Attachment 3. Safety OSHA 29 CFR 1926.pdf

PART 1926—SAFETY AND HEALTH

REGULATIONS FOR CONSTRUCTION

Subpart A—General

Sec.

1926.1 Purpose and scope.

1926.2 Variances from safety and health

standards.

1926.3 Inspections—right of entry.

1926.4 Rules of practice for administrative

adjudications for enforcement of safety and health standards.

1926.5 OMB control numbers under the Pa-

perwork Reduction Act.

1926.6 Incorporation by reference.

Subpart B—General Interpretations

1926.10 Scope of subpart.

1926.11 Coverage under section 103 of the act

distinguished.

1926.12 Reorganization Plan No. 14 of 1950.

1926.13 Interpretation of statutory terms.

1926.14 Federal contract for ‘‘mixed’’ types

of performance.

1926.15 Relationship to the Service Contract

Act; Walsh-Healey Public Contracts Act.

1926.16 Rules of construction.

Subpart C—General Safety and Health Provisions

1926.20 General safety and health provi-

sions.

1926.21 Safety training and education.

1926.22 Recording and reporting of injuries.

[Reserved]

1926.23 First aid and medical attention.

1926.24 Fire protection and prevention.

1926.25 Housekeeping.

1926.26 Illumination.

1926.27 Sanitation.

1926.28 Personal protective equipment.

1926.29 Acceptable certifications.

1926.30 Shipbuilding and ship repairing.

1926.32 Definitions.

1926.33 Access to employee exposure and

medical records.

1926.34 Means of egress.

1926.35 Employee emergency action plans.

Subpart D—Occupational Health and Environmental Controls

1926.50 Medical services and first aid.

1926.51 Sanitation.

1926.52 Occupational noise exposure.

1926.53 Ionizing radiation.

1926.54 Nonionizing radiation.

1926.55 Gases, vapors, fumes, dusts, and

mists.

1926.56 Illumination.

1926.57 Ventilation.

1926.58 [Reserved]

1926.59 Hazard communication.

1926.60 Methylenedianiline.

1926.61 Retention of DOT markings, plac-

ards and labels.

1926.62 Lead.

1926.64 Process safety management of high-

ly hazardous chemicals.

1926.65 Hazardous waste operations and

emergency response.

1926.66 Criteria for design and construction

of spray booths.

Subpart E—Personal Protective and Life Saving Equipment

1926.95 Criteria for personal protective

equipment.

1926.96 Occupational foot protection.

1926.97–1926.98 [Reserved]

1926.100 Head protection.

1926.101 Hearing protection.

1926.102 Eye and face protection.

1926.103 Respiratory protection.

1926.104 Safety belts, lifelines, and lanyards.

1926.105 Safety nets.

1926.106 Working over or near water.

1926.107 Definitions applicable to this sub-

part.

Subpart F—Fire Protection and Prevention

1926.150 Fire protection.

1926.151 Fire prevention.

1926.152 Flammable liquids.

1926.153 Liquefied petroleum gas (LP-Gas).

1926.154 Temporary heating devices.

1926.155 Definitions applicable to this sub-

part.

Subpart G—Signs, Signals, and Barricades

1926.200 Accident prevention signs and tags.

1926.201 Signaling.

1926.202 Barricades.

1926.203 Definitions applicable to this sub-

part.

Subpart H—Materials Handling, Storage, Use, and Disposal

1926.250 General requirements for storage.

1926.251 Rigging equipment for material

handling.

1926.252 Disposal of waste materials.

Subpart I—Tools—Hand and Power

1926.300 General requirements.

1926.301 Hand tools.

1926.302 Power-operated hand tools.

1926.303 Abrasive wheels and tools.

1926.304 Woodworking tools.

1926.305 Jacks—lever and ratchet, screw, and hydraulic.

1926.306 Air receivers.

1926.307 Mechanical power-transmission ap-

paratus.

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00017 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

29 CFR Ch. XVII (7–1–13 Edition) Pt. 1926

Subpart J—Welding and Cutting

1926.350 Gas welding and cutting.

1926.351 Arc welding and cutting.

1926.352 Fire prevention.

1926.353 Ventilation and protection in weld-

ing, cutting, and heating.

1926.354 Welding, cutting, and heating in

way of preservative coatings.

Subpart K—Electrical

GENERAL

1926.400 Introduction.

1926.401 [Reserved]

INSTALLATION SAFETY REQUIREMENTS

1926.402 Applicability.

1926.403 General requirements.

1926.404 Wiring design and protection.

1926.405 Wiring methods, components, and

equipment for general use.

1926.406 Specific purpose equipment and in-

stallations.

1926.407 Hazardous (classified) locations.

1926.408 Special systems.

1926.409–1926.415 [Reserved]

SAFETY-RELATED WORK PRACTICES

1926.416 General requirements.

1926.417 Lockout and tagging of circuits.

1926.418–1926.430 [Reserved]

SAFETY-RELATED MAINTENANCE AND

ENVIRONMENTAL CONSIDERATIONS

1926.431 Maintenance of equipment.

1926.432 Environmental deterioration of

equipment.

1926.433–1926.440 [Reserved]

SAFETY REQUIREMENTS FOR SPECIAL

EQUIPMENT

1926.441 Batteries and battery charging.

1926.442–1926.448 [Reserved]

DEFINITIONS

1926.449 Definitions applicable to this sub-

part.

Subpart L—Scaffolds

1926.450 Scope, application and definitions

applicable to this subpart.

1926.451 General requirements.

1926.452 Additional requirements applicable

to specific types of scaffolds.

1926.453 Aerial lifts.

1926.454 Training requirements.

APPENDIX A TO SUBPART L—SCAFFOLD SPECI-

FICATIONS

APPENDIX B TO SUBPART L—CRITERIA FOR DE-

TERMINING THE FEASIBILITY OF PROVIDING

SAFE ACCESS AND FALL PROTECTION FOR

SCAFFOLD ERECTORS AND DISMANTLERS

[RESERVED]

APPENDIX C TO SUBPART L—LIST OF NA-

TIONAL CONSENSUS STANDARDS

APPENDIX D TO SUBPART L—LIST OF TRAINING

TOPICS FOR SCAFFOLD ERECTORS AND DIS-

MANTLERS [RESERVED]

APPENDIX E TO SUBPART L—DRAWINGS AND

ILLUSTRATIONS

Subpart M—Fall Protection

1926.500 Scope, application, and definitions

applicable to this subpart.

1926.501 Duty to have fall protection.

1926.502 Fall protection systems criteria

and practices.

1926.503 Training requirements.

APPENDIX A TO SUBPART M—DETERMINING

ROOF WIDTHS

APPENDIX B TO SUBPART M—GUARDRAIL SYS-

TEMS

APPENDIX C TO SUBPART M—PERSONAL FALL

ARREST SYSTEMS

APPENDIX D TO SUBPART M—POSITIONING DE-

VICE SYSTEMS

APPENDIX E TO SUBPART M—SAMPLE FALL

PROTECTION PLANS

Subpart N—Helicopters, Hoists, Elevators, and Conveyors

1926.550 [Reserved]

1926.551 Helicopters.

1926.552 Material hoists, personnel hoists, and elevators.

1926.553 Base-mounted drum hoists.

1926.554 Overhead hoists.

1926.555 Conveyors.

Subpart O—Motor Vehicles, Mechanized Equipment, and Marine Operations

1926.600 Equipment.

1926.601 Motor vehicles.

1926.602 Material handling equipment.

1926.603 Pile driving equipment.

1926.604 Site clearing.

1926.605 Marine operations and equipment.

1926.606 Definitions applicable to this sub-

part.

Subpart P—Excavations

1926.650 Scope, application, and definitions

applicable to this subpart.

1926.651 Specific excavation requirements.

1926.652 Requirements for protective sys-

tems.

APPENDIX A TO SUBPART P—SOIL CLASSIFICA-

TION

APPENDIX B TO SUBPART P—SLOPING AND

BENCHING

APPENDIX C TO SUBPART P—TIMBER SHORING

FOR TRENCHES

APPENDIX D TO SUBPART P—ALUMINUM HY-

DRAULIC SHORING FOR TRENCHES

APPENDIX E TO SUBPART P—ALTERNATIVES TO

TIMBER SHORING

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00018 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

Occupational Safety and Health Admin., Labor Pt. 1926

APPENDIX F TO SUBPART P—SELECTION OF

PROTECTIVE SYSTEMS

Subpart Q—Concrete and Masonry Construction

1926.700 Scope, application, and definitions

applicable to this subpart.

1926.701 General requirements.

1926.702 Requirements for equipment and

tools.

1926.703 Requirements for cast-in-place con-

crete.

1926.704 Requirements for precast concrete.

1926.705 Requirements for lift-slab construc-

tion operations.

1926.706 Requirements for masonry con-

struction.

APPENDIX A TO SUBPART Q—REFERENCES TO

SUBPART Q OF PART 1926

Subpart R—Steel Erection

1926.750 Scope.

1926.751 Definitions.

1926.752 Site layout, site-specific erection

plan and construction sequence.

1926.753 Hoisting and rigging.

1926.754 Structural steel assembly.

1926.755 Column anchorage.

1926.756 Beams and columns.

1926.757 Open web steel joists.

1926.758 Systems-engineered metal build-

ings.

1926.759 Falling object protection.

1926.760 Fall protection.

1926.761 Training.

APPENDIX A TO SUBPART R—GUIDELINES FOR

ESTABLISHING THE COMPONENTS OF A SITE-

SPECIFIC ERECTION PLAN: NON-MANDATORY

GUIDELINES FOR COMPLYING WITH

§ 1926.752(E)

APPENDIX B TO SUBPART R [RESERVED]

APPENDIX C TO SUBPART R—ILLUSTRATIONS

OF BRIDGING TERMINUS POINTS: NON-MAN-

DATORY GUIDELINES FOR COMPLYING WITH

§ 1926.757(A)(10) AND § 1926.757(C)(5)

APPENDIX D TO SUBPART R—ILLUSTRATION OF

THE USE OF CONTROL LINES TO DEMARCATE

CONTROLLED DECKING ZONES (CDZS): NON-

MANDATORY GUIDELINES FOR COMPLYING

WITH § 1926.760(C)(3)

APPENDIX E TO SUBPART R—TRAINING: NON-

MANDATORY GUIDELINES FOR COMPLYING

WITH § 1926.761

APPENDIX F TO SUBPART R—PERIMETER COL-

UMNS: NON-MANDATORY GUIDELINES FOR

COMPLYING WITH § 1926.756(E) TO PROTECT

THE UNPROTECTED SIDE OR EDGE OF A

WALKING/WORKING SURFACE

APPENDIX G TO SUBPART R—FALL PROTECTION

SYSTEMS CRITERIA AND PRACTICES FROM

§ 1926.502: NON-MANDATORY GUIDELINES

FOR COMPLYING WITH COMPLYING WITH

§ 1926.760(D)

APPENDIX H TO SUBPART R—DOUBLE CONNEC-

TIONS: ILLUSTRATION OF A CLIPPED END

CONNECTION AND A STAGGERED CONNEC-

TION: NON-MANDATORY GUIDELINES FOR

COMPLYING WITH COMPLYING WITH

§ 1926.756(C)(1)

Subpart S—Underground Construction, Caissons, Cofferdams and Compressed Air

1926.800 Underground construction.

1926.801 Caissons.

1926.802 Cofferdams.

1926.803 Compressed air.

1926.804 Definitions applicable to this sub-

part.

APPENDIX A TO SUBPART S—DECOMPRESSION

TABLES

Subpart T—Demolition

1926.850 Preparatory operations.

1926.851 Stairs, passageways, and ladders.

1926.852 Chutes.

1926.853 Removal of materials through floor

openings.

1926.854 Removal of walls, masonry sec-

tions, and chimneys.

1926.855 Manual removal of floors.

1926.856 Removal of walls, floors, and mate-

rial with equipment.

1926.857 Storage.

1926.858 Removal of steel construction.

1926.859 Mechanical demolition.

1926.860 Selective demolition by explosives.

Subpart U—Blasting and the Use of Explosives

1926.900 General provisions.

1926.901 Blaster qualifications.

1926.902 Surface transportation of explo-

sives.

1926.903 Underground transportation of ex-

plosives.

1926.904 Storage of explosives and blasting

agents.

1926.905 Loading of explosives or blasting

agents.

1926.906 Initiation of explosive charges—

electric blasting.

1926.907 Use of safety fuse.

1926.908 Use of detonating cord.

1926.909 Firing the blast.

1926.910 Inspection after blasting.

1926.911 Misfires.

1926.912 Underwater blasting.

1926.913 Blasting in excavation work under

compressed air.

1926.914 Definitions applicable to this sub-

part.

Subpart V—Power Transmission and Distribution

1926.950 General requirements.

1926.951 Tools and protective equipment.

1926.952 Mechanical equipment.

1926.953 Material handling.

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00019 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

29 CFR Ch. XVII (7–1–13 Edition) Pt. 1926

1926.954 Grounding for protection of em-

ployees.

1926.955 Overhead lines.

1926.956 Underground lines.

1926.957 Construction in energized sub-

stations.

1926.958 External load helicopters.

1926.959 Lineman’s body belts, safety straps, and lanyards.

1926.960 Definitions applicable to this sub-

part.

Subpart W—Rollover Protective Structures;

Overhead Protection

1926.1000 Rollover protective structures

(ROPS) for material handling equipment.

1926.1001 Minimum performance criteria for

rollover protective structures for des-ignated scrapers, loaders, dozers, graders, and crawler tractors.

1926.1002 Protective frames (roll-over pro-

tective structures, known as ROPS) for wheel-type agricultural and industrial tractors used in construction.

1926.1003 Overhead protection for operators

of agricultural and industrial tractors used in construction.

APPENDIX A TO SUBPART W—FIGURES W–14

THROUGH W–28

Subpart X—Stairways and Ladders

1926.1050 Scope, application, and definitions

applicable to this subpart.

1926.1051 General requirements.

1926.1052 Stairways.

1926.1053 Ladders.

1926.1054–1926.1059 [Reserved]

1926.1060 Training requirements.

APPENDIX A TO SUBPART X—LADDERS

Subpart Y—Diving

GENERAL

1926.1071 Scope and application.

1926.1072 Definitions.

PERSONNEL REQUIREMENTS

1926.1076 Qualifications of dive team.

GENERAL OPERATIONS PROCEDURES

1926.1080 Safe practices manual.

1926.1081 Pre-dive procedures.

1926.1082 Procedures during dive.

1926.1083 Post-dive procedures.

SPECIFIC OPERATIONS PROCEDURES

1926.1084 SCUBA diving.

1926.1085 Surface-supplied air diving.

1926.1086 Mixed-gas diving.

1926.1087 Liveboating.

EQUIPMENT PROCEDURES AND REQUIREMENTS

1926.1090 Equipment.

RECORDKEEPING

1926.1091 Recordkeeping requirements.

APPENDIX A TO SUBPART Y—EXAMPLES OF

CONDITIONS WHICH MAY RESTRICT OR

LIMIT EXPOSURE TO HYPERBARIC CONDI-

TIONS

APPENDIX B TO SUBPART Y—GUIDELINES FOR

SCIENTIFIC DIVING

Subpart Z—Toxic and Hazardous Substances

1926.1100 [Reserved]

1926.1101 Asbestos.

1926.1102 Coal tar pitch volatiles; interpre-

tation of term.

1926.1103 13 carcinogens (4-Nitrobiphenyl, etc.).

1926.1104 alpha-Naphthylamine.

1926.1105 [Reserved]

1926.1106 Methyl chloromethyl ether.

1926.1107 3,3′-Dichlorobenzidiene (and its salts).

1926.1108 bis-Chloromethyl ether.

1926.1109 beta-Naphthylamine.

1926.1110 Benzidine.

1926.1111 4-Aminodiphenyl.

1926.1112 Ethyleneimine.

1926.1113 beta-Propiolactone.

1926.1114 2-Acetylaminofluorene.

1926.1115 4-Dimethylaminoazobenzene.

1926.1116 N-Nitrosodimethylamine.

1926.1117 Vinyl chloride.

1926.1118 Inorganic arsenic.

1926.1126 Chromium (VI).

1926.1127 Cadmium.

1926.1128 Benzene.

1926.1129 Coke oven emissions.

1926.1144 1,2-dibromo-3-chloropropane.

1926.1145 Acrylonitrile.

1926.1147 Ethylene oxide.

1926.1148 Formaldehyde.

1926.1152 Methylene chloride.

Subparts AA–BB [Reserved]

Subpart CC—Cranes and Derricks in Construction

1926.1400 Scope.

1926.1401 Definitions.

1926.1402 Ground conditions.

1926.1403 Assembly/Disassembly—selection

of manufacturer or employer procedures.

1926.1404 Assembly/Disassembly—general re-

quirements (applies to all assembly and disassembly operations).

1926.1405 Disassembly—additional require-

ments for dismantling of booms and jibs (applies to both the use of manufacturer procedures and employer procedures).

1926.1406 Assembly/Disassembly—employer

procedures—general requirements.

1926.1407 Power line safety (up to 350 kV)—

assembly and disassembly.

1926.1408 Power line safety (up to 350 kV)—

equipment operations.

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00020 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

Occupational Safety and Health Admin., Labor § 1926.2

1926.1409 Power line safety (over 350 kV).

1926.1410 Power line safety (all voltages)—

equipment operations closer than the Table A zone.

1926.1411 Power line safety—while traveling.

1926.1412 Inspections.

1926.1413 Wire rope—inspection.

1926.1414 Wire rope—selection and installa-

tion criteria.

1926.1415 Safety devices.

1926.1416 Operational aids.

1926.1417 Operation.

1926.1418 Authority to stop operation.

1926.1419 Signals—general requirements.

1926.1420 Signals—radio, telephone or other

electronic transmission of signals.

1926.1421 Signals—voice signals—additional

requirements.

1926.1422 Signals—hand signal chart.

1926.1423 Fall protection.

1926.1424 Work area control.

1926.1425 Keeping clear of the load.

1926.1426 Free fall and controlled load low-

ering.

1926.1427 Operator qualification and certifi-

cation.

1926.1428 Signal person qualifications.

1926.1429 Qualifications of maintenance &

repair employees.

1926.1430 Training.

1926.1431 Hoisting personnel.

1926.1432 Multiple-crane/derrick lifts—sup-

plemental requirements.

1926.1433 Design, construction and testing.

1926.1434 Equipment modifications.

1926.1435 Tower cranes.

1926.1436 Derricks.

1926.1437 Floating cranes/derricks and land

cranes/derricks on barges.

1926.1438 Overhead & gantry cranes.

1926.1439 Dedicated pile drivers.

1926.1440 Sideboom cranes.

1926.1441 Equipment with a rated hoisting/

lifting capacity of 2,000 pounds or less.

1926.1442 Severability.

APPENDIX A TO SUBPART CC OF PART 1926—

STANDARD HAND SIGNALS

APPENDIX B TO SUBPART CC OF PART 1926—

ASSEMBLY/DISASSEMBLY—SAMPLE PROCE-

DURES FOR MINIMIZING THE RISK OF UNIN-

TENDED DANGEROUS BOOM MOVEMENT

APPENDIX C TO SUBPART CC OF PART 1926—

OPERATOR CERTIFICATION—WRITTEN EX-

AMINATION—TECHNICAL KNOWLEDGE CRI-

TERIA

APPENDIX A TO PART 1926—DESIGNATIONS FOR

GENERAL INDUSTRY STANDARDS INCOR-

PORATED INTO BODY OF CONSTRUCTION

STANDARDS

SOURCE: 44 FR 8577, Feb. 9, 1979; 44 FR 20940, Apr. 6, 1979, unless otherwise noted.

EDITORIAL NOTE: At 44 FR 8577, Feb. 9, 1979, and corrected at 44 FR 20940, Apr. 6, 1979, OSHA reprinted without change the entire text of 29 CFR part 1926 together with cer-tain General Industry Occupational Safety and Health Standards contained in 29 CFR part 1910, which have been identified as also applicable to construction work. This repub-lication developed a single set of OSHA regu-lations for both labor and management forces within the construction industry.

Subpart A—General

AUTHORITY: 40 U.S.C. 333; 29 U.S.C. 653, 655,

657; Secretary of Labor’s Order No. 12–71 (36

FR 8754), 8–76 (41 FR 25059), 9–83 (48 FR 35736),

6–96 (62 FR 111), 5–2007 (72 FR 31160), 4–2010 (75

FR 55355), or 1–2012 (77 FR 3912), as applica-ble; and 29 CFR part 1911.

§ 1926.1 Purpose and scope.

(a) This part sets forth the safety and health standards promulgated by the Secretary of Labor under section 107 of the Contract Work Hours and Safety Standards Act. The standards are pub-lished in subpart C of this part and fol-lowing subparts.

(b) Subpart B of this part contains statements of general policy and inter-pretations of section 107 of the Con-tract Work Hours and Safety Stand-ards Act having general applicability.

§ 1926.2 Variances from safety and health standards.

(a) Variances from standards which are, or may be, published in this part may be granted under the same cir-cumstances whereunder variances may be granted under section 6(b)(A) or 6(d) of the Williams-Steiger Occupational Safety and Health Act of 1970 (29 U.S.C.

65). The procedures for the granting of variances and for related relief under this part are those published in part 1905 of this title.

(b) Any requests for variances under this section shall also be considered re-quests for variances under the Wil-liams-Steiger Occupational Safety and Health Act of 1970, and any requests for variances under Williams-Steiger Occu-pational Safety and Health Act with respect to construction safety or health standards shall be considered to be also variances under the Construc-tion Safety Act. Any variance from a construction safety or health standard which is contained in this part and which is incorporated by reference in part 1910 of this title shall be deemed a variance from the standard under both the Construction Safety Act and the

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00021 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

29 CFR Ch. XVII (7–1–13 Edition) § 1926.3

Williams-Steiger Occupational Safety and Health Act of 1970.

§ 1926.3 Inspections—right of entry.

(a) It shall be a condition of each contract which is subject to section 107 of the Contract Work Hours and Safety Standards Act that the Secretary of Labor or any authorized representative shall have a right of entry to any site of contract performance for the fol-lowing purposes:

(1) To inspect or investigate the mat-ter of compliance with the safety and health standards contained in subpart C of this part and following subparts;

and

(2) To carry out the duties of the Sec-retary under section 107(b) of the Act.

(b) For the purpose of carrying out his investigative duties under the Act, the Secretary of Labor may, by agree-ment, use with or without reimburse-ment the services, personnel, and fa-cilities of any State or Federal agency.

Any agreements with States under this section shall be similar to those pro-vided for under the Walsh-Healey Pub-lic Contracts Act under 41 CFR part 50– 205.

§ 1926.4 Rules of practice for adminis-trative adjudications for enforce-ment of safety and health stand-ards.

(a) The rules of practice for adminis-trative adjudications for the enforce-ment of the safety and health stand-ards contained in subpart C of this part and the following subparts shall be the same as those published in part 6 of this title with respect to safety and health violations of the Service Con-tract Act of 1965 (69 Stat. 1035), except as provided in paragraph (b) of this sec-tion.

(b) In the case of debarment, the find-ings required by section 107(d) of the Act shall be made by the hearing exam-iner or the Assistant Secretary of Labor for Occupational Safety and Health, as the case may be. Whenever, as provided in section 107(d)(2), a con-tractor requests termination of debar-ment before the end of the 3-year pe-riod prescribed in that section, the re-quest shall be filed in writing with the Assistant Secretary of Labor for Occu-pational Safety and Health who shall publish a notice in the FEDERAL REG- ISTER that the request has been re-ceived and afford interested persons an opportunity to be heard upon the re-quest, and thereafter the provisions of part 6 of this title shall apply with re-spect to prehearing conferences, hear-ings and related matters, and decisions and orders.

§ 1926.5 OMB control numbers under the Paperwork Reduction Act.

The following sections or paragraphs each contain a collection of informa-tion requirement which has been ap-proved by the Office of Management and Budget under the control number listed.

29 CFR citation OMB con-trol No.

1926.33 ................................................................ 1218–0065

1926.50 ................................................................ 1218–0093

1926.52 ................................................................ 1218–0048

1926.53 ................................................................ 1218–0103

1926.59 ................................................................ 1218–0072

1926.60 ................................................................ 1218–0183

1926.62 ................................................................ 1218–0189

1926.64 ................................................................ 1218–0200

1926.65 ................................................................ 1218–0202

1926.103 .............................................................. 1218–0099

1926.200 .............................................................. 1218–0132

1926.250 .............................................................. 1218–0093

1926.251 .............................................................. 1218–0233

1926.403 .............................................................. 1218–0130

1926.404 .............................................................. 1218–0130

1926.405 .............................................................. 1218–0130

1926.407 .............................................................. 1218–0130

1926.408 .............................................................. 1218–0130 1926.453(a)(2) ..................................................... 1218–0216

1926.502 .............................................................. 1218–0197

1926.503 .............................................................. 1218–0197 1926.550(a)(1) ..................................................... 1218–0115 1926.550(a)(2) ..................................................... 1218–0115 1926.550(a)(4) ..................................................... 1218–0115 1926.550(a)(6) ..................................................... 1218–0113 1926.550(a)(11) ................................................... 1218–0054 1926.550(a)(16) ................................................... 1218–0115 1926.550(b)(2) ..................................................... 1218–0232 1926.550(g) ......................................................... 1218–0151

1926.552 .............................................................. 1218–0231

1926.652 .............................................................. 1218–0137

1926.703 .............................................................. 1218–0095

1926.800 .............................................................. 1218–0067

1926.803 .............................................................. 1218–0067

1926.900 .............................................................. 1218–0217

1926.903 .............................................................. 1218–0227

1926.1080 ............................................................ 1218–0069

1926.1081 ............................................................ 1218–0069

1926.1083 ............................................................ 1218–0069

1926.1090 ............................................................ 1218–0069

1926.1091 ............................................................ 1218–0069

1926.1101 ............................................................ 1218–0134

1926.1103 ............................................................ 1218–0085

1926.1104 ............................................................ 1218–0084

1926.1106 ............................................................ 1218–0086

1926.1107 ............................................................ 1218–0083

1926.1108 ............................................................ 1218–0087

1926.1109 ............................................................ 1218–0089

1926.1110 ............................................................ 1218–0082

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00022 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

Occupational Safety and Health Admin., Labor § 1926.6

29 CFR citation OMB con-trol No.

1926.1111 ............................................................ 1218–0090

1926.1112 ............................................................ 1218–0080

1926.1113 ............................................................ 1218–0079

1926.1114 ............................................................ 1218–0088

1926.1115 ............................................................ 1218–0044

1926.1116 ............................................................ 1218–0081

1926.1117 ............................................................ 1218–0010

1926.1118 ............................................................ 1218–0104

1926.1126 ............................................................ 1218–0252

1926.1127 ............................................................ 1218–0186

1926.1128 ............................................................ 1218–0129

1926.1129 ............................................................ 1218–0128

1926.1144 ............................................................ 1218–0101

1926.1145 ............................................................ 1218–0126

1926.1147 ............................................................ 1218–0108

1926.1148 ............................................................ 1218–0145

1926.1402 ............................................................ 1218–0261

1926.1403 ............................................................ 1218–0261

1926.1404 ............................................................ 1218–0261

1926.1406 ............................................................ 1218–0261

1926.1407 ............................................................ 1218–0261

1926.1408 ............................................................ 1218–0261

1926.1409 ............................................................ 1218–0261

1926.1410 ............................................................ 1218–0261

1926.1411 ............................................................ 1218–0261

1926.1412 ............................................................ 1218–0261

1926.1413 ............................................................ 1218–0261

1926.1414 ............................................................ 1218–0261

1926.1417 ............................................................ 1218–0261

1926.1423 ............................................................ 1218–0261

1926.1424 ............................................................ 1218–0261

1926.1427 ............................................................ 1218–0261

1926.1428 ............................................................ 1218–0261

1926.1431 ............................................................ 1218–0261

1926.1433 ............................................................ 1218–0261

1926.1434 ............................................................ 1218–0261

1926.1435 ............................................................ 1218–0261

1926.1436 ............................................................ 1218–0261

1926.1437 ............................................................ 1218–0261

1926.1441 ............................................................ 1218–0261

[61 FR 5509, Feb. 13, 1996, as amended at 63 FR 3814, Jan. 27, 1998; 63 FR 13340, Mar. 19, 1998; 63 FR 17094, Apr. 8, 1998; 64 FR 18810, Apr. 16, 1999; 71 FR 38086, July 5, 2006; 75 FR 68430, Nov. 8, 2010]

§ 1926.6 Incorporation by reference.

(a) The standards of agencies of the

U.S. Government, and organizations which are not agencies of the U.S. Gov-ernment which are incorporated by ref-erence in this part, have the same force and effect as other standards in this part. Only the mandatory provisions (i.e., provisions containing the word ‘‘shall’’ or other mandatory language) of standards incorporated by reference are adopted as standards under the Oc-cupational Safety and Health Act. The locations where these standards may be examined are as follows:

(1) Offices of the Occupational Safety and Health Administration, U.S. De-partment of Labor, Frances Perkins Building, Washington, DC 20210.

(2) The Regional and Field Offices of the Occupational Safety and Health Administration, which are listed in the U.S. Government Manual.

(b) The materials listed in para-graphs (g) through (ff) of this section are incorporated by reference in the corresponding sections noted as they exist on the date of the approval, and a notice of any change in these materials will be published in the FEDERAL REG- ISTER. These incorporations by ref-erence were approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

(c) Copies of standards listed in this section and issued by private standards organizations are available for pur-chase from the issuing organizations at the addresses or through the other con-tact information listed below for these private standards organizations. In ad-dition, these standards are available for inspection at the National Archives and Records Administration (NARA).

For information on the availability of these standards at NARA, telephone:

202–741–6030, or go to http:// www.archives.gov/federallregister/ codeloflfederallregulations/ ibrllocations.html. Also, the standards are available for inspection at any Re-gional Office of the Occupational Safe-ty and Health Administration (OSHA), or at the OSHA Docket Office, U.S. De-partment of Labor, 200 Constitution Avenue, NW., Room N–2625, Wash-ington, DC 20210; telephone: 202–693–2350 (TTY number: 877–889–5627).

(d)–(f) [Reserved]

(g) The following material is avail-able for purchase from the American Conference of Governmental Industrial Hygienists (ACGIH), 1330 Kemper Meadow Drive, Cincinnati, OH 45240;

telephone: 513–742–6163; fax: 513–742– 3355; e-mail: mail@acgih.org; Web site:

http://www.acgih.org:

(1) Threshold Limit Values of Air-borne Contaminants for 1970, 1970, IBR approved for § 1926.55(a) and appendix A of § 1926.55.

(h) The following material is avail-able for purchase from the American National Standards Institute (ANSI), 25 West 43rd Street, Fourth Floor, New York, NY 10036; telephone: 212–642–4900;

fax: 212–302–1286; e-mail: info@ansi.org;

Web site: http://www.ansi.org/.

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00023 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

29 CFR Ch. XVII (7–1–13 Edition) § 1926.6

(1) ANSI A10.3–1970, Safety Require-ments for Explosive-Actuated Fas-tening Tools, IBR approved for § 1926.302(e).

(2) ANSI A10.4–1963, Safety Require-ments for Workmen’s Hoists, IBR ap-proved for § 1926.552(c).

(3) ANSI A10.5–1969, Safety Require-ments for Material Hoists, IBR ap-proved for § 1926.552(b).

(4) ANSI A11.1–1965 (R1970), Practice for Industrial Lighting, IBR approved for § 1926.56(b).

(5) ANSI A17.1–1965, Elevators, Dumbwaiters, Escalators, and Moving Walks, IBR approved for § 1926.552(d).

(6) ANSI A17.1a–1967, Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement, IBR approved for § 1926.552(d).

(7) ANSI A17.1b–1968, Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement, IBR approved for § 1926.552(d).

(8) ANSI A17.1c–1969, Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement, IBR approved for § 1926.552(d).

(9) ANSI A17.1d–1970, Elevators, Dumbwaiters, Escalators, and Moving Walks Supplement, IBR approved for § 1926.552(d).

(10) ANSI A17.2–1960, Practice for the Inspection of Elevators (Inspector’s Manual), IBR approved for § 1926.552(d).

(11) ANSI A17.2a–1965, Practice for the Inspection of Elevators (Inspector’s Manual) Supplement, IBR approved for § 1926.552(d).

(12) ANSI A17.2b–1967, Practice for the Inspection of Elevators (Inspector’s Manual) Supplement, IBR approved for § 1926.552(d).

(13) ANSI A92.2–1969, Vehicle Mount-ed Elevating and Rotating Work Plat-forms, IBR approved for §§ 1926.453(a) and 1926.453(b).

(14) ANSI B7.1–1970, Safety Code for the Use, Care, and Protection of Abra-sive Wheels, IBR approved for §§ 1926.57(g), 1926.303(b), 1926.303(c), and 1926.303(d).

(15) ANSI B20.1–1957, Safety Code for Conveyors, Cableways, and Related Equipment, IBR approved for § 1926.555(a).

(16) ANSI B56.1–1969, Safety Stand-ards for Powered Industrial Trucks, IBR approved for § 1926.602(c).

(17) ANSI J6.1–1950 (R1971), Rubber Insulating Line Hose, IBR approved for § 1926.951(a).

(18) ANSI J6.2–1950 (R1971), Rubber Insulating Hoods, IBR approved for § 1926.951(a).

(19) ANSI J6.4–1971, Rubber Insu-lating Blankets, IBR approved for § 1926.951(a).

(20) ANSI J6.5–1971, Rubber Insu-lating Sleeves, IBR approved for § 1926.951(a).

(21) ANSI J6.6–1971, Rubber Insu-lating Gloves, IBR approved for § 1926.951(a).

(22) ANSI J6.7–1935 (R1971), Rubber Matting for Use Around Electric Appa-ratus, IBR approved for § 1926.951(a).

(23) ANSI O1.1–1961, Safety Code for Woodworking Machinery, IBR approved for § 1926.304(f).

(24) ANSI Z35.1–1968, Specifications for Accident Prevention Signs, IBR ap-proved for § 1926.200(i).

(25) ANSI Z35.2–1968, Specifications for Accident Prevention Tags, IBR ap-proved for § 1926.200(i).

(26) ANSI Z49.1–1967, Safety in Weld-ing and Cutting, IBR approved for § 1926.350(j).

(27) ANSI Z87.1–1968, Practice for Oc-cupational and Educational Eye and Face Protection, IBR approved for § 1926.102(a).

(28) American National Standards In-stitute (ANSI) Z89.1–2009, American Na-tional Standard for Industrial Head Protection, approved January 26, 2009;

IBR approved for § 1926.100(b)(1)(i). Cop-ies of ANSI Z89.1–2009 are available for purchase only from the International Safety Equipment Association, 1901 North Moore Street, Arlington, VA 22209–1762; telephone: 703–525–1695; fax:

703–528–2148; Web site:

www.safetyequipment.org.

(29) American National Standards In-stitute (ANSI) Z89.1–2003, American Na-tional Standard for Industrial Head Protection; IBR approved for § 1926.100(b)(1)(ii). Copies of ANSI Z89.1– 2003 are available for purchase only from the International Safety Equip-ment Association, 1901 North Moore Street, Arlington, VA 22209–1762; tele-phone: 703–525–1695; fax: 703–528–2148;

Web site: www.safetyequipment.org.

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00024 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

(30) American National Standards In-stitute (ANSI) Z89.1–1997, American Na-tional Standard for Personnel Protec-tion—Protective Headwear for Indus-trial Workers—Requirements; IBR ap-proved for § 1926.100(b)(1)(iii). Copies of ANSI Z89.1–1997 are available for pur-chase only from the International Safe-ty Equipment Association, 1901 North Moore Street, Arlington, VA 22209–1762;

telephone: 703–525–1695; fax: 703–528– 2148; Web site: www.safetyequipment.org.

(i) [Reserved]

(j) The following material is avail-able for purchase from the American Society for Testing and Materials (ASTM), ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428–2959; tele-phone: 610–832–9585; fax: 610–832–9555; e-mail: service@astm.org; Web site: http:// www.astm.org/:

(1) ASTM A370–1968, Methods and Definitions for Mechanical Testing and Steel Products, IBR approved for § 1926.1001(f).

(2) ASTM B117–1964, 50 Hour Test, IBR approved for § 1926.959(a).

(3) ASTM D56–1969, Standard Method of Test for Flash Point by the Tag Closed Tester, IBR approved for § 1926.155(i).

(4) ASTM D93–1969, Standard Method of Test for Flash Point by the Pensky Martens Closed Tester, IBR approved for § 1926.155(i).

(5) ASTM D323–1958 (R1968), Standard Method of Test for Vapor Pressure of Petroleum Products (Reid Method), IBR approved for § 1926.155(m).

(k) The following material is avail-able for purchase from the American Society of Agricultural and Biological Engineers (ASABE), 2950 Niles Road, St. Joseph, MI 49085; telephone: 269–429– 0300; fax: 269–429–3852; e-mail:

hq@asabe.org; Web site: http:// www.asabe.org/:

(1) ASAE R313.1–1971, Soil Cone Pene-trometer, reaffirmed 1975, IBR ap-proved for § 1926.1002(e).

(l) The following material is avail-able for purchase from the American Society of Mechanical Engineers (ASME), Three Park Avenue, New York, NY 10016; telephone: 1–800–843– 2763; fax: 973–882–1717; e-mail:

infocentral@asme.org; Web site: http:// www.asme.org/:

(1) ASME B30.2–2005, Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist), issued Dec. 30, 2005 (‘‘ASME B30.2–2005’’), IBR approved for § 1926.1438(b).

(2) ASME B30.5–2004, Mobile and Lo-comotive Cranes, issued Sept. 27, 2004 (‘‘ASME B30.5–2004’’), IBR approved for §§ 1926.1414(b); 1926.1414(e); 1926.1433(b).

(3) ASME B30.7–2001, Base-Mounted Drum Hoists, issued Jan. 21, 2002 (‘‘ASME B30.7–2001’’), IBR approved for § 1926.1436(e).

(4) ASME B30.14–2004, Side Boom Tractors, issued Sept. 20, 2004 (‘‘ASME B30.14–2004’’), IBR approved for § 1926.1440(c).

(5) ASME Boiler and Pressure Vessel Code, Section VIII, 1968, IBR approved for §§ 1926.152(i), 1926.306(a), and 1926.603(a).

(6) ASME Power Boilers, Section I, 1968, IBR approved for § 1926.603(a).

(m) The following material is avail-able for purchase from the American Welding Society (AWS), 550 N.W.

LeJeune Road, Miami, Florida 33126;

telephone: 1–800–443–9353; Web site:

http://www.aws.org/:

(1) AWS D1.1/D1.1M:2002, Structural Welding Code—Steel, 18th ed., ANSI ap-proved Aug. 31, 2001 (‘‘AWS D1.1/ D1.1M:2002’’), IBR approved for § 1926.1436(c).

(2) ANSI/AWS D14.3–94, Specification for Welding Earthmoving and Con-struction Equipment, ANSI approved Jun. 11, 1993 (‘‘ANSI/AWS D14.3–94’’), IBR approved for § 1926.1436(c).

(n) The following material is avail-able for purchase from the British Standards Institution (BSI), 389 Chiswick High Road, London, W4 4AL, United Kingdom; telephone: +44 20 8996 9001; fax: +44 20 8996 7001; e-mail:

cservices@bsigroup.com; Web site: http:// www.bsigroup.com/:

(1) BS EN 13000:2004, Cranes—Mobile Cranes, published Jan. 4, 2006 (‘‘BS EN 13000:2004’’), IBR approved for § 1926.1433(c).

(2) BS EN 14439:2006, Cranes—Safety— Tower Cranes, published Jan. 31, 2007 (‘‘BS EN 14439:2006’’), IBR approved for § 1926.1433(c).

(o) The following material is avail-able for purchase from the Bureau of

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00025 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

29 CFR Ch. XVII (7–1–13 Edition) § 1926.6

Reclamation, United States Depart-ment of the Interior, 1849 C Street, NW., Washington DC 20240; telephone:

202–208–4501; Web site: http:// www.usbr.gov/:

(1) Safety and Health Regulations for Construction, Part II, Sept. 1971, IBR approved for § 1926.1000(f).

(p) The following material is avail-able for purchase from the California Department of Industrial Relations, 455 Golden Gate Avenue, San Francisco CA 94102; telephone: (415) 703–5070; e-mail:

info@dir.ca.gov; Web site: http:// www.dir.ca.gov/:

(1) Construction Safety Orders, IBR approved for § 1926.1000(f).

(q)–(t) [Reserved]

(u) The following material is avail-able for purchase from the Federal Highway Administration, United States Department of Transportation, 1200 New Jersey Ave., SE., Washington, DC 20590; telephone: 202–366–4000; Web site: http://www.fhwa.dot.gov/:

(1) Manual on Uniform Traffic Con-trol Devices, Millennium Edition, Dec.

2000, IBR approved for §§ 1926.200(g), 1926.201(a), and 1926.202.

(v) The following material is avail-able for purchase from the General Services Administration (GSA), 1800 F Street, NW., Washington, DC 20405;

telephone: (202) 501–0800; Web site:

http://www.gsa.gov/:

(1) QQ–P–416, Federal Specification Plating Cadmium (Electrodeposited), IBR approved for § 1926.104(e).

(w) The following material is avail-able for purchase from the Institute of Makers of Explosives (IME), 1120 19th Street, NW., Suite 310, Washington, DC 20036; telephone: 202–429–9280; fax: 202– 429–9280; e-mail: info@ime.org; Web site:

http://www.ime.org/:

(1) IME Pub. No. 2, American Table of Distances for Storage of Explosives, Jun. 5, 1964, IBR approved for § 1926.914(a).

(2) IME Pub. No. 20, Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps, Mar. 1968, IBR approved for § 1926.900(k).

(x) The following material is avail-able for purchase from the Inter-national Organization for Standardiza-tion (ISO), 1, ch. de la Voie-Creuse, Case postale 56, CH–1211 Geneva 20, Switzerland; telephone: +41 22 749 01 11;

fax: +41 22 733 34 30; Web site: http:// www.iso.org/:

(1) ISO 11660–1:2008(E), Cranes—Ac-cess, guards and restraints—Part 1:

General, 2d ed., Feb. 15, 2008 (‘‘ISO 11660–1:2008(E)’’), IBR approved for § 1926.1423(c).

(2) ISO 11660–2:1994(E), Cranes—Ac-cess, guards and restraints—Part 2: Mo-bile cranes, 1994 (‘‘ISO 11660–2:1994(E)’’), IBR approved for § 1926.1423(c).

(3) ISO 11660–3:2008(E), Cranes—Ac-cess, guards and restraints—Part 3:

Tower cranes, 2d ed., Feb. 15, 2008 (‘‘ISO 11660–3:2008(E)’’), IBR approved for § 1926.1423(c).

(y) The following material is avail-able for purchase from the National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02169;

telephone: 617–770–3000; fax: 617–770– 0700; Web site: http://www.nfpa.org/:

(1) NFPA 10A–1970, Maintenance and Use of Portable Fire Extinguishers, IBR approved for § 1926.150(c).

(2) NFPA 13–1969, Standard for the In-stallation of Sprinkler Systems, IBR approved for § 1926.152(d).

(3) NFPA 30–1969, The Flammable and Combustible Liquids Code, IBR ap-proved for § 1926.152(c).

(4) NFPA 80–1970, Standard for Fire Doors and Windows, Class E or F Open-ings, IBR approved for § 1926.152(b).

(5) NFPA 251–1969, Standard Methods of Fire Test of Building Construction and Material, IBR approved for §§ 1926.152(b) and 1926.155(f).

(6) NFPA 385–1966, Standard for Tank Vehicles for Flammable and Combus-tible Liquids, IBR approved for § 1926.152(g).

(z) [Reserved]

(aa) The following material is avail-able for purchase from the Power Crane and Shovel Association (PCSA), 6737 W.

Washington Street, Suite 2400, Mil-waukee, WI 53214; telephone: 1–800–369– 2310; fax: 414–272–1170; Web site: http:// www.aem.org/CBC/ProdSpec/PCSA/:

(1) PCSA Std. No. 1, Mobile Crane and Excavator Standards, 1968, IBR ap-proved for § 1926.602(b).

(2) PCSA Std. No. 2, Mobile Hydraulic Crane Standards, 1968 (‘‘PCSA Std. No.

2 (1968)’’), IBR approved for §§ 1926.602(b), 1926.1433(a), and 1926.1501(a).

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00026 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

(3) PCSA Std. No. 3, Mobile Hydraulic Excavator Standards, 1969, IBR ap-proved for § 1926.602(b).

(bb)–(cc) [Reserved]

(dd) The following material is avail-able for purchase from the Society of Automotive Engineers (SAE), 400 Com-monwealth Drive, Warrendale, PA 15096; telephone: 1–877–606–7323; fax: 724– 776–0790; Web site: http://www.sae.org/:

(1) SAE 1970 Handbook, IBR approved for § 1926.602(b).

(2) SAE 1971 Handbook, IBR approved for § 1926.1001(h).

(3) SAE J166–1971, Trucks and Wag-ons, IBR approved for § 1926.602(a).

(4) SAE J168–1970, Protective Enclo-sures—Test Procedures and Perform-ance Requirements, IBR approved for § 1926.1002(a).

(5) SAE J185 (reaf. May 2003), Access Systems for Off-Road Machines, re-affirmed May 2003 (‘‘SAE J185 (May 1993)’’), IBR approved for § 1926.1423(c).

(6) SAE J236–1971, Self-Propelled Graders, IBR approved for § 1926.602(a).

(7) SAE J237–1971, Front End Loaders and Dozers, IBR approved for § 126.602(a).

(8) SAE J319b–1971, Self-Propelled Scrapers, IBR approved for § 1926.602(a).

