C2 26Q5719 Combined Synopsis Solicitation AMENDMENT 2.pdf
PDF 428 KB Posted
- Attached to
- Shredding Services
- Solicitation number
- N4523A26Q5719
About this file
This is a Combined Synopsis/Solicitation and Request for Quote (RFQ) Amendment 2 for shredding services issued by Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF) in Bremerton, Washington. Solicitation number N4523A26Q5719 seeks Firm Fixed Price Commercial Service contracts for on-site and off-site document shredding services. The acquisition uses simplified procedures for commercial items under FAR Part 12, with no small business set-aside and will be conducted as full and open competition. The NAICS code is 561990 (All Other Support Services) with a small business size standard of $16.5 million, and the PSC code is R614 (Support-Administrative: Paper Shredding).
The contract structure includes a base year (CLIN 0001) covering September 22, 2026 through September 21, 2027, plus four optional one-year extension periods (CLINs 1001-4001), with total performance potentially extending 66 months. Offerors must submit complete CLIN pricing with unit prices (monthly rates) multiplied by 12 months for total proposed prices, supported by documentation such as previous invoices, formal quotes, or comparable contract examples demonstrating price reasonableness. Delivery is FOB Destination with performance at PSNS & IMF. Quotes must be submitted via email by 9:00 AM Pacific Time on September 3, 2026 to Kimberly Neumann and Amanpreet Johal. Questions must be submitted by 9:00 AM Pacific Time on August 28, 2026. Award will be made to the lowest priced, technically acceptable quote based on three evaluation factors: National Association for Information Destruction (NAID) Certification, facility location within 100 miles of PSNS & IMF with NAID-approved destruction processes (incineration, pulping, or landfill milling), and mobile shredding capability meeting specific particle size requirements (5/8 inch wide by 1 3/4 inch long) with vehicles not exceeding 40,000 GVW and minimum $500,000 automotive liability insurance. Past performance will be rated as either Acceptable or Unacceptable based on the offeror's probability of successful performance.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Combined synopsis/solicitation Puget Sound Naval Shipyard and Intermediate Maintenance Facility
(PSNS & IMF)
N4523A26Q5719 Shredding Services
Amendment 2
1. This is a combined synopsis/solicitation for commercial services prepared in accordance with FAR part 12, using Simplified Procedures for Certain Commercial Items found at FAR subpart 12.2, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued.
2. Solicitation number N4523A26Q5719 is issued as a Request for Quote (RFQ) for Shredding Services at PSNS & IMF, located in Bremerton, WA.
3. This acquisition is set-aside for small business concerns will be solicited as full and open competition. No set-aside is proposed. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.
4. The NAICS code has been determined to be 561990, All Other Support Services, with a small business size standard of $16.5M. It has been determined that that appropriate PSC Code for this requirement is R614 Support- Administrative: Paper Shredding.
5. The Government intends to award a Firm Fixed Price Commercial Service type contract. PSNS&IMF intends to utilize this non-personal service contract to obtain Shredding Services.
6. The contract line-item numbers (CLIN) consist of the following: The offeror shall complete the contract line-item number (CLIN) pricing structure in its entirety and return it with all other required documentation, attachments, and data specified in this solicitation. For each CLIN, the offeror must enter a "Unit Price" representing the proposed monthly rate for that contract period. The "Total Proposed Price" shall be calculated by multiplying the proposed "Unit Price" (monthly rate) by 12 months. To demonstrate price reasonableness and realism, the offeror shall provide supporting documentation to substantiate the proposed pricing.
Acceptable forms of substantiation include copies of previous invoices for identical or similar services, a formal quote on company letterhead, a copy of a comparable active or recently completed contract, or similar verifiable commercial data.
7. CLIN 0001: Shredding Services
Shredding Services provided in accordance with the standards and specifications provided in the attached Performance Work Statement (PWS).
Quantity: 12
Unit of measure: Months
Unit Price: $ _____________________
Total Proposed Price for CLIN 0001: $___________________
CLIN 1001 (Option Year One): Shredding Services
Shredding Services provided in accordance with the standards and specifications provided in the attached Performance Work Statement (PWS).
Quantity: 12
Unit of measure: Months
Unit Price: $ _____________________
Total Proposed Price for CLIN 1001: $___________________
CLIN 2001 (Option Year Two): Shredding Services
Shredding Services provided in accordance with the standards and specifications provided in the attached Performance Work Statement (PWS).
Quantity: 12
Unit of measure: Months
Unit Price: $ _____________________
Total Proposed Price for CLIN 2001: $___________________
CLIN 3001 (Option Year Three): Shredding Services
Shredding Services provided in accordance with the standards and specifications provided in the attached Performance Work Statement (PWS).
Quantity: 12
Unit of measure: Months
Unit Price: $ _____________________
Total Proposed Price for CLIN 3001: $___________________
CLIN 4001 (Option Year Four): Shredding Services
Shredding Services provided in accordance with the standards and specifications provided in the attached Performance Work Statement (PWS).
Quantity: 12
Unit of measure: Months
Unit Price: $ _____________________
Total Proposed Price for CLIN 4001: $___________________
8. A full description of all requirements associated with this contract action are provided in a detailed
Performance Work Statement (Attachment 1).
9. Delivery shall be FOB Destination. The delivery location information is provided in the PWS. Unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. Contractor shall include delivery schedule information in their quote. The delivery location information is provided in the Performance Work Statement (PWS).
10. Place of Performance: Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS &
IMF).
11. The Base Year Period of Performance: 01 22 September 2026 through 31 21 September August 2027.
12. Vendors shall ensure the provision at FAR 52.204-7 System for Award Management – Registration are up to date in SAM.gov. To be eligible for award, registration with the System for Award Management (SAM) shall be current at the time of submitting proposals. This requirement is not waived. To register or apply please visit the SAM website at HYPERLINK “http://www.sam.gov/”. If you are not registered, you may request an application at (866) 606-8220 between the hours of 6 am – 8 pm (Eastern Time). The Contracting Officer will verify the Entity’s CAGE code prior to award, so please ensure you include it in your cover letter. Failure to obtain SAM registration will result in submissions not being considered for award.
13. Any additional contract requirement(s) or terms and conditions determined by the Contracting Officer to be necessary for this acquisition and consistent with customary commercial practices are included.
14. Offerors are notified that initial quotes which are incomplete may be eliminated from further consideration for award. The Contractor shall meet all requirements of this Request for Quote.
Award will be made to the quote that is most advantageous to the Government in terms of meeting its requested delivery date and specifications, at the lowest price, in accordance with 52.212-2, Evaluation – Commercial Products and Commercial Services (FEB 2026).
15. Requested quote must be submitted via email to Kimberly Neumann at kimberly.e.neumann.civ@us.navy.mil and Amanpreet Johal at amanpreet.s.johal2.civ@us.navy.mil by 9:00 AM Pacific Time on 07 August 03 September 2026.
16. All questions concerning this solicitation shall be addressed to Kimberly Neumann at kimberly.e.neumann.civ@us.navy.mil and Amanpreet Johal at amanpreet.s.johal2.civ@us.navy.mil by 9:00 AM Pacific Time on 05 August 28 August 2026.
17. Point of Contact for small business questions or assistance is the Puget Sound Naval Shipyard and Intermediate Maintenance Facility is Janique Hudson, janique.a.hudson.civ@us.navy.mil.
18. NOTE: Late offers will be handled in accordance with FAR 52.212-1 (FEB 2026) Instructions to Offerors Commercial Items. No facsimile submissions will be accepted. Proposals are due by 9:00 AM Pacific Time on 07 August 03 September 2026.
19. Offers must provide the following information with their quote:
1. An official quote with the RFQ number (N4523A26Q5719), Company Name and Address, point of contact and Commercial and Government Entity (CAGE) Code of the offeror.
