A5 - Statement of Work.pdf

STATEMENT OF WORK

FOR

EMERGENCY BREATHING APPARATUS COMPRESSORS (EBAC) FRAME KIT

FABRICATION

1.0 SCOPE

This Statement of Work (SOW) establishes the procurement requirements to fabricate and assemble frame assemblies for use in the Emergency Breathing Air Compressor (EBAC) system consisting of compressors, hoses and other support items. The items will be manufactured in accordance with drawings previously developed by U.S. Navy personnel. The contractor shall provide all personnel, materials, and facilities to accomplish statement of work tasking below.

2.0 APPLICABLE DOCUMENTS

The following documents of the exact issue form a part of this SOW to the extent specified herein. In the event of conflict between the documents referenced and the contents of this Statement of Work, the contents of this Statement of Work shall take precedence. Second tier and lower reference documents (i.e., those referenced in the primary references) shall be used for guidance only.

2.1 Military Standards

a) MIL-STD-129 Marking for Shipment and Storage

b) MIL-STD-2073-1 Parts and Equipment, Procedures for Packaging and Packing of

2.2 Military Specifications

None

2.3 Other Publications

a) NAVSEA Drawing 7246227 Emergency Breathing Air Compressor Frame Kit

Configuration

3.0 REQUIREMENTS

3.1 Fabrication Support

3.1.1 The contractor shall fabricate and assemble EBAC frame kits in accordance with NAVSEA Drawing 7246227. The specific item quantities are specified in SOW paragraph 5.2.

3.2 Characteristics

3.2.1 Quality

The contractor shall utilize new materials and components in the manufacture of each locker, stowage bag, enclosure and other items. The contractor shall take reasonable precautions to prevent damage to each EBAC frame kit during fabrication, inspection, shipping and delivery.

3.2.2 Workmanship

Each EBAC frame kit shall be free of defects that may indicate poor workmanship. Mechanical components shall be uniform in appearance and free from cross-threading, burrs, scratches, cracks, breaks, pits, dents, chips, sharp projections of edges, lose parts, or foreign material that may adversely affect the various items serviceability, performance, reliability, endurance, ware or safety.

3.3 Quality Assurance

3.3.1 Responsibility for Inspection

The contractor is responsible for the performance of all inspections and examinations specified herein. The Government reserves the right to perform any of the inspections set forth in this SOW where such inspections are deemed necessary to ensure supplies and services conform to the prescribed requirements. (CDRL A001)

3.3.2 Quality Conformance Inspection

The quality conformance inspection shall verify that requirements of this SOW have been met.

Each EBAC frame kit shall be inspected for conformance to the requirements of the drawings in SOW paragraph

2.3. An EBAC frame kit with one or more defects shall be classified defective and rejected. A rejected EBAC frame kit that has had all deficiencies corrected shall be resubmitted for completion of the entire inspection sequence. Acceptance shall be inspected for conformance to Section 5 of this SOW, “Preparation For Delivery”.

(CDRL A001)

3.4 Certificate of Compliance

Each EBAC frame shall be delivered with a Certificate of Compliance that all manufacturing and inspection requirements have been met. (CDRL A002)

3.5 Preparation for Delivery

3.5.1 General

Each frame kit shall be packed together with all attaching hardware for one kit. Each EBAC frame kit shall be secured (upright) in its own shipping container by straps or fasteners. Place adequate packing in all dead spaces around the locker/stowage bag. The outside of the shipping container shall indicate proper shipping orientation (i.e., “THIS SIDE UP”) with arrows on each side of the container.

3.6.2 Marking

Mark each shipping container for shipment and storage in accordance with MIL-STD-129. The

"Ship To" address for each item will be specified in each individual delivery order.

4.0 GOVERNMENT FURNISHED PROPERTY

4.1 Government Furnished Equipment (GFE)

4.2 Government Furnished Material (GFM)

4.3 Government Furnished Information (GFI)

GFI in the form of NAVSEA Drawing 7246227 will be provided with the Request For Quote (RFQ).

Additional GFI will be provided upon formal request by the contractor.

5.0 DELIVERABLES

5.1 Data Deliveries

All data deliverables shall be submitted in accordance with the attached DD Form 1423.

5.2 Hardware Deliveries

CLIN

Description

Drawing Number

Quantity

Date Due BASE EBAC Frame Kit 7246227 64 See Below

Delivery Schedule:

16ea – 180 DAC* 16ea – 240 DAC 16ea – 300 DAC 16ea – 360 DAC

*DAC means “Days After Contract Award”

All items shall be delivered to:

Naval Surface Warfare Center Panama City Division Commanding Officer 110 Vernon Avenue, Building 100 Panama City, Florida 32407-7001

6.0 PERIOD OF PERFORMANCE

The base period of performance for the base period of this purchase order is from award of purchase order until 360 days from date of award.

7.0 SECURITY

This task is UNCLASSIFIED. Performance under this contract shall NOT require access to nor generate CLASSIFIED information.

7.1 Release of Information

(a) Release of information shall be in accordance with Section I, Defense Federal Acquisition

Regulation Supplement (DFARS) Clause 252.204-7000, Disclosure of Information.

(b) All technical data provided to the Contractor by the Government will be protected from public disclosure in accordance with the markings contained thereon. All other information relating to the items to be delivered or services to be performed under this contract may not be disclosed by any means without prior approval of the appropriate NSWC PCD authority. Dissemination or public disclosure includes, but is not limited to, permitting access to such information by foreign nationals or by any other person or entity; publication of technical or scientific papers; advertising; or any other proposed public release. The Contractor shall provide adequate physical protection to such information to preclude access by any person or entity not authorized such access by the Government.

7.2 Controlled Unclassified Information (CUI)

Controlled unclassified information (CUI) is official information that requires the application of controls and protective measures for a variety of reasons and has not been approved for public release, to include technical information, proprietary data, information requiring protection under the Privacy Act of 1974, and Government-developed privileged information involving the award of contracts. CUI is a categorical designation that refers to unclassified information that does not meet the standards for National Security Classification under Executive Order 13526, but is (a) pertinent to the national interest of the United States or to the important interests of entities outside the Federal Government, and (b) under law or policy requires protection from unauthorized disclosure, special handling safeguards, or prescribed limits on exchange or dissemination.

7.3 Minimum Requirements for Access to Controlled Unclassified Information (CUI)

Prior to access, Contractor personnel requiring access to Department of the Navy (DON) controlled unclassified information (CUI) or "user level access to DON or DoD networks and information systems, system security and network defense systems, or to system resources providing visual access and/or ability to input, delete or otherwise manipulate sensitive information without controls to identify and deny sensitive information" contractors must have clearance eligibility, or submit an Electronic Questionnaire for Investigation Processing (SF 86) to NSWC PCD Security for processing and subsequent adjudication by the DON Central Adjudication Facility.

7.4 Minimum Protection Requirements for Controlled Unclassified Information

Security classification guides and unclassified limited documents (e.g., CUI, Distribution Statement Controlled) are not authorized for public release and, therefore, cannot be posted on a publicly accessible webserver or transmitted over the Internet unless appropriately encrypted.

7.5 CUI

CUI is a designation, not a classification. CUI is used by Department of Defense (DoD) and a number of other federal agencies to identify information or material, which although unclassified, disclosure to the public of the information would reasonably be expected to cause a foreseeable harm to an interest protected by one or more provisions of the FOIA). This includes information that qualifies for protection pursuant to the provisions of the Privacy Act of 1974, as amended. CUI must be marked, controlled and safeguarded in accordance with DoDM

5200.48 Controlled Unclassified Information (CUI).

7.6 Security of Unclassified DoD Information on Non-DoD Information Systems (DoDI 8582.01)

DoD Policy: Adequate security shall be provided for all unclassified DoD information on non-DoD information systems. Appropriate requirements shall be incorporated into all contracts, grants, and other legal agreements with non-DoD entities.

Information Safeguards are applicable to unclassified DoD information in the possession or control of non-

DoD entities on non-DoD information systems, to the extent provided by the applicable contract, grant, or other legal agreement with the DoD.

Information Safeguards

Unclassified DoD information that has not been cleared for public release may be disseminated by the

Contractor, grantee, or awardee to the extent required to further the contract, grant, or agreement objectives, provided that the information is disseminated within the scope of assigned duties and with a clear expectation that confidentiality will be preserved. Examples include:

(a) Non-public information provided to a Contractor (e.g., with a request for proposal).

(b) Information developed during the course of a contract, grant, or other legal agreement (e.g., draft documents, reports, or briefings and deliverables).

(c) Privileged information contained in transactions (e.g., privileged contract information, program schedules, contract-related event tracking).

It is recognized that adequate security will vary depending on the nature and sensitivity of the information on any given non-DoD information system. However, all unclassified DoD information in the possession or control of non- DoD entities on non-DoD information systems shall minimally be safeguarded as follows:

(a) Do not process unclassified DoD information on publically available computers (e.g., those available for use by the general public in kiosks or hotel business centers).

(b) Protect unclassified DoD information by at least one physical or electronic barrier (e.g., locked container or room, logical authentication or logon procedure) when not under direct individual control of an authorized user.

(c) At a minimum, overwrite media that have been used to process unclassified DoD information before external release or disposal.

(d) Encrypt all information that has been identified as CUI when it is stored on mobile computing devices such as laptops and personal digital assistants, compact disks, or authorized removable storage media such as thumb drives and compact disks, using the best encryption technology available to the Contractor or teaming partner.

(e) Limit transfer of unclassified DoD information to subcontractors or teaming partners with a need to know and obtain a commitment from them to protect the information they receive to at least the same level of protection as that specified in the contract or other written agreement.

(f) Transmit e-mail, text messages, and similar communications containing unclassified DoD information using technology and processes that provide the best level of privacy available, given facilities, conditions, and environment. Examples of recommended technologies or processes include closed networks, virtual private networks, public key-enabled encryption, and transport layer security (TLS).

(g) Encrypt organizational wireless connections and use encrypted wireless connections where available when traveling. If encrypted wireless is not available, encrypt document files (e.g., spreadsheet and word processing files), using at least application-provided password protected level encryption.

(h) Transmit voice and fax transmissions only when there is a reasonable assurance that access is limited to authorized recipients.

(i) Do not post unclassified DoD information to website pages that are publicly available or have access limited only by domain or Internet protocol restriction. Such information may be posted to website pages that control access by user identification and password, user certificates, or other technical means and provide protection via use of transport layer security or other equivalent technologies during transmission. Access control may be provided by the intranet (vice the website itself or the application it hosts).

(j) Provide protection against computer network intrusions and data exfiltration, minimally including:

(1) Current and regularly updated malware protection services, e.g., anti-virus, anti-spyware.

(2) Monitoring and control of both inbound and outbound network traffic (e.g., at the external boundary, sub-networks, individual hosts), including blocking unauthorized ingress, egress, and exfiltration through technologies such as firewalls and router policies, intrusion prevention or detection services, and host-based security services.

(3) Prompt application of security-relevant software patches, service packs, and hot fixes.

(k) Comply with other current Federal and DoD information protection and reporting requirements for specified categories of information (e.g., medical, proprietary, Critical Program Information (CPI), personally identifiable information, export controlled) as specified in contracts, grants, and other legal agreements.

(l) Report loss or unauthorized disclosure of unclassified DoD information in accordance with contract, grant, or other legal agreement requirements and mechanisms.

(m) Do not use external IT services (e.g., e-mail, content hosting, database, document processing) unless they provide at least the same level of protection as that specified in the contract or other written agreement.

7.7 Operations Security

Operations Security (OPSEC) is concerned with the protection of critical information: facts about intentions, capabilities, operations, or activities that are needed by adversaries or competitors to bring about failure or unacceptable consequences of mission accomplishment.

Critical information includes information regarding:

Operations, missions, and exercises, test schedules or locations;

Location/movement of sensitive information, equipment, or facilities;

Force structure and readiness (e.g., recall rosters);

Capabilities, vulnerabilities, limitations, security weaknesses;

Intrusions/attacks of DoD networks or information systems;

Network (and system) user identifications and passwords;

Movements of key personnel or visitors (itineraries, agendas, etc.); and Security classification of equipment, systems, operations, etc.

The Contractor, subcontractors and their personnel shall employ the following countermeasures to mitigate the susceptibility of critical information to exploitation, when applicable:

Practice OPSEC and facilitate OPSEC awareness;

Immediately retrieve documents from printers assessable by the public;

Shred sensitive and Controlled Unclassified Information (CUI) documents when no longer needed;

Protect information from personnel without a need-to-know;

When promulgating information, limit details to that essential for legitimacy;

During testing and evaluation, practice OPSEC methodologies of staging out of sight, desensitization, or speed of execution, whenever possible.

8.0 DISTRIBUTION LIMITATION STATEMENT

Technical documents generated under this task order shall be marked with Distribution Limitation Statement D. Word processing files shall have the statements included on the cover page of any resultant hard copy. All technical data gathered under this task order shall carry the following Distribution Limitation Statement and handling caveat:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE DEPARTMENT OF

DEFENSE AND US DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE,

(DATE). OTHER U.S. REQUESTS FOR THIS DOCUMENT MUST BE REFERRED TO

COMMANDING OFFICER, NAVAL SURFACE WARFARE CENTER, 110 VERNON AVENUE,

PANAMA CITY, FLORIDA 32407-7012.

DESTRUCTION NOTICE - FOR CLASSIFIED DOCUMENTS, FOLLOW PROCEDURES IN DOD

5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL,

CHAPTER 5, SECTION 7 OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM

REGULATION. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD

THAT WILL PREVENT DISCLOSURE OF CONTENTS OF RECONSTRUCTION OF THE

DOCUMENT.