED.

WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS WITH NO LEAKS FOR WATER TO PENETRATE BETWEEN SURFACES.

6. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

7. WEIGHT OF ASSEMBLY 1,210 LBS

8. ASSEMBLY WILL BE SHIPPED TO PAINTING FACILITY AFTER FINAL WELDS ARE COMPLETE.

9. FINISH:

SAND BLAST STRUCTURE AND APPLY ONE COAT OF EPOXY POLYAMIDE PRIMER. FOLLOW WITH ONE COAT EPOXY POLYAMIDE PAINT (HAZE GRAY).

MAY USE AN EQUVALENT SUBSTITUTE IF APPROVED BY COGNIZANT ENGINEERING POC.

FILE DATE: 2017/08/01 FILE NAME: 235153_-_SBR RAIL SPPT UPPER ASSY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235153

SHEET 1 OF 2

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235170

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 25JUL2017

0235122

D

THIRD ANGLE PROJECTION

0235153 merhoffk 2017/04/21

TPICKERING 01AUG2017

2017/08/01.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

SNUBBER RAIL SPPT UPPER

ASSEMBLY

25JUL2017INITIAL RELEASE

1 55910 0235174 - RAIL SUPPORT LIFT EYE STEEL, STRUCTURAL 50 KSI 3

1 55910 0235151 - RAIL SUPPORT END ASSEMBLY STEEL, STRUCTURAL 50 KSI 2

1 55910 0235149 - MAIN SNUBBER END SUPPORT STEEL, STRUCTURAL 50 KSI 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND NO.

NOTES:

1. MATERIALS: 50 KSI STEEL PLATE; ASTM A500 GRADE B (46KSI YEILD) OR ASTM A501 GRADE B (50KSI YEILD)

2. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED.

WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS WITH NO LEAKS FOR WATER TO PENETRATE BETWEEN SURFACES.

3. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

4. WEIGHT OF ASSEMBLY 1,100 LBS

5. NO FINISH:

FILE DATE: 2017/08/01 FILE NAME: 235153_-_SBR RAIL SPPT UPPER ASSY.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235153

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235153

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

1/4

168.625 u .125

306.625 u .125

3/8

4.00

4X 1/4

FILE DATE: 2017/08/08 FILE NAME: 235149_-_MAIN SBR END SPPT.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235149

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND

DOD CONTRACTORS ONLY; CRITICAL TECHNOLOGY;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA

92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION

OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235153

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 7JUN2017

0235122

D

THIRD ANGLE PROJECTION

0235149 merhoffk 2017/04/21

TPICKERING 01AUG2017

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

MAIN SNUBBER END

SUPPORT

25JUL2017INITIAL RELEASE

316.62 u .125

4.50

4.50

NOTES:

1. MATERIAL: 9" X 9" STRUCTURAL STEEL TUBE, ASTM A500 GRADE B (46KSI YEILD) OR ASTM A501 GRADE B (50KSI YEILD)

2. WEIGHT 1,000 LBS

3. FINISH: NONE

A

A

2X 1-12 UNF THRU

9.00

STK

9.00

STK

.31

STK

SECTION A-A

FILE DATE: 2017/08/01 FILE NAME: 235151_-_RAIL SPPT END ASSY.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235151

SHEET 1 OF 2

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235154

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 7JUN2017

0235122

D

THIRD ANGLE PROJECTION

0235151 merhoffk 2017/04/19

TPICKERING 01AUG2017

2017/08/01.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

RAIL SUPPORT END

ASSEMBLY

7JUN2017INITIAL RELEASE

0235153

4 55910 0235175 - RAIL SUPPORT END GUSSET STEEL, STRUCTURAL 50 KSI 4

2 55910 0235176 - CLEVIS ROUND 2IN DIA STEEL, STRUCTURAL 50 KSI 3

1 55910 0235152 - RAIL SUPPORT TUBE STEEL, STRUCTURAL 50 KSI 2

1 55910 0235147 - RAIL SUPPORT END PLATE STEEL, STRUCTURAL 50 KSI 1

QTY REQ'D CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

NOTES:

1. MATERIALS: 50KSI STEEL; ASTM A500 GRADE B (46KSI YEILD) OR ASTM A501 GRADE B (50KSI YEILD)

2. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED.

WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS WITH NO LEAKS FOR WATER TO PENETRATE BETWEEN SURFACES.

3. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

4. WEIGHT OF ASSEMBLY 105 LBS

5. NO FINISH

FILE DATE: 2017/08/01 FILE NAME: 235151_-_RAIL SPPT END ASSY.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235151

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235151

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

7JUN2017INITIAL RELEASE

3/8

1/4 X4

X2 1/4

HOLES TO BE CONCENTRIC WITHIN .020 IN

6.00

1.692X 2.752X

8.752X

2.00

FILE DATE: 2018/02/07 FILE NAME: 235174_-_RAIL SPPT LIFT EYE.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235174

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235154

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 20JUL2017

0235122

D

THIRD ANGLE PROJECTION

0235174 merhoffk 2017/04/21

TPICKERING 01AUG2017

2018/02/07.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

RAIL SUPPORT LIFT EYE

INITIAL RELEASE 20JUL2017

0235153

6.00

1.50

2.50

O 1.00

R 1.50

.50

1.00 STOCK

4.00

48°

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 1 IN THICK NOMINAL

2. FINISH: NONE

REFERENCE ONLY

FILE DATE: 2018/05/02 FILE NAME: 235147_-_ RAIL SPPT END PLATE.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235147

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT

WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT

IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C.

SEC. 2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE

EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235151

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 7JUN2017

0235122

D

THIRD ANGLE PROJECTION

0235147 merhoffk 2017/04/21

TPICKERING 01AUG2017

2018/05/02.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

RAIL SUPPORT END PLATE

7JUN2017INITIAL RELEASE

0235171

12.00

12.00

.75 STOCK

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, .75 INCH THICK NOMINAL

2. WEIGHT 31 LBS

3. FINISH: NONE

FILE DATE: 2017/08/01 FILE NAME: 235152_-_RAIL OUTER SPPT TUBE.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235152

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER REQUESTS SHALL BE

REFERRED TO COMMANDING OFFICER, SPACE AND NAVAL WARFARE

SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT

WILL PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235151

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 7JUN2017

0235122

D

THIRD ANGLE PROJECTION

0235152 merhoffk 2017/04/21

TPICKERING 01AUG2017

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

RAIL OUTER SUPPORT TUBE

23JUL2017INITIAL RELAEASE

10.00

.50

5.50

10.00 STOCK

10.00 STOCK

.375 STOCK

NOTES:

1. MATERIAL: 10X10X0.375 WALL STRUCTURAL STEEL TUBE, ASTM A500 GRADE B (46KSI YEILD) OR ASTM A501 GRADE B (50KSI YEILD)

2. WEIGHT 39.5 LBS

3. FINISH: NONE

R .2508X

REFERENCE ONLY

2.50

5.00

CUT SLOT THRU ON EACH FACE

FILE DATE: 2017/08/01 FILE NAME: 235175_-_RAIL SPPT END GUSSET.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1235175

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235171

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 25JUL2017

0235122

D

THIRD ANGLE PROJECTION

235175 merhoffk 2017/04/20

TPICKERING 01AUG2017

2017/08/01.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

RAIL SUPPORT END GUSSET

25JUL2017INITIAL RELEASE

0235151

4.00

1.75

.50

.50 STOCK

2.00

.25

.50

45°

67°

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, .5 INCH THICK NOMINAL

2. WEIGHT 0.75 LBS

3. FINISH: NONE

FILE DATE: 2017/08/02 FILE NAME: 235176_1_ CLEVIS ROUND 2IN DIA .dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235176

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

56420

COGNIZANT CODE125

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D

THIRD ANGLE PROJECTION

0235176

J. CALDWELL 13APR2017

2017/08/02.

REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

02351220235024

CLEVIS, ROUND 2 IN

DIAMETER

- INITIAL RELEASE 13APR2017

KHANSEN 20JUN2017

TPICKERING 24JUN2017

WEIGHT: 15.1 LB

B. WIEDEMEIER 02MAY2017

1 UPDATED NOTES, ADJUSTED FONTS 03MAY2017

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .015 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .015 MAX

SURFACE ROUGHNESS

3D VIEW - REF ONLY

SCALE 1:1

1.0 (STK)

8.62 u .19

81°2X (REF)

4.75

R 3.50 u .19

O 2.000

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50KSI OR STRONGER, 1 INCH THICK.

2. WEIGHT: 15.1 LBS.

3. FINISH: NONE.

+.015 -.001

4.31 u .19

FILE DATE: 2017/08/01 FILE NAME: 235171_-_RAIL SPPT BRACE END SLOTTED.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235171

SHEET 1 OF 2

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE

EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE

22, U.S.C. SEC. 2751 ET SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATORS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE

CRIMINAL PENALTIES.

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235171

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 20JUL2017

0235122

D

THIRD ANGLE PROJECTION

0235171 kyle 2017/07/20

TPICKERING 01AUG2017

2017/08/01.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

RAIL SUPPORT END

SLOTTED

20JUL2017INITIAL RELEASE

0235173

4 55910 0235175 - RAIL SUPPORT END GUSSET STEEL, STRUCTURAL 50 KSI 4

2 55910 0235176 - CLEVIS ROUND 2IN DIA STEEL, STRUCTURAL 50 KSI 3

1 55910 0235172 - RAIL OUTER TUBE-SLOTTED STEEL, STRUCTURAL 50 KSI 2

1 55910 0235147 - RAIL SUPPORT END PLATE STEEL, STRUCTURAL 50 KSI 1

QTY

REQ'D

CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.

NOTES:

1. MATERIALS: 50 KSI STEEL; ASTM A500 GRADE B (46KSI YEILD) OR ASTM A501 GRADE B (50KSI YEILD) STEEL SQUARE TUBE

2. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED.

WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS WITH NO LEAKS FOR WATER TO PENETRATE BETWEEN SURFACES.

3. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

4. WEIGHT OF ASSEMBLY 103 LBS

5. NO FINISH:

FILE DATE: 2017/08/01 FILE NAME: 235171_-_RAIL SPPT BRACE END SLOTTED.dft55910 D SIZE - ASME Y14.100, REV B, 4-2012

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235171

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0235171

DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

3/8

X2 1/4

HOLES TO BE CONCENTRIC WITHIN .020 IN

2.00 6.00

2.752X

8.752X

1.692X

1/4 4X

FILE DATE: 2017/08/01 FILE NAME: 235172_-_RAIL OUTER TUBE-SLOTTED.dft55910 D SIZE - ASME Y14.100, REV C, 9-2013

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1235172

SHEET 1 OF 1

DISTRIBUTION STATEMENT D. DISTRIBUTION AUTHORIZED TO DOD AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY; OTHER

REQUESTS SHALL BE REFERRED TO COMMANDING OFFICER, SPACE AND

NAVAL WARFARE SYSTEMS CENTER PACIFIC, SAN DIEGO, CA 92152-5001

DESTRUCTION NOTICE - DESTROY BY ANY METHOD THAT WILL PREVENT

DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC.

2751 ET SEQ.) OR EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

XXXXX

DR-XXXXXX

COGNIZANT CODE

0235171

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN

ACCORDANCE WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER PACIFIC

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

KHANSEN 23JUL2017

0235122

D

THIRD ANGLE PROJECTION

235172 merhoffk 2017/04/21

TPICKERING 01AUG2017

2017/08/01.

- REV

12 SH REVISION

STATUS DESCRIPTION APPROVEDDATEREVZONE

REVISION HISTORY

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL ONLY BE

INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

Systems Center

PACIFIC

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .03 MAX

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±2°

FILLETS .03 MAX

SURFACE ROUGHNESS

RAIL OUTER TUBE-SLOTTED

23JUL2017INITIAL RELEASE

R .562

1.12

4.44

3.50

5.00

2.00

NOTES:

1. MATERIAL: 10X0X0.375 WALL STRUCTURAL STEEL TUBE, ASTM A500 GRADE B (46KSI YEILD) OR ASTM A501 GRADE B (50KSI YEILD)

2. WEIGHT 38 LBS

3. FINISH: NONE

.50

4.00

R .25

5.002.50

MACHINED SLOT REPEATED 4X

MACHINED SLOT REPEATED 2X

55910 D SIZE - ASME Y14.100, REV 6-200

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10235177

SHEET 1 OF 1

56410

COGNIZANT CODE

0235170

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

1-12 SOCKET HEAD CAP

SCREW W/ FENDER WASHER

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -18JUL2017--

REV

K.HANSEN 18JUL2017

-0235177

KHANSEN

TPICKERING 01AUG2017

18JUL2017

0235173

NOTES:

1. 1-12 SOCKET HEAD CAP SCREW W/ FENDER WASHER

2. MCMASTER NUMBERS PROVIDED

1 55910 91117A250 - STEEL OVERSIZED FLAT WASHER ZINC-PLATED STEEL 2

1 55910 90044A270 - ALLOY STEEL SOCKET HEAD CAP SCREW BLACK-OXIDE ALLOY STEEL 1

QTY

REQ'D

CAGE

CODE

PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND

NO.