ITEMIZED PRICING Q0204.xlsx
XLSX spreadsheet 15 KB Posted
- Solicitation number
- N5523623Q0204
About this file
This document contains an independent government cost estimate and statement of work for a federal contract to overhaul the NR-3 low pressure air compressor motor onboard the USS Sterett (DDG-104). The contract will require removing, overhauling, reassembling, shop testing, reinstalling, aligning and adjusting the motor. It will also include draining and disposing of any liquids, as well as preparing and painting the motor. The estimate includes line items for rigging, transportation, labor, machining if needed, and operational testing. The contractor must complete the work between a purchase order start date of September 7th, 2023 and end date of October 6th, 2023, with key milestones for removal, overhaul, delivery and operational testing. The solicitation was issued by the Naval Sea Systems Command for the Department of the Navy.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOLICITATION SF18 - Q0204.pdf | ||
| ITEMIZED PRICING Q0204.xlsx | XLSX spreadsheet | |
| SOLICITATION SF18 - Q0204.pdf | ||
| Screen Shot Tech Manual S6220-EU-MMA-010.pdf | ||
| SOLICITATION SF18 - Q0204.pdf | ||
| TechDocRequestForm.pdf | ||
| RFC Q0204.docx | DOCX document | |
| ITEMIZED PRICING Q0204.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| INDEPENDENT GOVERNMENT ESTIMATE | |||||
| CONTRACT: | PUMP AND MOTOR CONTINGENCY | ||||
| CONTRACTOR: | |||||
| PURCHASE ORDER: | |||||
| SHIP: | USS STERETT (DDG-104) | ||||
| LOCATION: | NAVY REGION SOUTHWEST | ||||
| ITEM NO CLIN | DESCRIPTION | QUANTITY | UNIT | UNIT PRICE | AMOUNT |
| 0001 | COMMERCIAL INDUSTRIAL SERVICES (CIS) PUMPS AND MOTORS CONTRACT IS TO PROVIDE LABOR, RIGGING SERVICES, CRANE, TRANSPORTATION, EQUIPMENT, AND MATERIALS FOR THE REMOVAL, OVERHAUL, REASSEMBLY, SHOP TEST, RE-INSTALLATION, ALIGNMENT AND ADJUSTMENTS OF THE NR-3 LOW PRESSURE AIR COMPRESSOR MOTOR ONBOARD THE USS STERETT (DDG-104). | 1 | LOT | $0.00 | |
| PROVIDE LABOR, SERVICES, EQUIPMENT, AND MATERIALS TO MECHANICALLY AND ELECTRICALLY DISCONNECT AND REMOVE THE EXISTING NR-3 LOW PRESSURE AIR COMPRESSOR MOTOR UNIT FROM THE FOUNDATION AND ASSOCIATE PIPING. AFTER REPAIR, INSTALL THE REPAIRED MOTOR ONTO FOUNDATION AND CONNECT MECHANICALLY AND ELECTRICALLY IN ACCORDANCE WITH THE STATEMENT OF WORK. | |||||
| ACCOMPLISH THE REPIR OF THE NR-3 LOW PRESSURE AIR COMPRESSOR MOTOR IN ACCORDANCE WITH NAVSEA STANDARD ITEM 009-17 TO INCLUDE THE INSTALLATION OF NEW BEARINGS, REMOVAL AND INSTALLATION, SHAFT BUILD-UP, THERMISTORS, SEALS, O-RINGS, GASKETS, FITTINGS, LOCK WASHERS, LOCKNUTS, FLEXIBLE CONNECTORS, BALANCING, FLEXIBLE CONDUIT AND GROUND STRAPS IN ACCORDANCE WITH THE REQUIREMENTS OF THE CONTRACT AND THE STATEMENT OF WORK. |
(SEE NOTE-1)
| PROVIDE LABOR, SERVICES, EQUIPMENT AND MATERIALS FOR THE RIGGING (REMOVAL AND INSTALL) OF NR-3 LOW PRESSURE AIR COMPRESSOR MOTOR FROM THE FOUNDATION TO THE SHOP FOR REPAIR, AND BACK ONTO THE FOUNDATION AFTER OVERHAUL |
| PROVIDE LABOR, SERVICES, EQUIPMENT AND MATERIALS TO DRAIN AND DISPOSE ANY LIQUID IN SUPPORT OF OVERHAULING THE NR-3 LOW PRESSURE AIR COMPRESSOR MOTOR. |
| PROVIDE LABOR, SERVICES, EQUIPMENT AND MATERIALS FOR THE SHOP TEST AND SHIPBOARD OPERATIONAL TESTING OF THE REPAIRED NR-3 LOW PRESSURE AIR COMPRESSOR MOTOR. |
| PROVIDE LABOR, SERVICES, EQUIPMENT AND MATERIALS FOR THE PREPARATION AND PAINTING OF THE NR-3 LOW PRESSURE AIR COMPRESSOR MOTOR IN ACCORDANCE WITH NAVSEA STANDARD ITEMS 009-32 |
| PROVIDE LABOR (40 HOURS), SERVICES, EQUIPMENT, AND MATERIALS FOR THE MACHINING HOURS (IF REQUIRED) IN ACCORDANCE WITH THE REQUIREMENTS OF THE CONTRACT AND THE STATEMENT OF WORK |
(SEE NOTE 3)
NET AMT $0.00
| MILESTONE EVENT | |
| 1. Purchase Order Start Date | 07-Sep-23 |
| 2. Remove and transport to shop | 07-08-Sep-23 |
| 3. Overhaul and Shop Test | 08-Sep to 04-Oct-23 |
| 4. Delivery to ship and Optest | 04-06-Oct-23 |
| 5. Purchase Order End Date | 06-Oct-23 |
| NOTES: | |
| 1. In the event the requirements stated in the SOW has changed from NAVSEA Standard Item 009-17 to 009-113 as a result of the disassembly inspection, the Contractor shall submit one legible copy, in hard copy or approved transferrable media, of a CFR listing the recommendations of repair requirements to the SBS. The change in scope will require the Contractor to submit a revised estimated cost towards the performance of the new repair recommendation. | |
| 2. Refer to Technical Manual S6220-EU-MMA-010, Technical Manual for Compressor, Air, Low Pressue for detailed procedures on the overhaul of the Lube oil Purfier Motor to include shop and shipboard operational testing. | |
| 3. If machining hours are required, submit CFR to the SUPERVISOR with the result of UNSAT measurement not conforming in accordance with the Technical Manual S6220-EU-MMA-010. |
Sheet2
Sheet3
File details come from the government source that posted it. Updated .