N61331-15-R-0015.doc

Section B - Supplies or Services and Prices

First Article

FFP

The Contractor shall provide first article panel and test report IAW Statement of Work (SOW), entitled Landing Craft Air Cushion Lightweight Armor Panels, Section J Attachments and Section I FAR 52.209-4 is applicable. The contractor shall, utilizing CLIN 0001's Exhibit A, provide all data as specified per the Not Separately Priced (NSP) Contract Data Requirements List (CDRLs).

FOB: Destination

MAX

NET AMT

Part Number 164-7403836-001

Part Number 164-7403836-001 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-003

Part Number 164-7403836-003 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-005

Part Number 164-7403836-005 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-007

Part Number 164-7403836-007 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-008

Part Number 164-7403836-008 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-013

Part Number 164-7403836-013 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-015

Part Number 164-7403836-015 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-017

Part Number 164-7403836-017 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-019

Part Number 164-7403836-019 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-021

Part Number 164-7403836-021 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-023

Part Number 164-7403836-023 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-029

Part Number 164-7403836-029 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

Part Number 164-7403836-031

Part Number 164-7403836-031 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments. Production under this CLIN shall not commence until written authorization to proceed is received from the Government IAW SOW paragraph 3.1.1.

MAX

CDRL

The contractor shall, utilizing Section J Exhibit A, provide all data as specified per the Not Separately Priced (NSP) Contract Data Requirements List (CDRLs).

MAX

FFP

Part Number 164-7403836-001 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-003 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-005 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-007 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-008 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-013 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-015 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-017 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-019 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-021 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-023 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-029 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-031 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

The contractor shall, utilizing Section J Exhibit A, provide all data as specified per the Not Separately Priced (NSP) Contract Data Requirements List (CDRLs).

MAX

FFP

Part Number 164-7403836-001 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-003 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-005 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-007 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-008 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-013 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-015 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-017 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-019 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-021 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-023 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-029 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

Part Number 164-7403836-031 in accordance with Section C Statement of Work, entitled Landing Craft Air Cushion Lightweight Armor Panels, and Section J Attachments.

MAX

FFP

The contractor shall, utilizing Section J Exhibit A, provide all data as specified per the Not Separately Priced (NSP) Contract Data Requirements List (CDRLs).

MAX

Section C - Descriptions and Specifications

STATEMENT OF WORK

STATEMENT OF WORK

FOR

LANDING CRAFT AIR CUSHION (LCAC) LIGHTWEIGHT ARMOR PANELS

1.0 SCOPE

The Naval Surface Warfare Center, Panama City (NSWC PCD) provides lightweight Landing Craft Air Cushion (LCAC) armor panels for the fleet’s use. Contractor support is required to manufacture and deliver LCAC lightweight armor panels. The contractor shall provide personnel, materials, and facilities to accomplish all tasking specified below.

2.0 APPLICABLE DOCUMENTS

The following documents, of the exact issue shown, form a part of this statement of work (SOW) to the extent specified herein. In the event of conflict between the documents referenced and the contents of this SOW, the SOW shall supersede.

2.1 Military Standards: None

2.2 Military Specifications: None

2.3 Other Documents

(a) NAVSEA Drawing 164-7403836 REV D

(b) Specification for Portable Composite Armor For Landing Craft Air Cushion 16 July 2004 (Revised 21 April 2010)

(c) ISO Q9001-2008, Quality Management Systems - Requirements - Fourth Edition dated 11/15/2008

3.0 REQUIREMENTS

The Contractor shall have a quality system that meets the requirements of ISO 9001-2008. The Contractor shall provide LCAC lightweight armor panels in accordance with NAVSEA drawing 164- 7403836 REV D and the attached specifications (including the classified Appendix A containing ballistics data to the specification that is provided separately). The Contractor shall provide the quantities of each armor panel Part Number listed in Section B of the contract.

3.1 First Article Requirement

The LCAC lightweight armor panels require first article inspection and approval by NSWC PCD. The first article shall be armor panel assembly 164-7403836-001. The first article shall be inspected for compliance with the classified Appendix A to SOW paragraph 2.3(b). Subject to passing first article inspection, this panel assembly will be delivered to NSWC PCD within 60 days after contract award. Manufacture of production panels shall not commence until the NSWC PCD Contracting Officer has advised the contractor in writing of successful completion of the first article inspection which shall include all necessary environmental testing.

3.1.1 First Article Test (FAT) Requirements

a. Manufactured and Previously Tested for Ballistics.

If the Contractor has previously manufactured and delivered armor to the specifications and drawing specified herein and the armor passed the ballistic tests specified in the classified Appendix A to SOW paragraph 2.3(b), the Contractor may submit a copy of the passing ballistic test report from the independent certified ballistic test facility and subsequent NSWC PCD approval in lieu of the First Article Test panel.

b. Not Previously Tested for Ballistics.

The Contractor shall build one (1) panel assembly 164-7403836-001 as specified in SOW Paragraph 2.3(b) and submit it to an independent certified ballistic test facility for ballistic testing in accordance with SOW Paragraph 2.3(b) and the classified Appendix A (provided separately). The Contractor shall obtain Government approval of the ballistic test facility prior to shipping the panels for test. Test reporting shall be in accordance with SOW Paragraph 2.3(b) and the Contract Data Requirements List (CDRL) DD Form 1423.

After the Contractor receives ballistic test facility approved test reports, the Contractor shall submit one (1) each First Article panel assembly to NSWC PCD for Government First Article (environmental testing) inspection under CLIN 0001. The contractor shall not proceed with further production until Government approval of the First Article panel is received. After review and acceptance of the ballistic test reports and First Article, the Government will provide the Contractor with written authorization to proceed.

3.2 Production Lot Requirements

After receiving written authorization to proceed per SOW paragraph 3.1.1, the Contractor shall manufacture up to three ship sets of LCAC lightweight armor panels in accordance with NAVSEA drawing 164-7403836 REV D and the attached specifications. Each ship set shall consist of the following part numbers and quantities (reference NAVSEA drawing 164-7403868 REV D): Each part shall include CDRL A001.

Quantity Part Number

164-7403836-001

164-7403836-003

164-7403836-005

164-7403836-007

164-7403836-008

164-7403836-013

164-7403836-015

164-7403836-017

164-7403836-019

164-7403836-021

164-7403836-023

164-7403836-029

164-7403836-031

Required: 58 panels per ship set.

The Contractor shall have ballistic testing performed on a minimum of four (4) each random samples of panel assembly 164-7403836-001 from each ship set in accordance with SOW Paragraph 2.3(b). Random samples shall be selected by the Government. The Contractor shall notify the Government 15 days prior to the completion of the production lot. The Government will make the necessary travel arrangements to arrive at the Contractor's facility based on the Contractor's notification regarding the production lot. The Contractor shall obtain Government approval of the ballistic test facility prior to shipping the panels for testing. Ballistic test reports shall be submitted in accordance with the CDRL A002.

4.0 GOVERNMENT FURNISHED PROPERTY

None

5.0 SECURITY

Performance of this requirement will require the Contractor to access and store classified information up to the CONFIDENTIAL level. The Contractor will be required to generate classified information to perform this requirement. The provisions of the attached DD Form 254 will take precedence.

The Prime Contractor shall:

(1) Forward copies of DD Form 254s provided to subcontractors to the Naval Surface Warfare Center Panama City Division (NSWC PCD), ATTN: Security, 110 Vernon Ave, Panama City Beach, Fl 32407.

(2) Direct the subcontractor to obtain approval, through the prime contractor, for the public release of information received or generated by the sub through the prime contractor.

(3) Submit the subcontractor’s request for public release through the technical point of contact identified on the DD Form 254.

5.1 Minimum Requirements for Access to Controlled Unclassified Information (CUI) Prior to access, contractor personnel requiring access to DON controlled unclassified information (CUI) or "user level access to DON or DoD networks and information systems, system security and network defense systems, or to system resources providing visual access and/or ability to input, delete or otherwise manipulate sensitive information without controls to identify and deny sensitive information" contractors must have clearance eligibility, or submit an Electronic Questionnaire for Investigation Processing (SF 86) to NSWC PCD Security for processing and subsequent adjudication by the DON Central Adjudication Facility.

5.2 Minimum Protection Requirements for Controlled Unclassified Information Security classification guides (OPNAVINST 5513 series) and unclassified limited documents (e.g., FOUO, Distribution Statement Controlled) are not authorized for public release and, therefore, cannot be posted on a publicly accessible webserver or transmitted over the Internet unless appropriately encrypted.

5.3 Controlled Unclassified Information (CUI)

Controlled unclassified information (CUI) is official information that requires the application of controls and protective measures for a variety of reasons and has not been approved for public release, to include technical information, proprietary data, information requiring protection under the Privacy Act of 1974, and Government- developed privileged information involving the award of contracts. CUI is a categorical designation that refers to unclassified information that does not meet the standards for National Security Classification under Executive Order 13526, but is (a) pertinent to the national interest of the United States or to the important interests of entities outside the Federal Government, and (b) under law or policy requires protection from unauthorized disclosure, special handling safeguards, or prescribed limits on exchange or dissemination.

5.4 For Official use Only (FOUO)

FOUO is a document designation, not a classification. This designation is used by Department of Defense (DoD) and a number of other federal agencies to identify information or material, which although unclassified, disclosure to the public of the information would reasonably be expected to cause a foreseeable harm to an interest protected by one or more provisions of the FOIA. This includes information that qualifies for protection pursuant to the provisions of the Privacy Act of 1974, as amended. FOUO must be marked, controlled and safeguarded in accordance with DoD 5200.01, Vol. 4, DoD Information Security Program: Controlled Unclassified Information (CUI), February 24, 2012

5.5 Security of Unclassified DoD Information on Non-DoD Information Systems (DoD 8582.01) DoD Policy Adequate security be provided for all unclassified DoD information on non-DoD information systems. Appropriate requirements shall be incorporated into all contracts, grants, and other legal agreements with non-DoD entities. Information Safeguards are applicable to unclassified DoD information in the possession or control of non-DoD entities on non-DoD information systems, to the extent provided by the applicable contract, grant, or other legal agreement with the DoD.

Information Safeguards Unclassified DoD information that has not been cleared for public release may be disseminated by the contractor, grantee, or awardee to the extent required to further the contract, grant, or agreement objectives, provided that the information is disseminated within the scope of assigned duties and with a clear expectation that confidentiality will be preserved. Examples include:

a. Non-public information provided to a contractor (e.g., with a request for proposal).

b. Information developed during the course of a contract, grant, or other legal agreement (e.g., draft documents, reports, or briefings and deliverables).

c. Privileged information contained in transactions (e.g., privileged contract information, program schedules, contract-related event tracking).

It is recognized that adequate security will vary depending on the nature and sensitivity of the information on any given non-DoD information system. However, all unclassified DoD information in the possession or control of non- DoD entities on non-DoD information systems shall minimally be safeguarded as follows:

a. Do not process unclassified DoD information on publically available computers (e.g., those available for use by the general public in kiosks or hotel business centers).

b. Protect unclassified DoD information by at least one physical or electronic barrier (e.g., locked container or room, logical authentication or logon procedure) when not under direct individual control of an authorized user.

c. At a minimum, overwrite media that have been used to process unclassified DoD information before external release or disposal.

d. Encrypt all information that has been identified as CUI when it is stored on mobile computing devices such as laptops and personal digital assistants, compact disks, or authorized removable storage media such as thumb drives and compact disks, using the best encryption technology available to the contractor or teaming partner.

e. Limit transfer of unclassified DoD information to subcontractors or teaming partners with a need to know and obtain a commitment from them to protect the information they receive to at least the same level of protection as that specified in the contract or other written agreement.

f. Transmit e-mail, text messages, and similar communications containing unclassified DoD information using technology and processes that provide the best level of privacy available, given facilities, conditions, and environment. Examples of recommended technologies or processes include closed networks, virtual private networks, public key-enabled encryption, and transport layer security (TLS).

g. Encrypt organizational wireless connections and use encrypted wireless connections where available when traveling. If encrypted wireless is not available, encrypt document files (e.g., spreadsheet and word processing files), using at least application-provided password protected level encryption.

h. Transmit voice and fax transmissions only when there is a reasonable assurance that access is limited to authorized recipients.

i. Do not post unclassified DoD information to website pages that are publicly available or have access limited only by domain or Internet protocol restriction. Such information may be posted to website pages that control access by user identification and password, user certificates, or other technical means and provide protection via use of TLS or other equivalent technologies during transmission. Access control may be provided by the intranet (vice the website itself or the application it hosts)j. Provide protection against computer network intrusions and data exfiltration, minimally including:

(1) Current and regularly updated malware protection services, e.g., anti-virus, anti-spyware.

(2) Monitoring and control of both inbound and outbound network traffic (e.g., at the external boundary, sub- networks, individual hosts), including blocking unauthorized ingress, egress, and exfiltration through technologies such as firewalls and router policies, intrusion prevention or detection services, and host-based security services. Prompt application of security-relevant software patches, service packs, and hot fixes.

k. Comply with other current Federal and DoD information protection and reporting requirements for specified categories of information (e.g., medical, proprietary, critical program information (CPI), personally identifiable information, export controlled) as specified in contracts, grants, and other legal agreements.

l. Report loss or unauthorized disclosure of unclassified DoD information in accordance with contract, grant, or other legal agreement requirements and mechanisms.

m. Do not use external IT services (e.g., e-mail, content hosting, database, document processing) unless they provide at least the same level of protection as that specified in the contract or other written agreement.

5.6 Operations Security

Operations Security (OPSEC) is concerned with the protection of critical information: facts about intentions, capabilities, operations, or activities that are needed by adversaries or competitors to bring about failure or unacceptable consequences of mission accomplishment.

Critical information includes information regarding:

- Operations, missions, and exercises, test schedules or locations;

- Location/movement of sensitive information, equipment, or facilities;

- Force structure and readiness (e.g., recall rosters);

- Capabilities, vulnerabilities, limitations, security weaknesses;

- Intrusions/attacks of DoD networks or information systems;

- Network (and system) user IDs and passwords;

- Movements of key personnel or visitors (itineraries, agendas, etc.); and

- Security classification of equipment, systems, operations, etc.

The contractor, subcontractors and their personnel shall employ the following countermeasures to mitigate the susceptibility of critical information to exploitation, when applicable:

- Practice OPSEC and facilitate OPSEC awareness;

- Immediately retrieve documents from printers assessable by the public;

- Shred sensitive and Controlled Unclassified Information (CUI) documents when no longer needed;

- Protect information from personnel without a need-to-know;

- When promulgating information, limit details to that essential for legitimacy;

- During testing and evaluation, practice OPSEC methodologies of staging out of sight, desensitization, or speed of execution, whenever possible.

CLAUSES INCORPORATED BY FULL TEXT

HQ C-2-0026 FIRST ARTICLE (CONTRACTOR TESTING) (NAVSEA) (SEP 1990)PRIVATE

(a) For the purpose of this contract, the "First Article" is synonymous with the terms "preproduction model(s) and "preproduction equipment".

(b) The First Article shall conform in every respect to the requirements of this contract and shall be fully tested by the Contractor at its own expense to determine compliance with said requirements. The production equipment shall be manufactured with tools, material and methods which are the same as or representative of the tools, material and methods which were used to manufacture the First Article.

(c) Pursuant to paragraph (e) of the clause entitled "FIRST ARTICLE APPROVAL--CONTRACTOR TESTING" (FAR 52.209-3), the First Article shall not be delivered as part of the production quantity.*

CLAUSES INCORPORATED BY FULL TEXT

HQ C-2-0062 WAIVER OF FIRST ARTICLE REQUIREMENTS (NAVSEA) (SEP 1990)PRIVATE

If the First Article is waived by the Government, the Contractor shall deliver supplies that are identical or substantially identical to those previously accepted by the Government under the following contract(s):

(Offeror to fill in contract number(s), as applicable. See Section M)

Section D - Packaging and Marking

CLAUSES INCORPORATED BY FULL TEXT

HQ D-2-0006

MARKING AND PACKING LIST(S) (NAVSEA) (NOV 1996)

(a) Marking. Shipments, shipping containers and palletized unit loads shall be marked in accordance with best commercial practice.

(b) Packing List(s). A packing list (DD Form 250 Material Inspection and Receiving Report may be used) identifying the contents of each shipment, shipping container or palletized unit load shall be provided by the Contractor with each shipment. When a contract line item identified under a single stock number includes an assortment of related items such as kit or set components, detached parts or accessories, installation hardware or material, the packing list(s) shall identify the assorted items.

Where assortment of related items is included in the shipping container, a packing list identifying the contents shall be furnished.

(c) Master Packing List. In addition to the requirements in paragraph (b) above, a master packing list shall be prepared where more than one shipment, shipping container or palletized unit load comprise the contract line item being shipped. The master packing list shall be attached to the number one container and so identified.

(d) Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.246-11 Higher-Level Contract Quality Requirement (DEC 2014)

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

ANSI/ISO/ASQ 9001-2008

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in--

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require--

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology.

(End of clause)

CLAUSES INCORPORATED BY FULL TEXT

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008)

(a) At the time of each delivery of supplies or services under this contract, the Contractor shall prepare and furnish to the Government a material inspection and receiving report in the manner and to the extent required by Appendix F, Material Inspection and Receiving Report, of the Defense FAR Supplement.

(b) Contractor submission of the material inspection and receiving information required by Appendix F of the Defense FAR Supplement by using the Wide Area WorkFlow (WAWF) electronic form (see paragraph (b) of the clause at 252.232-7003) fulfills the requirement for a material inspection and receiving report (DD Form 250). Two copies of the receiving report (paper copies of either the DD Form 250 or the WAWF report) shall be distributed with the shipment, in accordance with Appendix F, Part 4, F-401, Table 1, of the Defense FAR Supplement.

(End of clause)

HQ E-1-0001

INSPECTION AND ACCEPTANCE LANGUAGE FOR DATA

Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423.

HQ E-2-0008 INSPECTION AND TEST RECORDS (NAVSEA) (MAY 1995)

Inspection and Test Records: Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness.

HQ E-2-0015 QUALITY MANAGEMENT SYSTEM REQUIREMENTS (NAVSEA) (SEP 2009)

Quality Management System Requirements. The Contractor shall provide and maintain a quality management system that, as a minimum, adheres to the requirements of ANSI/ISO/ASQ 9001-2008 Quality Management Systems and supplemental requirements imposed by this contract. The quality management system procedures, planning, and all other documentation and data that comprise the quality management system shall be made available to the Government for review. Existing quality documents that meet the requirements of this contract may continue to be used. The Government may perform any necessary inspections, verifications, and evaluations to ascertain conformance to requirements and the adequacy of the implementing procedures. The Contractor shall require of subcontractors a quality management system achieving control of the quality of the services and/or supplies provided. The Government reserves the right to disapprove the quality management system or portions thereof when it fails to meet the contractual requirements.

Section F - Deliveries or Performance

COMPLETION DATES

Period of Performance (POP) reflects delivery time period for the base and two (2) option periods, if exercised. Delivery Orders will specify actual delivery dates for each order.

DELIVERY INFORMATION

17-AUG-2016

RECEIVING OFFICER

BUILDING 100

101 VERNON AVENUE

PANAMA CITY BEACH FL 32407-7001

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2016

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2017

N61008

17-AUG-2016

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2018

N61008

17-AUG-2016

N61008

CLAUSES INCORPORATED BY REFERENCE

FIRST ARTICLE TESTING

In accordance with Clause HQ M-2-0013, if the offeror complies with the provisions and the government accepts Offer B, the delivery schedule for CLIN 1 will be consistent with the delivery schedules for CLINS 0002-0014, 1001-1013, and 2001-2013.

Section G - Contract Administration Data

CLAUSES INCORPORATED BY FULL TEXT

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through

WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

Invoice and Receiving Report Combo

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

See Section E – Inspection and Acceptance

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF

Data to be entered in WAWF

Pay Official DoDAAC

N62860

Issue By DoDAAC

N61331

Admin DoDAAC

Inspect By DoDAAC

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

michael.d.riley3@navy.mil kenneth.longstreet@navy.mil

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

NSWC PCD WAWF Point of Contacts (POCs): Janet.Stone@navy.mil and Brian.W.Young@navy.mil

**Please send an e-mail to both POCs.

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

Section H - Special Contract Requirements

DISTRIBUTION STATEMENT

RELEASE OF INFORMATION

All technical data provided to the contractor by the Government or developed by the contractor for Government shall be protected from public disclosure in accordance with the markings contained in attached drawings. All other information relating to the items to be delivered or services to be performed under the resulting purchase/delivery order may not be disclosed by any means without prior approval of the authorized representative of the Contracting Officer. Dissemination or public disclosure includes, but is not limited to: permitting access to such information by foreign nationals or by any other persons or entity; publication of technical or scientific papers; advertising, or; any other proposed public release. The contractor shall provide adequate physical protection to such information so as to preclude access by any person or entity not authorized such access by the Government.

EXPORT CONTROL ACT

Distribution Statement D: Distribution authorized to DoD and DoD Contractors only; Critical Technology (24 April 2009). Other U.S. requests for this document shall be referred to PEC Ships Washington Navy Yard DC (PMS 377).

WARNING: Drawings contain technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2841, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. APP 2401 et seq.). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions OPNAVINST 5510.161

Destruction Notice: This document may be destroyed by any means that will prevent disclosure of contents or reconstruction of the document.

** It is important to note that discussion with a foreign national in the United States, or a person "acting on behalf of a foreign person," constitutes an "export" if it reveals technical information regarding export-controlled technology.**

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE