Q and A.docx
DOCX document 15 KB Posted
- Attached to
- VLS Resilient Mounts & Shims
- Solicitation number
- N6426725R0031
About this file
This document is a set of Questions and Answers related to a federal solicitation for VLS Resilient Mounts and Shims.
The key details are:
- The solicitation number is N6426725R0031 for the purchase of Resilient Mounts and Shims to support the Vertical Launch System (VLS).
- The procurement is being conducted by the Naval Surface Warfare Center (NSWC) Corona Division.
- The North American Industry Classification System (NAICS) code is 332999.
- The anticipated contract type is Firm-Fixed-Price.
- This is an all-or-none requirement, and partial proposals will be deemed unresponsive.
- The Government will award on a single purchase order to the responsible Offeror whose offer conforms to the requirements and is most advantageous.
- Offerors must be registered in SAM and meet JCP certification requirements to access controlled drawings.
- Proposals are due by the response date in the posting and should be submitted to bryanna.a.alvarez.civ@us.navy.mil.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Q and A.docx | DOCX document | |
| Q and A.docx | DOCX document | |
| N6426725R0031U0002 - Amendment.pdf | ||
| Q and A.docx | DOCX document | |
| Q and A.docx | DOCX document | |
| N6426725R0031U0001 - Amendment.pdf | ||
| Q and A.docx | DOCX document | |
| N6426725R0031 Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Updated 11/19/2024 Q: Are there drawings that are available to non-JCP certified entities?
A: No, there are no drawings available for non-JCP entities. Contractors must be JCP certified in order to view the drawings.
Q: As per solicitation N6426724R0031. Is there a letter of authorization available for tooling use?
A: Please reach out to the Contractor listed on the drawings for more information on a letter of authorization for available tooling use.
Q: Drawing 5223259 has two part numbers referenced i.e. 5223259-1 and 5223259-2. Do you want 1138 of each configuration? Typically, the required part number is listed on the solicitation along with the drawing number.
A: The table in Section C paragraph 4.1 has been revised to include the Part Number and NSN number. The RFP close date has also been extended.
Q: Good Morning. I just wanted to reach out to you to see what I need to do to be able to access the drawings for the VLS Resilient Mounts and Shims. The system shows that they are controlled.
Part# 522259_H, 5497176_H and 5497689 Rev C.
I am new to SAMS system so I am trying to understand procedures on how to access files to be able to review for quoting.
A: You must have a SAM.gov account and on the posting you will press “request access”. With that we will check that your company has a Joint Certification Program (JCP) Certification https://www.public.dacs.dla.mil/jcp/ext/#ext/dashboard. You must have an active status within JCP then we (The Government) will grant you access to the drawings that you will be able to via the SAM posting.
Q: We believe that an email from you, directed to us, confirming that The Naval Surface Warfare Center owns this program and is authorized to buy parts directly from Hutchinson would suffice. We will supply this to Hutchinson for them to send us a quotation.
A: NSWC does not own the VLS Program. If Hutchinson owns the tooling, they should not need our (the Governments) concurrence.
File details come from the government source that posted it. Updated .