Questions_B.pdf
PDF 97 KB Posted
- Attached to
- Machining Parts
- Solicitation number
- N64267-15-T-0003
About this file
Answers to RFIs
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Questions_C.pdf | ||
| Attachment_3_Picture.jpg | JPG image | |
| Questions_A.pdf | ||
| Attachment_1_Picture.jpg | JPG image | |
| Attachment_2_Picture.jpg | JPG image | |
| RFQ_N64267-15-T-0003.pdf | ||
| RFQ_Navy_6116965_B.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Q: Which parts would require Black Oxide Finishing?
A: All steel parts.
Q: How many pieces are required for item # 8? The BOM and the drawing differ.
A: 5 pcs
Q: How many pieces are required for item # 11? The BOM and the drawing differ.
A: 2 pcs
Q: How many pieces are required for item # 24? The BOM and the drawing differ.
A: 5 pcs
Q: How many pieces are required for item # 33? The BOM and the drawing differ.
A: 2 pcs
Q: How much oversize do we leave the .500 dia. on item # 8?
A: .010
Q: What is the material for item # 35?
A: Mild steel, any grade
Q: What is the .500‐20 threaded shaft on item # 34 made from?
A: All-thread, any type of steel
Q: Is the Teflon piece threaded on the O.D. after assembly?
A: The Teflon (or delrin) piece has a protruding male part that presses into a female socket on the all-thread. This part needs to be made smaller than the ID of the thread to allow the part to thread in and out of the housing without the need for removal.
Q: How much oversize de we leave item # 36?
A: .020 total (.010 each side)
Q: Where is the (2) 1.00 radius’s on item # 13? It is not clear on the drawing?
A: This is part of the "ramp" into the slot of the shoe. We can provide a CAD file for this part if needed during production.
File details come from the government source that posted it. Updated .