NSWC_PCD_Pre-Solicitation_Conference_-_N61331-18-R-0006_2FEB18.pptx

Quickstrike System Description Mission: Air deployed, sea-bottom mines that serve as a strategic threat to enemy ships and submarines transiting in shallow waters.

Platform: Navy & Air Force aircraft: F/A-18, P-3, B-52, B-1, B-2

Employment: Delivered by U.S. Navy and U.S. Air Force aircraft, dropped over planned minefield location. Once emplaced, mines activate and wait for a valid target signal before detonating.

The Quickstrike is a family of shallow water, aircraft laid mines used primarily against surface and subsurface craft. Quickstrike versions (MK 62/MK 63) are converted general purpose 500 lb and 1000 lb bombs. The MK 65 is a 2,000 lb mine, which utilizes a thin-walled mine case vice a bomb body to enhance terminal effects.

DISTRIBUTION STATEMENT A: Approved for public release

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY

System Architecture

S&A Mk 45 Mod 1 TDD Mk 71 Mod 1 TDD Adapter Mk 157 Mod 0

Mine Case Mk 45

QS MK 65 MOD 3

S&A Mk 75 Mod 1 TDD Mk 71 Mod 1

BLU-110/111

TDD Adapter Ring Mk 163 Mod 0

QS MK 62/63 MOD 3

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY

Quickstrike Mod 3 Procurement Plan TDD Adapter MK 157 Mod 0

MK 157

Container

TDD MK 71 Mod 1

MK 71

TDD Adapter MK 163 Mod 0

MK 163

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY

Target Detecting Device MK 71 Mod 1 Is an electronic, solid state, passive target sensing device Its a mission specific weapon system component intended to reliably operate after long periods of storage Its architecture consists of a microcontroller, flash memory, and passive sensor channels It includes three passive sensors that are designed to provide high sensitivity and minimal electrical/electronic noise Some of it's materials require sources of supply that specialize in pure metals and synthesized ceramics, such as Permeable Magnetic Metal Ceramic Piezo Electric crystals Utilizes potting material that requires detailed vacuuming, layering, and aging as part of the curing process Device is marked as a CONFIDENTIAL in its final assembly form

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY

Target Detecting Device Adapter MK 157 Mod 1 It consists of a machined metal assembly with an attached wiring harness

It's wiring harness terminates with D-shape and circular military type connectors.

Its housing is made out of Aluminum alloy 6061-T6

This effort involves fabrication of metal parts and installation of commercially available helical coil inserts

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY

Target Detecting Device Ring Adapter MK 163 Mod 0 It consists of a machined aluminum ring with helical coil inserts

Its housing is made out of Aluminum alloy 6061-T6

It has design features on it for a Torque wrench adapter tool assembly for installation of the MK 71 Mod 1

This effort involves fabrication of metal parts and installation of commercially available helical coil inserts.

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY

Technical Requirements Overview

FACILITIES

Provide description of the facilities to be used for accommodating the flow of manufacturing ; including the capability for assembly, testing, and storage

Provide description of the test equipment and facilities for environmental test requirements, such as:

water impact testing, vibration testing, temperature cycling, high pressure testing, and destructive physical analysis to perform acceptance testing, and any conceptual test set-up and facility that can accommodate functional testing.

Provide description of personnel resources available for the contract, to include experiences and skill levels of key personnel to be assigned to the contract

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY

MANUFACTURING PROCESSES

Provide description of the overall manufacturing approach including production processes, procedures, material handling and controls for the fabrication for all three products

Address the procedures for the critical processes expected during manufacture of all three products, such as:

Machining close tolerance metal parts and plating Fabrication of surface mount printed wiring assemblies Potting procedures and compound curing techniques, particularly as they apply to the pressure sensor Processes for manufacturing, inspecting, and special tooling required to fabricate the magnetometer with focus on winding the coil assembly Plasma treatment prescribed in the drawing(s) Electrostatic Discharge (ESD) Controls during manufacturing Equipment, including the software package, that will be used to program a Field Programmable Gate-Array Soldering process controls

Provide description of the test program including in-process testing, inspection procedures, and test equipment calibration that will be implemented to verify compliance with the requirements of weapon specifications, drawings, and statement of work (SOW)

Provide an Integrated master schedule (IMS) for each of the products Technical Requirements Overview

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY

QUALITY CONTROL ASSURANCE PLAN

Quality Assurance:

Provide copy of a Quality Management Plan (QMP) tailored to the requirements of the SOW for production of all three products and the other products required by the solicitation

Provide description of the in-house process control program(s) that will be used to certify the inspection, test, and acceptance procedures are being followed

Provide description of the processes that will be used to certify adequate quality in the following areas of contract performance:

Vendor Selection and Controls - describe the process for selecting qualified suppliers, transmittal of design and quality requirements, and determining the adequacy of procured items and effective provisions for corrective actions of nonconformance

Receiving Inspection – describe the process and procedure for incoming materials, components, and subassemblies what will be subjected to receiving inspections and to what inspection level (100% or sampling)

Inspection:

Provide description on how the Calibration of Test Equipment will be traceable to a prime laboratory calibration standard of the National Institute of Standards and Technology (NIST)

Configuration Management:

Provide description of the standards and requirements that will be utilized for configuration control of production drawings

Provide description of the configuration management structure to control system configuration, to include interfaces between configuration management, engineering drawings, QA, and production programs.

Technical Requirements Overview

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY

Questions

FOR OFFICIAL USE ONLY

FOR OFFICIAL USE ONLY

image3.png image4.jpeg image5.png image6.png image14.gif image15.jpeg image16.gif image7.png image8.jpeg image9.jpeg image10.png image11.jpeg image12.gif image13.png image17.png image18.png image19.png image20.png image21.jpg image22.JPG image2.png