A1.5 DRAWING 1.pdf

55910 D SIZE - ASME Y14.100, REV 6-2004

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1RAIL-TOWER TREE

SHEET 1

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D RAIL-TOWER TREE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -2009/03/03--

REV

0243560

RAIL-TOWER SPPT ASSY

0243561

RAIL-TOWER SPPT

UPPER ASSY

0243562

RAIL-TOWER SPPT

LOWER ASSY

0243573

SCREW WASHER ASSY

0243563

RAIL-TOWER SPPT

UPPER ASSY

MAIN TUBE

0243564

RAIL-TOWER SPPT

UPPER ASSY

CAP PLATE

0243565

RAIL-TOWER SPPT

CLEVIS PLATE

0243566

RAIL-TOWER SPPT

UPPER ASSY

SWVL MNT

0243567

RAIL-TOWER SPPT

LOWER ASSY

FRONT

0243568

RAIL-TOWER SPPT

LOWER ASSY

BACK

0243569

RAIL-TOWER SPPT

LOWER ASSY

SIDE 1

0243571

RAIL-TOWER SPPT

LOWER ASSY

SIDE 2

0243559

RAIL-TOWER SPPT

LOWER ASSY

TAPER

0243572

RAIL-TOWER SPPT

LOWER ASSY

CAP PLATE

0243565

RAIL-TOWER SPPT

CLEVIS

2949T290

HOIST RING

55910 D SIZE - ASME Y14.100, REV 6-200

SHDWG. NO. 1

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243560

SHEET 1 OF 1

56420

COGNIZANT CODE

0235313

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

RAIL-TOWER SPPT ASSY

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243560

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. NO FINISH UNTIL FIT CHECK WITH OTHER HARDHARE. CONDUCTED AT SSC PACIFIC.

2. FINAL WELDING ON THIS ASSEMBLY WILL BE DONE AFTER FIT CHECK AT SSC PACIFIC. TACKING THE ASSEMBLY IN PLACE FOR FINAL WELDING WILL BE DONE DURING THE FIT CHECK. FINAL WELDING MAY BE DONE AT SSC PACIFIC OR OFFSITE.

3. AFTER TACKING THE ASSEMBLY IN PLACE, THE END SLOTTED ASSEMBLY WILL BE WELDED AT THE JOINT

4. AFTER WELDS IN NOTE 3, THE SOCKET HEAD SCREWS WILL BE REMOVED AND THE SLOTS WILL BE PLUG WELDED.

5. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED.

WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS WITH NO LEAKS FOR WATER TO PENETRATE BETWEEN SURFACES.

6. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

7. WEIGHT OF ASSEMBLY 1155 LBS

8. ASSEMBLY WILL BE SHIPPED TO PAINTING FACILITY AFTER FINAL WELDS ARE COMPLETE.

9. FINISH:

SAND BLAST STRUCTURE AND APPLY ONE COAT OF EPOXY POLYAMIDE PRIMER. FOLLOW WITH ONE COAT EPOXY POLYAMIDE PAINT (HAZE GRAY).

MAY USE AN EQUVALENT SUBSTITUTE IF APPROVED BY COGNIZANT ENGINEERING POC.

A

DETAIL A

2X 1/2

2X 1/2

1/4

2 3A054 0243573 - 1-12 SHC SCREW AND WASHER BLACK OXIDE AND ZINC 3

1 55910 0243562 - RAIL-TOWER SPPT LOWER ASSY STRUCTURAL STEEL 50 KSI 2

1 55910 0243561 - RAIL-TOWER SPPT UPPER ASSY STRUCTURAL STEEL 50 KSI 1

QTY REQ'D CAGE CODE PART OR IDENTIFYING

NUMBER

REV DESCRIPTION OR

NOMENCLATURE

MATERIAL/SPEC/REF DEG FIND NO

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243561

SHEET 1 OF 2

56420

COGNIZANT CODE

0243560

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

RAIL-TOWER SPPT UPPER

ASSY

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243561

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. MATERIALS: 50 KSI STEEL PLATE; ASTM A500 GRADE B (46KSI YIELD) OR A501 GRADE B (50KSI YIELD) RECTANGULAR STRUCTURAL STEEL TUBING

2. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR ENCLOSED SLAG PERMITTED.

WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS WITH NO LEAKS FOR WATER TO PENETRATE BETWEEN SURFACES.

3. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

4. WEIGHT OF ASSEMBLY 1037 LBS

5. NO FINISH:

1 3A054 - 2949T290 HOIST RING STAINLESS STEEL 5

1 55910 - 0243566 SWIVEL MOUNT STRUCTURAL STEEL 50 KSI 4

1 55910 - 0243565 CLEVIS PLATE STRUCTURAL STEEL 50 KSI 3

1 55910 - 0243564 UPPER ASSY CAP PLATE STRUCTURAL STEEL 50 KSI 2

1 55910 - 0243563 UPPER ASSY MAIN TUBE STRUCTURAL STEEL 50 KSI 1

QTY REQ'D CAGE CODE REV PART OR IDENTIFYING

NUMBER

DESCRIPTION OR

NOMENCLATURE

MATERIALS/SPEC/REF DEG FIND NO

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -JAN2018--

REV

0243561

0243561

59.00

4.00 6.25

4.75

1/4

1/4A

DETAIL A

B

DETAIL B

1/2

C

C SECTION C-C

0.31 STOCK

0.25

0.25

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243563

SHEET 1 OF 2

56420

COGNIZANT CODE

0243561

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

UPPER ASSY MAIN TUBE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243563

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. MATERIAL: STRUCTURAL STEEL, 12 X 8 X 0.31 WALL TUBE, ASTM 50 KSI

2. NO FINISH

3. WEIGHT: 980 LBS

8.00

STOCK

12.00 STOCK

0.31 STOCK

287.00

C

DETAIL CREFERENCE ONLY

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243563

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243563

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING -2009/03/03--

REV

DETAIL A

DETAIL B

R 0.3752 X u0.03

CUT THRU ON 2 X FACE

4.00

2.00

0.75

R 0.3754 X u 0.03

0.75

3.75

2.00 X 2

R 0.254 X

6.002 X 1.25

3.00

A

B

5.00

2.382 X

2.382 X

0.750

CUT THRU ON 2 X FACE

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243564

SHEET 1 OF 1

56420

COGNIZANT CODE

0243561

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

UPPER ASSY CAP PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243564

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 1.0 INCH THICK

2. NO FINISH

3. WEIGHT: 30 LBS

1.00 STOCK

12.50

8.50

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243565

SHEET 1 OF 1

56420

COGNIZANT CODE

0243561

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

CLEVIS PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243565

KHANSEN

TPICKERING

26FEB2018

26FEB2018

0243562

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 1.0 INCH THICK

2. NO FINISH

3. WEIGHT: 17 LBS

1.00 STOCK

10.00

4.625 u0.03

R 3.50 u0.2

O 1.625 +0.03 -0.01

74°2 X

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243566

SHEET 1 OF 1

56420

COGNIZANT CODE

0243561

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

SWIVEL MOUNT

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243566

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI

2. NO FINISH

3. WEIGHT: 7 LBS

1.62 STOCK4.00

4.00

2.00

2.00

7/8-9 UNC X 1.125 ` 1.400 u0.03

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243562

SHEET 1 OF 2

56420

COGNIZANT CODE

0243560

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

RAIL-TOWER SPPT LOWER

ASSY

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243562

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. MATERIALS: 50 KSI STEEL;

2. FITMENT AND TACKING TO BE DONE AT SSC PACIFIC. FINAL WELDING DONE BY VENDOR.

3. WELD ASSEMBLY AS SHOWN USING STANDARD WELDING TECHNIQUES AND PROCESSES. NO POROSITY OR

ENCLOSED SLAG PERMITTED.

WHERE APPLICABLE, WELDS MUST GO COMPLETELY AROUND MATING PARTS WITH NO LEAKS FOR WATER TO

PENETRATE BETWEEN SURFACES.

4. INTERPRET WELDS PER AWS A2.4-2007. VISUALLY (VT) INSPECT ALL WELDS PER AWS D1.1 CLAUSE 6.

5. WEIGHT OF ASSEMBLY115 LBS

6. NO FINISH:

1 55910 - 0243569 SIDE 1 PLATE Steel, structural 50 KSI 7

1 55910 - 0243571 SIDE 2 PLATE Steel, structural 50 KSI 6

1 55910 - 0243565 CLEVIS PLATE Steel, structural 50 KSI 5

1 55910 - 0243572 CAP PLATE Steel, structural 50 KSI 4

1 55910 - 0243559 TAPER PLATE Steel, structural 50 KSI 3

1 55910 - 0243568 BACK PLATE Steel, structural 50 KSI 2

1 55910 - 0243567 FRONT PLATE Steel, structural 50 KSI 1

QTY REQ'D CAGE CODE REV PART OR IDENTIFYING

NUMBER

DESCRIPTION OR NOMENCLATURE MATERIAL/SPEC/REF DESG FIND NO.

SHDWG. NO.

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 1

SHEET 2

55910

DRAWING NUMBERCAGE CODESIZE

SCALE: 1/1

D 0243562

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

INITIAL DRAWING ---

REV

0243562

JAN2018

1/4 2X

1/4 2X

1/4 1/4

1/4

2.38 2.88

1.25

1.25

10.000

1.00

7.50

0.25

0.622 X

2X 1/4

2X 1/4

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243567

SHEET 1 OF 1

56420

COGNIZANT CODE

0243562

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

FRONT PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243567

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 0.25 INCH THICK

2. NO FINISH

3. WEIGHT: 14 LBS

0.25 STOCK

10.75

18.00

5.375 u0.03

11.00

1-12 UNF THRU

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243568

SHEET 1 OF 1

56420

COGNIZANT CODE

0243562

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

BACK PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243568

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. STRUCTURAL STEEL, ASTM 50 KSI, 0.25 INCH THICK

2. NO FINISH

3. WEIGHT: 18 LBS

10.75

24.00

0.25 STOCK

1-12 UNF THRU

17.00

5.375 u0.03

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243569

SHEET 1 OF 1

56420

COGNIZANT CODE

0243562

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

SIDE 1 PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243569

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 0.25 INCH THICK

2. NO FINISH

3. WEIGHT: 25 LBS

24.00

6.75

1.002 X

4.75

0.2502 X

0.625

15°

4.14

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243571

SHEET 1 OF 1

56420

COGNIZANT CODE

0243562

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

SIDE 2 PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243571

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 0.25 INCH THICK

2. NO FINISH

3. WEIGHT: 25 LBS

0.625

0.252 X

24.00

6.75

1.002 X

4.75

15°

18.00

5.14

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243559

SHEET 1 OF 1

56420

COGNIZANT CODE

0243562

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

TAPER PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243559

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 0.25 INCH THICK

2. NO FINISH

3. WEIGHT: 5 LBS

A

DETAIL A

10.75

0.25

5.94 6.19

45°

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243572

SHEET 1 OF 1

56420

COGNIZANT CODE

0243562

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

CAP PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 18JUL2017

-0243572

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 1.0 INCH THICK NOMINAL

2. NO FINISH

3. WEIGHT: 21 LBS

6.25

12.50

1.0 STOCK

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243565

SHEET 1 OF 1

56420

COGNIZANT CODE

0243561

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/06/05

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE:

0235122

D

THIRD ANGLE PROJECTION

CLEVIS PLATE

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N.NGUYEN 25JAN2018

-0243565

KHANSEN

TPICKERING

26FEB2018

26FEB2018

0243562

NOTES:

1. MATERIAL: STRUCTURAL STEEL, ASTM 50 KSI, 1.0 INCH THICK

2. NO FINISH

3. WEIGHT: 17 LBS

1.00 STOCK

10.00

4.625 u0.03

R 3.50 u0.2

O 1.625 +0.03 -0.01

74°2 X

A

B

C

D

A

B

C

D

12345678

8 7 6 5 4 3 10243573

SHEET 1 OF 1

56420

COGNIZANT CODE

0243560

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

BREAK ALL EDGES .005-.015

REMOVE ALL BURRS

TOLERANCES ARE:

.XX ±.03 .XXX ±.010

ANGLES ±1°

FILLETS .03 MAX

SURFACE ROUGHNESS

55910

DO NOT SCALE THIS DRAWING

INTERPRET DRAWING IN ACCORDANCE

WITH ASME Y14.100

PREPARED

PROJECT NUMBER

APPROVED

APPROVED

CHECKED

APPROVED FOR

BY DIRECTIONRELEASED DATE: 2013/01/18

NEXT ASSY USED ON

APPLICATION

SPACE AND NAVAL WARFARE SYSTEMS CENTER

SAN DIEGO, CA 92152-5001

DRAWING NUMBERCAGE CODESIZE

SCALE: 4/1

0235122

D

THIRD ANGLE PROJECTION

1-12 SHC SCREW AND

WASHER

DESCRIPTION APPROVEDDATELTRZONE

REVISIONS

THIS DRAWING HAS BEEN GENERATED AND IS MAINTAINED BY A CAD SYSTEM. CHANGES SHALL

ONLY BE INCORPORATED AS DIRECTED BY THE COGNIZANT DESIGN ACTIVITY.

DESTRUCTION NOTICE. DESTROY BY ANY

METHOD THAT WILL PREVENT DISCLOSURE

OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND DOD

CONTRACTORS ONLY; CRITICAL TECHNOLOGY, 2014/02/10;

OTHER REQUESTS SHALL BE REFERRED TO COMMANDER,

SPACE AND NAVAL WARFARE SYSTEMS CENTER, SAN

DIEGO, CA 92152-5001.

WARNING. THIS DOCUMENT CONTAINS TECHNICAL DATA

WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT

CONTROL ACT (TITLE 22, U.S.C. SEC. 2751 ET SEQ.) OR

EXECUTIVE ORDER 12470. VIOLATORS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

INITIAL DRAWING -JAN2018--

REV

N. NGUYEN 25JAN2018

-0243573

KHANSEN

TPICKERING

26FEB2018

26FEB2018

NOTES:

1. 1-12 SOCKET HEAD CAP SCREW W/FENDER WASHER

2. MCMASTER NUMBERS PROVIDED

3. WEIGHT: 1 LBS

1 3A054 - 91117A250 OVERSIZED FLAT WASHER ZINC-PLATED STEEL 2

1 3A054 - 90044A270 SOCKET HEAD CAP SCREW BLACK-OXIDE ALLOY STEEL 1

QTY REQ'D CAGE CODE REV PART OR IDENTIFYING

NUMBER

DESCRIPTION OR

NOMENCLATURE

MATERIAL/SPEC/REF DESG FIND NO.