2. A fully completed Contract Line Item Number (CLIN) pricing schedule corresponding to this Combined Synopsis/Solicitation. Pricing shall include all Option CLINs (1001, 2001, 3001, and 4001) in addition to the base period CLIN (0001).
3. A statement confirming the offeror’s full agreement with all terms, conditions, and provisions set forth in this RFQ. Please note: Quotes that take exception to, or attempt to modify, any of the RFQ's terms and conditions may be determined technically unacceptable and excluded from evaluation.
4. Complete documentation addressing all technical factors established under FAR 52.212-2 Evaluation—Commercial Products and Commercial Services as detailed within this Combined Synopsis/Solicitation.
20. The following checked FAR and DFARS clauses are applicable to this purchase by reference and by full text. The full text of the clauses/provisions from the FAR and DFARS can be accessed via the internet using the following web-site addresses:
FAR - https://acquisition.gov/far/index.html and
DFARS -
www.acq.osd.mil/dpap/dars/dfarspgi/current/
21. Method of Payment: DFARS Clause 252.232-7006 (JAN 2023), Wide Area Workflow Payment
Instructions, and incorporating DFARS Clause 252.232-7003 (DEC 2018), Electronic Submission of Payment Requests and Receiving Reports.
Section C - Description/Specifications/Statement of Work
Requirements Shredding Services provided in accordance with the Performance Work Statement.
Additional Regulation or Supplemental Clauses Incorporated by Full Text
C-202-H001 ADDITIONAL DEFINITIONS--BASIC (Oct 2018)
(a) Department means the Department of the Navy.
(b) Commander, Naval Sea Systems Command means the Commander of the Naval Sea Systems Command of the Department of the Navy or his duly appointed successor.
(c) References to The Federal Acquisition Regulation (FAR) All references to the FAR in this contract shall be deemed to also reference the appropriate sections of the Defense FAR Supplement (DFARS), unless clearly indicated otherwise.
(d) National Stock Numbers Whenever the term Federal Item Identification Number and its acronym FIIN or the term Federal Stock Number and its acronym FSN appear in the contract, order or their cited specifications and standards, the terms and acronyms shall be interpreted as National Item Identification Number (NIIN) and National Stock Number (NSN) respectively which shall be defined as follows:
(1) . The number assigned to each approved Item Identification under the National Item Identification Number (NIIN) Federal Cataloging Program. It consists of nine numeric characters, the first two of which are the National Codification Bureau (NCB) Code. The remaining positions consist of a seven digit nonsignificant number.
(2) . The National Stock Number (NSN) for an item of supply consists of the applicable National Stock Number (NSN) four-position Federal Supply Class (FSC) plus the applicable nine-position NIIN assigned to the item of supply.
(Endof Text)
C-204-H001 USE OF NAVY SUPPORT CONTRACTORS FOR OFFICIAL CONTRACT FILES (Oct 2018)
(a) NAVSEA may use a file room management support contractor, hereinafter referred to as "the support contractor", to manage its file room, in which all official contract files, including the official file supporting this procurement, are retained. These official files may contain information that is considered a trade secret, proprietary, business sensitive or otherwise protected pursuant to law or regulation, hereinafter referred to as "protected information". File room management services consist of any of the following: secretarial or clerical support; data entry; document reproduction, scanning, imaging, or destruction; operation, management, or maintenance of paper-based or electronic mail rooms, file rooms, or libraries; and supervision in connection with functions listed herein.
(b) The cognizant Contracting Officer will ensure that any NAVSEA contract under which these file room management services are acquired will contain a requirement that:
(1) The support contractor not disclose any information;
(2) Individual employees are to be instructed by the support contractor regarding the sensitivity of the official contract files;
(3) The support contractor performing these services be barred from providing any other supplies and/or services, or competing to do so, to NAVSEA for the period of performance of its contract and for an additional three years thereafter unless otherwise provided by law or regulation; and,
(4) In addition to any other rights the contractor may have, it is a third party beneficiary who has the right of direct action against the support contractor, or any person to whom the support contractor has released or disclosed protected information, for the unauthorized duplication, release, or disclosure of such protected information.
