N6339422R0002_0002.pdf

CODE

(Hour)

PAGE(S)

until 04:00 PM local time 06 Feb 2024

X

A X B X C X D

EX

X

G F 228 - 241

242 - 258 X H 259 michael.j.collazo2.civ@us.navy.mil

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA FAR (48 CFR) 53.214(c)

DO-A5 1 264

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N63394 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

MICHAEL J COLLAZO 805-982-0606

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

1 - 11 12 - 147

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

148 - 170 171 - 173

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

174 - 179 180 - 194

X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 195 - 205 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 206 - 208 X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIONS AND INSTRUCTIONS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

209 - 226

PART II - CONTRACT CLAUSES

NAVAL SURFACE WARFARE CENTER

4363 MISSILE WAY,

PORT HUENEME CA 93043-4307

(805) 228-8287

805-228-6299FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.5. DATE ISSUED

31 Oct 2023

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N6339424R0002

Section SF 30 - BLOCK 14 CONTINUATION PAGE

GENERAL INFORMATION

Amendment 0002 Summary:

The purpose of this amendment is to provide answers to offeror questions, instruct offerors to use different minimum bend radii for drawings 7111122 and 7111129, update the Cross Reference Matrix contained in Section L paragraph 1.13.3, and extend the proposal submission deadline.

1. Two additional questions were received in reference to N6339424R0002. An answer from NSWC PHD follows below each question.

1. Please clarify the inconsistencies on delivery within the SOW. We recommend all deliveries either 40 weeks after DO award or FAT acceptance, if FAT is needed.

Section 3.8.1, pg. 159 states, “First Article parts identified in Table 1 shall be delivered within four months of the Effective Date of the Delivery Order Award. 3.8.1.3 Deliveries for all other parts and kits on subsequent Delivery Orders shall begin delivery within 26 weeks of the Effective Date of the Delivery Order Award; the remaining balance of parts and kits shall be delivered within 40 weeks of the Effective Date of the Delivery Order Award as specified in section F.

Section F of the Solicitation states 40wks ADC.

The last section of the Cross Reference Matrix pg. 251, for SOW 3.8.1.3 states, “Deliveries for all other parts and kits on subsequent Delivery Orders shall begin delivery within six months of the Effective Date of the Delivery Order Award; the remaining balance of parts and kits shall be delivered within nine months of the Effective Date of the Delivery Order Award.

Answer: Please see the revision to the Section L Cross Reference Matrix included in Amendment 0002.

2. We’ve run into a few drawings, such as 7111129 and 7111122, calling for bend radii that appear impossible to achieve. Have these parts been previously manufactured as drawn?

According to bend radii tables for this material and temper (5052-H32), we can suggest the following bend radii –

7111129 Material Thickness - .090” Bend Radius on dwg - .008” Suggested min bend Radius - .090”

7111122 Material Thickness - .25” Bend Radius on dwg - .10” Suggested min bend Radius - .38”

Answer: Offerors shall utilize the minimum bend radii for drawings 7111129 and 7111122 required by Amendment 0002.

2. Offerors may utilize a minimum bend radius of 0.020” in lieu of the 0.008” bend radius shown for drawing 7111129. An updated drawing will not be provided.

3. Offerors may utilize a minimum bend radius of 0.380” in lieu of the 0.100” bend radius shown for drawing 7111122. An updated drawing will not be provided.

4. The Cross Reference Matrix in Section L paragraph 1.13.3 is revised as follows:

From:

SOW 3.8.1.3. Deliveries for all other parts and kits on subsequent Delivery Orders shall begin delivery within six months of the Effective Date of the Delivery Order Award; the remaining balance of parts and kits shall be delivered within nine months of the Effective Date of the Delivery Order Award.

Factor 1 Element 1.2

<Provide reference to the page/paragraph in the Offeror’s Proposal>

To:

SOW 3.8.1.3. Deliveries for all other parts and kits on subsequent Delivery Orders shall begin delivery within 26 weeks of the Effective Date of the Delivery Order Award; the remaining balance of parts and kits shall be delivered within 40 weeks of the Effective Date of the Delivery Order Award.

Factor 1 Element 1.2

<Provide reference to the page/paragraph in the Offeror’s Proposal>

5. The proposal submission deadline is hereby extended to 4:00 PM Pacific Standard Time on 06 February 2024.

Note: Offerors are advised to ensure the proper configuration of their domain settings prior to emailing NSWC PHD. If you are waiting on a response from the Government call Contract Specialist Michael Collazo at (805) 982- 0606.

All other terms and conditions remain unchanged.

Amendment 0002 Summary End.

Amendment 0001 Summary:

The purpose of this amendment is to provide NSWC PHD's answers to questions which were received for N6339424R0002. In addition, the amendment contains corrections to part numbers, revisions to Section L, and annotated updates to Attachments J-02, J-04, and J-06.

1. In Section B, CLIN 0001, the PN 8749486-01 Management Cable Arm is hereby deleted and the PN 8749486 Cable Management Arm is hereby substituted in lieu thereof.

2. In Section B, CLIN 0105, the PN 8749486-01 Management Cable Arm is hereby deleted and the PN 8749486 Cable Management Arm is hereby substituted in lieu thereof.

3. Section B CLIN 0218 is reserved.

4. In Section B page 15, Part Numbers 7111116, 7111117, 7111126, 7111129, 7111122-1 and 7111124-1 are deleted from the parts lists for CLIN 0008, 1THWK-KIT08 and CLIN 0009, 1THWK-KIT09.

5. Section J Attachment J-02 Drawing Revision List is revised as follows:

a. Red font indicates revision. Red strikethrough indicates deletion.

b. Support drawing 8749339 DRAM, Rev C is added to CLIN 0138.

c. Support drawing 8749339 DRAM, Rev C is added to CLIN 0139.

d. Support drawing 8749339 DRAM, Rev C is added to CLIN 0140.

e. Support drawing 8749339 DRAM, Rev C is added to CLIN 0141.

f. Support drawing 8749339 DRAM, Rev C is added to CLIN 0142.

g. Support drawing 8749339 DRAM, Rev C is added to CLIN 0143.

h. Support drawing 8749339 DRAM, Rev C is added to CLIN 0144.

i. Support drawing 8749339 DRAM, Rev C is added to CLIN 0145.

j. Support drawing 8749541 Cable Assembly, RMP DC Power, Rev A is added to CLIN 0153.

k. Support drawing 8749542 Cable Assembly, RMP Motherboard Power, Rev B is added to CLIN 0153.

l. Support drawing 8749543 Cable Assembly, RMP Aux Power, Rev B is added to CLIN 0153.

m. Support drawing 8749601 Interconnect Diagram, Advanced Tactical Display Center, Rev D is added to

CLIN 0204.

n. Support drawing 8749510 Rail, Optical Drive Mounting is added to CLIN 0219.

o. Support drawing 8749527 Adapter, Rail, Optical Drive B, Left Side, Rev A is added to CLIN 0219.

p. Support drawing 8749528 Adapter, Rail, Optical Drive B, Right Side is added to CLIN 0219.

q. Support drawing 8749529 Door Optical Drive B is added to CLIN 0219.

r. Support drawing 8749383 Label, NAVAIR is added to CLIN 0220.

s. Support drawing 8749563 Cable Assy, Power Safe, Rev 2 is added to CLIN 0234.

t. Support drawing 8749564 Duct ATX RMP, Rev 1 is added to CLIN 0234.

u. Under CLIN 0105, Part Number 8749486-01 is deleted and the Part Number 8749486 is hereby substituted in lieu thereof.

v. Under CLIN 0204, Part Number 8749645-01, support drawing 8749645 Rev 1 is deleted and support drawing 8749645 Rev 2 is hereby substituted in lieu thereof.

w. Under CLIN 0205, Part Number 8749645-02, support drawing 8749645 Rev 1 is deleted and support drawing 8749645 Rev 2 is hereby substituted in lieu thereof.

x. Under CLIN 0231, drawing 8749645 Rev 1 is deleted and drawing 8749645 Rev 2 is hereby substituted in lieu thereof.

y. Under CLIN 0234, Part Number 8749372-01, support drawing 8749372 Rev 1 is deleted and support drawing 8749372 Rev 2 is hereby substituted in lieu thereof.

z. CLIN 0218 is reserved.

6. Section J Attachment J-04 Offeror Pricing Matrix is revised as follows:

b. Under CLIN 0105, Part Number 8749486-01 is deleted and the Part Number 8749486 is hereby substituted in lieu thereof.

c. CLIN 0218 is reserved.

7. Section J Attachment J-06 Kit Content List is revised as follows:

b. Under CLIN 0001, Part Number 8749486-01 is deleted and the Part Number 8749486 is hereby substituted in lieu thereof.

c. Part Numbers 7111116, 7111117, 7111126, 7111129, 7111122-1 and 7111124-1 are deleted from the parts lists for CLIN 0008, 1THWK-KIT08 and CLIN 0009, 1THWK-KIT09.

8. Section J is revised to include Attachment J-07 Additional TDP Drawings. The matrix below defines the added drawings, whether they supersede drawings in Attachment J-01 TDP, and identify relevant updates to the solicitation and its attachments:

Attachment J-07 Additional TDP Drawings

Drawing Supersedes J-01 J-02 J-04 J-06 Section B Kit List Section B

8749339 Rev C N/A Updated N/A N/A N/A N/A

8749372 Rev 2 8749372 Rev 1 Updated N/A N/A N/A N/A

8749383 N/A Updated N/A N/A N/A N/A

8749541 Rev A N/A Updated N/A N/A N/A N/A

8749542 Rev B N/A Updated N/A N/A N/A N/A

8749543 Rev B N/A Updated N/A N/A N/A N/A

8749563 Rev 2 N/A Updated N/A N/A N/A N/A

8749564 Rev 1 N/A Updated N/A N/A N/A N/A

8749601 Rev D N/A Updated N/A N/A N/A N/A

8749645 Rev 2 8749645 Rev 1 Updated N/A N/A N/A N/A

9. Section L 1.8.10 page limitation for Volume III is revised from “5” to “5 per PPIF / Up to 3 PPIF may be submitted.”

10. Section L 1.12.1(i) is revised from “Cover Letter” to “Cover Page.”

11. Section L 1.13.3(i) is updated to list Element 1.1 and Element 1.2 in the Cross Reference Matrix in relation to

SOW 3.4.6.

12. Section L 1.14.1(i) is revised from “Cover Letter” to “Cover Page.”

13. Section L 1.14.1(v) is revised from “Past Performance Proposal” to “Past Performance Information Forms and Additional Pages.”

14. Section L 1.15.4 is added: “In addition to the first two pages of each PPIF (Attachment J-05), offerors may submit up to three additional pages per PPIF. A maximum of five pages per PPIF will be considered. A maximum of three PPIF will be considered.”

15. Offeror Questions and NSWC PHD Answers

A total of thirty-two questions were received in reference to N6339424R0002. An answer from NSWC PHD follows below each question.

1. Attachment+J-06+Kit+Content+List for 1THWK-KIT01 shows the Part Number 8749486-01. The Part

Number is one part of the 8749486 assembly. Is the intent to provide the entire assembly or only the 8749486- 01 piece of the 8749486 assembly?

Answer: The intent is to provide the entire assembly Part Number 8749486. In Amendment 0001 for CLIN 0001, the PN 8749486-01 Management Cable Arm is deleted and the PN 8749486 Cable Management Arm is substituted in lieu thereof. In amendment 0001 for CLIN 0105, the PN 8749486-01 Management Cable Arm is deleted and the PN 8749486 Cable Management Arm is substituted in lieu thereof. Section B, Attachment J-02 Drawing Revision List, Attachment J-04 Offeror Pricing Matrix, and Attachment J-06 Kit Content List are updated accordingly.

2. The following drawings were not provided as part of the TDP. Can the government please provide:

8749383 LABEL

8749541 CABLE ASSEMBLY, RMP DC POWER (W2)

8749542 CABLE ASSEMBLY, RMP MOTHERBOARD POWER (W3)

8749543 CABLE ASSEMBLY, RMP AUX POWER (W4)

8749339 RAM (32 GB)

7111124 CABLE, POWER, PRINTER

8749511 ADAPTER, RAIL, OPTICAL DRIVE A, LEFT SIDE

8749512 ADAPTER, RAIL, OPTICAL DRIVE A, RIGHT SIDE

8749513 DOOR OPTICAL DRIVE A"

Answer: The following drawings were inadvertently left off the drawing revision list J-02 as support drawings and will be provided in Attachment J-07 Additional TDP Drawings to all offerors who requested and received the initial TDP. A new request for the additional drawings is not needed.

8749383 LABEL

8749541 CABLE ASSEMBLY, RMP DC POWER (W2)

8749542 CABLE ASSEMBLY, RMP MOTHERBOARD POWER (W3)

8749543 CABLE ASSEMBLY, RMP AUX POWER (W4)

8749339 RAM (32 GB)

7111124 CABLE, POWER, PRINTER was listed incorrectly and is not utilized. Please see updates to Attachment J-06 Kit Content List.

The following drawings are not used (CLIN 0218 is now reserved via Amendment 0001):

8749511 ADAPTER, RAIL, OPTICAL DRIVE A, LEFT SIDE

8749512 ADAPTER, RAIL, OPTICAL DRIVE A, RIGHT SIDE

8749513 DOOR OPTICAL DRIVE A

Also see updates to Attachment J-02 Drawing Revision List.

3. 8749558 Find no. 8 requires Part Number 8749503-03. The 8749503 drawing only has a “-01” and “-02” version of the part. Can the government please confirm the intent is that the “-03” call out on the 8749558 is supposed to say “-02”? Note the 8749558 is required on 12 different CLINs.

Answer: Drawing 8749503-03 is mistakenly shown on the parts list. 8749558 Part Number 8749503-03 should be interpreted as 8749503-02. An updated drawing will not be provided.

4. Drawing 8749562 states: “SEE TABLE 2” for length requirements. There is no Table 2 on this drawing. Can the government please provide the table or clarify?

Answer: The required length is 7.0" +/-0.5"

5. From the Solicitation, section 3.4.6. states: “The contractor shall be responsible to manufacture, using design details provided by the Government, the Commercially Available Off-the-shelf (COTS) parts listed below in the event they are not commercially available.” It then goes on to list the following two Part Numbers:

SLSATACDADAP & SLIM-7P-ADPT. In anticipation of these parts not being commercially available can the government please provide the design details for these parts in order to gather the costs related to manufacturing the items?

Answer: Drawings 8749368, 8749369 and 8749370, included in Attachment J-01 TDP, contain the design details for this item.

6. From the Solicitation, Item f on page 238 (Section L, 1.7) indicates that all files must be compatible with Microsoft Office 2016 however, Item g on page 239 indicates .pdf as a file extension. Will the Government confirm if files other than spreadsheets can be provided as .pdf documents?

Answer: PDFs are allowable for the submission of documents other than spreadsheets. All PDFs must be searchable.

7. From the Solicitation, Section L instructions (1.8.4) indicate the offeror should include the CAGE Code and DUNS number on proposal covers. Will the Government confirm whether UEI numbers are desired in the place of DUNS, in addition to DUNS, or not at all?

Answer: Please provide the CAGE and DUNS. A UEI number is optional.

8. From the Solicitation, Section L, 1.12.1 and 1.14.1 indicate a "cover letter" to be provided with Volumes II and III. However, Section L, 1.8.1 specifically stipulates that a Letter of Transmittal shall be included with Vol. 1.

Does the Government require letters in Volumes II and III, or should Sections 1.12.1 and 1.14.1 indicate "Cover Page" instead of "Cover Letter?

Answer: Sections 1.12.1 and 1.14.1 should indicate "Cover Page" instead of "Cover Letter." See Amendment 0001 detail above.

9. From the Solicitation, Section L, 1.13.3 indicates that offerors must provide a CRM identical to the table provided in the RFP. However, the table does not include all SOW areas. Will the Government confirm that offerors are to include in the CRM table only those SOW areas indicated in the example provided in the RFP?

Answer: Offerors shall use the exact CRM that is included in the RFP.

10. Can you please confirm whether or not there is a central parts list or Bill of Materials (BOM) in .xlsx format for the entire TDP?

Answer: Confirmed. There is no central parts list. The parts lists only exist on the individual drawings themselves.

11. Page 245; Section L 1.15: Does Attachment J-05 Past Performance Information Form count against the page limit for Volume III?

Answer: Each PPIF is limited to 5 pages. The instructional pages (3-4) may be deleted from the PPIF.

Information in-excess of the five-page limitation for each PPIF will not be considered. Please see question 13.

12. Page 245; Section L 1.15: Are we allowed to modify fields on the attachment J-05?

Answer: No.

13. Page 245; Section L 1.15: Are additional pages allowed?

Answer: In addition to the first two pages of each PPIF form (Attachment J-05), offerors may submit up to three additional pages per PPIF. A maximum of five pages per PPIF will be considered. A maximum of three PPIF will be considered.

14. Page 245; Section L 1.15: What is the page limit per Past Performance Reference?

Answer: Each PPIF is limited to 5 pages. Up to three PPIF may be submitted.

15. Page 245; Section L 1.15: The instructions on the Past Performance Information form Attachment J-05 instructions state the following: "If the offeror requires additional space to discuss problems and corrective actions, up to three additional pages may be provided for this purpose only." This statement implies that Offerors can have more than the 5 page limit for the past performance volume. Please clarify the limit to the past performance volume and sections.

Answer: Please reference the Government's answers to questions 11 and 13.

16. Page 241; Section L 1.13; Factor 1 states: "The Offeror shall address its ability and approach to perform each of the requirements of the solicitation." Is the offeror expected to address each and every line of the SOW and the solicitation or just the requirements listed in the CRM that start on page 243? There is some confusion between the CRM and the Section L 1.13.

Answer: Each and every line of the SOW does not need to be addressed in a table. The CRM highlights specific items that shall be addressed and the location referenced. The offeror shall review the Evaluation Factors in Section M for guidance on how the Government will evaluate the proposal.

17. Page 144; SOW 3.5.2.4; What operating system (OS) will be used for the functional testing and finished product?

Answer: The specific diagnostic tool is not specified by contract requirements. It is up to the offeror to determine the best tool to verify functionality per requirements. The tool is not a deliverable to the Navy.

18. Page 143; SOW 3.5.1; If material has an excessive long lead time, will the government adjust the delivery date for the first article testing?

Answer: The government will review delivery dates on a case by case basis.

19. Page 141; SOW 3.2.2; If the Government revises the drawings, will the contractor be given the option to update pricing upon a significant TDP/drawing revision?

Answer: Please refer to FAR 52.243-1 Changes--Fixed Price

20. Page 157; Clause C-209-H002; Page 157, clause C-209-H002 states "Any changes to tools, material, or methods after the first article approval shall be documented by the contractor and approved by the Contracting Officer before they are used." If there are changes required and submitted for approval, what is the turnaround time for approval?

Answer: Government approval turnaround time varies and is on a case by case basis.

21. Are you able to provide the drawings below so we complete proposal to the subject RFP? We reviewed all drawings in the TDP, and the ones below are missing.

PART NUMBER DRAWING BASE P/N NOMENCLATURE

7110914 <<<NEED DRAWINGS LINE FILTER, 10AMP

8501756 <<<NEED DRAWINGS SINGLE OUTPUT POWER SUPPLY

8501763 <<<NEED DRAWINGS FIBER TO RS-232 CONVERTER

8749331 <<<NEED DRAWINGS KVM SWITCH

8749339 <<<NEED DRAWINGS RAM (32 GB)

8749348 <<<NEED DRAWINGS FIBER TO RS-232 CONVERTER

7111124-1 <<<NEED DRAWINGS CABLE, POWER, PRINTER

8748642-01 <<<NEED DRAWINGS REI INTERFACE, FRONT

8749383-01 <<<NEED DRAWINGS LABEL, NAVAIR

8749472-01 <<<NEED DRAWINGS BRACKET, KVM SWITCH

8749541-01 <<<NEED DRAWINGS CABLE ASSEMBLY, RMP DC POWER (W2)

8749542-01 <<<NEED DRAWINGS CABLE ASSEMBLY, RMP MOTHERBOARD POWER (W3)

8749543-01 <<<NEED DRAWINGS CABLE ASSEMBLY, RMP AUX POWER (W4)

8749654-01 <<<NEED DRAWINGS FRAME, MONITOR, STANDARD

Answer:

For the following drawings, see answer to question 2:

7111124-1 CABLE, POWER, PRINTER

8749339 RAM (32 GB)

8749383-01 LABEL, NAVAIR

8749541-01 CABLE ASSEMBLY, RMP DC POWER (W2)

8749542-01 CABLE ASSEMBLY, RMP MOTHERBOARD POWER (W3)

8749543-01 CABLE ASSEMBLY, RMP AUX POWER (W4)

For 8748642-01 REI INTERFACE, FRONT, the correct drawing number is 8749642-01 REI INTERFACE, FRONT, which was included in Attachment J-01 TDP.

The following drawings are only applicable to configurations not part of this solicitation and therefore are not required:

7110914 LINE FILTER, 10AMP

8501756 SINGLE OUTPUT POWER SUPPLY

8501763 FIBER TO RS-232 CONVERTER

8749331 KVM SWITCH

8749348 FIBER TO RS-232 CONVERTER

8749472-01 BRACKET, KVM SWITCH

8749654-01 FRAME, MONITOR, STANDARD

Please refer to Attachment J-07 Additional TDP Drawings, and updates to Attachment J-02 Drawing Revision List, and Attachment J-06 Kit Content List.

22. Referencing Solicitation document (dated 31 Oct 2023), Statement of Work Section 3.1.4, pg.140, para 1 – Is it the government’s intent for the offeror to include a full Counterfeit Material Prevention Plan within the technical proposal or summarize with the expectation that a formal plan be submitted post award? If a formal plan is to be submitted now, where would the government like to see this addressed and will the government extend the page count to allow adequate room to discuss or can the plan be excluded from the page count?

Answer: Offerors may include their Counterfeit Material Prevention Plan as an attachment to Volume II. The Counterfeit Material Prevention Plan will not be counted against the page limitation.

23. Will the government consider extending the past performance volume page count to 10pgs?

Answer: Please reference the Government's answers to questions 11 and 13.

24. Will 3D models in .igs or .step files for the metal parts be available after award to help reduce machine shop programming time?

Answer: 3D models are not available for this procurement.

25. Please provide the following missing drawings from the TDP:

a. Missing drawing for PN: 7111124-1 called out under Kit#8 (1THWK-KIT08)

b. Missing drawings 8749511, 8749512, and 8749513 reporting to 8749812-01

c. Missing drawing 8749383 called out under 8749814-01 ITEM 2

d. Missing drawing 8501756 called out under 8501800-02 ITEM 20

e. Missing drawing 8749601 referenced in drawing 8749645 NOTE 2

Answer:

a. Please see the answer to Question 2

b. Please see the answer to Question 2

c. Please see the answer to Question 2

d. Please see the answer to Question 21

e. Subdrawing 8749601, 8749601 Rev D, is provided in Attachment J-07 Additional TDP Drawings.

Please see the answer to Question 26 regarding drawing 8749645.

Please see update to Attachment J-02 Drawing Revision List.

26. Drawing 8749645 Rev 1 shows the same quantities for items in the -01 and -02 configuration. However, on sheet 3 of 5 it looks like ITEM 18 is only used on the -01 and ITEM 19 is only used on the -02. Also ITEM 31 on the parts list is not called out anywhere in the drawing. Please provide corrected parts list on sheet 1 of DWG 8749645 Rev 1.

Answer: A new revision of subdrawing 8749645, 8749645 Rev 2, is provided in Attachment J-07 Additional TDP Drawings. Please see update to Attachment J-02 Drawing Revision List.

27. What is the Part Number for ITEM 45 on drawing 8749558 sheet 2 of 5? It is blank on the drawing.

Answer: Please ignore. Item 45 is not used in assembly and will be deleted.

28. DWG 8749562 Rev 1 references TABLE 2 for the length but TABLE 2 is nowhere to be found in the drawing.

Answer: Please see the answer to Question 4.

29. Drawing 8749372 Item 5 & 6 have the same Part Number. Is this a typo because the same Part Number is called out twice in this kit?

Answer: A new revision of subdrawing 8749372, 8749372 Rev 2, is provided in Attachment J-07 Additional TDP Drawings. In addition, new subdrawings 8749564 Rev 1 and 8749563 Rev 2 are provided in Attachment J- 07 Additional TDP Drawings. Please see update to Attachment J-02 Drawing Revision List.

30. The Cross-Reference Matrix calls out the following requirement from SOW 3.4.6: 3.4.6. The contractor shall be responsible to manufacture, using design details provided by the Government, the Commercially Available Off-the-shelf (COTS) parts listed below in the event they are not commercially available. The price of items (CLINS 0011-0013, CLINS 0138-0145, and CLIN 0153) which include the listed components shall be computed on the assumption that the items must be manufactured.

3.4.6.1. Part Number: SLSATACDADAP (BACKPLANE, 2-1/2"", SLIMLINE SATA, OPTICAL DRIVE)

3.4.6.2. Part Number: SLIM-7P-ADPT (BACKPLANE, 2-1/2"", SLIMLINE SATA, OPTICAL DRIVE) Proposed Action/Change: It is stated that this requirement is to be referenced in Factor 1, Element 1.2:

PHYSICAL ASSETS TO BE USED IN PRODUCTION (Section L.1.13.2). Requesting clarification if this requirement should be referenced in Factor 1, Element 1.1 - PRODUCTION ASSEMBLY IN ACCORDANCE WITH THE TDP (Section L.1.13.1) and not in Element 1.2.

Answer: Both elements shall be addressed in the technical volume. Please see the updated CRM in Section L.

31. Drawing 8749339 is missing from the Technical Data Package.

Proposed Action/Change: Request provisioning of Drawing 8749339.

Answer: Please see Question 2.

32. Is our understanding that country-of-origin requirements per section 3.7.1.1 do not apply to fasteners, subcomponents used in cable assemblies and subcomponents used in PCA/CCAs correct?

To clarify the intent of our asked question, it is our understanding that the Government, in requesting the requirement stated in 3.7.1.1, has the intent of tracking country-of-origin for components that could, by being counterfeit (reference SOW 3.1.4, 3.3.2, 3.3.6) or by containing malicious code (SOW 3.6.5), introduce a level of vulnerability into the supply chain. Since the fasteners and subcomponents used in cable and PCA/CCAs cannot introduce a vulnerability into the supply chain due to the lack of software/firmware on these individual items and counterfeit issues are not of concern at this level either, we are proposing that these country-of-origin requirements exclude this level of subcomponent/fasteners as tracking these items does not further the purpose of preventing vulnerability.

Answer: The requirements of 3.7.1.1 do apply to fasteners, subcomponents used in cable assemblies, and subcomponents used in PCA/CCAs.

Note: Offerors are reminded to utilize only the information in contained in this solicitation and the attachments thereto to generate their proposal. Pricing based on drawings which have not been incorporated into this solicitation will be deemed unacceptable.

The proposal submission deadline remains 5 January 2024 at 4:00 PM Pacific Standard Time.

All other terms and conditions remain unchanged.

Amendment 0001 Summary End.

Section B - Supplies or Services and Prices

FIVE YEAR ORDERING PERIOD

MAXIMUM QUANTITY CLINs

CLINs, SLINs or other provisions in this contract set forth estimated quantities to be ordered. Offerors should use those estimated quantities for planning purposes and in the preparation of its proposals including its price proposal.

The Government may need to issue orders which exceed these estimated maximum quantities. The IDIQ resulting from this solicitation will have a maximum amount the Government may order under the entire IDIQ. The Government may place orders for quantities which exceed the estimated maximum quantity for each line item. As such, the Government may place orders at any time which consume the contract total value with respect to the dollar ceiling established.

KIT CLINS AND CONTENTS

CLINS 0001 through 0018, which are Part Numbers 1THWK-KIT01 through 1THWK-KIT18, represent assemblies (referred to as ‘kits’ hereafter) which contain individual parts that can be identified by their matching with subsequent CLINS in the quantities listed in Attachment J-06, Kit Content List. CLINS 0001 through 0018 are individually and independently priced. Items ordered under CLINS 0019-0235 are delivered in addition to any identical parts which are incorporated into kits ordered under CLINS 0001-0018.

NOTE: DFARS 252.211-7003

DFARS 252.211-7003 Item Unique Identification and Valuation shall apply to all items, including individual parts within kits, with a unit price above $5,000. Kits are priced individually and separately from their individual parts.

However, if a kit contains a part which has a unit price above $5,000 when not incorporated into the assembly, the part is subject to the requirements of DFARS 252.211-7003.

ITEM(S) 0001 - CLIN 0001 KIT CONTENTS

CLIN 0001 KIT CONTENTS 1THWK-KIT01

Part Number Nomenclature CLIN QTY 8749430-01 Bracket, PCP 0093 2

8749452-01 BRACKET, ROUTER LEFT 0095 1

8749452-02 BRACKET, ROUTER RIGHT 0096 1

8749470-01 BRACKET, AUX LEFT 0099 1

8749470-02 BRACKET, AUX RIGHT 0100 1

8749480-01 MC BRACKET 0102 2

8749486 MANAGEMENT CABLE ARM 0105 8

8749487-01 MANAGEMENT CABLE ADAPTER 0106 2

8749487-02 MANAGEMENT CABLE ADAPTER 0107 1

8749487-03 MANAGEMENT CABLE ADAPTER 0108 4

8749487-04 MANAGEMENT CABLE ADAPTER 0109 1

8749488-01 BRACKET, MANAGEMENT ARM 0110 7

8749488-02 BRACKET, MANAGEMENT ARM 0111 1

8749490-01 BRACKET, SLIDE, UPS 0112 2

8749526-01 BRACKET, SLIDE, LEFT, RMP 0151 3

8749526-02 BRACKET, SLIDE, RIGHT, RMP 0152 3

8749554-01 PLATE, CABLE RETAINER 0164 4

8749555-01 BAR, CABLE RETAINER 0165 2

8749814-01 Rack Assembly 0220 1

ITEM(S) 0002 - CLIN 0002 KIT CONTENTS

CLIN 0002 KIT CONTENTS 1THWK-KIT02

Part Number Nomenclature NEW CLIN QTY

7111116 POWER INDICATOR ASSEMBLY 0019 1

7111117 CABLE, POWER 0020 1

7111126 CABLE, ETHERNET SHIELDED TWISTED PAIR (W5) 0021 1

7111129 COVER 0022 1

7111122-1 ADAPTER, BASE 0023 2

8714768-01 CABLE, POWER, PRINTER 0024 1

ITEM(S) 0003 - CLIN 0003 KIT CONTENTS

CLIN 0003 KIT CONTENTS 1THWK-KIT03

Part Number Nomenclature CLIN QTY

8749402-01 CABLE ASSEMBLY, INPUT POWER 0038 1

8749403-01 CABLE ASSEMBLY, UPS POWER 0039 1

8749404-01 CABLE ASSEMBLY, AC POWER 0040 1

8749404-02 CABLE ASSEMBLY, AC POWER 0041 1

8749404-03 CABLE ASSEMBLY, AC POWER 0042 1

8749404-04 CABLE ASSEMBLY, AC POWER 0043 1

8749404-05 CABLE ASSEMBLY, AC POWER 0044 1

8749404-06 CABLE ASSEMBLY, AC POWER 0045 1

8749404-07 CABLE ASSEMBLY, AC POWER 0046 1

8749405-01 CABLE ASSEMBLY, DC POWER 0047 1

8749406-01 CABLE ASSEMBLY, GROUND 0050 9

8749406-02 CABLE ASSEMBLY, GROUND 0051 1

8749407-01 CABLE ASSEMBLY, ETHERNET 0055 1

8749407-02 CABLE ASSEMBLY, ETHERNET 0056 1

8749407-03 CABLE ASSEMBLY, ETHERNET 0057 1

8749407-04 CABLE ASSEMBLY, ETHERNET 0058 1

8749407-05 CABLE ASSEMBLY, ETHERNET 0059 1

8749407-06 CABLE ASSEMBLY, ETHERNET 0060 1

8749407-07 CABLE ASSEMBLY, ETHERNET 0061 1

8749407-08 CABLE ASSEMBLY, ETHERNET 0062 1

8749407-09 CABLE ASSEMBLY, ETHERNET 0063 1

8749407-10 CABLE ASSEMBLY, ETHERNET 0064 1

8749407-11 CABLE ASSEMBLY, ETHERNET 0065 1

8749407-12 CABLE ASSEMBLY, ETHERNET 0066 1

8749407-14 CABLE ASSEMBLY, ETHERNET 0068 1

8749407-15 CABLE ASSEMBLY, ETHERNET 0069 1

8749408-01 CABLE ASSEMBLY, USB 0074 1

8749408-02 CABLE ASSEMBLY, USB 0075 1

8749408-03 CABLE ASSEMBLY, USB 0076 1

8749408-04 CABLE ASSEMBLY, USB 0077 1

8749409-01 CABLE ASSEMBLY, VGA 0079 1

8749409-02 CABLE ASSEMBLY, VGA 0080 1

8749409-03 CABLE ASSEMBLY, VGA 0081 1

8749409-04 CABLE ASSEMBLY, VGA 0082 1

8749410-01 CABLE ASSEMBLY, RS232 0083 1

8749411-01 CABLE ASSEMBLY, RS422/MIL188 SERIAL DATA 0084 1

8749412-01 CABLE ASSEMBLY, TCIP SERIAL DATA 0085 1

8749413-01 CABLE ASSEMBLY, ST-ST DUPLEX MM FIBER 0086 1

8749414-01 CABLE ASSEMBLY, NTDS E 0087 1

8749414-02 CABLE ASSEMBLY, NTDS E 0088 1

8749415-01 CABLE ASSEMBLY, NTDS A 0089 1

8749417-01 CABLE ASSEMBLY, EKMS 0091 1

8749475-01 CABLE ASSEMBLY, SENSOR POWER 0101 1

8749407-18 CABLE ASSEMBLY, ETHERNET 0072 1

ITEM(S) 0004 - CLIN 0004 KIT CONTENTS

CLIN 0004 KIT CONTENTS 1THWK-KIT04

Part Number Nomenclature CLIN QTY

8749402-01 CABLE ASSEMBLY, INPUT POWER 0038 1

8749403-01 CABLE ASSEMBLY, UPS POWER 0039 1

8749404-01 CABLE ASSEMBLY, AC POWER 0040 1

8749404-02 CABLE ASSEMBLY, AC POWER 0041 1

8749404-03 CABLE ASSEMBLY, AC POWER 0042 1

8749404-04 CABLE ASSEMBLY, AC POWER 0043 1

8749404-05 CABLE ASSEMBLY, AC POWER 0044 1

8749404-06 CABLE ASSEMBLY, AC POWER 0045 1

8749404-07 CABLE ASSEMBLY, AC POWER 0046 1

8749406-01 CABLE ASSEMBLY, GROUND 0050 9

8749406-02 CABLE ASSEMBLY, GROUND 0051 1

8749407-01 CABLE ASSEMBLY, ETHERNET 0055 1

8749407-02 CABLE ASSEMBLY, ETHERNET 0056 1

8749407-03 CABLE ASSEMBLY, ETHERNET 0057 1

8749407-04 CABLE ASSEMBLY, ETHERNET 0058 1

8749407-05 CABLE ASSEMBLY, ETHERNET 0059 1

8749407-06 CABLE ASSEMBLY, ETHERNET 0060 1

8749407-07 CABLE ASSEMBLY, ETHERNET 0061 1

8749407-08 CABLE ASSEMBLY, ETHERNET 0062 1

8749407-09 CABLE ASSEMBLY, ETHERNET 0063 1

8749407-10 CABLE ASSEMBLY, ETHERNET 0064 1

8749407-11 CABLE ASSEMBLY, ETHERNET 0065 1

8749407-12 CABLE ASSEMBLY, ETHERNET 0066 1

8749407-15 CABLE ASSEMBLY, ETHERNET 0069 1

8749408-01 CABLE ASSEMBLY, USB 0074 1

8749408-02 CABLE ASSEMBLY, USB 0075 1

8749408-03 CABLE ASSEMBLY, USB 0076 1

8749408-04 CABLE ASSEMBLY, USB 0077 1

8749409-01 CABLE ASSEMBLY, VGA 0079 1

8749409-02 CABLE ASSEMBLY, VGA 0080 1

8749409-03 CABLE ASSEMBLY, VGA 0081 1

8749409-04 CABLE ASSEMBLY, VGA 0082 1

8749410-01 CABLE ASSEMBLY, RS232 0083 1

8749417-01 CABLE ASSEMBLY, EKMS 0091 1

8749475-01 CABLE ASSEMBLY, POWER SENSOR 0101 1

8749364-01 CABLE ASSEMBLY, SERIAL DATA (W406) 0036 1

8749365-01 CABLE ASSEMBLY, LC-ST DUPLEX MM FIBER (W501) 0037 1

8749407-19 CABLE ASSEMBLY, ETHERNET (W240) 0073 1

ITEM(S) 0005 - CLIN 0005 KIT CONTENTS

CLIN 0005 KIT CONTENTS 1THWK-KIT05

Part Number Nomenclature CLIN QTY

8749402-01 CABLE ASSEMBLY, INPUT POWER 0038 1

8749403-01 CABLE ASSEMBLY, UPS POWER 0039 1

8749404-01 CABLE ASSEMBLY, AC POWER 0040 1

8749404-02 CABLE ASSEMBLY, AC POWER 0041 1

8749404-03 CABLE ASSEMBLY, AC POWER 0042 1

8749404-04 CABLE ASSEMBLY, AC POWER 0043 1

8749404-05 CABLE ASSEMBLY, AC POWER 0044 1

8749404-06 CABLE ASSEMBLY, AC POWER 0045 1

8749404-07 CABLE ASSEMBLY, AC POWER 0046 1

8749405-01 CABLE ASSEMBLY, DC POWER 0047 1

8749406-01 CABLE ASSEMBLY, GROUND 0050 9

8749406-02 CABLE ASSEMBLY, GROUND 0051 1

8749407-01 CABLE ASSEMBLY, ETHERNET 0055 1

8749407-02 CABLE ASSEMBLY, ETHERNET 0056 1

8749407-03 CABLE ASSEMBLY, ETHERNET 0057 1

8749407-04 CABLE ASSEMBLY, ETHERNET 0058 1

8749407-05 CABLE ASSEMBLY, ETHERNET 0059 1

8749407-06 CABLE ASSEMBLY, ETHERNET 0060 1

8749407-07 CABLE ASSEMBLY, ETHERNET 0061 1

8749407-08 CABLE ASSEMBLY, ETHERNET 0062 1

8749407-09 CABLE ASSEMBLY, ETHERNET 0063 1

8749407-10 CABLE ASSEMBLY, ETHERNET 0064 1

8749407-11 CABLE ASSEMBLY, ETHERNET 0065 1

8749407-12 CABLE ASSEMBLY, ETHERNET 0066 1

8749407-14 CABLE ASSEMBLY, ETHERNET 0068 1

8749407-15 CABLE ASSEMBLY, ETHERNET 0069 1

8749408-01 CABLE ASSEMBLY, USB 0074 1

8749408-02 CABLE ASSEMBLY, USB 0075 1

8749408-03 CABLE ASSEMBLY, USB 0076 1

8749408-04 CABLE ASSEMBLY, USB 0077 1

8749409-01 CABLE ASSEMBLY, VGA 0079 1

8749409-02 CABLE ASSEMBLY, VGA 0080 1

8749409-03 CABLE ASSEMBLY, VGA 0081 1

8749409-04 CABLE ASSEMBLY, VGA 0082 1

8749410-01 CABLE ASSEMBLY, RS232 0083 1

8749411-01 CABLE ASSEMBLY, RS422/MIL188 SERIAL DATA 0084 1

8749412-01 CABLE ASSEMBLY, TCIP SERIAL DATA 0085 1

8749413-01 CABLE ASSEMBLY, ST-ST DUPLEX MM FIBER 0086 1

8749414-01 CABLE ASSEMBLY, NTDS E 0087 1

8749414-02 CABLE ASSEMBLY, NTDS E 0088 1

8749415-01 CABLE ASSEMBLY, NTDS A 0089 1

8749417-01 CABLE ASSEMBLY, EKMS 0091 1

8749475-01 CABLE ASSEMBLY, SENSOR POWER 0101 1

8749407-19 CABLE ASSEMBLY, ETHERNET (W240) 0073 1

ITEM(S) 0006 - CLIN 0006 KIT CONTENTS

CLIN 0006 KIT CONTENTS 1THWK-KIT06

Part Number Nomenclature CLIN QTY

8749484-01 PLATE, AIR BLOCK, REAR 0103 1

8749485-01 PLATE, AIR BLOCK, FRONT 0104 1

8749491-01 PANEL I/O 0113 1

8749492-01 PLATE, J24 0114 1

8749492-02 PLATE, J25 0115 1

8749492-03 PLATE, BLANK 0116 4

8749492-04 PLATE, J26 0117 1

8749492-05 PLATE, J27 0118 1

8749492-06 PLATE, J28 0119 1

8749492-07 PLATE, J29 0120 1

8749492-08 PLATE, J39 0121 1

8749492-09 PLATE, J36 0122 1

8749492-10 PLATE, J37 0123 1

8749492-11 PLATE, J38 0124 1

8749492-12 PLATE, BLANK 0125 7

8749492-13 PLATE, J1 0126 1

8749492-14 PLATE, J21 0127 1

8749492-15 PLATE, J40 0128 1

8749492-16 PLATE, J41 0129 1

8749492-17 PLATE, J43 0130 1

8749494-01 PANEL, 1U 0131 3

8749495-01 PANEL, 2U 0132 2

8749496-01 PANEL, 3U 0134 2

8749497-01 PANEL, 7U 0135 1

8749498-01 PLATE, ID, TEC 0136 2

8749498-02 PLATE, ID, TEC 0137 2

8749549-01 ASSY, FAN PANEL 0158 1

8749550-01 FRAME, I/O 0159 1

8749551-01 PLATE, COVER, I/O 0160 1

8749552-01 PLATE, CONNECTOR, FIBER 0161 1

8749552-02 PLATE, CONNECTOR, BLANK 0162 3

8749553-01 BRACKET, FIBER OPTIC, 0163 1

ITEM(S) 0007 - CLIN 0007 KIT CONTENTS

CLIN 0007 KIT CONTENTS 1THWK-KIT07

Part Number Nomenclature CLIN QTY

8749491-01 PANEL I/O 0113 1

8749492-01 PLATE, J24 0114 1

8749492-02 PLATE, J25 0115 1

8749492-03 PLATE, BLANK 0116 7

8749492-04 PLATE, J26 0117 1

8749492-05 PLATE, J27 0118 1

8749492-06 PLATE, J28 0119 1

8749492-07 PLATE, J29 0120 1

8749492-09 PLATE, J36 0122 1

8749492-10 PLATE, J37 0123 1

8749492-11 PLATE, J38 0124 1

8749492-12 PLATE, BLANK 0125 11

8749492-13 PLATE, J1 0126 1

8749494-01 PANEL, 1U 0131 3

8749495-01 PANEL, 2U 0132 1

8749496-01 PANEL, 3U 0134 2

8749497-01 PANEL, 7U 0135 1

8749498-01 PLATE, ID, TEC 0136 2

8749498-02 PLATE, ID, TEC 0137 2

8749549-01 ASSY, FAN PANEL 0158 1

8749550-01 FRAME, I/O 0159 1

8749551-01 PLATE, COVER, I/O 0160 1

8749552-01 PLATE, CONNECTOR, FIBER 0161 1

8749552-02 PLATE, CONNECTOR, BLANK 0162 3

8749553-01 BRACKET, FIBER OPTIC, 0163 1

8749495-02 PANEL, 2U (MRC PANEL) 0133 1

ITEM(S) 0008 - CLIN 0008 KIT CONTENTS

CLIN 0008 KIT CONTENTS 1THWK-KIT08

Part Number Nomenclature CLIN QTY

1THWK-KIT01 KIT # 01 - BRACKETS SLIDES SWING ARMS (V)6 0001 2

1THWK-KIT02 KIT # 02 - TWP Parts 0002 2

1THWK-KIT06 KIT # 06 - FAN I/O AND PANELS 0006 2

1THWK-KIT14 KIT # 14 - ATDC COMMON PARTS 0014 2

1THWK-KIT18 KIT # 18 - ATDC FRAME KIT (NO COMMS) 0018 2

8749420-01 POWER CONTROL PANEL ASSY 0092 2

8749440-05 ROUTER CHASSIS (V)6 0094 2

8749460-02 AUXILIARY ASSY (V)6 0097 2

8749559-01 ASSEMBLY, ATX RACK MOUNTED PROCESSOR RT (USN/FMS) 0138 2

8749645-01 ELECTRONIC ENCLOSURE ASSEMBLY (w/THIN CLIENT) 0204 2

8501800-02 FIBER OPTIC CONVERTER BOX 0025 1

1THWK-KIT05 KIT # 05 - CABLES (FMS) 0005 2

8749559-05 ASSEMBLY, ATX RACK MOUNTED PROCESSOR TTWCS (FMS) 2272 0144 2

8749559-07 ASSEMBLY, ATX RACK MOUNTED PROCESSOR TMPC (FMS) 2273 0145 2

ITEM(S) 0009 - CLIN 0009 KIT CONTENTS

CLIN 0009 KIT CONTENTS 1THWK-KIT09

Part Number Nomenclature CLIN QTY

1THWK-KIT01 KIT # 01 - BRACKETS SLIDES SWING ARMS (V)6 0001 2

1THWK-KIT02 KIT # 02 - TWP Parts 0002 2

1THWK-KIT06 KIT # 06 - FAN I/O AND PANELS 0006 2

1THWK-KIT14 KIT # 14 - ATDC COMMON PARTS 0014 4

1THWK-KIT18 KIT # 18 - ATDC FRAME KIT (NO COMMS) 0018 4

8749420-01 POWER CONTROL PANEL ASSY 0092 2

8749440-05 ROUTER CHASSIS (V)6 0094 2

8749460-02 AUXILIARY ASSY (V)6 0097 2

8749559-01 ASSEMBLY, ATX RACK MOUNTED PROCESSOR RT (USN/FMS) 0138 2

8749645-01 ELECTRONIC ENCLOSURE ASSEMBLY (w/THIN CLIENT) 0204 4

8501800-02 FIBER OPTIC CONVERTER BOX 0025 1

1THWK-KIT05 KIT # 05 - CABLES (FMS) 0005 2

8749559-05 ASSEMBLY, ATX RACK MOUNTED PROCESSOR TTWCS (FMS) 0144 2

8749559-07 ASSEMBLY, ATX RACK MOUNTED PROCESSOR TMPC (FMS) 0145 2

ITEM(S) 0010 - CLIN 0010 KIT CONTENTS

CLIN 0010 KIT CONTENTS 1THWK-KIT10

Part Number Nomenclature CLIN QTY

1THWK-KIT14 KIT # 14 - ATDC COMMON PARTS 0014 1

8749420-01 POWER CONTROL PANEL ASSY 0092 1

8749460-02 AUXILIARY ASSY (V)6 0097 1

8749559-01 ASSEMBLY, ATX RACK MOUNTED PROCESSOR RT (RMP_USN) 0138 1

8749612-01 CABLE ASSY, DC MONITOR POWER 0178 1

8749612-02 CABLE ASSY, DC MONITOR POWER 0179 1

8749645-01 ELECTRONIC ENCLOSURE ASSEMBLY (w/THIN CLIENT) 0204 1

8749700-01 THIN CLIENT ASSEMBLY/KIT 0216 1

8749559-05 ASSEMBLY, ATX RACK MOUNTED PROCESSOR TTWCS (RMP_FMS) 0144 1

8749559-07 ASSEMBLY, ATX RACK MOUNTED PROCESSOR TMPC (RMP_FMS) 0145 1

1THWK-KIT05 KIT # 05 - CABLES (FMS) 0005 1

ITEM(S) 0011 - CLIN 0011 KIT CONTENTS

CLIN 0011 KIT CONTENTS 1THWK-KIT11

Part Number Nomenclature CLIN QTY 8749522-06 MOTHERBOARD A SUBASSEMBLY (1xCPU) 0148 1

8749524-01 DOOR, OPTICAL DRIVE, BLANK 0149 1

8749525-01 DOOR, HARD DRIVE, BLANK 0150 4

8749558-01 ASSEMBLY, CHASSIS, ATX RACK MOUNTED PROCESSOR 0153 1

8749548-05 SATA CABLE 0157 1

8749557-01 CABLE ASSY, SLIMELINE SAS- SATA 0225 1

ITEM(S) 0012 - CLIN 0012 KIT CONTENTS

CLIN 0012 KIT CONTENTS 1THWK-KIT12

Part Number Nomenclature CLIN QTY 8749522-05 MOTHERBOARD A SUBASSEMBLY (2xCPU) 0147 1

8749525-01 DOOR, HARD DRIVE, BLANK 0150 3

8749558-01 ASSEMBLY, CHASSIS, ATX RACK MOUNTED PROCESSOR 0153 1

8749538-01 HARD DRIVE TRAY ASSEMBLY 0154 1

8749539-01 OPTICAL DRIVE TRAY ASSEMBLY 0155 1

ITEM(S) 0013 - CLIN 0013 KIT CONTENTS

CLIN 0013 KIT CONTENTS 1THWK-KIT13

Part Number Nomenclature CLIN QTY 8749522-05 MOTHERBOARD A SUBASSEMBLY (2xCPU) 0147 1

8749525-01 DOOR, HARD DRIVE, BLANK 0150 2

8749558-01 ASSEMBLY, CHASSIS, ATX RACK MOUNTED PROCESSOR 0153 1

8749538-01 HARD DRIVE TRAY ASSEMBLY 0154 2

8749539-01 OPTICAL DRIVE TRAY ASSEMBLY 0155 1

ITEM(S) 0014 - CLIN 0014 KIT CONTENTS

CLIN 0014 KIT CONTENTS 1THWK-KIT14

Part Number Nomenclature CLIN QTY

8749407-17 CABLE ASSY, ETHERNET 0071 1

8749408-06 CABLE ASSY, USB 0078 1

8749602-01 CABLE ASSY, ATDC INPUT POWER 0167 1

8749603-01 CABLE ASSY, ATDC SWITCHED POWER 0168 1

8749604-01 CABLE ASSY, FILTERED POWER 0169 1

8749614-01 CABLE ASSY, LAMP AND RESET 0182 1

8749615-01 CABLE ASSY, TIME METER 0183 1

8749619-01 CABLE ASSY, GROUND, 20AWG 0184 1

8749624-01 CABLE ASSY, MONITOR DVI 0188 1

8749624-02 CABLE ASSY, MONITOR DVI 0189 1

8749406-03 CABLE ASSY, GROUND 0052 1

8749406-04 CABLE ASSY, GROUND 0053 1

8749406-05 CABLE ASSY, GROUND 0054 1

ITEM(S) 0015 - CLIN 0015 KIT CONTENTS

CLIN 0015 KIT CONTENTS 1THWK-KIT15

Part Number Nomenclature CLIN QTY

8749612-01 CABLE ASSY, DC MONITOR POWER 0178 1

8749612-02 CABLE ASSY, DC MONITOR POWER 0179 1

8749629-01 CABLE ASSY, FOOTSWITCH 0191 1

8749630-01 CABLE ASSY, CMT HEADSET 0192 1

8749631-01 CABLE ASSY, CMT SVS CKTS 0193 1

8749632-01 CABLE ASSY, CMT SP CKTS 0194 1

8749650-01 FRAME ASSEMBLY 0198 1

8749693-02 PLATE, MOUNTING, COMMS 0207 1

8749694-01 FRONT, INTERFACE, COMMS 0210 1

8749695-01 LEFT SIDE, INTERFACE, COMMS 0211 1

8749696-01 RIGHT SIDE, INTERFACE, COMMS 0212 1

8749697-01 REAR, INTERFACE, COMMS 0213 1

ITEM(S) 0016 - CLIN 0016 KIT CONTENTS

CLIN 0016 KIT CONTENTS 1THWK-KIT16

Part Number Nomenclature CLIN QTY

8749612-01 CABLE ASSY, DC MONITOR POWER 0178 1

8749612-02 CABLE ASSY, DC MONITOR POWER 0179 1

8749637-01 CABLE ASSY, SOUND PWR PHONE 0223 1

8749650-03 FRAME ASSEMBLY 0199 1

8749639-01 CABLE ASSY, REI COMMS HEADSET 0227 1

8749406-06 CABLE ASSY, GROUND 0230 1

8749638-01 CABLE ASSY, FOOTSWITCH ADAPTER 0229 1

8749693-04 PLATE, MOUNTING, COMMS 0209 1

8749636-01 REI KIT, MECHANICAL 0222 1

8749699-01 COVER, I/O PANEL 0215 1

8749638-01 CABLE ASSY, FOOTSWITCH ADAPTER 0229 1

ITEM(S) 0017 - CLIN 0017 KIT CONTENTS

CLIN 0017 KIT CONTENTS 1THWK-KIT17

Part Number Nomenclature CLIN QTY

8749612-01 CABLE ASSY, DC MONITOR POWER 0178 1

8749612-02 CABLE ASSY, DC MONITOR POWER 0179 1

8749629-01 CABLE ASSY, FOOTSWITCH 0191 1

8749633-01 CABLE ASSY, LS-653 HEADSET 0195 1

8749634-01 CABLE ASSY, LS-653 SVS CKTS 0196 1

8749635-01 CABLE ASSY, LS-653 SP CKTS 0197 1

8749650-01 FRAME ASSEMBLY 0198 1

8749693-03 PLATE, MOUNTING, COMMS 0208 1

8749694-01 FRONT, INTERFACE, COMMS 0210 1

8749695-01 LEFT SIDE, INTERFACE, COMMS 0211 1

8749696-01 RIGHT SIDE, INTERFACE, COMMS 0212 1

8749697-01 REAR, INTERFACE, COMMS 0213 1

ITEM(S) 0018 - CLIN 0018 KIT CONTENTS

CLIN 0018 KIT CONTENTS 1THWK-KIT18

Part Number Nomenclature CLIN QTY

8749612-01 CABLE ASSY, DC MONITOR POWER 0178 1

8749612-02 CABLE ASSY, DC MONITOR POWER 0179 1

8749650-01 FRAME ASSEMBLY 0198 1

8749693-01 PLATE, MOUNTING, COMMS 0206 1

8749698-01 PLATE, BLANK, COMMS 0214 1

8749699-01 COVER, I/O PANEL 0215 2

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 100

KIT # 01 - BRACKETS SLIDES SWING ARMS

FFP

KIT # 01 - BRACKETS SLIDES SWING ARMS (V)6

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT01

PSC CD: 5342

NET AMT

STEPLADDER PRICING

STEPLADDER NAME ITEM NO FROM QUANTITY TO QUANTITY UNIT PRICE

KIT # 01 - BRACKETS

SLIDES SWING ARMS (V)6

0001 1.00 5.00

6.00 15.00

16.00 100.00

0002 65 KIT # 02 - TWP Parts

FFP

FOB: Destination

MFR PART NR: 1THWK-KIT02

KIT # 02 - TWP Parts 0002 1.00 5.00

16.00 65.00

0003 80

KIT # 03 - CABLES (USN)

FFP

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT03

KIT # 03 - CABLES (USN) 0003 1.00 5.00

16.00 80.00

0004 45

KIT # 04 - CABLES (GL)

FFP

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT04

KIT # 04 - CABLES (GL) 0004 1.00 5.00

16.00 45.00

0005 10

KIT # 05 - CABLES (FMS)

FFP

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT05

KIT # 05 - CABLES (FMS) 0005 1.00 10.00

0006 80

KIT # 06 - FAN I/O AND PANELS

FFP

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT06

KIT # 06 - FAN I/O AND

PANELS

0006 1.00 5.00

16.00 80.00

0007 25

KIT # 07 - FAN I/O AND PANELS (GL)

FFP

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT07

KIT # 07 - FAN I/O AND

PANELS (GL)

0007 1.00 5.00

16.00 25.00

0008 8

KIT # 08 - FMS01

FFP

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT08

KIT # 08 - FMS01 0008 1.00 5.00

6.00 8.00

0009 20

KIT # 09 - FMS02

FFP

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT09

KIT # 09 - FMS02 0009 1.00 5.00

16.00 20.00

0010 28 KIT # 10 - FMSSpares

FFP

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT10

KIT # 10 - FMSSpares 0010 1.00 5.00

16.00 28.00

0011 100

KIT # 11 - RMP (RT)

FFP

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT11

KIT # 11 - RMP (RT) 0011 1.00 20.00

21.00 50.00

51.00 100.00

0012 100

KIT # 12 - RMP (TTWCS)

FFP

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 1THWK-KIT12

KIT # 12 - RMP (TTWCS) 0012 1.00 20.00

0013 100

KIT # 13 - RMP…