SF 1449 - N4215825QS050.pdf
PDF 2 MB Posted
- Attached to
- Phenix Motor Test Sets Calibration Federal contract opportunity
- Solicitation number
- N4215825QS050
About this file
This Standard Form 1449 (SF 1449) is a solicitation/contract for calibration services for Phenix Motor Test Sets at Norfolk Naval Shipyard. The contract (N4215825QS050) is a Women-Owned Small Business (WOSB) set-aside for a firm fixed-price procurement under commercial items procedures. The base period is from 05 May 2025 to 04 May 2026, with four optional one-year extensions through 04 May 2030, covering calibration of three specific motor test sets with serial numbers 04-2451/MTS100RX, 04-2450/MTS100RX, and 03-1994/MTS1000R-400. The work will be performed in Building 510, 1st Floor Motor Section at Norfolk Naval Shipyard in Portsmouth, VA, with Code 950 (Electrical Group) providing test rotors and potentially an escort if required. The solicitation indicates a sole source procurement to Doble Engineering Company, the only vendor authorized to calibrate these specific motor test sets.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
WOMEN-OWNED SMALL
BUSINESS (WOSB)
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES
1. REQUISITION NUMBER PAGE 1 OF
2. CONTRACT NUMBER 3. AWARD/EFFECTIVE
DATE
4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE
DATE
7. FOR SOLICITATION
INFORMATION CALL:
a. NAME b. TELEPHONE NUMBER (No collect calls)
8. OFFER DUE DATE/
LOCAL TIME
9. ISSUED BY
13b. RATING
14. METHOD OF SOLICITATION
CODE
15. DELIVER TO 16. ADMINISTERED BY CODE
18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/
OFFEROR
CODE
FACILITY
CODE
CODE
TELEPHONE NUMBER
17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN
OFFER
18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK
BELOW IS CHECKED
REQUEST
FOR QUOTE
(RFQ)
INVITATION
FOR BID
(IFB)
REQUEST
FOR
PROPOSAL
(RFP)
SEE ADDENDUM
19.
ITEM NUMBER
20.
SCHEDULE OF SUPPLIES/SERVICES
21.
QUANTITY
22.
UNIT
23.
UNIT PRICE
24.
AMOUNT
(Use Reverse and/or Attach Additional Sheets as Necessary)
25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)
28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN
COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH
AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND
ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS
SPECIFIED
29. AWARD OF CONTRACT: REFERENCE OFFER
DATED . . YOUR OFFER ON SOLICITATION
(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE
SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
30a. SIGNATURE OF OFFEROR/CONTRACTOR
30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED
31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)
31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED
AUTHORIZED FOR LOCAL REPRODUCTION
PREVIOUS EDITION IS NOT USABLE
STANDARD FORM 1449 (REV. 11/2021)
Prescribed by GSA - FAR (48 CFR) 53.212
10. THIS ACQUISITION IS UNRESTRICTED OR
NORTH AMERICAN
INDUSTRY CLASSIFICATION
STANDARD (NAICS):
SIZE STANDARD:
13a. THIS CONTRACT IS A
RATED ORDER UNDER
THE DEFENSE PRIORITIES
AND ALLOCATIONS
SYSTEM - DPAS (15 CFR 700)
SET ASIDE: % FOR:
11. DELIVERY FOR FREE ON
BOARD (FOB) DESTINATION
UNLESS BLOCK IS MARKED
SEE SCHEDULE
12. DISCOUNT TERMS
ARE ARE NOT ATTACHED
ARE ARE NOT ATTACHED
27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3
AND 52.212-5 ARE ATTACHED. ADDENDA
27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA
8(A)
ECONOMICALLY
DISADVANTAGED
WOMEN-OWNED SMALL
BUSINESS (EDWOSB)
SERVICE-DISABLED
VETERAN-OWNED
SMALL BUSINESS
(SDVOSB)
HUBZONE SMALL
BUSINESS
SMALL BUSINESS
NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.
