Attacchment_4_NSWCCORDIVINST_8020.6_Expl_Safety_Management_24_Feb_2017.pdf
PDF 1 MB Posted
- Attached to
- Explosive Waste Transport and Dsiposal
- Solicitation number
- N6426719Q0129
About this file
ATTACHMENT 4
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NSWCCORDIVINST 8020.6
Enclosure (1)
EXPLOSIVES SAFETY MANAGEMENT PROGRAM AT
NAVAL SURFACE WARFARE CENTER CORONA DIVISION
DETACHMENT FALLBROOK
i
IDENTIFICATION TABLE OF CONTENTS PAGE
CHAPTER 1: EXPLOSIVES SAFETY MANAGEMENT PROGRAM 1-1
1. Introduction ..................................... 1-1
2. Discussion ....................................... 1-1
3. Definitions ...................................... 1-1
4. Policy ........................................... 1-1
5. Action ........................................... 1-2
6. Process for ESI Inspections of Det Fallbrook ..... 1-3
7. Det Fallbrook Process ............................ 1-3
8. ESSA Process ..................................... 1-3
9. ESSA Final Report Format ......................... 1-5
CHAPTER 2: SAFETY REQUIREMENTS IN EXPLOSIVES AREAS 2-1
1. Introduction ..................................... 2-1
2. Discussion ....................................... 2-1
3. Smoking and Flame Producing Devices .............. 2-1
4. Explosive and Personnel Limits ................... 2-2
6. Process Supervisors .............................. 2-2
7. Explosive Placard and Other Firefighting Symbols . 2-2
8. Notification of After Hours Explosives Operations and Testing ...................................... 2-3
9. Red (BRAVO) Flag, Flashing Lights, Barricades, and Signage ...................................... 2-3
10. Hazard Control Briefs for Visitors to Explosives
Operating Buildings, Magazines, and Ranges ....... 2-4
11. Housekeeping ..................................... 2-6
12. Employees Working Alone .......................... 2-6
13. Transmitting Devices ............................. 2-6
14. Personal Fitness Devices ......................... 2-6
15. Reporting Explosive Mishaps, Unsafe Conditions and Near Misses .................................. 2-7
16. Ordnance Handling Equipment ...................... 2-8
17. Clothing ......................................... 2-9
18. Handling Operations Involving
Explosives/Energetic Materials ................... 2-9
19. Tools ........................................... 2-10
20. Inspections of Explosives Facilities ............ 2-10
21. Amnesty Program ................................. 2-10
22. Explosives Safety Deviations, Exemptions and
Waivers ......................................... 2-10
23. Eating .......................................... 2-11
24. Essential Personnel ............................. 2-11 ii
IDENTIFICATION TABLE OF CONTENTS PAGE
CHAPTER 3: OPERATIONS DURING ELECTRICAL STORMS 3-1
1. Introduction ..................................... 3-1
2. Background ....................................... 3-1
3. Definitions ...................................... 3-1
4. Discussion ....................................... 3-1
5. Policy ........................................... 3-1
6. Action ........................................... 3-1
CHAPTER 4: MATERIAL POTENTIALLY PRESENTING AN EXPLOSIVES
HAZARD DECONTAMINATION, INSPECTION,
CERTIFICATION, AND VERIFICATION 4-1
1. Introduction ..................................... 4-1
2. Policy ........................................... 4-1
3. Action ........................................... 4-1
4. Definitions ...................................... 4-4
5. MPPEH Profiling .................................. 4-4
6. MPPEH Site Requirements .......................... 4-5
7. Assessment, Documentation, Labeling, and
Containerization ................................. 4-6
8. Material Documented As Safe ...................... 4-6
9. Material Documented as an Explosive Hazard ....... 4-8
10. Transportation of MPPEH .......................... 4-9
11. Empty Containers and Packaging Materials ........ 4-10
12. Personnel Designated to Assess and Document
Explosives Safety Status ........................ 4-12
13. Qualification and Certification for Personnel
Authorized to Process MPPEH ..................... 4-12
CHAPTER 5: INERT ORDNANCE CERTIFICATION 5-1
1. Introduction ..................................... 5-1
2. Discussion ....................................... 5-1
3. Policy ........................................... 5-1
4. Action ........................................... 5-2
CHAPTER 6: EXPLOSIVES PERSONNEL QUALIFICATION AND
CERTIFICATION PROGRAM 6-1
1. Introduction ..................................... 6-1
2. Action ........................................... 6-1 iii
IDENTIFICATION TABLE OF CONTENTS PAGE
CHAPTER 7: HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE
PROGRAM 7-1
1. Introduction ..................................... 7-1
2. Definitions ...................................... 7-1
3. Discussions ...................................... 7-1
4. Policy ........................................... 7-1
5. Action ........................................... 7-2
CHAPTER 8: SHIELD CERTIFICATION 8-1
1. Introduction ..................................... 8-1
2. Policy ........................................... 8-1
3. Action ........................................... 8-1
CHAPTER 9: MATERIALS, PROCESSES, EQUIPMENT, AND FACILITIES
REVIEW COMMITTEE 9-1
1. Introduction ..................................... 9-1
2. Policy ........................................... 9-1
3. Action ........................................... 9-1
4. MPERC Procedures ................................. 9-2
5. Material Peer Review Requirements ................ 9-3
6. Process Peer Review Requirements ................. 9-4
7. Equipment Peer Review Requirements ............... 9-4
APPENDIX A: ACRONYMS AND DEFINITIONS .........................A-1
APPENDIX B: EXPLOSIVES SAFETY MANAGEMENT PROGRAM
RESPONSIBILITIES BY ORGANIZATION .................B-1
APPENDIX C: FORM ESO 8020/12 - REQUEST FOR AUTHORIZED
SMOKING AREA IN EXPLOSIVES AREAS .................C-1
APPENDIX D: VISITOR HAZARD CONTROL BRIEF (SAMPLE) ............D-1
APPENDIX E: REQUIREMENTS FOR SHUT DOWN OF EXPLOSIVE
OPERATIONS .......................................E-1
APPENDIX F: MPPEH MANAGEMENT FORM (SAMPLE) ...................F-1
APPENDIX G: FORM 13481A – ISSUE RELEASE/RECEIPT DOCUMENT
(SAMPLE) .........................................G-1
APPENDIX H: MDAS ADDITION FORM ...............................H-1
APPENDIX I: APPROVED LABELS IDENTIFYING MDAS & MDEH STORAGE
CONTAINERS .......................................I-1
iv
IDENTIFICATION TABLE OF CONTENTS PAGE
APPENDIX J: DECONTAMINATION OF EQUIPMENT AND/OR FACILITY .....J-1
APPENDIX K: EMPTY CONTAINER FOR REUSE CONTROL LOG (SAMPLE) ...K-1
APPENDIX L: IDENTIFICATION AND CONTROL OF INERT ORDNANCE .....L-1
APPENDIX M: REQUEST FOR INERT ORDNANCE CERTIFICATION
(SAMPLE) .........................................M-1
APPENDIX N: COMPLETED INERT ORDNANCE INVENTORY MEMORANDUM
(SAMPLE) .........................................N-1
APPENDIX O: INERT ORDNANCE INVENTORY MANAGER APPOINTMENT
LETTER (SAMPLE) ..................................O-1
APPENDIX P: HERO PROGRAM PROCEDURES ..........................P-1
APPENDIX Q: HERO WARNING LABEL ...............................Q-1
APPENDIX R: RADIO FREQUENCY HAZARD SIGNS .....................R-1
APPENDIX S: HERO FLOW CHART ..................................S-1
APPENDIX T: CERTIFICATION OF PERSONNEL PROTECTIVE SHIELDS ....T-1
1-1
CHAPTER 1
Explosives Safety Management Program
1. Introduction. This chapter provides the requirements for explosives safety in accordance with references (a) through (t).
Reference (s) identifies explosives safety programs that are the responsibility of the Host and tenants. This chapter applies to Naval Surface Warfare Center, Corona Division, Detachment Fallbrook (Det Fallbrook).
2. Discussion. This chapter provides the process for establishing and maintaining explosives safety policy as required by reference (a) and assessing compliance to the policy in accordance with references (b), (f), (d), and (m). In addition, it identifies the Explosives Safety Self-Assessment (ESSA) Program. A matrix of Explosives Safety Program Responsibilities by Organization is provided in Appendix B.
3. Definitions. Refer to Appendix A.
4. Policy
a. Explosives safety programs that are the responsibilities of the command and Explosives Safety Officer (ESO) are delineated in reference (f). Program requires oversight by Det Fallbrook’s ESO.
b. Det Fallbrook’s Explosives Safety Management Program (ESMP) identified by reference (f) is developed, implemented, managed, and assessed by Det Fallbrook’s ESO. The ESO serves as the Technical Authority for administration and development of explosives safety policy in concert with Department of Defense requirements and amplifying Department of the Navy and Department of the Army policy in accordance with references (a), (b), (d), (f), (k), and (m).
c. References (s) and (t), Inter-service and Intra-service support Agreements (ISSAs), will be utilized when required.
d. The ESSA program shall emphasize the importance of maintaining a well-disciplined, proactive approach to explosives safety by applying the precepts of Operational Risk Management (ORM). Additionally, the ESSA program shall promote the highest standards of Ammunition and Explosives (A&E) safety, integrity, and compliance and is a catalyst for creating and maintaining an action in accomplishing safety-related goals at Det Fallbrook.
1-2
e. The ESO will annually conduct an ESSA to evaluate the status of the ten Explosives Safety Programs in accordance with reference (1f).
f. Reference (m) requires the ESO to inform the Commanding Officer (CO) of the results of the annual ESSA, associated findings, and to keep the CO informed throughout the year on the progress made correcting the ESSA findings.
5. Action
a. Commanding Officer will:
(1) Review results and risk assessments identified during the ESSA, provided by the ESO.
(2) Acknowledge concurrence of ESSA results and risk assessments by signing and dating the CO Acknowledgement Block.
b. Det Fallbrook Explosives Safety Officer will:
(1) Schedule and conduct Explosives Safety meetings;
(2) Accomplish the following for Explosives Safety Inspections (ESIs):
(a) Serve as the Det Fallbrook, point of contact for liaison with the ESI Team Leader.
(b) Prepare and provide the ESI Information Book to the ESI Team Leader in accordance with reference (m).
(c) Prepare and electronically submit via Naval Ordnance Safety and Security Activity (NOSSA) Explosives Safety Correction System (ESCS), the ESI Corrective Action Plan (CAP) within 45 calendar days from the date of the signed final ESI report and 90-day periodic progress reviews in accordance with reference (m).
(3) Maintain the individual ESSA deficiency/improvement actions. ESSA deficiencies will be entered into and tracked in Enterprise Safety Applications Management System (ESAMS). The ESO will enter all ESSA deficiencies into ESAMS. Systemic ESSA deficiencies will be tracked via the ESO.
(4) The ESSA report will include the ESAMS Deficiency
1-3
Report for the current ESSA which identifies the Hazard, Severity, Probability, and Risk Acceptance Code (RAC) required by reference (m).
(5) Provide training to ESSA Team Leaders on the conduct of the ESSA, Final Report requirements, and document completion of training.
(6) Provide applicable previous years ESSA report to the appropriate ESSA Team leader.
(7) Maintain ESSA Program checklists. ESSA Program Checklists will be the current Navy ESI Program Evaluation Guides from the NOSSA website that has been customized by the ESO to include local instruction/directive specific questions.
(8) Maintain Ammunition and Hazardous Materials (AMHAZ) Handling Review Board, ESI CAPs, and ESSA associated records for at least four years (two ESI cycles), in accordance with reference (m).
6. Process for ESI Inspections of Det Fallbrook
a. The ESO is responsible for the oversight of the process for ESI inspections at Det Fallbrook.
b. The ESO will track through completion, all ESI findings using Det Fallbrook’s CAP process.
7. Det Fallbrook Process
a. Each ESI finding will be addressed as two separate entities:
(1) The finding itself.
(2) A root cause analysis of the finding.
b. The ESO will track, through completion, all ESI findings and all root cause analyses by use of the CAP.
c. The CAP and 90-day CAP periodic progress review will be submitted to NOSSA, in accordance with reference (m).
8. ESSA Process
a. Annual ESSA schedules will be established by the ESO.
1-4
b. Team members will be assigned by Det Fallbrook Managers to conduct ESSAs.
c. The ESO will track the progress of the individual ESSA teams.
d. The ESO will establish the tasks to be performed by each of the ESSA team members.
e. The ESO will conduct final report review meetings for each individual ESSA.
f. The ESO will identify and track through completion, via ESAMS, the individual deficiency/improvement actions for resolving explosives safety issues that were identified during the individual ESSAs as systemic, to include:
(1) Follow-Up;
(2) Root Cause Analysis;
(3) Trend Analysis.
g. ESSA Team Leader shall:
(1) Perform the ESSA to identify process problems and to recommend solutions and/or process improvements associated with explosives safety management.
(2) Use the ESO provided checklist. The Checklist will be a customized version of the current NOSSA Navy Shore Station ESI Program Evaluation Guides that includes local instruction/directive specific questions, if applicable.
(3) Ensure their Team, as required, obtains all instructions, documents, Standard Operating Procedures (SOPs), Supplemental Documents (SDs), and records relevant to each program under assessment.
(4) Perform an initial desktop assessment of whether an effective process is in place via instructions, documents, SOPs, and SDs. Determine whether these documents provide adequate authority and direction to meet the requirements of each program and that an adequate ORM assessment/hazard analysis has been performed, as appropriate.
1-5
(5) Prepare and submit a final report to the ESO.
(6) Present the final report to the ESO.
h. ESSA Team Members shall:
(1) Participate fully with the conduct of the ESSA.
(2) Provide assistance as required to aid in the implementation of internal controls and monitor processes to preclude recurrences of deficiencies.
(3) Monitor progress of enhancements identified during the ESSA process and ensure that corrective actions are adequate and accomplished expeditiously.
(4) Utilize appropriate sections of the ESO provided Navy ESI Program Evaluation Guide as the tool in performing the assessment.
(5) Evaluate the effectiveness of the assigned program, document findings, and provide comments/feedback for improvement as required.
9. ESSA Final Report Format
a. The ESSA Final Report format shall include the following:
(1) Cover Sheet – Provide the following in the order listed:
(a) (Year) Explosives Safety Self-Assessment
(b) Team Leader: (Team Leader’s Name and Code)
(c) Team Members: (Team Members’ Names and Codes)
(d) Conducted: (Months & Year when ESSA was performed)
NOTE: Team Leader and Team Member signatures are not required.
(2) Executive Summary:
ESSA Methodology – State that the ESSA methodology is provided in Appendix A.
1-6
ESI Findings:
(a) State the number of findings within the Program from the last ESI.
(b) State the number of active findings within the Program from any earlier ESIs.
(c) State that a full description of the above ESI Findings is provided in Appendix B of the final report.
(d) If any of the findings listed above are still active, for each one provide:
(1) The ESI Finding number.
(2) The ESI description of the finding.
(3) The current status of the finding.
ESSA Findings – State the number of individual findings identified during the ESSA and that a full description of the ESSA Findings is provided in Appendix C of the final report.
ESSA Concerns – Include all of the ESSA Concerns, providing each Concern and its associated recommendation(s) as a separately numbered paragraph.
(3) Appendix A – ESSA Methodology – Include the “who, what, when, where, why, and how” of the ESSA.
(4) Appendix B – Review of ESI Findings – Include all of the findings from the last ESI and any active findings from earlier ESIs within the Program being assessed. Include the status of each of these ESI findings.
(5) Appendix C – ESSA Findings – Include all of the findings identified during the ESSA.
(6) Appendix D – ESSA Concerns – Each Concern is to be identified using the following.
Review all of the ESSA Findings and group them into ESSA Concerns.
1-7
NOTE: If a finding is not related to any of the other findings, you may include it as a single Concern.
(a) Concern – Identify the Concern in a concise manner.
(b) Discussion
(c) Root Cause Analysis. Provide an explanation of the Team’s determination of the reason(s) why the Concern exists.
(d) Recommendation(s). List and discuss the Team’s recommendation(s) to correct the existence of the Concern.
