RFQ_Navy_6116965_B.pdf
PDF 288 KB Posted
- Attached to
- Machining Parts
- Solicitation number
- N64267-15-T-0003
About this file
Attachment 1 Navy Drawing
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Questions_C.pdf | ||
| Attachment_3_Picture.jpg | JPG image | |
| Questions_B.pdf | ||
| Questions_A.pdf | ||
| Attachment_1_Picture.jpg | JPG image | |
| Attachment_2_Picture.jpg | JPG image | |
| RFQ_N64267-15-T-0003.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
D
C
B
A
12345678
A
B
C
D
8 7 6 5 4 3 12
DISTRIBUTION STATEMENT F
FURTHER DISTRIBUTION ONLY AS DIRECTED BY
NAVAIR OR HIGHER DOD AUTHORITY; OCT 1993
CAD MAINTAINED CHANGES SHALL BE
INCORPORATED BY THE DESIGN ACTIVITY.
NOTES:
1. MARK THUS:
U.S.N. INSP
GAGE DWG.
SER NO.
2. DIMENSIONS FLAGGED SHALL BE INSPECTED
AT EACH CERTIFICATION OF GAGE.
MARK LATEST
REVISION LETTER
TO BE FILLED IN BY THE
NAVY GAGE FACILITY
-A-
-B-
-A-
-B-
-A-
-B-
-A-
-B- -A-
-B--A-
-B-
-A-
-B-
-B-
-C-
-B-
-C-
G G
40.00
REVISIONS
REV DESCRIPTION DATE APPROVED
A SEE NOR 3-28-95
B SEE NOR 8-25-10 HM
DEPARTMENT OF THE NAVY
NAVAL SYSTEMS COMMAND
WASHINGTON, D.C. 20360
GAGE (INSP))
MMC ENVELOPE OF
G.M. EX-44 MOD 1
FIXTURE
SIZE
D
CAGE CODE NO.
53711
DRAWING NO.
6116965
SCALE = 1/8 SHEET 1 OF 15
PRODUCT ENGINEERING DIRECTORATE
NAVAL SURFACE WARFARE CENTER
CORONA DIVISION
CORONA, CA 92878-5000
PRO.MG. D. LEE 11-27-91
INSP. J. HUNT 11-27-91
CHECK D. MARCROFT 11-27-91
DESIGN D. LEE 9-1-91
APPROVED FOR:
NAVSEA
BY DIRECTION:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCES
.X DECIMAL ±
.XX DECIMAL ± .03
.XXX DECIMAL ± .010
ANGLE ± 2°
BREAK ALL SHARP EDGES
.030 EXCEPT AS NOTED
DO NOT SCALE THIS DRAWING
INTERPRET DRAWING IN
ACCORDANCE WITH MIL-STD-100
AND ANSI Y14.5M-1994
FOR GENERAL SPECIFICATIONS
FOR MANUFACTURE SEE
MIL-G-10944
CAD SYSTEM: Pro-E WildFire 2.0
ATTRIBUTES INSPECTED ON COMPONENT #
L5494447, 6383939
COMPONENT FEATURE ATTRIBUTES INSPECTED
3. BLACK OXIDIZE/BLACK ANODIZE ALL
NON-GAGING SURFACES.
4. GAP BETWEEN SUPPORT RAIL SECTIONS (ITEM 27)
CAN BE UP TO .20".
5. SHIM SUPPORT RAIL SECTIONS (ITEM 27) TO
GRANITE SURFACE (ITEM 1) AS REQUIRED.
ITEMS 28 AND 29 SHALL BE INTERCHANGEABLE.
BOTH ITEMS SHALL MEET POSITIONAL
REQUIREMENTS AT ASSEMBLY. POSITIONAL
TOLERANCES APPLY WHEN ITEM 31 IS PINNED.
7. UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS
MMC ENVELOPE AND CONNECTOR LOCATION
OF GUIDED MISSILE ROUND PACK EX-44 MOD 1
GRANITE
SURFACE
SEE DETAIL A
FWD
1/2SCALE
ADETAIL
6.