Section A - Solicitation/Contract Form
CALIBRATE PHENIX MOTOR TEST SETS
N4215825QS050
Section B - Supplies or Services & Prices or Costs
Additional Information/Notes
Item Supplies/Service Quantity Unit Unit Price Amount
Calibration of Phenix Motor Test Sets IAW Statement of Work contained herein
S/N: 04-2451/MTS100RX
04-2450/MTS100RX
03-1994/MTS1000R-400
Location: Norfolk Naval Shipyard (NNSY) Bldg 510 1st Floor (Motor Section) Portsmouth, VA 23709
Pricing Arrangement: Firm Fixed Price PR Number: From Additional Reference Information PR Line Item Number: 0001
1 Job
Option Line Item
Calibration of Phenix Motor Test Sets IAW Statement of Work contained herein
S/N: 04-2451/MTS100RX
04-2450/MTS100RX
03-1994/MTS1000R-400
Location: Norfolk Naval Shipyard (NNSY) Bldg 510 1st Floor (Motor Section) Portsmouth, VA 23709
Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 1001
1 Job
Option Line Item
Calibration of Phenix Motor Test Sets IAW Statement of Work contained herein
S/N: 04-2451/MTS100RX
04-2450/MTS100RX
03-1994/MTS1000R-400
Location: Norfolk Naval Shipyard (NNSY) Bldg 510 1st Floor (Motor Section) Portsmouth, VA 23709
Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 2001
1 Job
Option Line Item
Calibration of Phenix Motor Test Sets IAW Statement of Work contained herein
S/N: 04-2451/MTS100RX
04-2450/MTS100RX
03-1994/MTS1000R-400
Location: Norfolk Naval Shipyard (NNSY) Bldg 510 1st Floor (Motor Section) 1 Job
Portsmouth, VA 23709
Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 3001
Option Line Item
Calibration of Phenix Motor Test Sets IAW Statement of Work contained herein
S/N: 04-2451/MTS100RX
04-2450/MTS100RX
03-1994/MTS1000R-400
Location: Norfolk Naval Shipyard (NNSY) Bldg 510 1st Floor (Motor Section) Portsmouth, VA 23709
Pricing Arrangement: Firm Fixed Price PR Number: NOPR PR Line Item Number: 4001
1 Job
Section C - Description/Specifications/Statement of Work
Section A: Scope
Objective:
Contractor to perform calibration contract for 2025(base year), plus the option for a total of 4-year extension.
Contractor to calibrate the following American Hoffman Balance Machines: MTS100R-400- S/N 03-1994, , MTS100-RX S/N 04-2450 MTS100-RX- 04-2451
Background/Introduction
C950 performs motor overhaul and repair work in the Motor Section on the 1st floor of building 510 at Norfolk Naval Shipyard (NNSY). The Motor Test Sets play an integral part in the overhaul and repair process.
Section B: Applicable Documents
Documentation: N/A
Section C: Requirements
Scope of Work:
Contractor to provide Maintenance Service Agreement contract for 2025 (base year), plus the option for a total four (4) one (1) year extensions. Contractor to provide the calibration of the American Hoffman Balance Machines.
Contractor Responsibilities:
Contractor shall provide the following:
a. Calibration of the machines
- Base year 2025, plus the option for a total of four (4) extension years
- MTS100R-400- S/N 03-1994
- MTS100-RX S/N 04-2450
- MTS100-RX- 04-2451
NNSY Responsibilities:
NNSY shall provide an escort if required.
Code 950 shall provide the test rotors
Government Furnished Property:
Safety:
"Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements OSHE OSHECM Chapter Hazardous Energy Control (HEC) requirements or safety requirements for site specific location of the contract.
Contractors and Non-NNSY Government Agencies (NNGAs) are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard (NNSY) cognizance must adhere to Federal OSHA requirements for hazardous energy control IAW 29 CFR 1915.89 and must follow Hazardous Energy Control (HEC) procedures as identified in NAVSEA's Occupational Safety, Health, and Environment Corporate Manual (OSHECM) Chapter 250 (latest revision), when performing work under NNSY contract. All HEC work to be performed by Contractors and NNGAs requires that NNSY Technical Points of Contact (TPOCs) and/or Contracting Officer's Representatives (CORs) be notified of the HEC scope of work prior to starting work. Any changes or deviations in the initial scope of HEC work requires the NNSY TPOCs and/or CORs be informed of the change/deviation. Appendix 250.B-1 through B-3 of OSHECM Chapter 250 for multiple employer work identifies when Contractors and NNGAs are required to assign their Lockout/Tags-Plus Coordinator (LOTC) to coordinate HEC work with the cognizant NNSY LOTC. HEC locks shall be provided by the contractor or NNGA for their employees use. The HEC locks shall have red bodies with name labels or name tags affixed, identifying who installed the HEC lock(s) and a point of contact telephone number. HEC lock name labels and tags must be made of materials that will hold up to the environment to which they are exposed. HEC tags used for Tags-Plus HEC work shall be provided by the cognizant NNSY LOTC to the contractor or NNGA for their use if machinery, equipment, or systems (MES) cannot be locked out. OSHECM Chapter 250 Tags-Plus procedures will be strictly followed.
Contractors and NNGAs may obtain electronic copies of OSHECM Chapter 250 (latest revision) and access the OSHA 1915.89 web site by using the following link to NNSY's public access web site:
http://www.navsea.navy.mil/shipyards/norfolk/default.aspx.
Names and contact information for NNSY LOTCs and/or the Building Monitor will be provided by NNSY TPOC and/or Contracting Officer Representative set forth elsewhere in this award document."
Place of Performance/Delivery Location:
Norfolk Naval Shipyard, Building 510, 1st Floor Motor Section
Period of Performance (PoP)/ Completion Date/ Delivery Date:
See Schedule
Defense Biometric Identification Systems and NAVSEA Badging:
All contractors, with the exception of permanent party (or "seated" contractors with Common Access Cards (CACs), will be required to obtain a DBIDS card to gain access to NNSY.
Procedure for receiving a DBIDS card:
- Contractor will complete the SECNAV 5512 form(s) and forward them to their NNSY Sponsor /Contracting Officer's Representative (COR).
- The sponsor will complete the CVS spreadsheet utilizing the information on the completed SECNAV5512 forms and forward all documents to Commander Navy region Mid-Atlantic (CNRMA) for vetting.
- CNRMA will add the contractor to the "179-Day List" which is utilized by the Pass and ID office to create the DBIDS card.
- Once on the 179-Day List, the contractor may go to Pass and ID to have their DBIDS card generated.
- Green NAVSEA access badges can be generated at this point with contractors providing proof of U.S. Citizenship (Birth Certificate/ US Passport).
Portable Electronic Devices:
"In accordance with COMSUBLANT/COMSUBPACINST 2075.1C, the use of Portable Electronic Devices (PEDs) while in or on Department of Navy Submarine spaces are prohibited. A portable electronic device
(PED) is defined as any non-stationary electronic apparatus with singular or multiple capabilities of, but not limited to recording, storing, and/or transmitting data, voice, video, or photo images (e.g., cell phones, laptops, tablets and wearable devices such as fitness bands and smart watches)."
Authorization of Additional Work:
Any additional work outside the scope of this contract/purchase order shall have written authorization from the Contracting Officer prior to executing any additional work. Any work performed without the written authorization of the Contracting Officer shall be considered "At-Risk" and the government will have no legal obligation to pay for the work performed.
Section D: Contact Information
Technical POC
TBD
Invoice Certifier:
TBD
JML POC
TBD
Requirements CALIBRATE PHENIX MOTOR TEST SETS for Organization 950 - Electrical Group FY: 2025, AMS:
N42158-25-SIMACQ-NNSY-950-0010
Additional Regulation or Supplemental Clauses Incorporated by Full Text
C-202-H001 ADDITIONAL DEFINITIONS--BASIC (Oct 2018)
(a) Department means the Department of the Navy.
(b) Commander, Naval Sea Systems Command means the Commander of the Naval Sea Systems Command of the Department of the Navy or his duly appointed successor.
(c) References to The Federal Acquisition Regulation (FAR) All references to the FAR in this contract shall be deemed to also reference the appropriate sections of the Defense FAR Supplement (DFARS), unless clearly indicated otherwise.
(d) National Stock Numbers Whenever the term Federal Item Identification Number and its acronym FIIN or the term Federal Stock Number and its acronym FSN appear in the contract, order or their cited specifications and standards, the terms and acronyms shall be interpreted as National Item Identification Number (NIIN) and National Stock Number (NSN) respectively which shall be defined as follows:
(1) . The number assigned to each approved Item Identification under the National Item Identification Number (NIIN) Federal Cataloging Program. It consists of nine numeric characters, the first two of which are the National Codification Bureau (NCB) Code. The remaining positions consist of a seven digit nonsignificant number.
(2) . The National Stock Number (NSN) for an item of supply consists of the applicable National Stock Number (NSN) four-position Federal Supply Class (FSC) plus the applicable nine-position NIIN assigned to the item of supply.
(Endof Text)
C-211-H018 APPROVAL BY THE GOVERNMENT (NAVSEA) (JAN 2019) (Jan 2019)
Approval by the Government as required under this contract and applicable specifications shall not relieve the Contractor of its obligation to comply with the specifications and with all other requirements of the contract, nor shall it impose upon the Government any liability it would not have had in the absence of such approval.
(End of Text)
C-223-W002 ON-SITE SAFETY REQUIREMENTS (NAVSEA) (OCT 2018) (Oct 2018)
(a) The contractor shall ensure that each contractor employee reads any necessary safety documents within 30 days of commencing performance at any Government facility. Required safety documents can be obtained from the respective safety office. Contractors shall notify the Safety office points of contact below to report completion of the required training via email. The email shall include the contractor employee's name, work site, and contract number.
(b) It is expected that contractor employees will have received training from their employer on hazards associated with the areas in which they will be working and know what to do in order to protect themselves. Contractors are required to adhere to the requirements of 29 CFR 1910, 29 CFR 1926 and applicable state and local requirements while in Government spaces. The contractor shall ensure that all on-site contractor work at the Government facility is in accordance with any local safety instructions as provided via the COR. The contractor shall report all work-related injuries/illnesses that occurred while working at the Government site to the COR.
(c) Contractors whose employees perform work within Government spaces in excess of 1000 hours per calendar quarter during a calendar year shall submit the data elements on OSHA Form 300A, Summary of Work Related Injuries and Illnesses, for those employees to the safety office via the COR by 15 January for the previous calendar year, even if no work related injuries or , illnesses occurred. If a contractor's injury/illness rates are above the Bureau of Labor Statistics industry standards, a safety assessment may be performed by the Safety Office to determine if any administrative or engineering controls can be utilized to prevent further injuries/illnesses, or if any additional Personal Protective Equipment or training will be required.
(d) Any contractor employee exhibiting unsafe behavior may be removed from the Government site. Such removal shall not relieve the contractor from meeting its contractual obligations and shall not be considered an excusable delay as defined in FAR 52.249-14.
(e) The Safety Office points of contacts are as follows:
__________________________ [insert name and code]
(End of Text)
Section D - Packaging and Marking
Section E - Inspection and Acceptance
Overall Contract Inspection/Acceptance Locations
Acceptance Location
Acceptance Destination Instructions: TBD
DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Inspection Location
Inspection Destination Instructions: TBD
DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Option Line Item
Acceptance Location
Acceptance Destination Instructions: TBD
DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Inspection Location
Inspection Destination Instructions: TBD
DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Option Line Item
Acceptance Location
Acceptance Destination Instructions: TBD
DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Inspection Location
Inspection Destination Instructions: TBD
DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Option Line Item
Acceptance Location
Acceptance Destination Instructions: TBD
DoDAAC: N42158 CountryCode: USA
Inspection Location
Inspection Destination Instructions: TBD
DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Option Line Item
Acceptance Location
Acceptance Destination Instructions: TBD
DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Inspection Location
Inspection Destination Instructions: TBD
DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Section F - Deliveries or Performance
Contractor Destination
Line Item Delivery Schedule Quantity Address and POC
Period of Performance From 05 May 2025 To 04 May 2026
1 Job Place of Performance DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Option Line Item
Period of Performance From 05 May 2026 To 04 May 2027
1 Job Place of Performance DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Option Line Item
Period of Performance From 05 May 2027 To 04 May 2028
1 Job Place of Performance DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
1 Job Place of Performance DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
Option Line Item
Period of Performance From 05 May 2028 To 04 May 2029
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
Option Line Item
Period of Performance From 05 May 2029 To 04 May 2030
1 Job Place of Performance DoDAAC: N42158 CountryCode: USA
NORFOLK NAVAL SHIPYARD GF
1 NORFOLK NAVAL SHIPYARD, BUILDING 276
PORTSMOUTH, VA 23709-1001
UNITED STATES
TBD, TBD
Telephone: TBD
FAR Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
52.247-34 F.o.b. Destination. Nov 1991
Section G - Contract Administration Data
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018
DFARS Clauses Incorporated by Full Text
252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) As used in this clause- Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.
authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) To access WAWF, the Contractor shall- WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.
Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.
Protocol.
(f) The Contractor shall use the following information when submitting payment requests and receiving reports WAWF payment instructions.
in WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the following document type(s): Document type.
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items-
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
Invoice 2in1
(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]
(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in Document routing.
WAWF when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC N68732
Issue By DoDAAC N42158
Admin DoDAAC N42158
Inspect By DoDAAC N42158
Ship To Code N42158
Ship From Code ____
Mark For Code N4215825PSXXX
Service Approver (DoDAAC) N42158
Service Acceptor (DoDAAC) N42158
Accept at Other DoDAAC ____
LPO DoDAAC N42158
DCAA Auditor DoDAAC ____
Other DoDAAC(s) 056521
(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")
(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.
accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
Jennifer Perry; jennifer.n.perry18.civ@us.navy.mil; (757)-396-2636; Bilikis Bramlett; bilikis.d.bramlett.civ@us.navy.mil; (757)-396-4416
(Contracting Officer: Insert applicable information or "Not applicable.")
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
Additional Regulation or Supplemental Clauses Incorporated by Full Text
G-232-H005 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (JAN
2019)
(Jan 2019)
(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the sub line item number (SLIN) or CLIN level, rather than at the total contract/TO level, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost break down of other direct costs (ODCs), materials, and travel, by technical instruction (TI), SLIN, or CLIN level. For other than firm fixed price subcontracts, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer and Contracting Officer Representative (COR). Shouldthe subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the Contracting Officer and COR; or other method as agreed to by the Contracting Officer.
(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and Contracting Officer on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and Contracting Officer email notification as required herein.
(End of Text)
G-232-H002 H002 PAYMENT INSTRUCTIONS (NAVSEA) (FEB 2024) (Feb 2024)
Payment office allocation methods can be found in the table at DFARS PGI 204.7108(b)(2) (https://www.acq.osd.mil/dpap /dars/pgi/pgi_htm/current/PGI204_71.htm#payment_instructions).
(End of text)
G-242-H001 GOVERNMENT CONTRACTADMINISTRATION POINTS-OF-CONTACT AND
RESPONSIBILITIES (NAVSEA) (OCT 2023)
(Oct 2023)
(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.
(b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.
(c) The points of contact are as follows:
(i) The Procuring Contracting Officer (PCO) is:
Name: [ * ] Address:
[ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]
(ii) The Contract Specialist is:
Name: [ * ] Address:
[ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]
(iii) The Administrative Contracting Officer (ACO)is:
Name: [ * ] Address:
[ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]
(d) The Contracting Officer's Representative (COR) is the contracting officer's appointed representative for technical matters. The COR is not a contracting officer and does not have the authority to direct the accomplishment of effort which is beyond the scope of the contract or to otherwise change any contract requirements. An informational copy of the COR appointment letter, which provides a delineation of COR authority and responsibilities, will be provided upon award of this contract.
The Contracting Officer's Representative (COR) is:
Name: [ * ] Address:
[ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]
(e) The Alternate Contracting Officer's Representative (ACOR) is responsible for COR responsibilities and functions in the event that the COR is unavailable due to leave, illness, or other official business. The ACOR is appointed by the contracting officer; a copy of the ACOR appointment will be provided upon award of this contract.
The Alternate Contracting Officer's Representative (ACOR) is:
Name: [ * ] Address:
[ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]
(f) The Technical Point of Contact (TPOC) is the contracting officer's representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.
The Technical Point of Contact (TPOC) is:
Name: [ * ] Address: [ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]
(g) The Alternate Technical Point of Contact (ATPOC) is responsible for TPOC responsibilities and functions in the event that the TPOC is unavailable due to leave, illness, or other official business.
The Alternate Technical Point of Contact (ATPOC) is:
Name: [ * ] Address:
[ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]
(h) The Authorized Ordering Person(s) for Per-Call Maintenance is responsible for issuing and maintaining records for any per-call orders for remedial maintenance placed under this contract. No per-call order shall be placed outside the scope of this contract and the cumulative total of all orders shall not be in excess of any not-to-exceed amount specified in the contract. Per-call orders shall not, in any way, modify any terms and conditions of the contract.
(i) The Authorized Ordering Person(s) for Per-Call Maintenance is:
Name: [ * ] Address:
[ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx];
E-mail: [ * ]
(j) The Contractor's point of contact for performance under this contract is:
Name: [ * ] Address:
[ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]
[ * ] To be completed at contract award
(End of Text)
G-242-H002 HOURS OF OPERATION AND HOLIDAY SCHEDULE (NAVSEA) (JUL 2021) (Jul 2021)
(a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods. Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by the [insert activity name]. All goods or services attempted to be delivered on a Saturday, Sunday or Holiday without specific instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at the contractor's expense with no cost or liability to the U.
S. Government.
(b) The federal Government observes public Holidays that have been established under 5 U.S.C. 6103. The actual date of observance for each of the holidays, for a specific calendar year, may be obtained from the OPM website at OPM.GOV or by using the following direct link: https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/.
(c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent
N4215825QS050
https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/ https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.
(d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy. Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company's established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures.
(e) If you intend to visit the Contracts Office, it is advised that you call for an appointment at least 24 hours in advance.
(f) The hours of operation are as follows:
AREA FROM TO
[ ] [ ]insert specific Departments insert times
(g) All deliveries to the Receiving Officer, [ Negotiator insert delivery location],shall be made Monday through Friday from [ ] to [ ], local time. Deliveries will not be accepted after Negotiator enter beginning hour of operation Negotiator enter closing hour of operation
[ ]. No deliveries will be accepted on federal government holidays.Negotiator enter closing hour of operation
(End of Text)
Section H - Special Contract Requirements
Section I - Contract Clauses
FAR Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
52.204-9 Personal Identity Verification of Contractor Personnel. Jan 2011 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.204-21 Basic Safeguarding of Covered Contractor Information Systems. Nov 2021 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. Nov 2015 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.237-2 Protection of Government Buildings, Equipment, and Vegetation. Apr 1984
DFARS Clauses Incorporated by Reference
Number Title Effective Date
Alternate/ Deviation
Variation Effective Date
252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7003 Control of Government Personnel Work Product. Apr 1992 252.204-7004 Antiterrorism Awareness Training for Contractors. Jan 2023 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023
252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
Jan 2023
252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023 252.204-7023 Reporting Requirements for Contracted Services. Jul 2021
252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.
Sep 2014
252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7048 Export-Controlled Items. Jun 2013
252.225-7972 Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems. (DEVIATION 2024-O0014)
Aug 2024 Deviation 2024-O0014 Aug 2024
252.232-7010 Levies on Contract Payments. Dec 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. Jan 2023 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024
FAR Clauses Incorporated by Full Text
52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders- Commercial Products and Commercial Services.
(Jan 2025)
CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS-COMMERCIAL
PRODUCTS AND COMMERCIAL SERVICES (JAN 2025)
(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:
(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title (JAN 2017) VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).
(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC (Section 1634 of Pub. L. 115-91).2023)
(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section (NOV 2021) 889(a)(1)(A) of Pub. L. 115-232).
(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(NOV 2015)
(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(MAR 2023)
(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(AUG 1996)
(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).(OCT 2004)
(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:
[ .]Contracting Officer check as appropriate
52.203-6, Restrictions on Subcontractor Sales to the Government with (41 U.S.C. 4704 and 10 U.S.C. (1) (JUN 2020), Alternate I (NOV 2021) 4655).
52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).(2) (NOV 2021)
52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. 111-(3) (JUN 2010) 5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)
52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, (4) (NOV 2023) the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).
52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31 U.S.C. 6101 note).(5) (JUN 2020)
[Reserved].(6)
52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).(7) (OCT 2016)
52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. C).(8) (OCT 2016)
52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(9) (JUN 2023)
52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and (10) Multi-Agency Contracts. (Pub. L. 115-390, title II).(DEC 2023)
(11)
52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(i) (DEC 2023)
Alternate I of 52.204-30.(ii) (DEC 2023)
(12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. ( 2025) (31 U.S.C. 6101 note).JAN
52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41 U.S.C. 2313).(13) (OCT 2018)
[Reserved].(14)
52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).(15) OCT 2022
52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ( ) (if the offeror elects to waive the (16) OCT 2022 preference, it shall so indicate in its offer) (15 U.S.C. 657a).
[Reserved](17)
(18)
52.219-6, Notice of Total Small Business Set-Aside (15 U.S.C. 644).(i) (NOV 2020)
Alternate I of 52.219-6.(ii) (MAR 2020)
(19)
52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(i) (NOV 2020)
Alternate I of 52.219-7.(ii) (MAR 2020)
52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)).(20) ( )JAN 2025
(21)
52.219-9, Small Business Subcontracting Plan (15 U.S.C. 637(d)(4)).(i) ( )JAN 2025
Alternate I of 52.219-9.(ii) (NOV 2016)
Alternate II of 52.219-9.(iii) (NOV 2016)
Alternate III of 52.219-9.(iv) (JUN 2020)
Alternate IV of 52.219-9.(v) ( )JAN 2025
(22)
52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(i) (MAR 2020)
Alternate I of 52.219-13.(ii) (MAR 2020)
52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 657s).(23) OCT 2022
52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(24) (SEP 2021)
52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns (25) Eligible Under the SDVOSB Program ( ) (15 U.S.C. 657f).FEB 2024
(26)
52.219-28, Small Business Program Rerepresentation (15 U.S.C. 632(a)(2)).(i) Postaward ( )JAN 2025
Alternate I of 52.219-28.(ii) (MAR 2020)
52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns ((27) OCT ) (15 U.S.C. 637(m)).2022
52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned (28) Small Business Program ( ) (15 U.S.C. 637(m)).OCT 2022
52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).(29) (MAR 2020)
52.219-33, Nonmanufacturer Rule (15 U.S.C. 637(a)(17)).(30) (SEP 2021)
52.222-3, Convict Labor (E.O.11755).(31) (JUN 2003)
(32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126).(JAN 2025)
52.222-21, Prohibition of Segregated Facilities .(33) (APR 2015)
(34)
52.222-26, Equal Opportunity (E.O.11246).(i) (SEP 2016)
Alternate I of 52.222-26.(ii) (FEB 1999)
(35)
52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(i) (JUN 2020)
Alternate I of 52.222-35.(ii) (JUL 2014)
(36)
52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(i) (JUN 2020)
Alternate I of 52.222-36.(ii) (JUL 2014)
52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).(37) JUN 2020
52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).(38) (DEC 2010)
(39)
52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627).(i) (NOV 2021)
Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(ii) (MAR 2015)
(40) 52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not applicable to the acquisition of commercially (JAN 2025) available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)
(41)
52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not (i) applicable to the acquisition of commercially available off-the-shelf items.)
Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf (ii) (MAY 2008) items.)
52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (42 U.S.C. 7671, ).(42) (MAY 2024) et seq.
52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (42 U.S.C. 7671, (43) (MAY 2024) et seq.
52.223-20, Aerosols (42 U.S.C. 7671, ).(44) (MAY 2024) et seq.
52.223-21, Foams (42 U.S.C. 7671, ).(45) (MAY 2024) et seq.
52.223-23, Sustainable Products and Services (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. (46) (MAY 2024) 7671l).
(47)
52.224-3 Privacy Training (5 U.S.C. 552 a).(i) (JAN 2017)
Alternate I of 52.224-3.(ii) (JAN 2017)
(48)
52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(i) (OCT 2022)
Alternate I of 52.225-1.(ii) (OCT 2022)
(49)
52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, (i) (NOV 2023)
19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.
Alternate I [Reserved].(ii)
Alternate II of 52.225-3.(iii) (JAN 2025)
Alternate III of 52.225-3.(iv) (FEB 2024)
Alternate IV (Oct 2022) of 52.225-3.(v)
52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).(50) (NOV 2023) et seq
52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign (51) (FEB 2021) Assets Control of the Department of the Treasury).
52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the (52) National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).
52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).(53)
52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (42 U.S.C. 5150).(54) (NOV 2007)
52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).(55) (MAY 2024)
52.229-12, Tax on Certain Foreign Procurements .(56) (FEB 2021)
52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. (57) (NOV 2021) 3805).
52.232-30, Installment Payments for Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).(58) (NOV 2021)
52.232-33, Payment by Electronic Funds Transfer-System for Award Management (31 U.S.C. 3332).(59) (OCT2018)
52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).(60)
52.232-36, Payment by Third Party (31 U.S.C. 3332).(61) (MAY 2014)
52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a).(62) (AUG 1996)
52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign (63) Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(NOV 2024)
52.242-5, Payments to Small Business Subcontractors (15 U.S.C. 637(d)(13)).(64) (JAN 2017)
(65)
52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631).(i) (NOV 2021)
Alternate I of 52.247-64.(ii) (APR 2003)
Alternate II of 52.247-64.(iii) (NOV 2021)
(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:
[ ]Contracting Officer check as appropriate.
52.222-41, Service Contract Labor Standards (41 U.S.C. chapter67).(1) (AUG 2018)
52.222-42, Statement of Equivalent Rates for Federal Hires (29 U.S.C. 206 and 41 U.S.C. chapter 67).(2) (MAY 2014)
52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (3) (AUG (29 U.S.C. 206 and 41 U.S.C. chapter 67).2018)
52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.(4) C. chapter 67).
52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of (5) Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).
52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (6) (MAY 2014) (41 U.S.C. chapter 67).
52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(7) (JAN 2022)
52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(8) (JAN 2022)
52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).(9)
52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (49 U.S.C. (10) (JAN 2025) 40118(g)).
(d) . The Contractor shall comply with the provisions of this paragraph (d) if this contract was Comptroller General Examination of Record awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.
(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.
(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7,…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .