N6339422R0013_Conformed Copy_Amendment 3.pdf

CODE

(Hour)

PAGE(S)

until 04:00 PM local time 24 May 2022

X

A

X B

X C X D

EX

X

G

F 118 - 127

128 - 140

X H 141

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA

FAR (48 CFR) 53.214(c)

DX-A3 1 146

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N63394 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 0 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and

N/A conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

1 - 4

5 - 49

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

50 - 76

77 - 80

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

81 - 86

87 - 94 X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 95 - 103 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 104 - 105 X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIO NS AND INSTRUCTIO NS

PART III - LIST O F DO CUMENTS, EXHIBITS AND O THER ATTACHMENTS

106 - 116

PART II - CO NTRACT CLAUSES

NAVAL SURFACE WARFARE CENTER

4363 MISSILE WAY

PORT HUENEME CA 93043-4307

(805) 228-8287

805-228-6299FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.5. DATE ISSUED

02 Mar 2022

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N6339422R0013

Section SF 30 - BLOCK 14 CONTINUATION PAGE

SOLICITATION AMENDMENT 0001

The purpose of Solicitation Amendment 0001 is to answer questions from industry as well as:

1) Delete clause E-246-H016

2) Adjust Inspection and Acceptance Terms in Section E.

3) Adjust various part numbers in the Statement of Work.

VENDOR QUESTIONS and ANSWERS:

Question:The supplied PL is combined with MCP and Status Panel components. How do you separate the part lists between MK448 MCP and MK430 Status Panel?

Answer: Vendors can separate the part lists from following the drawings for MCP part number 7103707-39 and

Status Panel part number 6135857-9.

Question: These documents are missing from the TDP: 7103707-39 & 6135857-9

Answer: 7103707 NOR 30 introduced 7103707-39. The TDP for Status Panel will be provided via DoD SAFE as part of the Amendment 1.

Question: Contractor formally asking for an extension to 05/06/2022 on the offer due date for this solicitation.

Answer: The Government concurs with extension to 05/06/2022.

Question: The original disk that received contains the MCP files, but is missing the TDP for the Status Panel

(6135857-9).

Answer: The TDP for Status Panel will be provided via DoD SAFE as part of the Amendment 1.

Question: For MAM, OBRP, INCO, Depot, and LRU kits/BOM’s, vendor requests Government confirm that TDP-approved alternates for the MCP and Status Panel BOMs for those part numbers listed in the kits on pages 48-51 will be acceptable. For example, 5223019-14 is listed in Depot Spares list. The Status Panel TDP/BOM identifies

5223019-22 as acceptable alternate. Will 5223019-22 be accepted?

Answer: The Government needs part number, description and proposed alternate part number to make determination. 5223019-22 can be accepted.

Question: CCA, Plenum Drain Valve/Anti-Icing is listed in the MAM kit. Request Government confirm part number for this item. 7104187-19 does not appear in TDP.

Answer: The Plenum Drain Valve/Anti-Icing CCA part number is 8652170-9.

Question: Request Government confirm part numbers for Microcircuit CPLD and Microcircuit DSP.

Answer: The Government requests vendor to provide the drawing number and part number of CPLD and DSP to confirm.

Question: CLIN’s 3000 through 9000 are clear and the contents are shown in “MCP-SP kits contents” excel spreadsheet.CLIN’s 1000 THROUGH 2000AE. Vendor will need some clarification. What part numbers are included in each MK448 MCP & MK430 Status Panel? Could Government provide a list similar to the one provided for the rest of the CLIN’s?

Answer: MCP part number is 7103707-39 and Status Panel part number is 6135857-9.

Question: Request Government provide Exhibit (A) CDRLs A001 through A007.

Answer: Exhibit A will be provided as an attachment as part of Amendment 1.

SOLICITATION AMENDMENT 0002

VENDOR QUESTIONS AND ANSWERS

Amendment 0002

Question: Request TDP for the Status Panel (6135857-9), and a 30 day extension after receipt of the TDP to allow for sufficient time to review and quote.

Answer: The drawings were provided with Amendment 1 and the RFP has been extended to 5/6/2022.

Question: Is the Government willing to incorporate FAR 52.216-2 Economic Price Adjustment -Standard Supplies

(or FAR 52.216-3/52.216-4) or a similar Agency wide clause that allows for economic price adjustment in accordance with FAR 16.203-4(b)(2) into this solicitation and resultant award? This would help mitigate the extraordinary inflation we are seeing, and allow for more competitive pricing.

Answer: No, the clause will not be added. However, progress payments are available to qualifying contractors.

Question: For PN 7103867-1, could you provide clarification as to the second source? Leach is indicating they do not provide this PN

Answer: For P/N: 7103867-1 listed sources of supply:

• P/N: 351-39193-001, Eaton/MSC Corp (CC: 96182).

o Cage Code 96182 comes up as SaFran Electronics & Defense www.safran-electronics-defense.com

• P/N: FP560, Leach Corp (CC: ?) See below for Leach International Europe.

• P/N: FP560, Leach International Europe (CC: F0219) – Navy contacted this supplier. The part is still available. Leach mentioned “production contractors in the US can contact us at bid.desk@leachcorp.com for a quote.”

Question: Per NOR 031 for PN 5498247, could you confirm that Arnold Magnetics Corp. is still an active source?

Have had difficulty getting a response from this supplier to RFQs.

Answer: For P/N: 5498247-1 listed source of supply:

• P/N: SHX-795, Arnold Magnetics Corp (CC: 04879).

o Cage Code 04879 comes up as Arnold magnetics Corporation www.amcpower.com

• For P/N: 5498247-2 listed source of supply:

• P/N: RM2X-1105, Arnold Magnetics Corp (CC: 04879).

o Cage Code 04879 comes up as Arnold magnetics Corporation www.amcpower.com Question: Requesting DWG 5598018, does not appear to be contained within the TDP.

Answer: The drawings will be provided via DoD SAFE with Amendment 2.

Question: Is there an updated specification control drawing for 5498272? Last revision was 1986, and it appears that some of the originally cited specifications are out of date, with the original vendor Cutler-Hammer no longer existing, having been sold to Eaton and now DRS.

Answer: This drawing is the latest revision. The specs are all still active. Eaton is the vendor (having acquired

Cutler-Hammer in 1978) and should be contacted for part availability.

SOLICITATION AMENDMENT 0003

SOLICITATION AMENDMENT 0003

VENDOR QUESTIONS AND ANSWERS

Question: Request for 2 week extension of the response date to 05/24/2022.

Answer: Yes, concur with the request to extend to 5/24/2022.

Question: Dean Technology (manufacturer of HVCA components) notified that after two weeks of review that the they require an LOA as the following parts are considered proprietary:

USG DWG: 7103951-1 (Dean Tech PN: JH776)

USG DWG: 7103954-1 (Dean Tech PN: JH775)

Answer: Vendors can contract Ms. Pam Brank , an Inside Sales Represtentative at Dean

Technologies via email pbrank@deantech.com for quote.

Question: Missing Drawings Requests:

8591700

7572113

7103973

7104682

7104683

5598018

6388493

7104867

Answer:

8591700 - Not Applicable to -39 MCP

7572113 - Not Applicable to -39 MCP

7103973 - included on DVD H30ENGWO330

7104682 - Not Applicable to -39 MCP

7104683 - Not Applicable to -39 MCP

5598018 - will be sending with Amendment 3

6388493 - Not Applicable to -39 MCP

7104867 - Not Applicable to -39 MCP

Question:

Component Obsolescence:

Vishay component GA200SA60SP (7105348-20) as well as 6388329-35/ GA200SA60S appear to be obsolete, is there an alternative?

PN 5497408 is discontinued and has not been available for several years; could USG provide an alternative?

Answer:

These are known obsolete items. Alternate 7105348-57, Part Number VS-GT250SA60S, Manufacturer VISHAY, has been added to the TDP. Please note attached NOR for

7105348 -57 and REV B of Parts List for 7104048, Motor Drive Assembly. This part is

FN 68 on 7104048.

Please provide a next higher level assembly in which PN 5497408 is used.

Question: Is the Wind River Systems software 7105520-1 to be provided by the contractor and loaded into the MCP, or will it be handled by the USG?

Answer: The contractor is expected to purchase The WinRiver license and load into The MCP.

Question: Versalogic is requiring an LOA prior to issuing a quote for 8591701, could USG provide an LOA?

Answer: Chris Hull at Versalogic can be contacted for quote.

Section B - Supplies or Services and Prices

NOTE A

Stepladder Pricing. Stepladder pricing is utilized in this solicitation to provide Offerors an opportunity to propose different pricing for separate quantity ranges within applicable Contract Line Items (CLINs). Price evaluation of step ladder CLINs will utilize a randomly selected quantity. Notwithstanding the option to propose different unit pricing for different quantities, the Offeror may propose the same unit price for all quantities.

For all option CLINs with stepladder pricing, the Government may unilaterally exercise a given line item more than once. Option CLINs with stepladder pricing may be exercised until the total quantity purchased equals the maximum quantity listed for that option CLIN in Section B.

(End of Text)

NOTE B

The following table provides the approximate timeframes that the CLINs and associated SLINs, where applicable, will be awarded or exercised. This information is provided for planning purposes only and is subject to change depending on need and funding availability.

Deliverable

CLINs and Award/Option Exercise Timeframe

Award/Base

Year* Option Year 1 Option Year 2 Option Year 3 Option Year 4

VLS MK 448 MCP CLIN 1000 CLIN 1100 CLIN 1200 CLIN 1300 CLIN 1400

VLS MK 430 MCP Status Panel CLIN 2000 CLIN 2100 CLIN 2200 CLIN 2300 CLIN 2400

MCP Status Panel MAM Components CLIN 3000 CLIN 3100 CLIN 3200 CLIN 3300 CLIN 3400

MCP and Status Panel OBRP Components CLIN 4000 CLIN 4100 N/A N/A N/A

MCP and Status Panel INCO Spares CLIN 5000 CLIN 5100 N/A N/A N/A

MCP and Status Panel Depot Spares CLIN 6000 CLIN 6100 N/A N/A N/A

MCP and Status Panel LRU Set N/A CLIN 7100 CLIN 7200 CLIN 7300 CLIN 7400

Production Readiness Review CLIN 8000 CLIN 8100 CLIN 8200 CLIN 8300 CLIN 8400

Physical Configuration Audit (PCA) CLIN 9000 N/A N/A N/A N/A

Data Deliverables - CDRLs CLIN 0001

*CLINS 1000, 2000, 3000, 4000, 5000, 6000, 8000 and 9000 will be funded at award.

NOTE C

MAXIMUM QUANTITY MULTIPLE OPTION QUANTITY CLINS

CLINs, SLINs or other provisions in this contract set forth option quantities associated with option exercise periods.

Offerors should use those estimated quantities for planning purposes and in the preparation of its proposals including its price proposal. After award of the contract the Government may need to move quantity between these option CLINs. The contract resulting from this solicitation will have a maximum dollar value or a maximum number of units that may be purchased. The Government, may, through contract modification, move quantities of items labor or estimated costs between the option CLINs as long as the contract maximum is not exceeded.

If pricing varies by option exercise period the pricing applicable is the pricing applicable when the option is exercised. For example, items moved from option year four to option year one will be payable at the rates applicable to option year one.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Data Deliverables

FFP

Prepare, maintain, and deliver data IAW CDRLS A001 through A007 and applicable Data Item Description (DID). Government shall have unlimited rights to all data/tech data IAW DFARS 252.227-7019, unless and assertion is accepted by the Government IAW DFARS 252.227-7019. Data Deliverable are Not Separately

Priced (NSP). The cost for all data/tech generated by the contractor directly or indirectly in its performance of this effort is included in the price paid by the

Government under CLINs 1000 through 8000.

FOB: Destination

NET AMT

MK 448 MCP

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

1000AA 12 Each USN DDG Shipset MCP - BY

FFP

MK 448 MCP - Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

PSC CD: 5999

1000AB 12 Each USN DDG Shipset MCP - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

1000AC 4 Each USN FFG Shipset MCP - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

1000AD 4 Each Australia Shipset MCP - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MK 448 MCP - OY1

FFP

STEPLADDER PRICING

STEPLADDER NAME ITEM NO FROM QUANTITY TO QUANTITY UNIT PRICE

MK 448 MCP (CLIN 1100) 1100 12.00 23.00

24.00 35.00

36.00 48.00

1100AA 48 Each

OPTION MK 448 MCP - OY1

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MK 448 MCP - OY2

FFP

MK 448 MCP (CLIN 1200) 1200 12.00 23.00

1200AA 48 Each

OPTION MK 448 MCP - OY2

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MK 448 MCP - OY3

FFP

MK 448 MCP (CLIN 1300) 1300 12.00 23.00

1300AA 48 Each

OPTION MK 448 MCP - OY3

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MK 448 MCP - OY4

FFP

MK 448 MCP (CLIN 1400) 1400 12.00 29.00

30.00 53.00

54.00 72.00

1400AA 72 Each

OPTION MK 448 MCP - OY4

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 430 Status Panel

FFP

2000AA 2 Each USN DDG Shipset Status Panel - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

2000AB 2 Each USN DDG Shipset Status Panel - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

2000AC 1 Each USN FFG Shipset Status Panel - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

2000AD 1 Each Australia Shipset Status Panel - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

2000AE 1 Each Germany Shipset Status Panel - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MK 430 Status Panel - OY1

FFP

MK 430 Status Panel (CLIN

2100)

2100 2.00 3.00

4.00 8.00

9.00 14.00

2100AA 14 Each OPTION MK 430 Status Panel - OY1

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MK 430 Status Panel- OY2

FFP

2200)

2200 2.00 3.00

4.00 7.00

8.00 11.00

2200AA 11 Each OPTION MK 430 Status Panel- OY2

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MK 430 Status Panel - OY3

FFP

2300)

2300 2.00 3.00

4.00 7.00

8.00 12.00

2300AA 12 Each OPTION MK 430 Status Panel - OY3

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MK 430 Status Panel - OY4

FFP

2400)

2400 2.00 3.00

4.00 10.00

11.00 16.00

2400AA 16 Each OPTION MK 430 Status Panel - OY4

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MCP and Status Panel MAM Component

FFP

3000AA 1 Set DDG Shipset MCP-SP MAM Components - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

3000AB 1 Set USN DDG Shipset MCP-SP MAM Comp. - BY

FFP

USN DDG Shipset 2 MCP-SP MAM Components

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

3000AC 1 Set USN FFG Shipset MCP-SP MAM Comp. - BY

FFP

USN FFG Shipset 3 MCP-SP MAM Components

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements - BY

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

3000AD 1 Set Australia MCP-SP MAM Comp. - BY

FFP

Australia MCP-SP MAM Components

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements - BY

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

3000AE 1 Set Germany Saschen MCP-SP MAM Comp. - BY

FFP

Germany Saschen MCP-SP MAM Components

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements - BY

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel MAM Components- OY1

FFP

MCP and Status Panel MAM

Components (CLIN 3100)

3100 1.00 3.00

4.00 6.00

7.00 10.00

3100AA 10 Set OPTION MCP and Status Panel MAM Components- OY1

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel MAM Component - OY2

FFP

Components (CLIN 3200)

3200 1.00 2.00

3.00 4.00

5.00 6.00

3200AA 6 Set OPTION MCP and Status Panel MAM Component - OY2

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel MAM Components- OY3

FFP

Components (CLIN 3300)

3300 1.00 2.00

3300AA 6 Set OPTION MCP and Status Panel MAM Components- OY3

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel MAM Component - OY4

FFP

Components (CLIN 3400)

3400 1.00 3.00

4.00 6.00

7.00 8.00

3400AA 8 Set OPTION MCP and Status Panel MAM Component - OY4

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MCP and SP OBRP Components

FFP

4000AA 1 Set Australia Shipset MCP-SP OBRP Comp.-BY

FFP

Australia Shipset 1 MCP-SP OBRP Components

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

4000AB 1 Set Australia Shipset MCP-SP OBRP Comp.-BY

FFP

Australia Shipset 2 MCP-SP OBRP Components

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

4000AC 5 Set Spain MCP-SP OBRP Comp. - BY

FFP

Spain MCP-SP OBRP Components

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

4000AD 3 Set Korea KDX III MCP-SP OBRP Comp. - BY

FFP

Korea KDX III MCP-SP OBRP Components

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

4000AE 4 Set Finland SQ2020 MCP-SP OBRP Comp. - BY

FFP

Finland SQ2020 MCP-SP INCO Spares

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

4000AF 1 Set Germany Saschen MCP-SP OBRP Comp. - BY

FFP

Germany Saschen MCP-SP INCO Spares

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel OBRP Component- OY1

FFP

MCP and Status Panel OBRP

Components (CLIN 4100)

4100 1.00 2.00

4100AA 6 Set OPTION MCP and Status Panel OBRP Component- OY1

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MCP and SP INCO Spares

FFP

5000AA 1 Set USN FFG MCP-SP INCO Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

5000AB 1 Set Australia MCP-SP INCO Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

5000AC 1 Set Spain MCP-SP INCO Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

5000AD 1 Set Korea KDX III MCP-SP INCO Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

5000AE 1 Set Finland SQ2020 MCP-SP INCO Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

5000AF 1 Set Germany Saschen MCP-SP INCO Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel INCO Spares - OY1

FFP

5100AA 1 Set OPTION MCP and Status Panel INCO Spares - OY1

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MCP and SP Depot Spares

FFP

6000AA 1 Set Australia MCP-SP Depot Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

6000AB 1 Set Spain MCP-SP Depot Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

6000AC 1 Set Korea KDX III MCP-SP Depot Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

6000AD 1 Set Finland SQ2020 MCP-SP Depot Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

6000AE 1 Set Germany Saschen MCP-SP Depot Spares - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel Depot Spares - OY1

FFP

6100AA 1 Set OPTION MCP and Status Panel Depot Spares - OY1

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel LRU Set - OY1

FFP

MCP and Status Panel LRU

Set (CLIN 7100)

7100 1.00 2.00

7100AA 6 Set OPTION MCP and Status Panel LRU Set - OY1

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel LRU Set - OY2

FFP

Set (CLIN 7200)

7200 1.00 2.00

7200AA 6 Set OPTION MCP and Status Panel LRU Set - OY2

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel LRU Set- OY3

FFP

Set (CLIN 7300)

7300 1.00 2.00

7300AA 6 Set OPTION MCP and Status Panel LRU Set- OY3

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

OPTION MCP and Status Panel LRU Set- OY4

FFP

Set (CLIN 7400)

7400 1.00 2.00

7400AA 6 Set OPTION MCP and Status Panel LRU Set- OY4

FFP

Holding SLIN with maximum step ladder quantities. Quantity to be determined at each option exercise. Refer to Note C. Production Phase: Fabricate, assemble and deliver MCP and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

8000 4 Quarter

(Time)

PRODUCTION READINESS REVIEW - BY

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

8100 4 Quarter

OPTION PRODUCTION READINESS REVIEW

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

8200 4 Quarter

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

8300 4 Quarter

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

8400 4 Quarter

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

9000 1 Each

OPTION PPS PHYSICAL CONFIGURATION AUDIT

FFP

Production Phase: Fabricate, assemble and deliver MCP and associated equipment

IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

CLAUSES INCORPORATED BY FULL TEXT

B-215-H002 REFUNDS (SPARES AND SUPPORT EQUIPMENT) (NAVSEA) (OCT 2018)

(a) In the event that the price of a spare part or item of support equipment delivered under this contract significantly exceeds its intrinsic value, the Contractor agrees to refund the difference. Refunds will not be made to recoup the amount of cost decreases that occur over time due to productivity gains (excluding economic purchase quantity considerations) or changes in market conditions.

(b) For purposes of this requirement, the intrinsic value of an item is defined as follows:

(1) If the item is one which is sold or is substantially similar or functionally equivalent to one that is sold in substantial quantities to the general public, intrinsic value is the established catalog or market price, plus the value of any unique requirements, including delivery terms, inspection, packaging, or labeling.

(2) If there is no comparable item sold in substantial quantities to the general public, intrinsic value is defined as the price an individual would expect to pay for the item based upon an economic purchase quantity as defined in FAR

52.207-4, plus the value of any unique requirements, including delivery terms, inspection, packaging or labeling.

(c) At any time up to two years after delivery of a spare part or item of support equipment, the Contracting Officer may notify the Contractor that based on all information available at the time of the notice, the price of the part or item apparently exceeds its intrinsic value.

(d) If notified in accordance with paragraph (c) above, the Contractor agrees to enter into good faith negotiations with the Government to determine if, and in what amount, the Government is entitled to a refund.

(e) If agreement pursuant to paragraph (d) above cannot be reached, and the Navy's return of the new or unused item to the Contractor is practical, the Navy, subject to the Contractor's agreement, may elect to return the item to the Contractor.

Upon return of the item to its original point of Government acceptance, the Contractor shall refund in full the price paid.

If no agreement pursuant to paragraph (d) above is reached, and return of the item by the Navy is impractical, the

Contracting Officer may, with the approval of the Head of the Contracting Activity, issue a Contracting Officer's final decision on the matter, subject to Contractor appeal as provided in the "Disputes" clause (FAR 52.233-1).

(f) The Contractor shall make refunds, as required under this requirement, in accordance with instructions from the

Contracting Officer.

(g) The Contractor shall not be liable for a refund if the Contractor advised the Contracting Officer in a timely manner that the price it would propose for a spare part or item of support equipment exceeded its intrinsic value, and with such advice, specified the estimated proposed price, the estimated intrinsic value and known alternative sources or item, if any, that can meet the requirement.

(h) This requirement does not apply to any spare parts or items of support equipment whose price is determined through adequate price competition. This requirement also does not apply to any spare part or item of support equipment if the

Contractor submitted, and certified the currency, accuracy and completeness of, cost or pricing data applicable to the item.

(End of text)

Section C - Descriptions and Specifications

STATEMENT OF WORK

VERTICAL LAUNCHING SYSTEM

MOTOR CONTROL PANEL

1.0 SCOPE

The Contractor shall be responsible for the satisfactory and timely performance of all tasks defined in the Statement of Work (SOW). This SOW, with its supporting attachments and referenced documentation, describes the total requirement for the manufacture, assembly, test and delivery of Vertical Launching System (VLS) Motor Control

Panel (MCP), Status Panel, associated Maintenance Assistance Module (MAM) kit, Onboard Repair Part (OBRP) kit, Installation and Checkout (INCO) spares kit, Depot spares kit, and Lowest Replaceable Unit (LRU) kit.

2.0 PROGRAM AUTHORITY

Naval Surface Warfare Center, Port Hueneme Division (NSWC PHD) is the program authority for this contract.

3.0 APPLICABLE DOCUMENTS

The following documents, of the issue indicated, form a part of this SOW, including all applicable terms, conditions, clauses, attachments and exhibits. The exact revisions of the documents are not cited in the text of this SOW. The

Contractor shall apply the latest version of the documents in effect at the time of award of the contract. In the event of a conflict between the documents referenced herein and the contents of this SOW, the SOW shall be considered the superseding requirement.

3.1 Government Documents

The documents listed under para 3.1 will be provided as part of the Technical Data Package (TDP) for this solicitation. The contractor shall apply the latest revision of the documents in effect at the time of award.

Document Number Document Title

MIL-STD-109C Quality Assurance Terms and Definitions

MIL-STD-1686C Electrostatic Discharge Control Program for Protection of

Electrical and Electronic Parts, I Assemblies and Equipment

(Excluding

Electrically Initiated Explosive Devices)

WS 20130 Production Environmental Test Requirements for VLS

TL130-AD-PLN-010-VLS Configuration Management Program Plan for the MK 41 VLS, Volume 1, Equipment (Hardware) Configuration Management

MK 41 VLS Standing Instruction 94-1F, Attachment 6

Marking for technical data

TL130-AD-PLN-030-VLS, Firmware Configuration Management

NAVSEA Drawing 7103707-29 Motor Control Panel (MCP)

NAVSEA Drawing 6135857-9 Status Panel

3.2 Industry Documents

Document Number Document Title

ANSI/ISO/ASQC Q9001 Quality Systems - Model for Quality Assurance in Design, Development, Production, Installation and Servicing

ANSI/EIA-649 2011 National Consensus Standard for Configuration Management

ANSI/ASQC Q9004 Quality System Elements

ISO 9001 Quality Program Requirements

SAE Aerospace Standard

AS9102 Rev A

Aerospace First Article Inspection

ISO 14000 Environmental Management Systems Standards

SAE AS5553 & AS6174 Counterfeit Prevention Plan

4.0 REQUIREMENTS

The Government requires manufacturing of VLS MCP and Status Panel, MAM, OBRP, INCO, Depot and LRU kits in accordance with the documents specified in SOW and the technical data package (TDP). All MCP, Status Panel, and associated components kits shall meet all requirements in accordance with the TDP and associated specifications. See Attachment J-S-1 Pricing Spreadsheet.

The MCP and Status Panel MAM kit contains the following:

Nomenclature Part Number Quantity

Motor Control Panel Control Module (MCM) 8652154-9 1

Power Assy, Motor Control Panel 5598132-19 1

CCA, Motor Command Controller 6388340-19 1

CCA, BITE Monitor 8652167-9 1

CCA, Receiver 7104187-9 1

CCA, Plenum Drain Valve/Anti-Icing 8652170-9 1

Relay Module, Motor Control Panel 7103868-19 1

Anti-Icing Module Assy 7103930-9 1

Lamp Driver Contractor Assy, Motor Control Panel 7103940-9 1

Power Supply Assy, Motor Control Panel 7104008-9 1

Motor Drive Assy, Motor Control Panel 7104048-19 1

Component Assembly, Status Panel 5598023-29 1

Relay Assembly, Four Pole, Status Panel 5598025-19 1

Relay Assembly, Two-Pole, Status Panel 5598026-9 1

Circuit Card Assembly, Sensor Detector No. 1 5599497-9 1

Circuit Card Assembly, Sensor Detector No. 2 5599500-9 1

Circuit Card Assembly, Sensor Detector No. 3 5599503-9 1

Power Supply, Triple Output 5498254-4 1

The MCP and Status Panel OBRP kit contains the following:

Relay Assembly 7103868-19 1

Circuit Card Assembly, Plenum Drain Valve/Anti-Icing 8652170-9 1

Power Supply Assy, Motor Control Panel 7104008-9 1

Surge Suppressor Assy 7104009-9 1

Motor Drive Assy, Motor Control Panel 7104048-19 1

Circuit Breaker 5224167-4 1

The MCP and Status Panel INCO spares kit contains the following:

Switch, Rotary 2 Pole, 3 Position, Momentary (MDM) 5498181-1 1

CCA, BITE Result 5498353-29 1

Power Assembly, Motor Control Panel 5598132-19 1

LED, Sub-Midget (T1) and Midget (T1 3/4) Flange 6387729-4 10

CCA Motor Command Controller 6388340-19 1

CCA, BITE Monitor 8652167-9 1

Relay Module, Motor Control Panel 7103868-19 1

CCA, Plenum Drain Valve/Anti-Icing 8652170-9 1

Anti-Icing Module Assy 7103930-9 1

Lamp Driver Contactor Assy, Motor Control Panel 7103940-9 1

Power Supply Assy, Motor Control Panel 7104008-9 1

Motor Drive Assy, Motor Control Panel 7104048-19 1

CCA, Receiver 7104187-9 1

Lamp, Minature Bayonet Base, T3 1/4 LED 7104853-1 10

Switch, Rotary 7104854-1 1

Motor Control Panel Control Module (MCM) 8652154-9 1

Fuse Holder, 250V 6387041-1 2

Lampholder, Incandescent 5498156-4 2

Lock, Cam 5498184-3 1

Component Assy, Status Panel 5598023-29 1

Relay Assy, Four Pole, Status Panel 5598025-19 1

Relay Assy, Two Pole, Status Panel 5598026-9 1

CCA, Sensor Detector No. 1 5599497-9 2

CCA, Sensor Detector No. 2 5599500-9 2

CCA, Sensor Detector No. 3 5599503-9 2

Indicator Light 5223018-40 2

Indicator Light 5223018-41 2

Indicator Light 5223018-54 2

Indicator Light 5223018-55 2

Indicator Light 5223018-56 3

Indicator Light 5223018-57 3

Switch Light 5223019-12 1

Switch Light 5223019-14 2

The MCP and Status Panel Depot spares kit contains the following:

Switch, Rotary 2 Pole, 3 Position, Momentary…