(9) SAE J320a–1971, Minimum Per-formance Criteria for Roll-Over Protec-tive Structure for Rubber-Tired, Self- Propelled Scrapers, IBR approved for § 1926.1001(h).

(10) SAE J321a–1970, Fenders for Pneumatic-Tired Earthmoving Haulage Equipment, IBR approved for § 1926.602(a).

(11) SAE J333a–1970, Operator Protec-tion for Agricultural and Light Indus-trial Tractors, IBR approved for § 1926.602(a).

(11) SAE J386–1969, Seat Belts for Construction Equipment, IBR approved for § 1926.602(a).

(12) SAE J394–1971, Minimum Per-formance Criteria for Roll-Over Protec-tive Structure for Rubber-Tired Front End Loaders and Robber-Tired Dozers, IBR approved for § 1926.1001(h).

(13) SAE J395–1971, Minimum Per-formance Criteria for Roll-Over Protec-tive Structure for Crawler Tractors and Crawler-Type Loaders, IBR ap-proved for § 1926.1001(h).

(14) SAE J396–1971, Minimum Per-formance Criteria for Roll-Over Protec-tive Structure for Motor Graders, IBR approved for § 1926.1001(h).

(15) SAE J397–1969, Critical Zone Characteristics and Dimensions for Op-erators of Construction and Industrial Machinery, IBR approved for § 1926.1001(f).

(16) SAE J743a–1964, Tractor Mounted Side Boom, 1964 (‘‘SAE J743a–1964’’), IBR approved for § 1926.1501(a).

(17) SAE J959–1966, Lifting Crane Wire-Rope Strength Factors, 1966 (‘‘SAE J959–1966’’), IBR approved for § 1926.1501(a).

(18) SAE J987 (rev. Jun. 2003), Lattice Boom Cranes—Method of Test, revised Jun. 2003 (‘‘SAE J987 (Jun. 2003)’’), IBR approved for § 1926.1433(c).

(19) SAE J1063 (rev. Nov. 1993), Canti-levered Boom Crane Structures—Meth-od of Test, revised Nov. 1993 (‘‘SAE J1063 (Nov. 1993)’’), IBR approved for § 1926.1433(c).

(ee) The following material is avail-able for purchase from the United States Army Corps of Engineers, 441 G Street, NW., Washington, DC 20314;

telephone: 202–761–0011; e-mail: hq-publicaffairs@usace.army.mil; Web site:

http://www.usace.army.mil/:

(1) EM–385–1–1, General Safety Re-quirements, Mar. 1967, IBR approved for § 1926.1000(f).

(ff) The following material is avail-able for purchase from standards re-sellers such as the Document Center Inc., 111 Industrial Road, Suite 9, Bel-mont, CA 94002; telephone: 650–591–7600;

fax: 650–591–7617; e-mail: info@document-center.com; Web site: http:// www.document-center.com/:

(1) ANSI B15.1–1953 (R1958), Safety Code for Mechanical Power-Trans-mission Apparatus, revised 1958, IBR approved for §§ 1926.300(b)(2) and 1926.1501(a).

(2) ANSI B30.2.0–1967, Safety Code for Overhead and Gantry Cranes, approved May 4, 1967, IBR approved for § 1926.1501(d).

(3) ANSI B30.5–1968, Crawler, Loco-motive, and Truck Cranes, approved Dec. 16, 1968, IBR approved for §§ 1926.1433(a), 1926.1501(a), and 1926.1501(b).

VerDate Mar<15>2010 22:32 Aug 15, 2013 Jkt 229119 PO 00000 Frm 00027 Fmt 8010 Sfmt 8010 Q:\29\29V8.TXT ofr150 PsN: PC150

29 CFR Ch. XVII (7–1–13 Edition) § 1926.10

(4) ANSI B30.6–1969, Safety Code for Derricks, approved Dec. 18, 1967, IBR approved for § 1926.1501(e).

[75 FR 48130, Aug. 9, 2010, as amended at 77 FR 37600, June 22, 2012]

EFFECTIVE DATE NOTE: At 78 FR 35567, June 13, 2013, § 1926.6 was amended by revising paragraph (h)(24); redesignating paragraphs (h)(27) through (h)(30) as (h)(31) through (h)(34) and paragraph (u)(1) as (u)(2); adding paragraphs (h)(27) through (h)(30), and (u)(1);

and revising newly redesignated paragraph (u)(2), effective Sept. 11, 2013. For the con-venience of the user, the added and revised text is set forth as follows:

§ 1926.6 Incorporation by reference.

(h) * * *

(24) ANSI Z35.1–1968, Specifications for Ac-cident Prevention Signs; IBR approved for § 1926.200(b), (c), and 1 (i). Copies available for purchase from the IHS Standards Store, 15 Inverness Way East, Englewood, CO 80112;

telephone: 1–877–413–5184; Web site:

www.global.ihs.com.

(27) USA Z53.1–1967 (also referred to as ANSI Z53.1–1967), Safety Color Code for Marking Physical Hazards, ANSI approved October 9, 1967; IBR approved for § 1926.200(c).

Copies available for purchase from the IHS Standards Store, 15 Inverness Way East, En-glewood, CO 80112; telephone: 1–877–413–5184;

Web site: www.global.ihs.com.

(28) ANSI Z535.1–2006(R2011), Safety Colors, reaffirmed July 19, 2011; IBR approved for § 1926.200(c). Copies available for purchase from the International Safety Equipment Association, 1901 North Moore Street, Ar-lington, VA 22209–1762; telephone: 703–525– 1695; fax: 703–528–2148; Web site:

www.safetyequipment.org.

(29) ANSI Z535.2–2011, Environmental and Facility Safety Signs, published September 15, 2011; IBR approved for § 1926.200(b), (c), and (i). Copies available for purchase from the International Safety Equipment Associa-tion, 1901 North Moore Street, Arlington, VA 22209–1762; telephone: 703–525–1695; fax: 703– 528–2148; Web site: www.safetyequipment.org.

(30) ANSI Z535.5–2011, Safety Tags and Bar-ricade Tapes (for Temporary Hazards), pub-lished September 15, 2011, including Errata, November 14, 2011; IBR approved for § 1926.200(h) and (i). Copies available for pur-chase from the International Safety Equip-ment Association, 1901 North Moore Street, Arlington, VA 22209–1762; telephone: 703–525–

1695; fax: 703–528–2148; Web site:

www.safetyequipment.org.

(u) * * *

(1) Manual on Uniform Traffic Control De-vices (MUTCD), Part VI, Standards and Guides for Traffic Controls for Street and Highway Construction, Maintenance, Util-ity, and Incident Management Operation, 1988 Edition, Revision 3, September 3, 1993;

IBR approved…