N6426719R0030-0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of Amendment 0001 is to remove FAR 52.212-3 and update Section C Statement of Work.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 20-May-2019

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N6426719R0030

X 9B. DATED (SEE ITEM 11)

14-May-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

20-May-2019

CODE

NAVAL SURFACE WARFARE CENTER CORONA DIV.

1999 FOURTH STREET BLDG 510

NORCO CA 92860

N64267 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6426719R0030

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

STATEMENT OF WORK

1. INTRODUCTION

The Naval Surface Warfare Center, Corona (NSWCCO) Division, Measurement Science and Engineering

Department performs Metrology, Test, and Monitoring Systems Assessment supporting the NAVSEA Metrology and Calibration (METCAL) Program.

2. BACKGROUND

Measurement Science and Engineering Department, Code MS35 provides support and guidance for the Test and

Measurement Diagnostic Equipment (TMDE) and the Calibration Standards Program in support of Navy Calibration

Laboratories. The Depot Level Fizeau Interferometers will be used by Navy personnel in shore-based depot laboratories for calibration of a wide variety of optical flats, gage blocks, and mounted mirrors.

3. SCOPE

NAVSEA METCAL Program requires an Indefinite Delivery, Indefinite Quantity contract to procure up to 17

Depot Level Fizeau Interferometer’s for all Navy calibration laboratories necessary to replace the Navy’s current

Plano-Interferometer; the D305 and D309 series by Davidson Optronics. The Fizeau Interferometer shall cover up to four (4) inches in diameter for optical flats with a 4-inch transmission flat. For vertical configurations, the minimum height length for testing of gage blocks for this configuration shall be six (6) inches to provide proper clearance.

4. APPLICABLE DOCUMENTS

Document

Type

No./Version Title Date

MIL-PRF

28800F Test Equipment for use with Electrical and Electronic

Equipment, General Specification.

http://assist.daps.dla.mil/quicksearch/

24-Jun-1996

MIL-PRF

38793C Manuals, Technical: Calibration Procedures Preparation http://assist.daps.dla.mil/quicksearch/

19-Aug-2008

NIST Technical

Note

1297 Guidelines for Evaluation and Expressing the Uncertainty of NIST Measurement Results http://physics.nist.gov/Pubs/guidelines/TN1297/tn1297s or from the National Institute of Standards and

Technology, Gaithersburg, MD 20899-0001

1994 Edition

CSS 06-3211 Calibration Standard Specification-Depot Level Fizeau

Interferometer, Section J, Attachment 1

August 2018

NAVAIR

17-35QAC-

01B

Navy Marine Corps Calibration Laboratory

Audit/Certification Manual Section J, Attachment 2

01-Dec-2006 http://physics.nist.gov/Pubs/guidelines/TN1297/tn1297s

5. REQUIREMENTS

The Contractor shall provide the Government up to 17 Depot Level Fizeau Interferometers in accordance with specification CSS 06-3211Section J, Attachment 1.

5.1.1 The Contractor shall provide operator/maintenance manual(s) required to be supplied with each calibration standard. At a minimum, these manual(s) shall contain information on operator/maintainer safety, theory of operation, troubleshooting, preventative maintenance, periodic maintenance, calibration, maintainability data, and operational instructions. The manuals can be either print or electronic media format on either CD-ROM or DVD disks. (CDRL T001, Section J, Exhibit A)

5.1.2 The Contractor shall ensure the interferometers shall be provided with a manufacturer’s standard commercial warranty, of one (1) year minimum after acceptance by the Navy.

5.1.3 A calibration certificate with a report referencing actual data shall be provided by the vendor to the

Government for each interferometer procured. (CDRL A001, Section J, Exhibit A)

5.1.4 Calibration certificates provided must include standards that are traceable to the National Institute of Standards and Technology (NIST) and result in an Accredited Certificate/Report of Calibration.

5.1.5 The Contractor shall provide a calibration label indicating the calibration interval shall be placed on each delivered interferometer.

5.1.6 The Contractor shall provide a Software/Firmware version to be provided with each system delivered. The

Software/Firmware version shall be the same on all interferometers delivered. (CDRL A002, Section J, Exhibit A)

5.1.7 The Contractor shall provide a Software/Firmware Change Request, to the US Navy prior to any software/firmware changes to alert and inform the US Navy about changes to software/firmware and also to provide detailed information about the changes and estimated cost. The Software/Firmware Change Request shall be provided on CD-ROM, DVD disk, or via an internet downloadable site to the US Navy for correction of software errors or commercially available improvements for the model numbers of the calibration standards installed for a period of not less than five (5) years. (CDRL A003, Section J, Exhibit A)

6. DELIVERABLES

CDRL DESCRIPTION DID DUE DATE

A001 Calibration Certificate DI-QCIC-80798C

ASREQ

A002 Software Version Description DI-IPSC-81442A

A003 Software Firmware Change Request

DI-MISC-81807

T001 Operator/Service Manual DI-TMSS-80527C ASREQ

(End of Text)

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND OTHER STATEMENTS OF OFFERORS

The following have been deleted:

52.212-3 Offeror Representations and Certifications--Commercial

Items

OCT 2018

(End of Summary of Changes)