C9 N4523A26Q0004 BRR-6 Gundrilling RFC Responses .pdf

PDF 144 KB Posted

Attached to
Shaft Gun Drilling/Machining Services
Solicitation number
N4523A26Q0004
Issued by

About this file

Written by GovTribe AI ·

This is a Government Response to Request for Clarifications document for federal contract N4523A26Q0009 concerning Shaft Gun Drilling/Machining services.

The document addresses three clarifications submitted by potential contractors. First, it confirms that missing dimensions F and G referenced in the engineering drawing details are available on page 6 of the provided Engineering Memorandum in a table located in the lower right-hand corner. Second, the government clarifies that the scope of work includes both gun drilling and machining operations, not drilling alone, with additional machining details provided in Detail C of Enclosure (2) of the engineering memorandum. Third, the government specifies that the Government-furnished material is ASTM B446 (rod) Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625). These clarifications establish the complete technical requirements and material specifications necessary for contractors to prepare accurate proposals for this shaft drilling and machining requirement.

View the file

Other files

File Type Posted
C9 N4523A26Q0004 Amendment 0002.pdf PDF
C2 N4523A26Q0004 BRR-6 Solicitation Attachment 1 - Performance Work Statement.pdf PDF
C9 N4523A26Q0004 BRR-6B Solicitation 0002.pdf PDF
C9 N4523A26Q0004 Amendment 0001.pdf PDF
C2 N4523A26Q0004 BRR-6 Solicitation Attachment 3 - Request for Clarification Form.pdf PDF
C2 N4523A26Q0004 BRR-6 Solicitation Attachment 4 - Drawings and References Request Form.pdf PDF
C2 N4523A26Q0004 BRR-6 Solicitation.pdf PDF
C2 N4523A26Q0004 BRR-6 Solicitation Attachment 2 - GFP Attachment.pdf PDF
C2 N4523A26Q0004 BRR-6 Solicitation Attachment 1 - Performance Work Statement.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

N4523A26Q0009

Shaft Gun Drilling/Machining

Government Response To Request for Clarifications

1) Question: The drawing appears to be missing two dimensions:

• Dimension F shown in Detail B

• Dimension G shown in Detail D

Answer: Dimensions F and G are available on page 6 of the provided EM, in the table labeled Dimension F and G in the lower right hand corner.

2) Question: The PWS references both gun drilling and machining; however, the drawing appears to provide information only for drilling the through-hole. Please confirm whether the required scope includes:

• Gun drilling of the through-hole only, or

• Gun drilling along with any additional machining operations.

Answer: The requirement is for gun drilling and machining. See detail C of the Enclosure (2) of the engineering memorandum.

3) Question: Please confirm the material specification for the Government-furnished metal bar stock.

Answer: ASTM B446 (rod) Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625).

File details come from the government source that posted it. Updated .