(Attachment 4) C8 WIS_Waste Anaylsis_Redacted.pdf

WASTE INFORMATION SPECIFICATION (WIS) FORM

Naval Base Kitsap (Select One)

[Z] Bangor □ NAVHOSP D Jackson Park D Camp Wesley Harris

1. Originator: 2. Phone#:

3. Email Address: 4. Command / Contractor: 5. Shop/Department/Code:

TRF

6. Name of Waste Produced (Use sos name ifapplicable): 7. Total Waste Quantity:

(# of containers, size of containers, and frequency of generation)

Gamet and various metals from waterjet cutting. 1 Container, 16' x 12' x 3-1/2' Approx. 5,027 Gallons

8. Buildings and room numbers of points of generation: 9. Hazardous Waste Accumulation Area ID #s

NIA

10. Waste Produced is: 11. State of Waste Produced is:

IZ]Process Waste □Empty D Pure Product IZJ Solid D Gas 0Aerosol

D One-time waste D Expired/unused (Exp. Date: ) IZJ Liquid D Debris D Other:

12. Re-submittal - Old Tracking # 13. Other notable characteristics 14. Potential Contaminants:

D Asbestos 0 Metals OOilNone □

Drees D Solvents 0other: Spent Gamet

15. Provide a detailed description on how the waste was produced and what process the waste was used in. Please note any other materials the waste could be contaminated with and any operating procedures that may impact the chemical composition.

Waste is produced from a mixture of abrasive garnet and water combined in a high pressure waterjet to cut metal (Aluminum, Carbon steel, and Stainless steel) for manufacture of various metal shapes.

16. List all materials in the waste (must attach SDS) % of waste

Material/Trade Name SDS No. NSN/Part No. MFG w/ Phone# by weight

Abrasive HPX Gamet 475565 53 50HMCN08415 Barton Mines Company (800) 741 7756 10% 1.)

2.)

Metals (Various) 5%

Water 85% 3.)

4.)

17. Certification: I certify that the above is accurate and true; and this waste has not been mixed with any other materials; will be controlled by me; and will be turned in for disposal as directed on side 2 of this WIS.

02 Dec 2020

Originator's Signature Date

Return this form to:

HW Coordinator Review and Concurrence:

12/2/2020 Initials

IEOUseOnly Date

A-ORIGINATOR INSTRUCTIONS (Labeling, Accumulation, Disposition)

D Dispose as refuse in dumpster

D Discharge in sanitary sewer

D Recycle via Command HW Coordinator per Bangor Recycle Program Instruction

D Attach completed Originator Label and applicable Hazard Class Label(s) - Per Section B

Use Green HW Label for WIS #s that begin with 5, 6, 7, 8 Use BLUE Non-Hazardous Label for WIS #s that begin with 0, 1, 2, 3, 4

� Special Handling Instructions:

Have contracted company pump out hopper and filter box waste water and dispose via permitted facility.

Follow pollution prevention standards to prevent spills from equipment/truck. Retain, and Send to environmental office, bill of lading and any addt'I paperwork from contractor.

B-LABEL INFORMATION

a. WIS#: 01500640

b. Waste Name: Garnet/metal cutting

c. Required Labels: NON-HAZWASTE

C -NBK DISPOSITION

BEO Use Only

D Consolidate and dispose per WIS Profile

D Transport to IWTP. IWTP shall treat per WIS Profile

Turn-in material to MTIS Recycles on base or transport to off-base recycler Special Handling Instructions:

D -BEO CERTIFICATION

Signature PRB41 Date

Hazard Class:

12/2/2020

For assistance call your Command HW Coordinator This WIS certification expires five years after the above signature date or when the waste described by the

Copy to: Originator, Command HW Coordinator originator does not match the waste created.

WIS SIDE 2 -TO BE COMPLETED BY BEO

NAVBASEKITSAP 5090.3E

TE

C

H N

IC

A

L D

A

TA

MINERAL COMPOSIT ION

Garnet Almandine, Pyrope & Grossular .. 92–96%

Other Minerals Magnetite, Hornblende, Feldspar, Mica, Other ....................................... 4–8%

CHEMICAL COMPOSIT ION

Almandine ......................................... Fe3Al2(SiO4)3

Pyrope ................................................ Mg3Al2(SiO4)3

P H YS I C A L P R O P E R T I E S

Specific Gravity ................................ 3.9–4.1 g/cm3

Hardness (Mohs) ............................. 7.5—8.5

Strength ............................................. Friable to tough

Particle Shape .................................. Sharp, angular, irregular

Color ................................................... Red to pink

Crystallization Cubic (isometric) system as rhombic dodecahedrons or tetragonal trisoctahedrons (trapezohedrons) or in combinations of the two.

OTHER CHARACTERISTICS

Conductivity ...................................... <290 ms/cm

Radioactivity ...................................... Diffuse NORM

Moisture Absorption ....................... Non-hydroscopic

Chlorides ............................................ <25 ppm

Free Crystalline Silica ..................... <1%

Respirable Free Quartz .................. <0.1%

Melting Point ..................................... .1,315° C

Reactivity ........................................... Inert

Magnetism ......................................... Slightly magnetic (Volume susceptibility = 9.999375)

Electrostatic Properties Mineral conductivity—18,000 volts Non-reversible

Technical Data & Physical Characteristics

ADIRONDACK® HPX® Garnet Abrasives

Garnet is a natural product; therefore, its chemical analysis will vary.

2019-06