N6247019Q8018_SOW8018_.docx

PERFORMANCE WORK STATEMENT

ON-SITE TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DUCT AIR LEAKAGE TEST (DALT)

References:

1. UFGS 23 05 93, Testing, Adjusting, and Balancing for HVAC, Dated November 2015

Provide a 5-day training course entitled, Training for Commercial Air and Hydronic Balancing on-site training. The basic requirement shall be delivered at three (3) site locations as noted below. Option to provide training at three other sites are also noted below. Length of the course shall be 5 days, 8 hours per day. The Courses shall be delivered by one or two instructors.

This course provides instruction to students the elements required to perform commercial air and hydronic testing and balancing. The training also provides hands on training. The training must be compliant with the UFGS 23 05 93 specification “Testing, Adjusting, and Balancing for HVAC” testing and balancing of air and hydronic systems including the processes and procedures with hands on training. The training must also provide Duct Air Leakage Test processes and procedures with hands on training. The training shall follow the reference (a) UFGS Section 23 05 93 so that the students will know and understand the procedures used on a construction site. The UFGS is found at the Whole Building Design Guide web site at http://www.wbdg.org/FFC/DOD/UFGS/UFGS%2023%2005%2093.pdf The training shall include all the safety processes and instructions used in testing and balancing and DALT. The training shall also include discussions on the AABC and NEBB and SMACNA standards and requirements, including forms and reports.

The course must provide training at 20 students at each site location as the base. Option: Provide training to 30 students at each site.

Provide each student NBC training manuals, training materials, books, workbooks, and other written materials.

Base - Course locations are as follows:

NAVFAC Atlantic, Norfolk, VA Date TBD – TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

NAVFAC SW, San Diego, CA Date TBD – TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

NAVFAC Pacific, Pearl Harbor, HI Date TBD - TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

Option - Course locations are as follows:

NAVFAC Northwest, Silverdale, WA Date TBD - TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

NAVFAC SE, Jacksonville, FL Date TBD - TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

NAVFAC Wash, Washington, DC

Date TBD - TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

The Government shall reserve conference rooms at each location.

The Government shall reserve a physical location for the hands on training for Air & Hydronic and DALT testing during training Certificates of Attendance shall be developed by the vendor and distributed by NAVFAC, based on Trainees attendance. Certificates shall specify Continuing Education Units (CEUs), Professional Development Hours (PDHs), and Learning Units (LUs) for each course that can be used toward renewal of state-licensed professionals and maintenance of LEED professional credentials.

0. Scope Phases, Meetings and Requirements:

0. Training: Vendor shall ensure that student course feedback is taken from each student at the end of each course and that comments are compiled and provided to Government Project Manager.

0. After Action Review (AAR): Vendor shall participate in an After Action Review with the Government Project Manager to review student feedback to make adjustments to the course material / presentation venue as is required. The AAR shall be executed telephonically.

0. Meetings

0. Training (On Site)

0. After Action Review (Telephone)

1. Travel and subsistence: Required to send instructors to the six locations.

1. Schedule of Fees and Options: (To be filled in at conclusion of negotiations on contracts)

Base Locations NAVFAC Atlantic, Norfolk, VA Date TBD - TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

Base Location Training Course Delivery for up to 20 students ____________

NAVFAC SW, San Diego, CA Date TBD - TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

Base Location Training Course Delivery for up to 20 students ____________

NAVFAC Pacific, Pearl Harbor, HI Date TBD - TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

Base Location Training Course Delivery for up to 20 students ____________

Option - Course locations are as follows:

NAVFAC Northwest, Silverdale, WA Date TBD - TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

Option Location Training Course Delivery for up to 20 students ____________

NAVFAC SE, Jacksonville, FL Date TBD - TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

Option Location Training Course Delivery for up to 20 students ____________

NAVFAC Wash, Washington, DC Date TBD - NBC TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

Option Location Training Course Delivery for up to 20 students ____________

TOTAL CONTRACT TASK ORDER VALUE: _____________

1. Submittal Due Dates: Work shall begin upon receipt of contract document and pursued diligently in accordance with the date / schedule established therein. Assessment of the schedule shall be provided bi-weekly to the NAVFAC Atlantic CIME.

Project Title – TRAINING FOR COMMERICAL AIR AND HYDRONIC BALANCING AND DALT ON-SITE TRAINING

VENDOR DELIVERY DATES

Base Locations

Option Locations

*Specific dates shall be established during negotiations.