N64267-17-R-0005_Amendment_2.pdf
PDF 40 KB Posted
- Attached to
- Resistance Calibration Standards
- Solicitation number
- N64267-17-R-0005
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Resistance_Calibration_Standards_Solicitation_Q&A_V.2.docx | DOCX document | |
| Past_Performance_Evaluation_Data_Questionnaire.pdf | ||
| Resistance_Calibration_Standards_Solicitation_Q&A.docx | DOCX document | |
| N64267-17-R-0005_Amendment_0001.pdf | ||
| Exhibit_A.pdf | ||
| RES_CAL_RFP_PACKAGE.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT
Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
15A. NAME AND TITLE OF SIGNER (Type or print)
30-105-04EXCEPTION TO SF 30
APPROVED BY OIRM 11-84
STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA
FAR (48 CFR) 53.243
The purpose of this amendment is to extend the solicitation close date to Friday 1/20/2017 at 1500 Pacific Time. This change comes at no additional cost to the Government and all other terms and conditions remain the same.
1. CONTRACT ID CODE PAGE OF PAGES
J 1 5
16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)
16C. DATE SIGNED
BY 13-Jan-2017
16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR
(Signature of Contracting Officer)(Signature of person authorized to sign)
8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N64267-17-R-0005
X 9B. DATED (SEE ITEM 11)
03-Jan-2017
10B. DATED (SEE ITEM 13)
9A. AMENDMENT OF SOLICITATION NO.
11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS
X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.
Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:
(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;
or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN
REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.
12. ACCOUNTING AND APPROPRIATION DATA (If required)
13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.
IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.
A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE
CONTRACT ORDER NO. IN ITEM 10A.
B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).
C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:
D. OTHER (Specify type of modification and authority)
E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.
14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)
10A. MOD. OF CONTRACT/ORDER NO.
2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)
6. ISSUED BY
3. EFFECTIVE DATE
13-Jan-2017
CODE
NAVAL SURFACE WARFARE CENTER CORONA DIV.
1999 FOURTH STREET BLDG 523
NORCO CA 92860
N64267 7. ADMINISTERED BY (If other than item 6)
4. REQUISITION/PURCHASE REQ. NO.
CODE
See Item 6
FACILITY CODECODE
EMAIL:TEL:
N64267-17-R-0005
SECTION SF 30 BLOCK 14 CONTINUATION PAGE
SUMMARY OF CHANGES
SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO BIDDERS
The following have been modified:
INSTRUCTIONS TO OFFERORS
PART A GENERAL INSTRUCTIONS
1.0 GENERAL
Offerors are required to submit sufficient information concerning the following areas to enable Government personnel to fully ascertain capabilities of the offeror to perform the requirements. The proposal must be sufficient in detail and scope to permit evaluation and provide the evaluators a clear understanding of the offeror’s approach, expertise, experience and capability as required by the solicitation. All proposals must clearly and convincingly demonstrate that the offeror has a thorough understanding of the requirements and associated risks, and is able, willing and competent to devote the resources necessary to meet the requirements and has valid and practical solutions for all requirements and potential risk areas. Respond to all requirements of the solicitation. Do not alter or rearrange the solicitation. The burden of proof for all the evaluation factors identified in this solicitation rests with the offeror. The offerors are advised that the Government may incorporate into the final contract enhancing features included in the Offeror’s proposal deemed beneficial to the Government. With the exception of the Price Volume, no cost or pricing information should appear in any other volume. Alternate proposals are not acceptable.
In presenting material in the proposal, the offeror is advised that quality of information is more important than quantity. Clarity, brevity, and logical organization should be emphasized during proposal preparation. It is the responsibility of the offeror to present enough information to allow the various work efforts, support, and management approaches, as well as price, to be meaningfully evaluated without discussions. Statements that the prospective offeror understands, can or will comply with the specifications, and paraphrasing the requirements or parts thereof without supporting information are considered inadequate and may render a rating of unsatisfactory.
For the purpose of this acquisition, relevance is defined as something that has a logical connection with the matter under consideration. Such aspects or relevance include the type of effort (e.g. development, production, repair), the type of requirements (e.g. weapon systems, information systems, engineering services, scheduled depot maintenance), service similarity, service complexity, contract type, contract dollar value, the division of the company that will perform the work, and participation of Principal Subcontractors, Team Members, or Critical Team Members.
The offeror must include any data necessary to illustrate the adequacy of the various assumptions, approaches, and solutions to problems. Failure to clearly and positively address a specific factor or sub-factor may be considered a deficiency. There is no need to repeat information in more than one volume if an overlap exists; the detailed information must be included in the most logical place and summarized and referenced in other areas. Unnecessarily elaborate brochures or other presentation materials beyond that sufficient to present a complete and effective proposal is neither necessary nor desired.
Offerors are expected to comply with all requirements of the RFP. The Government advises offerors that taking exception or deviating from any term or condition of the RFP may make an offer unacceptable, and the offeror ineligible for award, unless the RFP expressly authorizes such an exception or deviation with regard to that specific term or condition. The Government may consider any exception or deviation to any term or condition of the RFP that is not expressly authorized by the RFP to be a deficiency, as defined in FAR 15.001.
2.0 PROPOSAL FORMAT
Written proposals must be formatted using a Times New Roman 12 pt normal font (no reduction permitted), single-spaced with 1-inch margins all around, and formatted for standard 8.5 x 11 inch paper. All pages should be numbered with section and page numbers. When foldout pages are used they must not exceed 11 x 17 inches and will be counted as 1 page. Drawings may be provided separately and may be any size but should be folded to approximately 8.5 x 11 inch standard size and will count as 1 page. Graphs shall be presented in no smaller than a 10 pt font and should contain a grid, which allows values to be read directly from the graph to the same accuracy that a 10 x 10 to the ½ inch grid provides. Graphic resolution should be consistent with the purpose of the data presented.
3.0 PROPOSAL CONTENT AND VOLUMES
Each volume of the proposal shall be submitted as one original in electronic format as specified in the table below.
Submission of all volumes of the Original proposal to the email address provided in section 4.0 will determine timeliness of receipt. Page limitations for each volume if any, are also specified in the table below as follows (title and table of contents pages do not count towards page limit). Proposal pages beyond a specified maximum limit, if any, will not be reviewed as part of the evaluation.
Volume Number Volume Title Written Page Limit Copies Required 1 TECHNICAL 50 1 Original
2 PAST PERFORMANCE 15 1 Original
3 PRICE ** 1 Original
** The offeror should submit a complete, executed solicitation document (Standard Form 1449). One original copy of the Price Proposal should be provided. That contractor shall ensure that all certifications and representations required within Section K of the solicitation have been accurately completed on SAM at www.sam.gov.
Each volume must contain the following information:
Cover and title page Title of proposal and proposal number as applicable Offeror’s name, address, cage code, DUNS number, and POC RFP number Proposal volume/book number Table of Contents (The table of contents must provide sufficient detail to enable easy location of important elements)
The offeror shall submit a Cross Reference Matrix (CRM) for the Technical Volume, similar to the example below, to help ensure that all solicitation requirements are addressed and to facilitate the evaluators’ review of the offeror’s proposal. The CRM should be a single integrated matrix and cross-reference the proposal volumes and paragraphs to specific RFP requirements, as well as other parts of the proposal that contain relevant information. The offeror’s CRM may be identical to the example below or revised such as to add columns to indicate the page number on which information may be found, identify where other relevant information in the proposal is located, or provide other comments. The CRM does not count against any of the proposal page limitations.
EXAMPLE OF A CROSS REFERENCE MATRIX (CRM)
Proposal Instructions Government PWS/SOW
Evaluation Factor Offeror’s Proposal Reference
CLIN
Reference
Proposal Instructions Government PWS/SOW
Evaluation Factor Offeror’s Proposal Reference
CLIN
Reference
Volume 1 Technical
Example: Para 3.1 Note: This column shall address all paragraphs in Sections xx and xy of the Performance Specification
1.A Provide reference to your Proposal Volume I – Technical. Example:
Refer to appropriate page number in your written proposal
3.1 VOLUME 1 – TECHNICAL
The offeror shall provide all information and data required to conduct a thorough and complete technical evaluation.
The offeror shall address the following in the proposal: (Note: This volume shall not contain any reference to cost or price aspects of the offer).
Technical Description - Include overall dimensions, salient characteristics, major component identification, required options and accessories, material used in construction, and a sample of the proposed commercial equipment technical manual(s)/data sheet(s). Identify all software and system components that meet specification. A cross reference matrix (CRM) is required that links to each Navy technical specification element to the proposed hardware that will fill the requirement. Reference information is required in the CRM that shows where in the proposal literature the information can be found that demonstrates compliance for each technical element.
Elaborate on and discuss warranties, technical certifications, calibration/certificate of conformance and any specialized equipment used to test and calibrate. Provide any additional information required to service, support and calibration all system components, adapters, cables and/or kits. Identify those items (subassemblies, circuit cards) that are uniquely recommended for return to vendor (service, repair or calibration).
3.2 VOLUME 2 – PAST PERFORMANCE
Past performance data submitted must have a logical connection to the requirement set forth in the Statement of Work/Specification. Offerors shall submit the following information as part of their proposal for both the offeror and proposed major subcontractors. List performance data on three (3) most recently completed current Federal government contracts (not to have exceeded 3 years since completion) for similar equipment. If offerors do not have three Federal contracts, State, local or commercial contracts can be used to complete this requirement. Offerors that are newly formed without prior contracts should list contracts and subcontracts as required above for all personnel with significant roles in contract performance. Use Attachment 1 to supply data.
Past Performance Evaluation Data Sheet (Attachment 3) shall be completed by the offeror in its entirety for each contract.
Failure to submit the past performance evaluation data sheet, with the proposal, shall be considered certification (by signature on the proposal) that the contractor has no past performance for similar items. The Government reserves the right to use past performance information obtained from these sources or from sources other than those identified by the offeror, such as the Navy’s Contractor Performance Assessment Reporting System (CPARS). Since the Government may not necessarily interview all sources provided by the offeror, it is incumbent upon the offeror to explain the relevance of the data provided. The burden of providing thorough and complete past performance information remains with the offeror. If you are aware of any situation that may negatively impact your past performance ratings please discuss the situation and how it was remedied.
3.3 VOLUME 3 – PRICE
Offeror shall fill out Section B of the Request for Proposal in its entirety.
4.0 PROPOSAL SUBMISSION:
Clearly mark all packages with the solicitation number. The submission date for all Volumes, shall be no later than 20 January 2017 @ 1500 Pacific Time .
Proposals shall be submitted via email to Brandon Zellers at brandon.zellers@navy.mil
Proposals must be valid for 120 days after the date specified for receipt of proposals.
5.0 CLASSIFIED DATA
All proposals must be UNCLASSIFIED
(End of Summary of Changes)
File details come from the government source that posted it. Updated .