NOTE: Include only the concerns and their associated recommendation(s) in the Executive Summary (not the Discussion or the Root Cause Analysis). Divide each of the concerns into separately numbered paragraphs in the Executive Summary. During the ESSG meeting, you will brief the Executive Summary only.
The remainder of the report can be referred to when necessary.
(7) Appendices beyond. Include any other supporting material (documents, photographs, etc.) pertinent to the ESSA, beginning with Appendix E of the final report.
NOTE: Do NOT include in the final report any specific reference to the location of security-related findings! For example, instead of stating, “Magazines 123, 456, and 789 have inoperable locks,” state it this way: “Three magazines have inoperable locks.”
2-1
CHAPTER 2
Safety Requirements In Explosives Areas
1. Introduction. This chapter provides general safety requirements not included in specific program areas that apply to explosive operations conducted by Det Fallbrook, and adjacent sites. This chapter applies to Det Fallbrook contractors and visitors.
2. Discussion. This chapter provides the general safety requirements that apply to the explosives operations conducted by RS40F. Reference (d) provides detailed information relative to ordnance operations and safety thereof. Safety of operations must be the prime concern of all personnel during work involving explosive materials. Every effort will be made to eliminate unsafe practices and minimize risks. Improper handling of ammunition, ammunition components, and/or explosive materials may result not only in component malfunction, but also in catastrophic accidents, which may cause considerable damage and result in injury to personnel and/or loss of life. All safety requirements are met with the intent of continuous process improvement.
3. Smoking and Flame Producing Devices. Smoking is permitted only in designated areas and is strictly prohibited within any areas where explosives and ammunition are present. The carrying of matches, lighters, or other spark/flame-producing devices is prohibited in any explosives area unless it is required for an operation such as hot work, welding, etc. Smoking in explosives areas must be authorized as required by reference (d). The approval of these smoking areas is delegated to the ESO.
Smoking areas will meet the requirements of reference (d) including:
a. Posted with a “Designated Smoking Area” sign.
b. A posted copy of the approved Request for Authorized Smoking Area Form (ESO 8020/12) (found in Appendix C).
c. Installed electric; if electrical power is present, only handheld flameless lighters, of a type that can be lit only by a positive action, are permitted. (NOTE: No flame-producing devices are allowed in explosives containing facilities.)
d. A 2½-gallon [2A10BC] stored pressure water extinguisher or equivalent.
2-2
e. A metal receptacle for cigarette butts, preferably containing water or sand. Receptacles will be emptied at the end of the workday.
f. Prohibit personnel wearing clothing contaminated with metal powder, explosives, or dust that is explosive or highly flammable, from entering a smoking area until contaminated clothing has been removed.
g. Smoking is not allowed at any time in any Government Owned Vehicle.
4. Explosive and Personnel Limits. Placard stating the maximum number of personnel (Operators/Transients) allowed in a building, cell, room or other similar space that contains ammunition, explosives, or other hazardous materials, will be conspicuously posted. Personnel limits do not need to be posted in magazines or magazine areas. Explosives and personnel limits should never be exceeded for any reason.
5. Safety Permits. For maintenance, repair, and construction work in and around explosives areas, a Safety Permit from the Host ESO is required prior to the commencement of work. The permit will be signed by the facility custodian, the person performing the work, and the ESO. The approved permit must be available at the work site. Process Supervisors are responsible for notifying the Host ESO and Fire Department to schedule the Safety Permit.
6. Process Supervisors. Process Supervisors of explosives operating buildings will be assigned in writing. The designation letter will assign clear authority and responsibility. The Process Supervisor is responsible for ensuring explosives operations are conducted in accordance with reference (d), SOPs, and other applicable directives. If no Process Supervisor is available, all explosives operations will cease until a designated Process Supervisor is available. A Process Supervisor must hold a Team Leader explosives certification level in all Work Task Codes and Ordnance Family Groups that are ongoing within their designated areas of responsibility. (NOTE: Process Supervisor is synonymous with Building Supervisor.)
7. Explosive Placard and Other Firefighting Symbols
2-3
a. Vehicle Placards. All government vehicles transporting Hazard Class 1 (explosives) material will placard their vehicle.
This includes placarding vehicles transporting all quantities of Hazard Class 1, Division 4 material. These placards will be displayed on the front, rear, and both sides of the vehicle.
Specification for and the placement of these placards will be in accordance with reference (d).
b. Fire Symbols for Magazines and Explosive Operating Buildings. Appropriate fire symbols will be used to indicate the presence of ammunition or explosives material in any magazine or operating building. Additional placards may be required to indicate special firefighting techniques (no water symbols, respirators required, etc.). Reference (d) provides information related to symbols and posting requirements.
c. EMPTY or INERT signs will be posted outside magazines and operating buildings which do not contain explosives or energetic materials. EMPTY/INERT placards will not be the same shape as the designated fire symbols identified in reference (d).
8. Notification of After Hours Explosives Operations and Testing. When explosives operations or functional testing is planned outside of normal working hours, whether on a weekday or weekend, the following organizations will be notified: ESO, and Host Fire Department. The following information will be provided:
a. Building number or Range;
b. Specific hours the operation will be underway;
c. Type of explosive operation;
d. Total number of personnel onsite;
e. Point of contact (Process Supervisor or Range Safety Officer (RSO)) with contact phone number.
9. Red (BRAVO) Flag, Flashing Lights, Barricades, and Signage
a. A red flag shall be displayed prominently near the entrance of any explosive operating building, magazine and or magazine area whenever work connected with explosives or ammunition is in progress. The red flag is to indicate from a distance that personnel and explosives are in the building or magazine. Flags are to be removed when operations are completed for the day and all personnel have vacated the building or magazine.
2-4
b. A red flag will be displayed prominently near the entrance of any range or flown at the entry point of the range to indicate that the range area is “hot” (i.e., explosives testing is in progress or detonations are planned to occur).
When operations cease, the flag will be hauled down or removed.
c. Red flashing lights that are visible from all normal approaches in addition to the red flags, warn personnel of the presence of a significant hazard such as a remotely controlled operation or a test firing/detonation in progress.
d. Barricades and gates are frequently used to secure a road or area during testing, burning, or demolition operations.
These barricades or gates will not be passed in any fashion without specific clearance from the Range Control Officer (RCO) or RSO conducting the operation. Contact the appropriate RCO/RSO prior to entering and leaving these areas. Even if you see someone pass a barricade, do not follow. They may be part of the team conducting the operation and have permission to re-enter the area. Certain areas may be closed for extended periods of time, including weekends and nights. Some test operations may be conducted continually.
e. Signage is posted on the installation to warn installation personnel and visitors of specific hazardous areas and areas requiring restricted access. Examples are:
(1) Ordnance Ranges have perimeter and entry point signage posted to warn personnel they are entering into a danger area and to check in with the RCO/RSO. Signage states Warning Explosives Test Area Do Not Enter;
(2) Entrance into the ordnance area is posted on roadways encumbered by explosives quantity distance arcs.
Signage states “Warning Explosives Area Authorized Personnel Only;”
(3) Hazard of Electromagnetic Radiation to Ordnance (HERO) signs are posted in locations where transmitters must be turned off or left in vehicles.
10. Hazard Control Briefs for Visitors to Explosives Operating Buildings, Magazines, and Ranges. Visitors to explosives operating buildings, magazines, ranges or any other facility that have explosives present, shall receive a Hazard Control Briefing (HCB), relevant for that facility or operation.
2-5
a. Visitors are required to sign the HCB to acknowledge they are aware of the hazards present.
(1) Authorized Visitor – Personnel conducting project or mission related functions that require them to be present in the explosives area for a limited time. Examples are Naval Facilities Engineering Command or contractor personnel performing maintenance or repairs, official tours by sponsors or other installation related personnel.
b. The visitor HCB shall, at a minimum, be given monthly for returning visitors; however, the frequency is dependent on the changing status of the building, area, or facility.
c. Process Supervisors, RCO or an RSO will provide the HCB to visitors if explosives operations are ongoing in the facility. If no explosives operations are ongoing, any Team Leader may provide the visitor the HCB.
d. The brief should include at a minimum, the following items (see Appendix D as an example of a visitor HCB):
(1) General awareness information pertaining to the area, building, or facility.
(2) Smoking policy for the area and that no flame or spark producing devices, such as lighters and matches, are allowed in the area.
(3) Transmitter policy.
(4) Evacuation/emergency action plan and rally points in case of fire or other emergency.
(5) PPE requirements.
(6) Location of explosives and if testing is ongoing or not.
e. Visiting personnel that are participating in hands on work with explosives shall receive and sign the HCB for the specific SOP being used for the operation they are participating in, and are not required to have the visitor HCB.
f. Visiting personnel will provide their credentials, or explosive qualification and certifications, to the ESO.
2-6
11. Housekeeping
a. All magazines and explosives operating buildings will be kept clean. Any combustible materials such as paper, oily rags, cotton waste, paints, wood, etc., needed to complete operations conducted within the area will be removed daily. All work areas will be cleaned and tools properly stowed prior to the end of each workday. Scrap materials (banding material scrap, pallets, etc.) will not be permitted to accumulate in or near magazines or explosive operating buildings.
b. During operating hours, doors will be fastened only with anti-panic latches or approved quick-acting devices. They will be kept in good working order.
c. Access to safety equipment such as fire alarms, fire hydrants, fire extinguishers, safety showers, eye wash stations, first aid kits, emergency stops, electrical panels, and fire bills will not be blocked. The location of safety equipment will be appropriately and conspicuously marked to indicate the equipment’s accessibility.
12. Employees Working Alone. During any operation involving explosives or energetic material, no employee will be permitted to work alone in a location where assistance from another cannot be given immediately in the event of an accident. Reference (d) allows for a Safe Person Plan for Research, Development, Test and Evaluation (RDT&E) explosives/energetic processes for situations which may warrant it. The plan must be documented in the applicable SOP.
13. Transmitting Devices. Transmitters operating in an explosives area must have HERO approval. All transmitters will display an appropriate sticker indicating the required safe separation distance for HERO UNSAFE ORDNANCE, HERO UNRELIABLE ORDNANCE, and HERO SUSCEPTIBLE ORDNANCE. Additional information on the HERO program and requirements are in Chapter 7.
14. Personal Fitness Devices. In addition to personal transceiver devices such as cell phones, laptops, and tablets, there are emerging technologies such as Personal Electronic Devices (PEDs) (e.g., Apple Watch and Google Glass), Personal Wearable Fitness Devices (PWFDs) (e.g., Fitbits, Nike Fuel Band, and Jawbone Up), and Personal Wireless Medical Devices (PWMDs) (e.g., hearing aids, body monitors, and artificial limb controls) which can automatically transmit Radio Frequency (RF) energy without operator action. These devices, while typically
2-7 authorized for use in Navy and DoD spaces, shall be turned off prior to entering magazine and assembly areas, and/or encroaching the established HERO separation distance for ordnance. All operators/users of these devices must know and understand the HERO UNSAFE, HERO UNRELIABLE, or HERO SUSCEPTIBLE ORDNANCE safe separation distance requirements for the transmitters under their control. These distances must be maintained between ordnance operation areas and the transmitter system; otherwise, the transmitter system must be turned off.
The use of RF devices inside magazines and assembly areas is prohibited, unless the CO, NOSSA Weapons and ESO (Code N8) approval is granted, and certification of these devices does not constitute approval for use in a magazine unless specifically stated in the certification.
15. Reporting Explosive Mishaps, Unsafe Conditions and Near Misses
a. All employees are responsible for reporting any accident, unsafe conditions or unsafe acts observed to their supervisor and the ESO. When an unsafe condition exists, operations affected by the unsafe condition will cease until the condition can be corrected. Any person can request a delay or cessation of an explosive operation if they feel it is unsafe.
Once reported, a supervisor and/or ESO will conduct a safety review prior to the resumption of operations. Employees can request a safety review without fear of reprisal. All Near Misses shall be reported to the appropriate Safety Officer.
b. All explosives mishaps and near misses will be reported to the ESO. The ESO will investigate, report, and maintain records of all mishaps and near misses as required by reference (g). Near Misses will be reported using ESAMS by the appropriate supervisor of the explosives operation once investigated by the ESO.
(1) Explosive Mishap. Includes all of the following occurrences, near-occurrences and/or circumstances:
(a) Dangerous Defect. A defect, found upon visual examination or local test, in an explosive material/system which is capable of resulting in an explosive mishap (i.e., critical defects).
(b) Explosive Accident. An unplanned explosion or fire involving an explosive material/system.
2-8
(c) Explosive Incident. An occurrence which creates a potentially hazardous situation. Incidents include, but are not necessarily limited to:
1. Human errors in processing, assembly, testing, loading, storing, transporting, handling, using or disposing of an explosive material/system.
2. Unusual or unexpected occurrences, unnatural phenomena unfavorable environments or instances of equipment failure which may damage or affect safety or reliability of an explosive material/system.
3. Loss or abandonment of an explosive material/system resulting in a potential hazard to untrained personnel who may find the item.
4. Misused or unauthorized alteration of an explosive material/system.
5. Any failure or malfunction of, or damage to, a launch device or associated hardware which occurs when an explosive material/system is being handled or otherwise manipulated.
(2) Explosive Near-Mishap. Any event which, except for chance, would have been an explosive mishap.
(3) Malfunction. The term applied to an explosive material/system when it fails to function in the manner for which designed. Malfunctions are considered major or minor as follows:
(a) Major Malfunction. Failure to function in the manner for which designed, resulting in, or potentially capable of resulting in, personal injury and/or material damage.
(b) Minor Malfunction. Failure to function in the manner for which designed and does not result in injury or material damage and for which the potential for injury or material damage is remote (duds, downrange prematures, etc.).
16. Ordnance Handling Equipment. Only approved, authorized handling equipment may be used for the lifting or handling of ammunition, ammunition components, or explosives. Reference (d) applies to any procedures involving ordnance handling.
2-9
17. Clothing
a. Non-Static Producing. All personnel engaged in or in the immediate vicinity of explosive handling operations will wear non-static producing clothing (cotton clothing). This includes undergarments, socks, etc. Should the operation require additional personnel protective equipment (PPE), only cotton clothing may be worn under the PPE in accordance with the applicable SOP.
b. Personnel Protective Equipment. Supervisors are responsible for ensuring all necessary PPE is available for and properly used by employees under their supervision. SOPs will identify appropriate PPE to be used for specific operations.
18. Handling Operations Involving Explosives/Energetic Materials. The cardinal rule for explosive operations is “minimize.” That is, use only the minimum number of personnel necessary to perform the operation, expose them only for the minimum amount of time necessary to perform the operation, and expose them to only the minimum amount of explosive material needed to perform the operation.
a. Serviceable A&E
(1) A&E, whether in containers, in bulk, or loaded into projectiles, cartridges, or ammunition components, must be handled carefully to prevent heat, shock, or friction, which may cause a fire or explosion, or which may damage the material or item. These materials must not be thrown, dropped, walked upon, dragged, or tumbled over the floor or over other containers, or otherwise be subjected to shock or friction.
(2) Handling of A&E will be reduced to a minimum in order to prevent damage and the creation of hazardous conditions. Every precaution will be taken to avoid their contact with sand, earth, gravel, or other abrasive substances.
A&E must not be exposed unnecessarily to inclement weather or to direct rays of the sun. No explosives will be carried in or out of the area when there is snow or ice on the areas where personnel must walk.
(3) Ammunition that is carried by hand will be cradled in the handlers arms and carefully handled to prevent dropping or blows from external sources. Ammunition that can be readily carried in one hand will be handled with care to prevent dropping or strikes against objects.
2-10
(4) If any container is found to be in unsatisfactory condition, its contents must be transferred to an appropriate container and properly relabeled. Any evidence that explosives or ammunition have been roughly handled will be reported immediately.
b. Unserviceable A&E. Special care will be taken when handling or transporting unserviceable items. Items of unknown safety will be inspected by Explosive Ordnance Disposal (EOD) personnel in order to determine the final disposition.
19. Tools. Only non-sparking tools may be used in the presence of exposed explosive material. Use of electrically-powered tools is prohibited unless specifically permitted via an approved SOP. Only tools specifically authorized by an SOP may be used. To avoid misuse, tools not specifically referred to in the SOP shall not be in the immediate vicinity of the operation.
20. Inspections of Explosives Facilities. ESO will conduct regular inspections of all ordnance ranges, explosive operating buildings, and magazines, ensuring that they meet the requirements of reference (d). Deficiencies will be reported to the supervisor of the area inspected and entered into ESAMS.
21. Amnesty Program. The Amnesty Program is not intended to circumvent standard ammunition accountability procedures. The Amnesty Program will be under the oversight of the ESO.
22. Explosives Safety Deviations, Exemptions and Waivers. When explosives safety requirements cannot be met, an explosives safety deviation, exemption or waiver must be approved prior to commencement of the explosives operation. All explosives safety deviations, exemptions, and waivers will in accordance with requirements in reference (d), and coordinated through the Host
ESO.
a. Exemption. A deviation from mandatory explosives safety requirements approved for the purpose of long-term satisfaction of recurring readiness or operational requirements. Exemptions are generally issued for a maximum of 5 years, but will not be granted for a period in excess of that estimated for correction of the deficiency.
b. Waiver. Written authority which provides a temporary exception and permits deviation from a mandatory requirement of this manual. It is generally granted for short periods of time
2-11 not to exceed 2 years, pending cancellation as a result of termination of scheduled work commitments or correction of the waived conditions.
c. Explosives Safety Event Waivers. An event waiver is a deviation issued for a limited time, on a non-reoccurring basis, for a particular explosives operation encumbered by Explosives Safety Quantity Distance (ESQD) arcs that cannot otherwise be satisfied. Event waivers are submitted for compelling mission requirements not operational convenience. Requests for Event Waivers will be submitted via message by the Installation Command Officer. Process for requesting an Event Waiver is provided in reference (d). Other non-explosives operations such as maintenance projects encumbered by explosive arcs will be approved under a Construction Worker Authorization (CWA) and vetted through the Host ESO.
(1) Construction Worker Authorization. When construction personnel must, on a temporary basis, be within K18 intra-line distance (ILD) from a Potential Explosion Site (PES), they shall be provided the maximum practical protection from the effects of an explosion at the PES. Approval authority for construction workers within K18 ILD of a PES is dependent on the work involved, amount of time the workers will be present and type of facilities affected. CWA submission guidance is provided below.
(2) Routine maintenance and repair work conducted inside K18 ILD can be approved by the installation ESO. Local safety permits will be issued allowing routine maintenance and repair work. Examples of routine maintenance are provided in reference (d).
(3) Maintenance and repair work that is not routine and affects an explosives facility will be submitted to NOSSA (N5) as a CWA through WebSAR and the Host ESO.
23. Eating. Personnel will not eat, drink, bring food into or store food in any area where explosives materials, ordnance or hazardous materials are handled or stored.
24. Essential Personnel. Personnel whose duties require them to remain within the ESQD arcs during testing or operations for one or more of the following reasons:
a. Direct involvement in ammunition and explosive handling or testing operations;
2-12
b. Direct support of the operations (i.e., data collection, video operators, etc);
c. Safety and Environmental Protection Specialists personnel;
d. Equipment operators that may be needed to position, remove or transport test items/equipment;
e. Visitors who are associated with the mission of the program and are performing oversight on the operation or test.
NOTE: Essential personnel do not include vendors, commercial deliveries (unless carrying mission related material), dependents, or non-DoD personnel except as categorized above.
3-1
CHAPTER 3
Operations During Electrical Storms
1. Introduction. To set forth policy and responsibilities for conducting explosives operations during an electrical storm.
This chapter applies to Det Fallbrook, all operating sites, all contractors, and visitors.
2. Background. Det Fallbrook operates in locations where thunderstorms may occur. Advanced warning, coupled with prior planning for shutting down sensitive operations will result in enhanced safety while reducing the amount of operational downtime.
3. Definitions. Refer to Appendix A.
4. Discussion. The threat of an explosive incident because of a lightning strike is greatest for those operating areas not covered by a lightning protection system. The next greatest threat is for those operating areas equipped with a non-standard lightning protection system. For those fully equipped with a standard lightning protection system, a threat exists if Electrically Initiated Devices (EIDs) are unprotected, flammable vapors are produced, or explosive dusts/powders are in process.
Because of the multiple threats, actions to secure operations must be defined based on the operation and the operating area.
5. Policy. All personnel conducting ordnance operations will be made cognizant of the current weather and lightning conditions.
6. Action. For all operations:
a. The RSO or Process Supervisor will ensure that the storm warning system is in operation whenever A&E operations are being conducted.
b. When the storm warning system detects a storm 30 miles distance from the range or operating building, the Host Weather Operations Representative will notify the RCO, all RSOs, and all Process Supervisors.
c. For shutdown of explosive operations, refer to Appendix E.
4-1
CHAPTER 4
Material Potentially Presenting an Explosives Hazard
Decontamination, Inspection, Certification, and Verification
1. Introduction. This chapter provides policy, assigns responsibilities, and establishes procedures for the overall management (storage, decontamination, inspection, certification, and disposition) of Material Potentially Presenting an Explosive Hazard (MPPEH) for Det Fallbrook, in accordance with references (c), (d), and (n). This chapter applies to Det Fallbrook, all tenant activities, and contractors to the extent referenced in contract documents.
2. Policy
a. The guidelines set forth in this chapter will be followed to assure compliance with regulations in references (c), (d), and (n).
b. The demilitarization and disposition of MPPEH will be accomplished as required by references (c), (d), and (n).
c. Per reference (d), 13-15.3.7, expended small arms ammunition cartridge cases may be processed as a non-explosive operation prior to being assessed and determined safe, provided that they are screened before processing. Screening is intended to ensure that only .50-caliber and smaller are processed, and to remove unused cartridges. Screening will be done by locally determined methods included in approved written operating procedures. Personnel collecting brass from small arms ranges are not required to receive training on the Munitions Rule Implementation Policy.
3. Action
a. Test Execution Branch Head will:
(1) Ensure the requirements of this chapter and references (c), (d), and (n) are met.
(2) Advise all personnel involved in any aspect of MPPEH management of the Det Fallbrook policy requirements as they are promulgated.
4-2
(3) Ensure that all personnel involved in any aspect of MPPEH management attend/complete appropriate MPPEH training courses as identified in reference (d).
(4) Prepare appointment letters listing individuals who are qualified to inspect, certify/verify MPPEH as safe or as an explosive hazard. The appointment letter shall include the appointed individual’s sample signature and family groups that they are approved to evaluate and document. Appointment letters will be signed by the CO or by direction of the CO, reviewed annually, and updated as necessary. A copy of the appointment letter shall be retained by the generator and provided to the ESO, if appropriate.
b. Supervisors of buildings/areas/equipment where explosives have been present will:
(1) Ensure decontamination is performed in accordance with this chapter. Equipment and facility decontamination requirements and guidance are provided in reference (d) and Appendix J of this instruction.
(2) Ensure written decontamination procedures are developed when required.
(3) Ensure all assets (ordnance, equipment, containers, etc.) are inspected, certified, and verified prior to storage, transfer, or disposal.
c. Personnel certifying assets will:
(1) Inspect, certify, and verify materials as required by this chapter.
(2) Complete the “MPPEH Requirements” online training course annually at Navy Knowledge Online (https://www.nko.navy.mil/) or classroom training course (as available) and as directed by reference (d).
d. Explosives Safety Officer will:
(1) Administer the MPPEH management program at Det Fallbrook, including updating policy as new requirements are promulgated and enforcing policy guidelines to attain compliance with all pertinent regulations and DoD requirements.
4-3
(2) Provide technical assistance for decontamination procedures.
(3) Verify, review, and maintain Form 5090-EHW-FM-004 MPPEH Management Form (MPMF) (Appendix F), as appropriate for equipment/material being transferred off site or being placed in storage.
(4) Submit site plans for locations used to process
MPPEH.
e. Environmental Protection (EP) Department will (as applicable to the specific site):
(1) Assist the ESO in administering the MPPEH management program.
(2) Assist in the development of procedures for decontamination (as requested).
(3) Maintain the MPMF in the environmental document controlled forms, review annually and revise as needed.
(4) Assist personnel with completing Disposal Turn-in- Document (DTID), DD Form 1348-1A, for turn-in of safe items to Defense Logistics Agency (DLA) (as requested).
(5) Provide standardized labels for MPPEH, Material Documented As Safe (MDAS), and Material Documented Explosive Hazard (MDEH).
(6) Provide consistent signage for areas that process MPPEH, and areas storing empty containers.
f. Defense Logistics Agency will (as applicable to the specific site):
(1) Verify the DTIDs contain required data and that all certificates contain authorized signatures and data identifying the certifying individuals.
(2) Keep range residue segregated from other property.
(3) Ensure a Memorandum of Agreement (MOA) or Inter- Service Support Agreement is established with the installation Commander in accordance with reference (d).
4-4
(4) Ensure all MPPEH that has been inspected, certified, and verified as safe (MDAS), is either demilitarized or will be demilitarized as a condition of sale.
g. Naval Facilities Engineering Command will ensure maintenance workers and contract personnel are aware of the requirements outlined in this chapter.
h. The Property Management Team will ensure applicable personnel, e.g., equipment custodians, are familiar with and abide by the requirements of this chapter.
i. Det Fallbrook will:
(1) Maintain a record of the following:
(a) All ordnance expended on the range, by position (impact area) and ordnance identification data;
(b) All duds and their disposition;
(c) All items destroyed by detonation on the range and the location of the detonation;
(d) A record of all duds not located and destroyed, including Geographic Information System (GIS) data if available or a general location, e.g., range fan or impact area, if GIS data is not available.
(2) Report all suspected unexploded ordnance (UXO) contaminated areas to Host.
4. Definitions. Refer to Appendix A.
5. MPPEH Profiling
a. Any operation generating, or potentially generating, MPPEH must be evaluated to determine the items explosive safety status. The Hazardous Waste Profile Sheet (HWPS), found in Det Fallbrook operational SOPs, will be used to document the determination.
b. The generating code or activity must complete and sign Section 1 of the HWPS. EP staff will assist in the preparation of Section 1, upon request
4-5
c. EP will evaluate the MPPEH items in cooperation with the generator to determine the explosive safety status. A Waste Stream Number will be assigned and recorded at the top of the HWPS, and again in Section 3. EP will provide an approved HWPS back to the generator.
6. MPPEH Site Requirements
a. MPPEH processing includes any action or operation involving MPPEH, including but not limited to: collecting, consolidating, sorting, segregating, separating by metal type, inspecting, storing, decontaminating, transferring, certifying, releasing, demilitarizing (shredding, shearing, chopping, crushing, flattening, cutting, melting), and transporting materials.
b. Processing of MPPEH is considered an operation involving ammunition and explosives handling, until the material is assessed and documented as safe. Storage of MPPEH is considered ammunition and explosives storage, and must comply with established criteria for such storage.
c. Locations used to process MPPEH must have site approval, based on the maximum potential explosives safety hazards that the…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it.