(c) Execution of this contract by the contractor is considered consent to NAVSEA's permitting access to any information, irrespective of restrictive markings or the nature of the information submitted, by its file room management support contractor for the limited purpose of executing its file room support contract responsibilities.
N4523A26Q57190002
(d) NAVSEA may, without further notice, enter into contracts with other contractors for these services. Contractors should enter into separate non-disclosure agreements with the file room contractor. Contact the Procuring Contracting Officer for contractor specifics. However, any such agreement will not be considered a prerequisite before information submitted is stored in the file room or otherwise encumber the government.
(End of Text)
C-211-H018 APPROVAL BY THE GOVERNMENT (NAVSEA) (JAN 2019) (Jan 2019)
Approval by the Government as required under this contract and applicable specifications shall not relieve the Contractor of its obligation to comply with the specifications and with all other requirements of the contract, nor shall it impose upon the Government any liability it would not have had in the absence of such approval.
(End of Text)
C-242-H002 POST AWARD MEETING (NAVSEA) (OCT 2018) (Oct 2018)
(a) A post-award meeting with the successful offeror will be conducted within [ * ] days after award of the [contract / task order]. The meeting will be held at the address below:
Location/Address: via teleconference
(b) The contractor will be given [ ] working days notice prior to the date of the meeting by the Contracting Officer.2
(c) The requirement for a post-award meeting shall in no event constitute grounds for excusable delay by the contractor in performance of any provisions in the [contract / task order].
(d) The post-award meeting will include, but is not limited to, the establishment of work level points of contact, determining the administration strategy, roles and responsibilities, and ensure prompt payment and close out. Specific topics shall be mutually agreed to prior to the meeting.
(End of Text)
Section D - Packaging and Marking
Additional Regulation or Supplemental Clauses Incorporated by Full Text
D-211-H002 MARKING OF REPORTS (NAVSEA) (OCT 2018) (Oct 2018)
All reports delivered by the Contractor to the Government under this contract shall prominently show on the cover of the report:
(1) name and business address of the Contractor
(2) contract number
(3) sponsor:
(Name of Individual Sponsor)
(Name of Requiring Activity)
(City and State)
(End of Text)
Section G - Contract Administration Data
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.201-7000 Contracting Officer's Representative. Dec 1991 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018
DFARS Clauses Incorporated by Full Text
252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) As used in this clause- Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.
authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) To access WAWF, the Contractor shall- WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.
Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.
Protocol.
(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.
WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the following document type(s): Document type.
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items-
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
Invoice 2in1
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]
(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.
when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC N50082
Issue By DoDAAC N4523A
Admin DoDAAC N4523A
Inspect By DoDAAC N4523A
Ship To Code N4523A
Ship From Code ____
Mark For Code ____
Service Approver (DoDAAC) ____
Service Acceptor (DoDAAC) N4523A
Accept at Other DoDAAC ____
LPO DoDAAC N4523A
DCAA Auditor DoDAAC ____
Other DoDAAC(s) ____
(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.
accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.
(g) WAWF point of contact.
WAWF email notifications. The Contractor shall enter the email addresses identified below in the "Send Additional Email Notifications" field of WAWF once a document has been submitted in the system.
Inspector/Acceptor: To be identified at award
Contract Specialist: Kimberly Neumann kimberly.e.neumann.civ@us.navy.milEmail:
Contracting Officer: Amanpreet Johal
Email: amanpreet.s.johal2.civ@us.navy.mil
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
askaccountspayable@us.navy.mil
To ensure prompt payment and accountability, the Contractor shall input the following Agency Accounting ID (AAI) in the Line-Item Information field of WAWF Receiving Reports and Invoices.
AAI: 050120
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
Additional Regulation or Supplemental Clauses Incorporated by Full Text
G-232-H002 H002 PAYMENT INSTRUCTIONS (NAVSEA) (FEB 2024) (Feb 2024)
Payment office allocation methods can be found in the table at DFARS PGI 204.7108(b)(2) (https://www.acq.osd.mil/dpap /dars/pgi/pgi_htm/current/PGI204_71.htm#payment_instructions).
(End of text)
G-232-H005 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (JAN
2019)
(Jan 2019)
(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the sub line item number (SLIN) or CLIN level, rather than at the total contract/TO level, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost break down of other direct costs (ODCs), materials, and travel, by technical instruction (TI), SLIN, or CLIN level. For other than firm fixed price subcontracts, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer and Contracting Officer Representative (COR). Shouldthe subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the Contracting Officer and COR; or other method as agreed to by the Contracting Officer.
(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and Contracting Officer on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and Contracting Officer email notification as required herein.
(End of Text)
G-242-H001 GOVERNMENT CONTRACTADMINISTRATION POINTS-OF-CONTACT AND
RESPONSIBILITIES (NAVSEA) (OCT 2023)
(Oct 2023)
(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.
(b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.
(c) The points of contact are as follows:
(i) The Procuring Contracting Officer (PCO) is:
Name: Amanpreet Johal Address:
1400 Farragut Avenue, Mail Stop 2026 Bremerton, WA 98314-2026 Phone: (360) 517-5562 E-mail: amanpreet.s.johal2.civ@us.navy.mil
(ii) The Contract Specialist is:
Name: Kimberly Neumann Address:
1400 Farragut Avenue, Mail Stop 2026 Bremerton, WA 98314-2026 Phone: (360) 746-9868 E-mail: kimberly.e.neumann.civ@us.navy.mil
(d) The Contracting Officer's Representative (COR) is the contracting officer's appointed representative for technical matters. The COR is not a contracting officer and does not have the authority to direct the accomplishment of effort which is beyond the scope of the contract or to otherwise change any contract requirements. An informational copy of the COR appointment letter, which provides a delineation of COR authority and responsibilities, will be provided upon award of this contract.
The Contracting Officer's Representative (COR) is:
Name: TBD at award Address:
TBD at award Phone: TBD at award E-mail: TBD at award
(e) The Contractor's point of contact for performance under this contract is:
Name: TBD at award Address:
TBD at award Phone: TBD at award E-mail: TBD at award
(End of Text)
Section H - Special Contract Requirements
Additional Regulation or Supplemental Clauses Incorporated by Full Text
H-209-H003 REQUIRED DISCLOSURE OF ORGANIZATIONAL CONFLICT OF INTEREST
(NAVSEA) (NOV 2022)
(Nov 2022)
(a) "Organizational Conflict of Interest" means that because of other activities or relationships with other persons, a person is unable or potentially unable to render impartial assistance or advice to the Government, or the person's objectivity in performing the contract work is or might be otherwise impaired, or a person has an unfair competitive advantage. "Person" as used herein includes Corporations, Partnerships, Joint Ventures, and other business enterprises.
(b) The Contractor warrants that to the best of its knowledge and belief, and except as otherwise set forth in the contract, at the time of execution of this contract the Contractor does not have any organizational conflict of interest(s) as defined in paragraph (a).
(c) The Contractor agrees that, if after award, it discovers an actual or potential organizational conflict of interest, it shall make immediate and full disclosure in writing to the Contracting Officer. The notification shall include a description of the actual or potential organizational conflict of interest, a description of the action which the Contractor has taken or proposes to take to avoid, mitigate, or neutralize the conflict, and any other relevant information that would assist the Contracting Officer in making a determination on this matter. Notwithstanding this notification, the Government may terminate the contract for the convenience of the Government if determined to be in the best interest of the Government.
(d) Notwithstanding paragraph (c) above, if the Contractor was aware, or should have been aware, of an organizational conflict of interest prior to the award of this contract or becomes, or should become, aware of an organizational conflict of interest after award of this contract and does not make an immediate and full disclosure in writing to the Contracting Officer, the Government may terminate this contract for default.
(e) If the Contractor fails to take action required by this requirement, or required by the Contracting Officer upon receipt of the Contractor's disclosure required by paragraph (c), the Government may terminate this contract for default.
(f) The Contracting Officer's decision as to the existence or nonexistence of an actual or potential organizational conflict of interest shall be final.
(g) The Contractor shall promptly notify the Contracting Officer, in writing, if it has been tasked to evaluate or advise the Government concerning its own products or activities, those of its subcontractors, those of one of its prime contractors (to which the contractor is a subcontractor), or those of a competitor in order to ensure proper safeguards exist to guarantee objectivity and to protect the Government's interest.
(h) The Contractor shall include this requirement in subcontracts of any tier which involve access to information or situations/conditions covered by the preceding paragraphs, substituting "subcontractor" for "contractor" where appropriate.
(i) The rights and remedies described herein shall not be exclusive and are in addition to other rights and remedies provided by law or elsewhere included in this contract.
(j) Compliance with this requirement is a material requirement of this contract.
(End of Text)
Section I - Contract Clauses
FAR Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
52.203-6 Restrictions on Subcontractor Sales to the Government. Jun 2020
52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.
Jan 2017
52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards.
(Deviation 2026-O0038)
Feb 2026
52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026
52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded.
(Deviation 2026-O0038)
Feb 2026
52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026-O0038)
Feb 2026
52.212-4 Terms and Conditions-Commercial Products and Commercial Services.
(Deviation 2026-O0038)
Feb 2026
52.219-8 Utilization of Small Business Concerns. (Deviation 2026-O0038) Feb 2026 52.222-3 Convict Labor. (Deviation 2026-O0038) Feb 2026 52.222-35 Equal Opportunity for Veterans. (Deviation 2026-O0038) Feb 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-37 Employment Reports on Veterans. (Deviation 2026-O0038) Feb 2026
52.222-40 Notification of Employee Rights Under the National Labor Relations Act.
(Deviation 2026-O0038)
Feb 2026
52.222-41 Service Contract Labor Standards. (Deviation 2026-O0038) Feb 2026
52.222-43 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts). (Deviation 2026-O0038)
Feb 2026
52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.222-54 Employment Eligibility Verification. (Deviation 2026-O0038) Feb 2026 52.222-62 Paid Sick Leave Under Executive Order 13706. (Deviation 2026-O0038) Feb 2026
52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026- O0040, Revision 1)
Apr 2026
52.223-5 Pollution Prevention and Right-to-Know Information. May 2024 52.223-23 Sustainable Products and Services. (DEVIATION 2025-O0004) Feb 2026 Deviation 2025-O0004 Mar 2025 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026
52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-O0038)
Apr 2026
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022
252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.
(DEVIATION 2024-O0013 REVISION 1)
May 2024 Deviation 2024-O0013 May 2024
252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
Jan 2023
252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.
Jun 2023
252.232-7010 Levies on Contract Payments. Dec 2006 252.232-7011 Payments in Support of Emergencies and Contingency Operations. May 2013 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. Jan 2023
252.240-7997 NIST SP 800-171 DoD Assessment Requirements. (DEVIATION 2026- O0025)
Feb 2026 Deviation 2026-O0025 Feb 2026
252.243-7001 Pricing of Contract Modifications. Dec 1991 252.243-7002 Requests for Equitable Adjustment. Dec 2022
Subcontracts for Commercial Products or Commercial Services.
252.244-7999 (DEVIATION 2026-O0015) Feb 2026 Deviation 2026-O0015 Jan 2026 252.247-7023 Transportation of Supplies by Sea. Oct 2024
FAR Clauses Incorporated by Full Text
52.217-8 Option to Extend Services. (Nov 1999)
Option to Extend Services (Nov 1999)
The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 30 days of contract expiration.
(End of clause)
52.217-9 Option to Extend the Term of the Contract. (Mar 2000)
Option to Extend the Term of the Contract (Mar 2000)
(a) The Government may extend the term of this contract by written notice to the Contractor within ; provided that the Government gives the 30 days Contractor a preliminary written notice of its intent to extend at least before the contract expires. The preliminary notice does not commit the 60 days Government to an extension.
(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.
(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 66 months.
(End of clause)
52.219-14 Limitations on Subcontracting. (Deviation 2026-O0038) (Feb 2026)
LIMITATIONS ON SUBCONTRACTING (FEB 2026) (DEVIATION 2026-O0038)
(a) This clause does not apply to the unrestricted portion of a partial set-aside.
(b) , as used in this clause, means a first-tier subcontractor, including an independent contractor, that-Definition. Similarly situated entity
(1) Has the same small business program status as that which qualified the prime contractor for the award ( , for a small business set-aside e.g.
contract, any small business concern, without regard to its socioeconomic status); and
(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.
(c) This clause applies only to-Applicability.
(1) Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);
(2) Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in 19.000(a)(3);
(3) Contracts that have been awarded on a sole-source basis in accordance with sections 19.105, 19.106, 19.107, and 19.108;
(4) Orders expected to exceed the simplified acquisition threshold and that are set aside for small business concerns under multiple-award contracts, as described in 8.4 and 16.5;
(5) Orders, regardless of dollar value, that are set aside in accordance with sections 19.105, 19.106, 19.107, and 19.108 under multiple-award contracts, as described in 8.4 and 16.5; and
(6) Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the evaluation preference.
(d) An independent contractor shall be considered a subcontractor.Independent contractors.
(e) By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract assigned a North American Industry Classification System (NAICS) code for-
(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract;
(2) Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;
(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded; or
(4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 75 percent subcontract amount that cannot be exceeded.
(f) The Contractor shall comply with the limitations on subcontracting as follows:
(1) For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause-
[ ] Contracting Officer check as appropriate.
By the end of the base term of the contract and then by the end of each subsequent option period; or
By the end of the performance period for each order issued under the contract.
(2) For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.
(g) A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants.
(1) In a joint venture comprised of a small business protégé and its mentor approved by the Small Business Administration, the small business protégé shall perform at least 40 percent of the work performed by the joint venture. Work performed by the small business protégé in the joint venture must be more than administrative functions.
(2) In an 8(a) joint venture, the 8(a) participant(s) shall perform at least 40 percent of the work performed by the joint venture. Work performed by the 8(a) participants in the joint venture must be more than administrative functions.
(End of clause)
52.219-28 Postaward Small Business Program Rerepresentation. (Deviation 2026-O0038) (Feb 2026)
Postaward Small Business Program Rerepresentation (Feb 2026) (Deviation 2026-O0038)
(a) . As used in this clause-Definitions
Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.
Small business concern-
(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.
(2) , as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or Affiliates a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.
(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:
(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.
(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.
(3) For long-term contracts-
(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and
(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.
(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.
(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-
(1) Was set aside for small business and has a value above the simplified acquisition threshold;
(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or
(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.
(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.
(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.
(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:
(1) The Contractor represents that it a small business concern under NAICS Code assigned to contract number.[ ] is, [ ] is not ____ ____
(2) [ .] The Contractor represents that Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause it , a small disadvantaged business concern as defined in .[ ] is, [ ] is not 13 CFR 124.1001
(3) . The Contractor represents that it a joint Women-owned small business (WOSB) joint venture eligible under the WOSB Program [ ] is, [ ] is not venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier ____ of each party to the joint venture: __.]
(4) . The Contractor represents that it a joint Economically disadvantaged women-owned small business (EDWOSB) joint venture [ ] is, [ ] is not venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier ____ of each party to the joint venture: __ .]
(5) . The Contractor represents that it Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program [ ] an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The is, [ ] is not ____
Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]
(6) [ ] The offeror HUBZone joint venture eligible under the HUBZone Program. Complete only if the offeror is a HUBZone small business concern.
represents, as part of its offer, that It a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [[ ] is, [ ] is not
The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .] Each HUBZone small business concern ____ participating in the HUBZone joint venture must be certified as a HUBZone concern. [ Contractor to sign and date and insert authorized signer's ____ name and title.]
(End of clause)
52.222-42 Statement of Equivalent Rates for Federal Hires. (May 2014)
Statement of Equivalent Rates for Federal Hires (May 2014)
In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor ( ), this clause identifies 29 CFR Part 4 the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C.5341 or 5332.
This Statement is for Information Only: It is not a Wage Determination
ADDENDUM: Wage Determination No. 2015-5525, Revision 30, Dated 13 May 2026 incorporated into this contract.
(End of clause)
DFARS Clauses Incorporated by Full Text
252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirements.
(Nov 2025)
CONTRACTOR COMPLIANCE WITH THE CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025)
(a) . As used in this clause- Definitions
"Controlled unclassified information" means information the Government creates or possesses, or information an entity creates or possesses for or on behalf of the Government, that a law, regulation, or Governmentwide policy requires or permits an agency to handle using safeguarding or dissemination controls (32 CFR 2002.4(h)).
"Current" means-
(1) With regard to Conditional Cybersecurity Maturity Model Certification (CMMC) Status-
(i) Not older than 180 days for Conditional Level 2 (Self) assessments and Conditional Level 2 (certified third-party assessment organization (C3PAO)) assessments, with-
(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR
170.16 and 170.17); and
(B) A corresponding affirmation of continuous compliance by an affirming official (see 32 CFR 170.4); and
(ii) Not older than 180 days for Conditional Level 3 (Defense Industrial Base Cybersecurity Assessment Center (DIBCAC)) assessments, with-
(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR 170.18); and
(B) A corresponding affirmation of continuous compliance by an affirming official;
(2) With regard to Final CMMC Status-
(i) Not older than 1 year for Final Level 1 (Self), with-
(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.15);
and
(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official;
(ii) Not older than 3 years for Final Level 2 (Self) assessments and Final Level 2 (C3PAO) assessments, with-
(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.16 and 170.17); and
(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official; and
(iii) Not older than 3 years for Final Level 3 (DIBCAC) assessments, with-
(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.18);
and
(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official; and
(3) With regard to affirmation of continuous compliance (32 CFR 170.22), not older than 1 year with no changes in compliance with the requirements at 32 CFR part 170.
"Cybersecurity Maturity Model Certification (CMMC) status" means the result of meeting or exceeding the minimum required score for the corresponding assessment. The potential statuses are as follows:
(1) Final Level 1 (Self).
(2) Conditional Level 2 (Self).
(3) Final Level 2 (Self).
(4) Conditional Level 2 (C3PAO).
(5) Final Level 2 (C3PAO).
(6) Conditional Level 3 (DIBCAC).
(7) Final Level 3 (DIBCAC).
"Cybersecurity Maturity Model Certification unique identifier (CMMC UID)" means 10 alpha-numeric characters assigned to each CMMC assessment and reflected in the Supplier Performance Risk System (SPRS) for each contractor information system.
"Federal contract information (FCI)" means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government. It does not include information provided by the Government to the public, such as on public websites, or simple transactional information, such as information necessary to process payments.
"Plan of action and milestones" means a document that identifies tasks to be accomplished. It details resources required to accomplish the elements of the plan, any milestones in meeting the tasks, and scheduled completion dates for the milestones, as defined in National Institute of Standards and Technology Special Publication 800-115 (32 CFR 170.21).
(b) . The Cybersecurity Maturity Model Certification (CMMC) is a framework for assessing a contractor's compliance with Framework applicable information security protections (see 32 CFR part 170).
(c) . The CMMC…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .