R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Continuation of Supplies or Services and Prices/Costs

Miscellaneous text in this section has been modified to:

ITEM DESCRIPTION

1. SCOPE

1.1 The purpose of this procurement is andto acquire install Air Compressor. Provide all required labor, tools, materials, and equipment to accomplish this requirement.

1.2 Delivery Location:

USN SRF-JRMC Sasebo Japan

US Naval Base Sasebo Dry Dock #2

Tategami-Cho, Sasebo-City

Nagasaki Pref. Japan 857-0063

Delivery Location POC: Mr. Hiroaki Nishikawa

Command/Ship: SRF JRMC DET Sasebo

TEL: 090-5080-3782

Email: hiroaki.nishikawa.2.ln@us.navy.mil

1.3 Identification:

1.3.1 Item Name: AIR COMPRESSOR

Manufacturer Name: AIRMAN

Production/Model #: SMS75ERD-6E

Quantity: One (1) each

1.3.1.1 Other Information:

a. Air-cooled, built-in dryer, 60Hz spec, discharge pressure 0.7MPa, Air volume 13.9 m3/min, motor-nominal output 7.5kW, voltage 200-220V, Oil fence function (oil spill prevention)

Dimension 2590mm(W)x1250mm(D),1750mm(H), weight 1820kg

b. WARRANTY: Manufacturer's Warranty

c. SECURITY: No security clearance required.

N6264926QE0290001

d. COMPLIANCE and STANDARDS: Items requested must be the SAME or EQUAL based on minimum specifications needed to power equipment in this location.

1.4 The effective period of this order is stated at DELIVERY INFORMATION on SF 1449.

(The Government requested delivery date is After Date of Contract (ADC). Actual delivery date will be specified upon 180 days award.)

Coordinate delivery schedule with the Government Technical Point of Contact (Govt TPOC).

If the contractor realizes any potential or actual delay in delivery, report to the Government Contracting POC via the Government Technical POC.

2. REFERENCE/ATTACHMENT: N/A

3. REQUIREMENTS:

3.1 Deliver and install the item listed in 1.3.1 to the designated Delivery Location at paragraph 1.2. Provide leveling work and on-site piping installation.

3.2 Trial run adjustment, operation, and maintenance technical guidance.

3.3 Custom machine to available:440V specification.

3.4 Piping components (SUS piping, made of stainless steel).

3.5 Provide documentation of SDS and instruction manual for the oil used (one copy each of the Japanese and English versions) includes PCB certificate.

4. GOVERNMENT FURNISHED:

4.1 MATERIAL (GFM): None.

4.2 EQUIPMENT (GFE): None.

4.3 SERVICE: The Government performs electrical wiring work.

5 NOTE:

5.1 The Government Technical POC:

Name: Travis Takehara

Title: Equipment Specialist

Command/Ship: SRF JRMC DET Sasebo

TEL: 0956-50-3280

E-Mail: travis.t.takehara.civ@us.navy.mil

5.2 Only the Government Technical POC has authority to coordinate schedule with the contractor within terms and conditions of this contract. The Government Technical POC will coordinate base access and provide escorts for the contractor if escorts are required for personnel entering, departing, and working in required areas. Ask any payment issue as the first POC.

5.3 Only the Contracting Officer and/or designated Contracting POC (see block 9 at the 1st page) have authority to change any terms and conditions of this contract. Report any conditions, discrepancies, and/or finding to the Contracting POC via the Government Technical POC. In the event the Contractor effects any change at the direction of any person other than the Contracting Officer, the change will be considered to have been made without authority, and no adjustment will be made in the contract price to cover any increase in charges incurred as a result thereof. See NAVSUP Local Text titled "Authorized Changes Only by the Contracting Officer."

(End of Item Description)

PSC 473 BOX 11, FPO AP 96349-1500

FPO, AP 96349-1500

UNITED STATES

Fumika Yamasaki, Email: fumika.yamasaki2.ln@us.navy.mil Telephone: 0956-50-2851 AdminBy:

SCD: PAS: