25Q4057_Statement Of Work_07022025.pdf
PDF 276 KB Posted
- Attached to
- 25Q4057 - Fall Safety Railings Federal contract opportunity
- Solicitation number
- N6339425Q4057
About this file
This Statement of Work (SOW) details the requirements for designing, fabricating, and installing fall safety railing systems for two Navy training facilities at Naval Station Mayport in Jacksonville, FL. The Naval Surface Warfare Center Port Hueneme Division (NSWC PHD) seeks a contractor to develop bolt-together aluminum railing systems that will surround three sides of two Navy Training Systems, each capable of supporting 3-4 personnel working on top of the module.
The specific locations are the Mission Module Readiness Center (MMRC) at 1801 Freedom Way Bldg. 2517 and the Surface Combat Systems Training Center (SCSTC) at 2527 Baltimore Street Bldg. 2527. The railings must be 1-1/2" schedule 40 mill finish aluminum, with dimensions and spacing to be provided by the government. The contractor will be required to submit designs for government approval before fabrication, and a joint final inspection will be conducted after installation. No security clearance is required, and all work must adhere to applicable federal safety instructions, with work to be performed and delivered in English.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 25Q4057_Single Image of Example_07162025.pdf | ||
| 25Q4057_Updated Schematic of WZ Walls Safety Railing_07142025.pdf | ||
| 25Q4057_0001_Amended Solicitation_SAM Fall Safety Railing_07182025.pdf | ||
| 25Q4057_Tie Down Point for Fall Safety Railing_07172025.pdf | ||
| 25Q4057_Fall Safety Railings_Solicitation_07022025.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work Fall Safety Railing System for MK61 SSMM Weapons Zone (WZ) Walls
Mission Module Readiness Center (MMRC) and Surface Combat Systems Training Center (SCSTC) Mayport FL (LTF Mayport)
1. INTRODUCTION
Naval Surface Warfare Center Port Hueneme Division (NSWC PHD) Maintenance Planning & Product Support Infrastructure (E27) acts as a Training Support Agent for Littoral Combat Ships (LCS) training programs. The NSWC PHD requirements under this procurement will support the LCS Surface Warfare (SUW) training plan to implement fall safety railing system.
2. OBJECTIVE
The objective of this contract is to develop, fabricate, and install a bolt-together system of railings and posts to provide fall-safety railings to surround three (3) sides of two (2) Navy Training Systems.
3. SCOPE OF WORK.
NSWC PHD is requesting a two (2) complete Fall Safety Railing System to be designed, fabricated, and installed by the contractor. Formal engineered drawing for design will not be included in this effort. Completed Fall Safety Railing System will be installed at two separate locations:
- Mission Module Readiness Center (MMRC)
- Surface Combat Systems Training Center (SCSTC)
Both are located on Naval Station Mayport, FL.
4. SAFETY AND SECURITY
4.1 Base Access
Navy Base access will be required. Naval Station Mayport Pass and Security Offices will assist members with base access.
MMRC Mayport and SCSTC Mayport facility access will be coordinated by NSWC PHD and Contractor.
4.2 Security Clearance Requirements
Contractors required will not need access to classified spaces; therefore, a security clearance is not required.
4.3 Safety
All applicable Federal safety and/or local instructions shall be adhered to during the performance of this contract.
4.4 Non-US Citizens
Non-US Citizens shall not provide these services.
5. SERVICES REQUIRED
5.1 MMRC Mayport: 1801 Freedom Way Bldg. 2517, Jacksonville, FL 32228 Contractor will design a Fall Safety Railing System to surround three (3) sides of Navy Training System which supports 3-4 personnel working on top of the module at any given time and allows adequate spacing for sliding of hatches atop the training system.
Dimensions and spacing will be provided by the government. The government will provide final approval before fabrication may begin.
Contractor will fabricate a bolt-together, 1-1/2” schedule 40 mill finish, aluminum railings and posts for implementation into a Fall Safety Railing System.
The contractor will install Fall Safety Railing System to three (3) sides of the Navy Training System located at MMRC Mayport: 1801 Freedom Way Bldg. 2517, Jacksonville, FL 32228. The government and contractor will perform a Joint Final Inspection of Fall Safety Railing System against the approved design.
5.2 SCSTC Mayport: 2527 Baltimore Street Bldg. 2527, Jacksonville, FL 32228 Contractor will design a Fall Safety Railing System to surround three (3) sides of Navy Training System which supports 3-4 personnel working on top of the module at any given time and allows adequate spacing for sliding of hatches atop the training system.
Dimensions and spacing will be provided by the government. The government will provide final approval before fabrication may begin.
Contractor will fabricate a bolt-together, 1-1/2” schedule 40 mill finish, aluminum railings and posts for implementation into a Fall Safety Railing System.
The contractor will install Fall Safety Railing System to three (3) sides of the Navy Training System located at SCSTC Mayport: 2527 Baltimore Street Bldg. 2527, Jacksonville, FL 32228. The government and contractor will perform a Joint Final Inspection of Fall Safety Railing System against the approved design.
7. LANGUAGE OF WORK
Work will be performed and delivered in English.
8. APPLICABLE DOCUMENTS
8.1 DON Fall Protection Guide
8.2 OPNAVINST 5100.23
8.3 29 CFR 1926.500, Subpart M
8.4 29 CFR 1910
8.5 ANSI/ASSP A1264.1 (R2007)
File details come from the government source that posted it. Updated .