A7
A4
A4
A7 6
A6
A3
73 39
13 61
A4
A4
A
A
D
D
C
C
E
E
B
B
M
M N
N
-B-
-B-
-B-
B
A
12345678
A
B
C
D
8 7 6 5 4 3 12
DISTRIBUTION STATEMENT F
FURTHER DISTRIBUTION ONLY AS DIRECTED BY
NAVAIR OR HIGHER DOD AUTHORITY; OCT 1993
T T
3.25
4.16
1.37
P.F. W/ ITEM 59
C'BORE FAR SIDE
.750
2.68
3.00
.88
4X .22
1.44
.50
2X .31 .45
.62
.31
.38
2X 45° X .12
4.00
17X 10.00 17X 1.00 X 1.50
SST STL INSERT
EPOXY IN PL
17X .313-18
.62 DEEP
3.00
8X 6.00
16.75 5.75
6.63
12.12
92X 2.38 X 2.00
SST STL INSERT
EPOXY IN PL (6.00 )(6.00 )
14X 9.00
10X 1.38 X 1.50
SST STL INSERT
EPOXY IN PL 1.60
2X .75
71.68
1.60
19.00
5X 2.63
3X 2.88
51.57
180.00
30.00
20.00
2.75 ±.05
12.25
8.88
(2.88)
2X .44
.31
4X (.188)
S.F. W/ITEM 64
MATCH W/ITEM 21
8X #10-24
.63 DEEP
MATCH W/ITEM 21
.19
(.280 )
2X .25 2X .38
8.00 (3.75 ) 1.62
(.50 ) .50
2X ( .250)
P.F. W/ITEM 60
MATCH W/ITEM 5
4X .250-20
MATCH W/ITEM 5
.31
1.75
SIZE
GAGE CODE NO.
53711
NAVAIRSYSCOM DWG. NO.
6116965
REV
B
SCALE=NOTED SHEET 7 OF 15
DEPARTMENT OF THE NAVY
WASHINGTON, D.C.
CHECKED D. MARCROFT 11-27-91
DRAWN D. LEE 9-1-91
NO. ITEM QTY DESCRIPTION
1 GRANITE W/STAND 1 STANDRIDGE OR EQ GRADE AA
2 WIDE FLANGE I BEAM 3 W4X13 (MODIFY), JORGENSEN OR EQ
3 WIDE FLANGE I BEAM 7 W4X13 (MODIFY), JORGENSEN OR EQ
4 PLATE 3 MACH. STEEL
6116965 - GRADE AA GRANITE
WITH STAND (NOT SHOWN), 2 SWIVEL AND
2 FIXED CASTERS.
DRILL BOLT AND DOWEL HOLES AT ASSY.
SET ALL INSERTS .06 BELOW SURFACE.
SCALE: 1/8
6116965
ITEM 2 ONLY
.188 DOWEL, #10-24 THD
MATCH W/ITEM 4
LOCATE AT ASSY
.0005 A
VIEW T-T
MIN RELIEF
2 PL
.0008
.0005 A
-A-
MATL: W4X13
WIDE FLANGE I BEAM
MODIFY AS SHOWN
NORMALIZE AFTER WELD
REQD: ITEM 2=3
ITEM 3=7
SCALE: 1/2
2X #8-32
MATCH W/ ITEM 24
2X ( .188)
P.F. W/ ITEM 64
G
.25
.25
6116965 - PLATE
MATL: MACH STEEL
REQD: 3
SCALE: 1/1
2X #10-24
BOTH ENDS
.62 DEEP
G
G
2 3 4 nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line
B
A
12345678
A
B
C
D
8 7 6 5 4 3 12
DISTRIBUTION STATEMENT F
FURTHER DISTRIBUTION ONLY AS DIRECTED BY
NAVAIR OR HIGHER DOD AUTHORITY; OCT 1993
3.75
.502X 1.13 2.75
1.75
.75
( ) THRU
P.F. W/ ITEM 58
LOCATE AT ASSY
.750
.38
2X THRU.28
( ).28
2X ( )
P.F. W/ ITEM 60
.250
( .500)
S.F. AT ASSY
.380
2X .080
.060 FLAT
.75
2.25
45° x .06
.38
( .375)
P.F. W/ ITEM 577.00
20.00
5.00
1.68
2X 6.75
1.38
6.50
2X 28°
10X .50
6.75
2X 1.50
2X .50
4X 1.00
2X
C'BORE FOR ITEM 52
MATCH W/ ITEM 11
.22
.62
2.75
2X (.37 )
.75
45° x .06
3.00
2X .50
1.25
1.50 1.75
2X THRU.28
2X ( )
P.F. W/ ITEM 60
.250
2X .31
2X .31
( ).28
.50
.68
2X .56
2.630
.63
2X 3.75
2X 2.25
2X R.50
2X R.12
( .500) THRU
S.F. W/ ITEM 8
LOCATE AT ASSY
2X #8-32
MATCH W/ ITEM 24
.63 DEEP
GAGE CODE NO.
