N64498-17-R-4002_RELEASED.pdf

CODE

(Hour)

PAGE(S)

until 05:00 PM local time 30 Apr 2018

X

A X B X C X D

EX

X

G F 119 - 127

128 - 138 X H 139 - 143

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA FAR (48 CFR) 53.214(c)

1 143

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N64498 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 3 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and

Block 7 conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

2 - 55

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

56 - 86 87 - 89

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

91 - 100

X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 101 - 104 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 105 - 106 X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIONS AND INSTRUCTIONS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

107 - 117

PART II - CONTRACT CLAUSES

NAVAL SURFACE WARFARE CENTER PHILA

CODE 02321, JOHN WOODLAND

215-897-7767 JOHN.WOODLAND@NAVY.MIL

5001 SOUTH BROAD STREET

PHILADELPHIA PA 19112

215-897-7767

FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.5. DATE ISSUED

28 Mar 2018

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N6449817R4002

Section B - Supplies or Services and Prices

MINIMUM QUANTITY: The minimum quantity of supplies to be ordered under this contract shall be $100,000.00. The maximum quantity of supplies to be ordered under this contract shall be the total ceiling price set forth in the resulting contract. Oral orders shall not be authorized under the contract. The maximum amount is not to be exceeded without prior written approval of the Procuring Contracting Officer (PCO).

Note 1: It is the intention of the Government to award a Single Award IDIQ total small business set aside contract.

Note 2: In accordance with FAR 52.215-20, offerors shall submit Other Than Certified Cost or Pricing Data with their proposal submission in order to support the proposal.

Note 3: Part numbers shall be submitted for each Hardware CLIN at time of RFP submittal.

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0001 57 Each 24" Operator Interface Panel (OIP) with Skylake Quad Core CPU IAW Statement of Work

YEAR 1

FOB: Destination

MAX

NET AMT

UNIT UNIT PRICE MAX AMOUNT

0002 57 Each Connector Kit for CLIN 0001

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0003 24 Each 24” Flat Panel Display

To be mounted on single and dual monitor consoles.

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0004 24 Each Connector Kit for CLIN 0003

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0005 42 Each 42” Flat Panel Display

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0006 42 Each Connector Kit for CLIN 0005

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0007 10 Each 46” Flat Panel Display

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0008 10 Each Connector Kit for CLIN 0007

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0009 100 Each Skylake Quad Core Computer

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0010 100 Each Connector Kit for CLIN 0009

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0011 5 Each Sit Down Dual Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0012 5 Each Connector Kit for CLIN 0011

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0013 2 Each Stand Up Dual Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0014 2 Each Connector Kit for CLIN 0013

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0015 2 Each Sit Down Single Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0016 2 Each Connector Kit for CLIN 0015

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0017 2 Each Stand Up Single Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0018 2 Each Connector Kit for CLIN 0017

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0019 55 Each CPU Enclosures

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0020 55 Each Connector Kit for CLIN 0019

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0021 1 Each First Article Testing-Article 1

Assembled Sit Down Dual Monitor Console Items 0003, 0009, 0011 IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0022 1 Each First Article Testing-Article 2

Assembled Standup Down Dual Monitor Console Items 0003, 0009, 0013 IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0023 1 Each First Article Testing-Article 3

Assembled Sit Down Single Monitor Console Items 0003, 0009, 0015 IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0024 1 Each First Article Testing-Article 4

Assembled Standup Single Monitor Console Items 0003, 0009, 0017 IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0025 65 Each 24" OIP with Skylake Quad Core CPU

IAW Statement of Work

YEAR 2

UNIT UNIT PRICE MAX AMOUNT

0026 65 Each Connector Kit for CLIN 0025

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0027 35 Each 24” Flat Panel Display

To be mounted on single and dual monitor consoles.

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0028 35 Each Connector Kit for CLIN 0027

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0029 70 Each 42 Inch Flat Panel Display

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0030 70 Each Connector Kit for CLIN 0029

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0031 30 Each 46 Inch Flat Panel Display

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0032 30 Each Connector Kit for CLIN 0031

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0033 125 Each Skylake Quad Core Computer

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0034 125 Each Connector Kit for CLIN 0033

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0035 5 Each Sit Down Dual Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0036 5 Each Connector Kit for CLIN 0035

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0037 8 Each Stand Up Dual Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0038 8 Each Connector Kit for CLIN 0037

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0039 2 Each Sit Down Single Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0040 2 Each Connector Kit for CLIN 0039

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0041 7 Each Stand Up Single Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0042 7 Each Connector Kit for CLIN 0041

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0043 100 Each CPU Enclosures

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0044 100 Each Connector Kit for CLIN 0043

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0045 65 Each 24" OIP with Skylake Quad Core CPU

IAW Statement of Work

YEAR 3

UNIT UNIT PRICE MAX AMOUNT

0046 65 Each Connector Kit for CLIN 0045

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0047 62 Each 24” Flat Panel Display

To be mounted on single and dual monitor consoles.

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0048 62 Each Connector Kit for CLIN 0047

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0049 70 Each 42” Flat Panel Display

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0050 70 Each Connector Kit for CLIN 0049

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0051 30 Each 46 Inch Flat Panel Display

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0052 30 Each Connector Kit for CLIN 0051

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0053 125 Each Skylake Quad Core Computer

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0054 125 Each Connector Kit for CLIN 0053

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0055 7 Each Sit Down Dual Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0056 7 Each Connector Kit for CLIN 0055

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0057 10 Each Stand Up Dual Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0058 10 Each Connector Kit for CLIN 0057

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0059 5 Each Sit Down Single Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0060 5 Each Connector Kit for CLIN 0059

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0061 7 Each Stand Up Single Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0062 7 Each Connector Kit for CLIN 0061

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0063 100 Each CPU Enclosures

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0064 100 Each Connector Kit for CLIN 0063

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0065 65 Each 24" OIP with Skylake Quad Core CPU

IAW Statement of Work

YEAR 4

UNIT UNIT PRICE MAX AMOUNT

0066 65 Each Connector Kit for CLIN 0065

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0067 62 Each 24” Flat Panel Display

To be mounted on single and dual monitor consoles.

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0068 62 Each Connector Kit for CLIN 0067

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0069 70 Each 42” Flat Panel Display

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0070 70 Each Connector Kit for CLIN 0069

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0071 30 Each 46” Flat Panel Display

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0072 30 Each Connector Kit for CLIN 0071

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0073 125 Each Skylake Quad Core Computer

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0074 125 Each Connector Kit for CLIN 0073

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0075 7 Each Sit Down Dual Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0076 7 Each Connector Kit for CLIN 0075

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0077 10 Each Stand Up Dual Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0078 10 Each Connector Kit for CLIN 0077

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0079 5 Each Sit Down Single Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0080 5 Each Connector Kit for CLIN 0079

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0081 7 Each Stand Up Single Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0082 7 Each Connector Kit for CLIN 0081

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0083 100 Each CPU Enclosures

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0084 100 Each Connector Kit for CLIN 0083

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0085 65 Each 24" OIP with Skylake Quad Core CPU

IAW Statement of Work

YEAR 5

UNIT UNIT PRICE MAX AMOUNT

0086 65 Each Connector Kit for CLIN 0085

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0087 62 Each 24” Flat Panel Display

To be mounted on single and dual monitor consoles.

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0088 62 Each Connector Kit for CLIN 0087

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0089 70 Each 42” Flat Panel Display

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0090 70 Each Connector Kit for CLIN 0089

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0091 30 Each 46” Flat Panel Display

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0092 30 Each Connector Kit for CLIN 0091

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0093 125 Each Skylake Quad Core Computer

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0094 125 Each Connector Kit for CLIN 0093

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0095 7 Each Sit Down Dual Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0096 7 Each Connector Kit for CLIN 0095

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0097 10 Each Stand Up Dual Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0098 10 Each Connector Kit for CLIN 0097

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0099 5 Each Sit Down Single Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0100 5 Each Connector Kit for CLIN 0099

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0101 7 Each Stand Up Single Monitor Console

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0102 7 Each Connector Kit for CLIN 0101

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0103 100 Each CPU Enclosures

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0104 100 Each Connector Kit for CLIN 0103

IAW Statement of Work

UNIT UNIT PRICE MAX AMOUNT

0105 1 Lot Data Requirements

IAW DD Form 1423 A004 through A012 Not Separately Priced.

Grand Total CLINs 0001 through 0104 $_____________________________

CLAUSES INCORPORATED BY FULL TEXT

HQ B-2-0004 EXPEDITING CONTRACT CLOSEOUT (NAVSEA) (DEC 1995)

(a) As part of the negotiated fixed price or total estimated amount of this contract, both the Government and the Contractor have agreed to waive any entitlement that otherwise might accrue to either party in any residual dollar amount of $500 or less at the time of final contract closeout. The term "residual dollar amount" shall include all money that would otherwise be owed to either party at the end of the contract, except that, amounts connected in any way with taxation, allegations of fraud and/or antitrust violations shall be excluded. For purposes of determining residual dollar amounts, offsets of money owed by one party against money that would otherwise be paid by that party may be considered to the extent permitted by law.

(b) This agreement to waive entitlement to residual dollar amounts has been considered by both parties. It is agreed that the administrative costs for either party associated with collecting such small dollar amounts could exceed the amount to be recovered.

HQ B-2-0022 CONTRACT SUMMARY FOR PAYMENT OFFICE (FIXED PRICE) (FEB 1997)

This entire contract is fixed price.

Section C - Descriptions and Specifications

STATEMENT OF WORK

1.0 BACKGROUND

The Statement of Work is in support of a contract for Propulsion Auxiliary Control, Damage Control, and Ballast Control Human-Machined Interfaces (HMI). These HMIs shall be used on U.S. Naval Ships, Military Sealift Command, Army, U.S. Coast Guard and foreign Navy Ships to control and monitor multiple systems. The statement of work also covers CPU enclosures and flat panel computers which are used to display system specific information.

2.0 APPLICABLE HULLS:

・ LSD-41/49

・ LPD-17

・ LHD-1

・ DDG-51

・ USCG

・ FFG (FMS)

・ CVN

・ LCS

・ LHA

・ LCC

・ CG-47

・ ARMY VESSELS

3.0 GENERAL SPECIFICATIONS

・ Operator Interface Panel (OIP)

General Specification:

The operator interface panel shall consist of a complete integral unit with a hinged bezel for maintenance efforts. Bezel must be able to be physically secured.

Environmental Specifications:

・ Shock: MIL-S-901D Grade A, Class 1, Type A (CDRLs A004-A007)

・ Vibration: MIL-STD-167-1, Type 1 (CDRLs A004, A011)

・ EMI/EMC:

Threshold: MIL-STD-461E (surface ship, below deck) Objective: MIL-STD-461G (surface ship, below deck)

・ Operating Temp:

Threshold: MIL-STD-810G (0・- 60・C) (32・- 140・F) (Test to maximum days suggested in MIL-STD for max temperature and max load) Objective: MIL-STD-810G (-10° - 70°C) (14° - 158°F) (Test to 30 days at max temperature and max load)

・ Storage Temp:

Threshold: MIL-STD-810E (-20・– 85・C) (-4・- 185・F)

Objective: MIL-STD-810G (-20・– 85・C) (-4・- 185・F)

・ Operating Humidity:

Threshold: MIL-STD-810E (0-95% non-condensing)

・ Storage Humidity:

Threshold: MIL-STD-810G 0-95% non-condensing Objective: MIL-STD-810G 0-100% non-condensing

・ Power: MIL-STD-1399

・ Flat Panel Displays Only

General Specification:

The Flat Panel Display shall consist of a display only.

Environmental Specifications:

・ EMI/EMC:

Threshold: MIL-STD-461E (surface ship, below deck) Objective: MIL-STD-461G (surface ship, below deck)

・ Operating Temp:

Threshold: MIL-STD-810G (0・- 50・C) (32・- 122・F) (Test to maximum days suggested in MIL-STD for max temperature and max load)

・ Objective: MIL-STD-810G (-10° - 70°C) (14° - 158°F) (Test to 30 days at max temperature and max load)

・ Storage Temp:

Threshold: MIL-STD-810E (-20・– 85・C) (-4・- 185・F)

Objective: MIL-STD-810G (-20・– 85・C) (-4・- 185・F)

・ Operating Humidity:

Threshold: MIL-STD-810E (0-95% non-condensing)

・ Storage Humidity:

Threshold: MIL-STD-810G 0-95% non-condensing

・ Military Computers

The computers shall be fanless, passively cooled, completely solid state without a display. Computers shall be qualified to MIL-S-901D Grade A Shock, MIL-STD-167 Vibration, and MIL-STD-461F for EMI.

・ EMI/EMC:

Threshold: MIL-STD-461E (surface ship, below deck) Objective: MIL-STD-461G (surface ship, below deck)

・ Operating Temp:

Threshold: MIL-STD-810G (0・・- 60・C) (32・・- 140・F) (Test to maximum days suggested in MIL-STD for max temperature and max load) Objective: MIL-STD-810G (-10° - 70°C) (14° - 158°F) (Test to 30 days at max temperature and max load)

・ Storage Temp:

Threshold: MIL-STD-810E (-20・・– 85・C) (-4・- 185・F)

Objective: MIL-STD-810G (-20・・– 85・C) (-4・- 185・F)

・ Operating Humidity:

Threshold: MIL-STD-810E (0-95% non-condensing)

・ Storage Humidity:

Threshold: MIL-STD-810G 0-95% non-condensing Objective: MIL-STD-810G 0-100% non-condensing

・ Power: MIL-STD-1399

Electrical Specifications:

Power Supply: 24VDC Input Supply: 90 to 132 VAC Single Phase Line Frequency: Nominal 60Hz Power Consumption: 5 Amps

・ Sit Down Dual Monitor Console

The consoles shall be fanless. The consoles shall be qualified to MIL-S-901D Grade A Shock, MIL-STD-167 Vibration, and MIL-STD-461F for EMI. Console shall have 24” touch screen capable monitors and room for mounting solid state computer in base.

・ EMI/EMC:

Threshold: MIL-STD-461E (surface ship, below deck) Objective: MIL-STD-461G (surface ship, below deck)

・ Operating Temp:

Threshold: MIL-STD-810G (0・・- 60・C) (32・・- 140・F) (Test to maximum days suggested in MIL-STD for max temperature and max load) Objective: MIL-STD-810G (-10° - 70°C) (14° - 158°F) (Test to 30 days at max temperature and max load)

・ Storage Temp:

Threshold: MIL-STD-810E (-20・・– 85・C) (-4・- 185・F)

Objective: MIL-STD-810G (-20・・– 85・C) (-4・- 185・F)

・ Operating Humidity:

Threshold: MIL-STD-810E (0-95% non-condensing)

・ Storage Humidity:

Threshold: MIL-STD-810G 0-95% non-condensing Objective: MIL-STD-810G 0-100% non-condensing Power: MIL-STD-1399

Maximum Overall Dimensions Not Including Deck Mounted Chair:

Width: 26” Height: 65” *not including foundation Depth: 28”

Electrical Specifications:

Input Supply: 90 to 132 VAC Single Phase

Power Consumption: 10 Amps

・ Standup Dual Monitor Console

The consoles shall be fanless. The consoles shall be qualified to MIL-S-901D Grade A Shock, MIL-STD-167 Vibration, and MIL-STD-461F for EMI. Console shall have 24” touch screen capable monitors and room for

・ EMI/EMC:

Threshold: MIL-STD-461E (surface ship, below deck) Objective: MIL-STD-461G (surface ship, below deck)

・ Operating Temp:

Threshold: MIL-STD-810G (0・・- 60・C) (32・・- 140・F) (Test to maximum days suggested in MIL-STD for max temperature and max load) Objective: MIL-STD-810G (-10° - 70°C) (14° - 158°F) (Test to 30 days at max temperature and max load)

・ Storage Temp:

Threshold: MIL-STD-810E (-20・・– 85・C) (-4・- 185・F)

Objective: MIL-STD-810G (-20・・– 85・C) (-4・- 185・F)

・ Operating Humidity:

Threshold: MIL-STD-810E (0-95% non-condensing)

・ Storage Humidity:

Threshold: MIL-STD-810G 0-95% non-condensing Objective: MIL-STD-810G 0-100% non-condensing

・ Power: MIL-STD-1399

Maximum Overall Dimensions:

Width: 26” Height: 65” *not including foundation Depth: 28”

Electrical Specifications:

Input Supply: 90 to 132 VAC Single Phase

・ Sit Down Single Monitor Console

The consoles shall be fanless. The consoles shall be qualified to MIL-S-901D Grade A Shock, MIL-STD-167

Vibration, and MIL-STD-461F for EMI. Console shall have 24” touch screen capable monitors and room for

Environmental Specifications:

・ Shock: MIL-S-901D Grade A, Class 1, Type A (CDRLs A004-A007)

・ Vibration: MIL-STD-167-1, Type 1 (CDRLs A004, A011)

・ EMI/EMC:

Threshold: MIL-STD-461E (surface ship, below deck) Objective: MIL-STD-461G (surface ship, below deck)

・ Operating Temp:

Threshold: MIL-STD-810G (0・・- 60・C) (32・・- 140・F) (Test to maximum days suggested in MIL-STD for max temperature and max load) Objective: MIL-STD-810G (-10° - 70°C) (14° - 158°F) (Test to 30 days at max temperature and max load)

・ Storage Temp:

Threshold: MIL-STD-810E (-20・・– 85・C) (-4・- 185・F)

Objective: MIL-STD-810G (-20・・– 85・C) (-4・- 185・F)

・ Operating Humidity:

Threshold: MIL-STD-810E (0-95% non-condensing)

・ Storage Humidity:

Threshold: MIL-STD-810G 0-95% non-condensing Objective: MIL-STD-810G 0-100% non-condensing

・ Power: MIL-STD-1399

Maximum Overall Dimensions Not Including Deck Mounted Chair:

Width: 26” Height: 47” *not including foundation Depth: 28”

Electrical Specifications:

Input Supply: 90 to 132 VAC Single Phase

・ Standup Single Monitor Console

The consoles shall be fanless. The consoles shall be qualified to MIL-S-901D Grade A Shock, MIL-STD-167 Vibration, and MIL-STD-461F for EMI. Console shall have 24” touch screen capable monitors and room for

・ EMI/EMC:

Threshold: MIL-STD-461E (surface ship, below deck) Objective: MIL-STD-461G (surface ship, below deck)

・ Operating Temp:

Threshold: MIL-STD-810G (0・・- 60・C) (32・・- 140・F) (Test to maximum days suggested in MILSTD for max temperature and max load) Objective: MIL-STD-810G (-10° - 70°C) (14° - 158°F) (Test to 30 days at max temperature and max load)

・ Storage Temp:

Threshold: MIL-STD-810E (-20・・– 85・C) (-4・- 185・F)

Objective: MIL-STD-810G (-20・・– 85・C) (-4・- 185・F)

・ Operating Humidity:

Threshold: MIL-STD-810E (0-95% non-condensing)

・ Storage Humidity:

Threshold: MIL-STD-810G 0-95% non-condensing Objective: MIL-STD-810G 0-100% non-condensing

・ Power: MIL-STD-1399

Maximum Overall Dimensions:

Width: 26” Height: 47” *not including foundation Depth: 28”

Electrical Specifications:

Input Supply: 90 to 132 VAC Single Phase

・ CPU Enclosures

The computers shall be fanless, passively cooled, completely solid state without a display. Computers shall be qualified to MIL-S-901D Grade A Shock, MIL-STD-167 Vibration, and MIL-STD-461F for EMI. Shall be bulkhead mounted.

・ EMI/EMC:

Threshold: MIL-STD-461E (surface ship, below deck) Objective: MIL-STD-461G (surface ship, below deck)

・ Operating Temp:

Threshold: MIL-STD-810G (0・・- 60・C) (32・・- 140・F)

(Test to maximum days suggested in MIL-STD for max temperature and max load) Objective: MIL-STD-810G (-10° - 70°C) (14° - 158°F) (Test to 30 days at max temperature and max load)

・ Storage Temp:

Threshold: MIL-STD-810E (-20・・– 85・C) (-4・- 185・F)

Objective: MIL-STD-810G (-20・・– 85・C) (-4・- 185・F)

・ Operating Humidity:

Threshold: MIL-STD-810E (0-95% non-condensing)

・ Storage Humidity:

Threshold: MIL-STD-810G 0-95% non-condensing

・ Power: MIL-STD-1399

Enclosure Specifications:

Enclosure size needed: 16” x 16” x 8” (W x H x D) max

NEMA 4X

Maximum Weight with internal components:

55 LBS

Electrical Specifications:

Input Supply: 90 to 132 VAC Single Phase

Power Consumption: 5 Amps

4.0 INDIVIDUAL ITEM SPECIFICATIONS:

• Operator Interface Panel (OIP) All OIPs must meet the general specifications listed in section 3.0.

Items 0001, 0025, 0045, 0065 & 0085:

24" OIP with Skylake Quad Core CPU

・ Standard Equipment Specifications:

・ Enclosure:

Threshold: IP65 Objective: IP67 Cooling: passive (no moving parts) Must be lockable

・ Display Type: LCD Display with LED Backlight

・ Backlight: LED

・ Pointer: bezel mounted pointer with right & left click buttons

・ Touch Screen:

Threshold: Single touch resistive 5 wire or greater Objective: Dual touch resistive 5+ wire Resolutions: native 1920x1080 Glass: 2.8mm Tempered Glass Min Viewing Angle: 85° Horizontal &Vertical

・ Brightness:

Threshold: 0-125 nits Objective: 0-300 nits Default: 110 nits Brightness Control:

Threshold: 0-100% linear Objective: 0-100% logarithmic

・ Colors:

Threshold: 16 Million (24 bit) Objective: 16+ Million (32 bit) Contrast Ratio (absolute / not dynamic):

Threshold: 300:1 Objective: greater than 1000:1 Material: 0.125” Aluminum 5052-H32 Alloy. All aluminum must be chemically treated IAW MIL-DTL 5541, Type II, Class 1A to provide maximum protection against corrosion. Material must not contain hexavalent chromium.

Weight:

Threshold: 50lbs without any mounts; Less than 60lbs with all hardware Objective: 45lbs without any mounts; Less than 55lbs with all hardware Max Power Consumption:

Threshold: 90W Objective: less than 45W Max Width:

Threshold: 26” Objective: 23.0” Max Height:

Threshold: 18” Objective: 14.7” Max Depth:

Threshold: 8” Objective: 2.9”

Foundation:

Tilt Angle: 15 ° Up/Down:

Material: .187” Aluminum Plate, Max Weight: 22 lbs

・ Electrical & I/O Ports:

USB: Support for a minimum of four (4) USB 3.0 and two (2) USB 2.0 ports.

Connector: Respective Amphenol connector for power and network cables Fiber Ethernet: Support for a minimum of two (2) 1000BaseLX, 100BaseFX, or 1000BaseSX native (i.e. no media converters) fiber network interfaces Copper Ethernet: Support for a minimum of three (3) 10/100/1000BaseTX native copper network interfaces Isolated GPIO/DIO: Support for a minimum of four (4) DI and four (4) DO Cap: mating metal cap

・ Power:

Voltage: 90-264VAC Rating: 2x max power consumption Connector: MS27656T15B5P Current 2.7A max @ 115VAC On/Off Switch: Toggle Switch STDP, 15A, Water Tight Fusing: 2 internal fuses (5A); delta/wye power

・ Standard Features:

CPU: Intel® Skylake Series Quad-Core i7; 3.4 GHz (Optional i3/i5) with TPM 1.2 or Greater Memory:

Threshold: 16GB RAM (single DIMM low power) Objective: 32GB RAM (single DIMM low power)or greater Video: Integrated AGP Controller Sound: Integrated Audio USB: Support for a minimum of four (4) USB 3.0 and two (2) USB 2.0 ports.

Fiber Ethernet: Support for a minimum of two (2) 1000BaseLX, 100BaseFX, or 1000BaseSX native (i.e. no media converters) fiber network interfaces Copper Ethernet: Support for a minimum of three (3) 10/100/1000BaseTX native copper network interfaces Isolated GPIO/DIO: Support for a minimum of four (4) DI and four (4) DO BIOS: Must allow administrator lockout of USB ports. Must allow administrator password access.

Speaker: Minimum 90dB (Minimum volume control shall not be less than 10dB) 2 Solid State Drives with power fail write protection Size: minimum 300 GB Type: Intel Wide-Temp SSD or equivalent, User-Accessible Imaging:

Computers shall be compatible with Windows 7 Embedded, Windows 10 IOT, Red Hat Linux 7.x or newer.

• Connector Kit Items 0002, 0026, 0046, 0066 & 0086:

Connector Kit for item 0001

• Flat Panel Displays Items 0003, 0027, 0047, 0067 &0087:

24” Flat Panel Display To be mounted on single and dual monitor consoles

・ Environmental Specifications:

Shock: MIL-S-901D Grade A Class 1, Type A

・ Standard Equipment Specifications:

・ Enclosure:

Threshold: IP54 back, IP65 front Objective: IP65 Cooling: passive (no moving parts)

・ Display Type: Non Plasma

Backlight: LED Touch Screen:

Threshold: Single touch resistive 5 wire or greater Objective: Dual touch resistive 5+ wire

・ Resolutions:

Threshold: native 1920 x 1080 Objective: 4K

・ Brightness:

Threshold: 0-125 nits Objective: 0-500 nits Default: 150 nits

・ Brightness Control:

Threshold: 0-100% linear Objective: 0-100% logarithmic

・ Colors:

Threshold: 16 Million (8 bit) Objective: 16 Million (16 bit) Contrast Ratio (absolute / not dynamic): 1000:1 Glass: 2.8mm Tempered Glass Min Viewing Angle: 85° Horizontal &Vertical

・ Electrical & I/O Ports:

USB Port: Standard A-B USB 2.0 for touch interface Video input: (1) VGA, (1) HDMI, or (1) Display Port (Must be able to transfer audio through same cable)

・ Power:

Voltage: 85-264VAC

・ Standard Features:

Speaker: 110db at 2 feet orthogonal to display (Sound will pass through either through HDMI or Display port)

Items 0004, 0028, 0048, 0068 & 0088:

Connector Kit for item 0003

• Flat Panel Display Items 0005, 0029, 0049, 0069 & 0089:

42” Flat Panel Display Environmental Specifications:

Shock: MIL-S-901D Grade A, Class 1, Type A

・ Standard Equipment Specifications:

・ Enclosure:

Objective: IP54 Back, IP65 Front Cooling: passive (no moving parts) Display Type: Non Plasma Backlight: LED

・ Touch Screen:

Objective: IR multi-touch capable

・ Resolutions:

Threshold: native 1920 x 1080 Objective: 4K

・ Brightness:

Threshold: 0-125 nits Objective: 0-500 nits Default: 150 nits

・ Brightness Control:

Threshold: 0-100% linear Objective: 0-100% logarithmic

・ Colors:

Threshold: 16 Million (8 bit) Objective: 16+ Million (16 bit) Contrast Ratio (absolute / not dynamic): 1000:1 Glass: 2.8mm Tempered Glass Min Viewing Angle: 85° Horizontal &Vertical

・ Electrical & I/O Ports:

USB Port: (1) standard A-B USB 2.0 for touch interface Video input: (1) VGA, (1) HDMI or (1) Display port (must be able to transfer Audio through same cable)

・ Power:

Voltage: 85-264VAC

・ Standard Features:

Speaker: 110db at 2 feet orthogonal to display (Sound will pass through either through HDMI or Display port)

・ Foundation:

Tilt Angle: 15 ° Up/Down:

Material: .187” Aluminum Plate, Max Weight: 50 lbs

Items 0006, 0030, 0050, 0070 & 0090:

Connector Kit for item 0005

• Flat Panel Display Items 0007, 0031, 0051, 0071 & 0091:

46” Flat Panel Display

Environmental Specifications:

Shock: MIL-S-901D Grade A, Class 1, Type A

・ Standard Equipment Specifications:

・ Enclosure:

Threshold: IP54 Back, IP65 Front Objective: IP65 Cooling: passive (no moving parts) Display Type: Non Plasma Backlight: LED

・ Touch Screen:

Objective: IR multi-touch capable

・ Resolutions:

Threshold: native 1920X1080 Objective: 4K

・ Brightness:

Threshold: 0-125 nits Objective: 0-500 nits Default: 150 nits Brightness Control:

Threshold: 0-100% linear Objective: 0-100% logarithmic

・ Colors:

Threshold: 16 Million (8 bit) Objective: 16+ Million (16 bit) Contrast Ratio (absolute / not dynamic): 1000:1 Glass: 2.8mm Tempered Glass Min Viewing Angle: 85° Horizontal &Vertical

・ Electrical & I/O Ports:

USB Port: Standard A-B USB 2.0 for touch interface Video input: (1) VGA, (1) HDMI or (1) Display port (must be able to transfer Audio through same cable)

・ Power:

Voltage: 85-264VAC

・ Standard Features:

Speaker: 90db at 2 feet orthogonal to display(Sound will pass through either through HDMI or Display port)

・ Foundation:

Tilt Angle: 15 ° Up/Down Material: .187” Aluminum Plate, Max Weight: 100 lbs

Items 0008, 0032, 0052, 0072 & 0092:

Connector Kit for item 0007

• Military Computers All Military Computers must meet the general specifications listed in section 3.0.

Items 0009, 0033, 0053, 0073 & 0093:

Skylake Quad Core Computer

Environmental Specifications:

Shock: MIL-S-901D Grade A, Class 1, Type A

・ Standard Equipment Specifications:

・ Enclosure:

Threshold: IP65 Objective: IP67 Cooling: passive (no moving parts) Weight:

Threshold: 7lbs Objective: 4lbs Max Power Consumption:

Threshold: 90W Objective: less than 31W Max Width:

Threshold: 12” Objective: 10” Max Height:

Threshold: 5” Objective: 1.5” Max Depth:

Threshold: 7” Objective: 5”

・ Electrical & I/O Ports:

USB: Support for a minimum of four (4) USB 3.0 and two (2) USB 2.0 ports.

Fiber Ethernet: Support for a minimum of two (2) 1000BaseLX, 100BaseFX, or 1000BaseSX native (i.e. no media converters) fiber network interfaces Copper Ethernet: Support for a minimum of three (3) 10/100/1000BaseTX native copper network interfaces Isolated GPIO/DIO: Support for a minimum of four (4) DI and four (4) DO

・ Power:

Voltage: 85-264VAC Rating: 2x max power consumption Power Connector: 2-pin Terminal Block: V+, VOn/ Off Switch: Push Button Input Power: 12V-36 VDC

・ Standard Features:

CPU: Intel® Core™ i7 Skylake Series Processor up to 3.4GHz (Optional i3/i5) with TPM 1.2 or Greater Memory:

Threshold: 16GB RAM (single DIMM low power) Objective: 32GB RAM (single DIMM low power) Video: Integrated AGP Controller Video Output: Minimum (1) VGA and (1) HDMI or (1) Display port (must be able to transfer Audio through same cable) Sound: Integrated Audio Ethernet: Dual Gigabit Copper BIOS: Must allow administrator lockout of USB ports. Must allow administrator password access.

CFast: 64 GB Wide-Temp CFast card, User-Accessible Capability of two (2) Solid State Drives with power fail write protection in RAID 1:

Size:

Threshold: minimum 300 GB Objective: 1 TB Type: Intel Wide-Temp SSD or equivalent Imaging:

Computers shall be compatible with Windows 7 Embedded, Windows 10 IOT, Red Hat Linux 7.x or newer.

Items 0010, 0034, 0054, 0074 & 0094:

Connector Kit for item 0009

• Sit Down Dual Monitor Consoles Items 0011, 0035, 0055, 0075 & 0095:

Sit Down Dual Monitor Console

All Sit Down Dual Monitor Consoles must meet the general specifications listed in section 3.0.

Shock: MIL-S-901D Grade A, Class 1, Type A

Threshold: IP54 for Console, IP65 for front and Keyboard/Trackball Objective: IP65

・ Weight: Not to exceed 300 lbs

・ Console dimensions shall not exceed 26” x 65” x 28” (WxHxD) including keyboard and trackball extended)

・ Keyboard:

・ Shall have full function USB(84 keys)

・ Rugged NEMA 4 Compliant

・ Built-in Rugged trackball

・ Monitors:

・ Item 0003 shall be attached to sit down dual console

・ Lower monitor shall mount at a 110 degree viewing angle

・ Upper monitor shall mount at a 75 degree viewing angle

・ Computer:

・ Shall be compatible with integrating Item 0009 into consoles’ lower bay.

・ Housing/Mounting:

・ The console shall employ a “hard mount” configuration without the use of shock isolation mounts

・ The color of the enclosures shall be in accordance with FED-STD-595B, No. 26307 light equipment gray. Alternatively, a gray shade may be utilized to match equipment provided the contractor provides the documented color number and sample in advance for NSWCPD approval.

・ As required, the console enclosure shall provide sufficient ventilation/cooling for all internal components and cabling while adhering to the listed environmental requirements.

No moving Parts, no fans.

・ Any internal console cabling shall be installed in a secure fashion and shall not impede access to internal components.

・ The console configuration shall provide adequate access for normal maintenance of the enclosed components and peripherals. Locking access is required.

・ In the case where enclosure penetrations are required for external cabling (power, network, etc.), adequate, bulkhead-type, sealed cable penetrations (Roxtec) shall be used for external cabling. All penetrations shall be made at the rear vertical panel no more than 6” from the bottom base and shall not preclude compliance with the referenced environmental requirements.

・ Enclosure identification nameplates: An identification nameplate label shall be secured to the inside console access door. In accordance with MIL-DTL-15024F Type E, this nameplate shall be fabricated from a MIL-M-43719 Type I adhesive backed film adhered to aluminum alloy sheet. Lettering shall be screen or litho print and contain, as a minimum, the following information:

: Manufacturer’s part number.

: Serial number.

: Manufacturer’s name and code identification number.

: Salient design characteristics (power voltage, current, frequency, phase, wattage rating, weight, etc.)

: Procurement Specification number.

: U. S. Navy Property.

・ Power:

・ A power distribution unit (PDU) shall be installed

・ Shall have Power receptacles inside base to allow hook up for computers and monitors

・ Voltage: 85-264VAC

・ Shall not exceed overall dimensions of console for WxD of 26” x 28”

Items 0012, 0036, 0056, 0076 & 0096:

Connector Kit for Item 0011

• Stand Up Dual Monitor Console Items 0013, 0037, 0057, 0077 & 0097:

Stand Up Dual Monitor Console

All Stand Up Dual Monitor Consoles must meet the general specifications listed in section 3.0.

Environmental Specifications:

Shock: MIL-S-901D Grade A, Class 1, Type A

・ Standard Equipment Specifications:

Threshold: IP54 for Console, IP65 for front and Keyboard/Trackball Objective: IP65

・ Weight: Not to exceed 300 lbs

・ Console dimensions shall not exceed 26” x 65” x 28” (WxHxD) including keyboard and trackball extended)

・ Keyboard:

・ Shall have full function USB(84 keys)

・ Rugged NEMA 4 Compliant

・ Built-in Rugged trackball

・ Monitors:

・ Item 0003 shall attached to Stand Up dual console

・ Lower monitor shall mount at a 110 degree viewing angle

・ Upper monitor shall mount at a 90 degree viewing angle

・ Computer:

・ Shall be compatible with integrating Item 0009 into consoles’ lower bay.

・ Housing/Mounting:

・ The console shall employ a “hard mount” configuration without the use of shock isolation mounts

・ The color of the enclosures shall be in accordance with FED-STD-595B, No. 26307 light equipment gray. Alternatively, a gray shade may be utilized to match equipment provided the contractor provides the documented color number and sample in advance for NSWCPD approval.

・ As required, the console enclosure shall provide sufficient ventilation/cooling for all internal components and cabling while adhering to the listed environmental requirements.

No moving Parts, no fans.

・ Any internal console cabling shall be installed in a secure fashion and shall not impede access to internal components.

・ The console configuration shall provide adequate access for normal maintenance of the enclosed components and peripherals. Locking access is required.

・ In the case where enclosure penetrations are required for external cabling (power, network, etc.), adequate, bulkhead-type, sealed cable penetrations (Roxtec) shall be used for external cabling. All penetrations shall be made at the rear vertical panel no more than 6” from the bottom base and shall not preclude compliance with the referenced environmental requirements.

・ Enclosure identification nameplates: An identification nameplate label shall be secured to the inside console access door. In accordance with MIL-DTL-15024F Type E, this nameplate shall be fabricated from a MIL-M-43719 Type I adhesive backed film adhered to aluminum alloy sheet. Lettering shall be screen or litho print and contain, as a minimum, the following information:

: Manufacturer’s part number.

: Serial number.

: Manufacturer’s name and code identification number.

: Salient design characteristics (power voltage, current, frequency, phase, wattage rating, weight, etc.)

: Procurement Specification number.

: U. S. Navy Property.

・ Power:

・ A power distribution unit (PDU) shall be installed

・ Shall have Power receptacles inside base to allow hook up for computers and monitors

・ Voltage: 85-264VAC

Items 0014, 0038, 0058, 0078 & 0098:

Connector Kit for Item 0013

• Sit Down Single Monitor Console

Items 0015, 0039, 0059, 0079 & 0099:

Sit Down Single Monitor Console

All Sit Down Monitor Consoles must meet the general specifications listed in section 3.0.

Environmental Specifications:

Shock: MIL-S-901D Grade A, Class 1, Type A

・ Standard Equipment Specifications:

Threshold: IP54 for Console, IP65 for front and Keyboard/Trackball Objective: IP65

・ Weight: Not to exceed 250 lbs

・ Console dimensions shall not exceed 26” x 47” x 28” (WxHxD) including keyboard and trackball extended)

・ Keyboard:

・ Shall have full function USB(84 keys)

・ Rugged NEMA 4 Compliant

・ Built-in Rugged trackball

・ Monitors:

・ Item 0003 shall attached to console

・ Monitor shall mount at a 110 degree viewing angle

・ Computer:

・ Shall be compatible with integrating Item 0009 into consoles’ lower bay.

・ Housing/Mounting:

・ The console shall employ a “hard mount” configuration without the use of shock isolation mounts

・ The color of the enclosures shall be in accordance with FED-STD-595B, No. 26307 light equipment gray. Alternatively, a gray shade may be utilized to match equipment provided the contractor provides the documented color number and sample in advance for NSWCPD approval.

・ As required, the console enclosure shall provide sufficient ventilation/cooling for all internal components and cabling while adhering to the listed environmental requirements.

No moving parts, no fans.

・ Any internal console cabling shall be installed in a secure fashion and shall not impede access to internal components.

・ The console configuration shall provide adequate access for normal maintenance of the enclosed components and peripherals. Locking access is required.

・ In the case where enclosure penetrations are required for external cabling (power, network, etc.), adequate, bulkhead-type, sealed cable penetrations (Roxtec) shall be used for external cabling. All penetrations shall be made at the rear vertical panel no more than 6” from the bottom base and shall not preclude compliance with the referenced environmental requirements.

・ Enclosure identification nameplates: An identification nameplate label shall be secured to the inside console access door. In accordance with MIL-DTL-15024F Type E, this nameplate shall be fabricated from a MIL-M-43719 Type I adhesive backed film adhered to aluminum alloy sheet. Lettering shall be screen or litho print and contain, as a minimum, the following information:

: Manufacturer’s part number.

: Serial number.

: Manufacturer’s name and code identification number.

: Salient design characteristics (power voltage, current, frequency, phase, wattage rating, weight, etc.)

: Procurement Specification number.

: U. S. Navy Property.

・ Power:

・ A power distribution unit (PDU) shall be installed

・ Shall have Power receptacles inside base to allow hook up for computers and monitors

・ Voltage: 85-264VAC

Items 0016, 0040, 0060, 0080 & 0100:

Connector Kit for Item 0015

• Stand Up Single Monitor Console Items 0017, 0041, 0061, 0081 & 0101:

Stand Up Single Monitor Console

All Stand Up Monitor Consoles must meet the general specifications listed in section 3.0.

Environmental Specifications:

Shock: MIL-S-901D Grade A, Class 1, Type A

Threshold: IP54 for Console, IP65 for front and Keyboard/Trackball

Objective: IP65

・ Weight: Not to exceed 250 lbs

・ Console dimensions shall not exceed 26” x 47” x 28” (WxHxD) including keyboard and trackball extended)

・ Keyboard:

・ Shall have full function USB(84 keys)

・ Rugged NEMA 4 Compliant

・ Built-in Rugged trackball

・ Monitors:

・ Item 0003 shall attached to console

・ Monitor shall mount at a 110 degree viewing angle

・ Computer:

・ Shall be compatible with integrating Item 0009 into consoles’ lower bay.

・ Housing/Mounting:

・ The console shall employ a “hard mount” configuration without the use of shock isolation mounts

・ The color of the enclosures shall be in accordance with FED-STD-595B, No. 26307 light equipment gray. Alternatively, a gray shade may be utilized to match equipment provided the contractor provides the documented color number and sample in advance for NSWCPD approval.

・ As required, the console enclosure shall provide sufficient ventilation/cooling for all internal components and cabling while adhering to the listed environmental requirements.

No moving parts, no fans.

・ Any internal console cabling shall be installed in a secure fashion and shall not impede access to internal components.

・ The console configuration shall provide adequate access for normal maintenance of the enclosed components and peripherals. Locking access is required.

・ In the case where enclosure penetrations are required for external cabling (power, network, etc.), adequate, bulkhead-type, sealed cable penetrations (Roxtec) shall be used for external cabling. All penetrations shall be made at the rear vertical panel no more than 6” from the bottom base and shall not preclude compliance with the referenced environmental requirements.

・ Enclosure identification nameplates: An identification nameplate label shall be secured to the inside console access door. In accordance with MIL-DTL-15024F Type E, this nameplate shall be fabricated from a MIL-M-43719 Type I adhesive backed film adhered to aluminum alloy sheet. Lettering shall be screen or litho print and contain, as a minimum, the following information:

: Manufacturer’s part number.

: Serial number.

: Manufacturer’s name and code identification number.

: Salient design characteristics (power voltage, current, frequency, phase, wattage rating, weight, etc.)

: Procurement Specification number.

: U. S. Navy Property.

・ Power:

・ A power distribution unit (PDU) shall be installed

・ Shall have Power receptacles inside base to allow hook up for computers and monitors

・ Voltage: 85-264VAC

Items 0018, 0042, 0062, 0082 & 0102:

Connector Kit for Item 0017

• CPU Enclosures

Items 0019, 0043, 0063, 0083 & 0103:

CPU Enclosures

All CPU Enclosures must meet the general specifications listed in section 3.0.

Enclosures shall be lockable with a key.

・ Standard Equipment Specifications:

・ Enclosure:

Threshold: IP64 Objective: IP65 Cooling: passive (no moving parts) Weight:

Threshold: 55lbs without any mounts Objective: 45lbs without any mounts Max Power Consumption:

Threshold: 90W Objective: less than 45W

・ Electrical & I/O Ports: Hole penetrations to be made by AIT

・ Power:

Voltage: 90-264VAC Rating: 2x max power consumption Connector: respective Amphenol Connectors Current 2.7A max @ 115VAC On/Off Switch: Toggle Switch STDP, 15A, Water Tight Fusing: 2 internal fuses (5A); delta/wye power

・ CPU

Shall house and mount item 0009 military computers with respective connector kits

・ Foundation:

Flush mount on bulkhead Max Weight: 30 lbs

Items 0020, 0044, 0064, 0084 & 0104:

Connector Kit for Item 0019

5.0 Responsibilities

・ Contractor Responsibilities

・The contractor shall provide warranty services base on standard commercial practices. These warranty services shall include telephone support and parts exchange.

・ All equipment provided by contractor shall have the proper qualifications (not “designed to meet”) to Environmental standards per item listed. All qualification reports shall be provided to NSWCPD for approval. See CDRLs A004-A007 and A011

・ Shall provide Tech Manuals and technical drawings. See CDRLs A008-A010

・ The Contractor shall provide periodic progress reports on the construction of equipment and drawing delivery status. This report should detail number of enclosures completed and tested, list all engineering drawings under development, and provide completion percentage versus time expired.

See CDRLs A004-A012

・ Government Furnished Information

・ Additional information, beyond that included in this performance specification, will be furnished by the government on an as needed and if available basis. The Contractor shall identify the need for additional information. Inability of the government to make available the requested information shall not be cause for the Contractor to depart from the requirements of this performance specification.

The Government provides GFI in good faith; but if the Contractor finds any discrepancies with the GFI, it is the Contractor’s responsibility to notify the Government immediately.

6.0 First Article Testing

First Article Qualification Test Plan and Procedures (CDRL A006, A007, A008, A012)

・ Contractor will be tasked to perform First Article Qualifications for Items 0003, 0009, 0011, 0013, 0015, & 0017

・ Qualifications shall be in accordance with environmental specifications listed above per item.

・ NSWCPD will provide funding only for test material and initial testing on these specific items. The Government will not provide funding for any additional tests on other materials.

Item 0021: Article 1 – Assembled Sit Down Dual Monitor Console

・ Is applicable to Items 0003, 0009, 0011

Item 0022: Article 2 – Assembled Standup Down Dual Monitor Console

・ Is applicable to Items 0003, 0009, 0013

Item 0023: Article 3 – Assembled Sit Down Single Monitor Console

・Is applicable to Items 0003, 0009, 0015

Item 0024: Article 4 – Assembled Standup Single Monitor Console

・Is applicable to Items 0003, 0009, 0017

・ Post First Article Test, all tested material will be sent to NSWCPD:

Note: The Government reserves the right to have a representative present for First Article Testing or to request an independent accredited testing facility, Government or Contractor, verify all submitted first article test results before granting any offeror first article approval.

HQ C-1-0001 ITEMS A004-A012 - DATA REQUIREMENTS (NAVSEA) (SEP 1992)

The data to be furnished hereunder shall be prepared in accordance with the Contract Data Requirements List, DD Form 1423, Exhibit 1, located at the end of this solicitation.

CDRL No. Title Data Item Description

A004 Test/Inspection Report DI-NDTI-80809 A005 High-Impact Shock Test Procedures DI-ENVR-80709 A006 Shock Test Report DI-ENVR-80708 A007 Shock Qualification Data Sheet DI-ENVR-80710 A008 As Built Configuration List DI-CMAN-81516 A009 Equipment Technical Manual DI-TMSS-81675 A010 Production Drawings/Models and Associated Lists DI-SESS-81000E

A011 Mechanical Vibrations of Shipboard Equipment Measurement Test Data DI-ENVR-81647

A012 First Article Qualification Test Plan and Procedures DI-NDTI-81307A

H…