53711
NAVAIRSYSCOM DWG. NO.
6116965
REV
B
SCALE = 1/2 SHEET 8 OF 15
DEPARTMENT OF THE NAVY
WASHINGTON, D.C.
CHECKED FH 654
DRAWN SDFG 654
NO. ITEM QTY DESCRIPTION
5 BRIDGE 5 ALUM 6061-T6 HARD ANODIZE
6 HOUSING 2 MACH STEEL
7 LOCATOR 2 TOOL STEEL, HDN R/C 58-62
8 PIN 2 TOOL STEEL, HDN R/C 58-62
9 HANDLE 10 ALUM
6116965 - BRIDGE
MAT'L: ALUM 6061-T6
HARD ANODIZE
REQ'D: FIVE (5)
6116965 - LOCATOR
MAT'L: TOOL STEEL R/C 58-62
REQ'D: 2
SCALE: 1/1
6116965 - PIN
MAT'L: TOOL STEEL
HDN: RC 58-62
REQ'D: 5
SCALE: 1/1
6116965 - HOUSING
MAT'L: MACH STEEL
REQ'D: TWO (2)
SCALE: 1/1
6116965 - HANDLE
MAT'L: ALUM
REQ'D: 10
SCALE: 1/1
G
G
4X ( .250)
P.F. W/ ITEM 60
8X .28 THRU
CBORE FOR .25-20 SHCS
G
2X ( .313)
P.F. W/ ITEM 54
LOCATE AT ASSY
1.00 DEEP
6X .250-20
1.00 DEEP
LOCATE AT ASSY
3X 45° X .09
2X 45° X .19
MED KNURL
XX6
nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Callout Leave Oversize nicholas.goldberg Text Box
B
A
12345678
A
B
C
D
8 7 6 5 4 3 12
DISTRIBUTION STATEMENT F
FURTHER DISTRIBUTION ONLY AS DIRECTED BY
NAVAIR OR HIGHER DOD AUTHORITY; OCT 1993
-A- -B-
-C-
-A-
-B-
-C-
3.38
.50
1.38
1.50
2.00
(.75 )
P.F. W/ ITEM 58
LOCATE AT ASSY
.750
2X .29
2X ( )
P.F. W/ ITEM 60
.250
( ).250
1.38
.850 ±.001
(.625 )
.330
(.567 )
DET. AT ASSY
69° 2.00
R.185
.37
2X -20
.31 DEEP
.250
10° .100
.700
3X .50
3X 20°
9.00
R 3.620
7.50
2X 4.220
2X +.0002 -.0000
TOOLING HOLE .75 DEEP
.5000
2X 4.000
2X .50
4X .75
.62
2X X 1.00
PULL DOWEL P.F.
.250
2X .75
.500 2.38
2X -20
.75 DEEP
.250
4.50
2X 2.880
1.50
2X 2.772
(.020)
3.937 ±.002
(.020 )
2X 1.000
2X .62
1.68
2X .38
.44
.62
.35
.62
.31
1.75
2X .48 .31
45.0°
135.0°
6X .250-20
SCREW, SHC
.63
7.20
9.00
2X R.31
2X ( .500)
TOOLING HOLE
SEE NOTE 1
(R )3.620
( .313)
SEE NOTE 1
6X ( .290)
SEE NOTE 1
+.001.415 -.000
.75
15°
(.37 )
(.75 )
2X R 1.00
4X #10-24
.50 DEEP
BOTH SIDES
(8 HOLES)
2X .50
2.00
1.125 5.20
2X #10-24
1.00 DEEP
BOTH ENDS
2X .220
2X .450
8X NO. 10-24
MATCH W/ ITEM 204X ( .188)
S.F. W/ ITEM 64
GAGE CODE NO.
53711
NAVAIRSYSCOM DWG. NO.
6116965
REV
B
SCALE = 1/2 SHEET 9 OF 15
DEPARTMENT OF THE NAVY
WASHINGTON, D.C.
CHECKED D. MARCROFT 11-27-91
DRAWN D. LEE 9-1-91
NO. ITEM QTY DESCRIPTION
10 TEMPLATE ASSEMBLY 1 TOOL STL HDN R/C 58-62
101 EXTENSION 2 MACH STL
11 SADDLE TEMPLATE 1 TOOL STL HDN R/C 58-62
12 NOT USED
13 SHOE 1 TOOL STL HDN R/C 58-62
14 SHOE 1 TOOL STL HDN R/C 58-62
15 LOCATOR 3 MACH STL
6116965 - SHOE
MAT'L: TOOL STEEL
HDN: R/C 58 - 62
REQ'D: ONE (1)
SCALE: 1/1
6116965 - SADDLE TEMPLATE
MAT'L: TOOL STEEL
HDN: R/C 58 - 62
REQ'D: TWO (2)
6116965 - LOCATOR
MAT'L: MACH STEEL
REQ'D: THREE (3)
SCALE: 1/1
6116965 - SHOE
MAT'L: TOOL STEEL
HDN: R/C 58 - 62
REQ'D: ONE (1)
SAME DIMENSIONS
AS ITEM 12
EXCEPT MIRROR IMAGE
2X 45° X 2.00
2X 45° X .09
B
A D
C
SEE NOTE 1
EXTENSION
MACH STEEL
2 REQ'D
6116965 - TEMPLATE ASSEMBLY
MAT'L: TOOL STEEL
HDN: R/C 58-62
REQ'D: ONE (1)
NOTE:
1. CONSTRUCT ENVELOPE, TOOLING HOLES,
BOLT AND DOWEL HOLES TO DIMENSIONAL
REQUIREMENTS SHOWN ON PIECE 17.
2. ENVELOPE PROFILE REQUIREMENT DOES NOT
APPLY BETWEEN PTS A, B AND BETWEEN
PTS C, D.
2X .29
MATCH W/ ITEM 14
4X ( .3125)
DOWEL P.F.
.0005 C
.0005 A B C
4X 45° X .06
3X 45° X .19
2X 45° X .06
2X R.041
.35 X 45°
3X R.62
15 14 nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Text Box
B
A
12345678
A
B
C
D
8 7 6 5 4 3 12
DISTRIBUTION STATEMENT F
FURTHER DISTRIBUTION ONLY AS DIRECTED BY
NAVAIR OR HIGHER DOD AUTHORITY; OCT 1993
-B-
-C-
-A-
-B-
-C-
-A-
-B-
-C-
-A-
(3.25 )
(2.63 )
(1.75 )
1.31
(2.88 )
9.00
7.20
.62
1.640
2X ( )
S.F. W/ ( .190) DOWEL
.1875
2X THRU
C'BORE .422
.30 DEEP
.290
9.00
7.20
.62
2X R 3.620
2X 28°
2X 4.000
.38
2.38
2X +.0002 -.0000
TOOLING HOLE
.5000
2X
P.F. W/ ITEM 54
MATCH W/ ITEM 5 AT ASSY
.313
6X THRU
MATCH W/ ITEM 5 AT ASSY
.29
9.00
7.20
.63
2X ( ) TOOLING HOLE
SEE NOTE 1
.500
6X ( ) THRU
SEE NOTE 1
.290
2X 45° X .09
.375
( ) DOWEL.156
4X ( ) THRU
P.F. W/ ( .156) X 1.00 DOWEL
.156
(9.00 )
(3.25 )
(6.00 )
2X (.19 )
2X .750
2X 3.402 ±.001
.020+.0011.794 -.000 2X .020
5.838
2X 1.000
2X .020
+.00057.2280 -.0000
2X ( .188)
P.F. W/ ITEM 64
3.40
4.747
1.28
2.250
8.00
4.25
1.00
1.00
2X .500
2X R.327
( R )3.620
2X 2.556 2X 1.250
2X .400
2X .213
2X 1.146
2X .313
6X #8-32 THRU
2X .250-20 THRU
2X ( .3125) DOWEL
SEE NOTE 1
( 7.2280)
(4.50 )
.38
.38
4X ( .22)
2X ( .188)
P.F. W/ ITEM 64
GAGE CODE NO.
53711
NAVAIRSYSCOM DWG. NO.
6116965
REV
B
SCALE = 1/2 SHEET 10 OF 15
DEPARTMENT OF THE NAVY
WASHINGTON, D.C.
CHECKED D. MARCROFT 11-27-91
DRAWN D. LEE 9-1-91
NO. ITEM QTY DESCRIPTION
16 TEMPLATE 1 TOOL STEEL, HDN R/C 58-62
17 TEMPLATE 4 TOOL STEEL, HDN R/C 58-62
18 TEMPLATE 1 TOOL STEEL, HDN R/C 58-62
19 TEMPLATE 1 TOOL STEEL, HDN R/C 58-62
20 THOMSON PILLOW BLOCK 28 THOMSON OR EQ (SPN-16-OPN)
21 THOMSON PILLOW BLOCK 4 THOMSON OR EQ (TWN-16-OPN)
6116965 - TEMPLATE
MAT'L: TOOL STEEL
HDN: R/C 58-62
REQ'D: ONE (1)
6116965 - TEMPLATE
MAT'L: TOOL STEEL
HDN: R/C 58-62
REQ'D: ITEM 18=1
ITEM 19=1
THOMSON
TYPE TWN-OPN
PILLOW BLOCK
PART NO: TWN-16-OPN (SEE NOTE)
MODIFY AS SHOWN
THOMSON
OPEN PILLOW BLOCK
PART NO: SPB-16-OPN (SEE NOTE)
MODIFY AS SHOWN
NOTE: THIS ITEM, ALONG WITH
ITEMS 27 AND 63, MAY BE
ORDERED AS SYSTEM 1CB-16-HAO
L=180.00 FROM THOMSON INDS.
NOTE: CONSTRUCT TOOLING HOLES, BOLT AND DOWEL HOLES
TO DIMENSIONAL REQUIREMENTS SHOWN ON PIECE 17.
NOTE: PROFILE TOLERANCE
DOES NOT APPLY AT THE
TWO .327 RADIUS
G TANGENT TO R 3.620
G
NOTE: THIS ITEM,
ALONG WITH ITEMS 27
AND 63, MAY BE
ORDERED AS SYSTEM
1CB-16-FAO L=180.00
FROM THOMSON INDS.
2X 45° X .09
2X 45° X 2.00
.0005 A B C
SEE NOTE
.0005 A B C
6116965 - TEMPLATE
MAT'L: TOOL STEEL
HDN: R/C 58-62
REQ'D: FOUR (4)
NOTE:
1. CONSTRUCT ENVELOPE, TOOLING HOLES,
BOLT AND DOWEL HOLES TO DIMENSIONAL
REQUIREMENTS SHOWN ON PIECE 17.
SEE NOTE 1
2X 45° X 2.00
.001 A B C
SEE VIEW A
FOR ITEM 19
VIEW A
(FOR ITEM 19 ONLY)
SCALE = 1/4
.001 A B C
20 21
18 19 nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line
B
A
12345678
A
B
C
D
8 7 6 5 4 3 12
DISTRIBUTION STATEMENT F
FURTHER DISTRIBUTION ONLY AS DIRECTED BY
NAVAIR OR HIGHER DOD AUTHORITY; OCT 1993
1.00
.31
.25
.50 2X .19
.060
2.00
S.F. W/ ITEM 29
1.500
4.00
2.00
2X -20.250
4X .31
2X (.250 )
(.850 )
2X .31
2X ( )
S.F. W/ ITEM 64
.190
.63
45° X .06
R.06
1.000
2.110
2X .270
.310
1.299
.618
.150
28°
.600
.444
1.636
170°
2X 47°
( 1.00)
(2.12 ) 1.50
(24.00)
3X ( .250)
P.F. W/ ITEM 60
LOCATE W/ ITEM 1 AT ASSY
6X .28 FOR ITEM 61
LOCATE W/ ITEM 1 AT ASSY
(3.00 )
3X .45
(3.00 )(9.00 )
TO SUIT
1.25
#10-24
MATCH W/ ITEM 30
2X ( .188)
P.F. W/ ITEM 67
LOCATE AT ASSY
.200
(.213 )
(1.146 )
(1.190)
(.313 )
1.120
(2.156 )
(1.250 )
.200 (.400 )
±30'62°
2X .544
2X ±30'47°
2.780
1.25
2.54
+.0101.456 -.000
15°
R.18
R.62
2X R +.010 -.000.060
R.06
R.37
.380 (.194 )
+.000.180 -.010
2X ( .156)
P.F. W/ ITEM 34
LOCATE W/ ITEM 16
AT ASSY
+.03.18 -.00
3X .188
C'BORE FOR ITEM 53
MATCH W/ ITEM 16
4X R .118
.750
.910
1.500
.310
(.365 )
GAGE CODE NO.
53711
NAVAIRSYSCOM DWG. NO.
6116965
REV
B
SCALE = 1/2 SHEET 11 OF 15
DEPARTMENT OF THE NAVY
WASHINGTON, D.C.
CHECKED D. MARCROFT 11-27-91
DRAWN D. LEE 9-1-91
NO. ITEM QTY DESCRIPTION
22 STRIKE PLATE 1 TOOL STL HDN R/C 58-62
23 STRIKE PLATE 1 TOOL STL HDN R/C 58-62
24 RETAINER 4 MACHINE STEEL
25 CONNECTOR PLATE 1 TOOL STL HDN R/C 58-62
26 LATCH PLATE 1 TOOL STL HDN R/C 58-62
27 SHAFT SUPPORT, MODIFIED AR THOMSON OR EQ, L=180.00
( .250)
6116965 - STRIKE PLATE
MAT'L: TOOL STEEL
HDN: R/C 58-62
REQ'D: ONE (1)
SCALE: 1/1
6116965 - CONNECTOR TEMPLATE
MAT'L: TOOL STEEL
HDN: R/C 58-62
REQ'D: ONE (1)
SCALE: 1/1
SAME DIMENSIONS
AS ITEM 22
EXCEPT MIRROR IMAGE
6116965 - RETAINER
MAT'L: MACH STEEL
REQ'D: FIVE (5)
SCALE: 2/1
6116965 - LATCH PLATE
MAT'L: TOOL STEEL
HDN: R/C 58-62
REQ'D: ONE (1)
SCALE: 1/1
SHAFT SUPPORT
THOMSON SR-16
MODIFY AS SHOWN
G
SEE DETAIL A
R.75
G
R.031
2X 45° X .090
2/1SCALE
ADETAIL
2X 45° X .09
G
23 24
26 27 nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Text Box nicholas.goldberg Line nicholas.goldberg Line
B
A
12345678
A
B
C
D
8 7 6 5 4 3 12
DISTRIBUTION STATEMENT F
FURTHER DISTRIBUTION ONLY AS DIRECTED BY
NAVAIR OR HIGHER DOD AUTHORITY; OCT 1993
(20.00 )
(6.75 )
4X .62
4X R.38
6.75
3.25
6X
MATCH W/ ITEM 5
.29.50
(.610 )
DET. AT ASSY
.22
2X ( )
S.F. W/ ITEM 67
LOCATE AT ASSY
.188
2X .25
1.00
.25
2.00
.900
.20
( 1.500)
S.F. W/ ITEM 25
1.90
.50 MED. KNURL
45° X .06
.22
1.50 .75
R.06
2X 2.25
4X 1.00
2X 1.50
2X 3.75
2X .50
1.00
3.13
FULL RADIUS
"B" +.0000 -.0005
SEE POSITIONING
REQMT AT ASSY
+.0000"A" -.0005
SEE POSITIONING
REQMT AT ASSY
GAGE CODE NO.
53711
NAVAIRSYSCOM DWG. NO.
6116965
REV
B
SCALE = 1/2 SHEET 12 OF 15
DEPARTMENT OF THE NAVY
WASHINGTON, D.C.
CHECKED D. MARCROFT 11-27-91
DRAWN D.LEE 9-1-91
NO. ITEM QTY DESCRIPTION
28 PIN 1 TOOL STL HDN R/C 58-62
29 PIN 1 TOOL STL HDN R/C 58-62
30 RETAINER 1 TOOL STL HDN R/C 58-62
31 BRIDGE 1 ALUM (MAKE FROM PIECE 5)
32 SPACER 10 MACH STEEL
51 SCREW, SHC 1/4-20 X 1.75 AR COML
52 SCREW, SHC #10-24 X 1.00 AR COML
53 SCREW, SHC #8-32 X .38 AR COML
54 PULL DOWEL .313 X 1.00 14 JERGENS 31701 OR EQ
55 BUSH (.500) X 3/4 X 2.00 2 HD. P.F. COML
56 DOWEL .156 X 1.00 2 COML
57 DOWEL .375 X 2.50 5 COML
58 BUSH (.500) X 3/4 X .75 5 HD. P.F. COML
59 BUSH (.500) X 3/4 X 1.75 5 HD. P.F. COML
60 DOWEL .250 X 1.25 20 COML
61 SCREW, SHC 1/4-20 X 1.25 AR COML
62 SCREW, BHSC #10-24 X 1.00 2 COML
63 SHAFT ( 1.000), 4X L=180.00 AR THOMSON OR EQ (FOR SYSTEM INFO,
SEE NOTES ON ITEMS 20, 21 SHT 10)
64 DOWEL .188 X .50 62 COML
65 PULL DOWEL .313 X 1.50 2 JERGENS 31703 OR EQUIV
66 WASHER (TO SUIT) AR COML
67 DOWEL .188 X .50 2 COML
68 PULL DOWEL .250 X .75 78 JERGENS 31741 OR EQ
69 DIAL INDICATOR 2 FEDERAL B8-I WITH 4 INCH STEM
70 RUBBER BUMPER 14 MCMASTER-CARR 9540K22 OR EQ
71 NO. 10-24 X .75 SET SCREW 2 COML
72 .250-20 X 2.50 SHCS 2 COML
73 NO. 10-24 X .50 BHSCS 16 COML
ITEM NO. REQ'D "A" "B"
28 1 .0620 1.1280
29 1 .0710 1.1460
6116965 - RETAINER
MAT'L: TOOL STEEL
HDN: R/C 58-62
REQ'D: ONE (1)
SCALE: 2/1
6116965 - PIN
MAT'L: TOOL STEEL
HDN: R/C 58-62
6116965 - BRIDGE
MAKE FROM PIECE FIVE (5)
MAT'L: ALUM 6061-T6
HARD ANODIZE
REQ'D: ONE (1)
SCALE: 1/2
6116965 - SPACER
MAT'L: ALUM 6061
REQ'D: TEN (10)
SCALE: 1/2
G G
G
GRIND FLAT FOR
SLIP FIT SURFACE
MIN RELIEF
MIN RELIEF
31 32
28 29 nicholas.goldberg Line nicholas.goldberg Text Box #28
ONLY
nicholas.goldberg Line
B
A
12345678
A
B
C
D
8 7 6 5 4 3 12
DISTRIBUTION STATEMENT F
FURTHER DISTRIBUTION ONLY AS DIRECTED BY
NAVAIR OR HIGHER DOD AUTHORITY; OCT 1993
.88
2.88
1.00
.85
.50
.88
(1.775 )
1.00
.375
.44
1.25
2.00
1.12
1.00
.50
.38
2X .210
.19
4X R.12
.050
.50
3.00
.060
4.4090
S.F. AT
ASSY
4.00
2X 1.00
2X 1.25 .375
45° x .050
.50
10-24
2.000
10-24
.25 DEEP
2X .29
C'BORE FOR
.250-20 SHCS
( .563) THRU
S.F. W/ ITEM 35
.500-20
THRU
3.75
.50
.50
1.00
.125 PIN
P.F.
.80
.37
R.06
.50
.25
.22 P.F.
1.50 2X .31
.63
.375 X .563 X 1.00
BUSHING, THIN WALL
P.F.
.75
1.25
NO. 10-24
.38 DEEP
GAGE CODE NO.
53711
NAVAIRSYSCOM DWG. NO.
6116965
REV
B
SCALE = 1/1 SHEET 13 OF 15
DEPARTMENT OF THE NAVY
WASHINGTON, D.C.
CHECKED D. MARCROFT 11-27-91
DRAWN D. LEE 9-1-91
NO. ITEM QTY DESCRIPTION
33 HOUSING 1 MACH STEEL
34 POWER SCREW 2 SEE DETAIL
35 BUSHING .375 X .563 X 1.00 2 BUSHING, THIN WALL (MODIFY)
36 SET MASTER 1 TOOL STEEL, RC 58-62
37 SPACER 2 MACH STEEL
38 CLAMP 184 TOOL STEEL, RC 58-62, STRESS RELIEF
39 BACK STOP 8 ALUM
6116965 - HOUSING
MAT'L: MACH STEEL
REQ'D: TWO (2)
6116965 - POWER SCREW
REQ'D: TWO (2)
SCALE: 2/1
6116965 .375 X .563 X 1.00
BUSHING, THIN WALL
MODIFY AS SHOWN
SCALE: 2/1
6116965 - SET MASTER
MAT'L: TOOL STEEL RC 58-62
REQ'D: ONE (1)
SCALE: 1/2
6116965 - BACK STOP
MAT'L: ALUM
REQ'D: EIGHT(8)
6116965 - SPACER
MAT'L: MACH STEEL
REQ'D: TWO (2)
6116965 - CLAMP
MAT'L: TOOL STEEL
RC 58-62, STRESS RELIEF
REQ'D: 184
#10-24
3X 45° X .06
.500-20 THREAD
TEFLON
2X 45° X .05
MED KNURL
ALUM KNOB
2X 45° X .06
G
G
.265 THRU
.390 C'BORE
.190 DEEP
33 34
35 36 39
37 38 nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Line nicholas.goldberg Callout Leave Oversize
B
A
12345678
A
B
C
D
8 7 6 5 4 3 12
DISTRIBUTION STATEMENT F
FURTHER DISTRIBUTION ONLY AS DIRECTED BY
NAVAIR OR HIGHER DOD AUTHORITY; OCT 1993
4.500
.0005 A B
7.2280 +.0005 -.0000
5.220
(.020 )
2X 4.000 4X .75
16X NO. 10-24
MATCH W/ ITEM 21
AT ASSY
8X ( .188)
S.F. W/ ITEM 64
2X .63
8X .31
4X .31
.62
8.00
2X 3.70
4X .370
(.500)
TOOLING HOLE
2X 3.250
.31
.250 X 1.00
PULL DOWEL
P.F.
.250-20
SCREW, SHC
9.00
4.500
2X 1.50
2X .75
5.200
2X .5000 +.0002 -.0000
TOOLING HOLE
GAGE CODE NO.
53711
NAVAIRSYSCOM DWG. NO.
6116965
REV
B
SCALE = 3/4 SHEET 14 OF 15
DEPARTMENT OF THE NAVY
WASHINGTON, D.C.
CHECKED D. MARCROFT 11-27-91
DRAWN D. LEE 9-1-91
NO. ITEM QTY DESCRIPTION
42 TEMPLATE ASSEMBLY 2
TEMPLATE ASSEMBLY
REQ'D: TWO (2)
TEMPLATE
TOOL STEEL
RC 58-62
6X
.250-20 BOLT
.250 DOWEL
CONSTRUCTION
SUPPORT
MACH STEEL
BOTTOM PLATE
MACH STEEL
.0005 A B
-A-
-B-
| Pages from 6116965_B |
| RFQ_Navy_6116965_B |
| Sheet 1 |
| Views |
| new_view_1 |
| A |
| top_28 |
| G |
| Sheet 2 |
| Views |
| new_view_8 |
| left_9 |
| new_view_178 |
| Sheet 3 |
| Views |
| new_view_16 |
| left_17 |
| new_view_30 |
| new_view_35 |
| new_view_44 |
| new_view_45 |
| H |
| Sheet 4 |
| Views |
| new_view_21 |
| left_22 |
| Sheet 5 |
| Views |
| new_view_24 |
| new_view_25 |
| Sheet 6 |
| Views |
| new_view_53 |
| new_view_54 |
| F |
| Sheet 7 |
| Views |
| new_view_58 |
| T |
| left_62 |
| new_view_67 |
| bottom_69 |
| new_view_72 |
| top_73 |
| bottom_74 |
| right_75 |
| Sheet 8 |
| Views |
| new_view_76 |
| bottom_77 |
| new_view_78 |
| right_79 |
| new_view_80 |
| right_81 |
| new_view_82 |
| right_83 |
| new_view_84 |
| Sheet 9 |
| Views |
| new_view_86 |
| left_87 |
| left_88 |
| new_view_89 |
| right_90 |
| bottom_91 |
| new_view_92 |
| bottom_93 |
| new_view_94 |
| left_95 |
| new_view_96 |
| left_97 |
| right_98 |
| top_99 |
| new_view_102 |
| Sheet 10 |
| Views |
| new_view_104 |
| left_105 |
| new_view_106 |
| left_107 |
| new_view_108 |
| left_109 |
| new_view_110 |
| bottom_111 |
| new_view_114 |
| bottom_115 |
| new_view_116 |
| Sheet 11 |
| Views |
| new_view_119 |
| right_120 |
| right_120 |
| right_120 |
| new_view_133 |
| right_134 |
| A |
| new_view_137 |
| left_138 |
| new_view_139 |
| right_140 |
| new_view_141 |
| right_142 |
| top_144 |
| new_view_145 |
| left_146 |
| Sheet 12 |
| Views |
| new_view_148 |
| right_149 |
| new_view_150 |
| new_view_151 |
| right_152 |
| new_view_153 |
| left_154 |
| Sheet 13 |
| Views |
| new_view_156 |
| right_157 |
| new_view_159 |
| right_160 |
| new_view_162 |
| new_view_163 |
| new_view_165 |
| right_166 |
| new_view_168 |
| right_169 |
| new_view_170 |
| right_171 |
| Sheet 14 |
| Views |
| new_view_173 |
| bottom_174 |
| right_175 |
| Sheet 15 |
| Views |
| new_view_179 |
| new_view_180 |
| new_view_181 |
File details come from the government source that posted it. Updated .