REVISED_SOW.pdf

N4215818TN029

Statement of Work

1. Scope:

1.1 Title: Inland Spud barge rental

1.2 Location of work - Adjacent to wharf area at caisson end of dry dock #3.

2. EQUIPMENT REQUIREMENTS:

2.1 RANGE OF 120’-130’ long X 45’-50’ wide X 7’-9’ deep inland spud barge. Can accept a 45’ wide barge with no other exceptions allowed.

2.2 Barge must be equipped with a minimum of 2 each, deep water spuds for anchorage.

2.3 Spuds will be manually maneuvered using NNSY supplied cranes and riggings.

2.4 Spuds required must be of sufficient length to be used in 40’ feet of water with a mud bottom.

2.5 Barge to be equipped with a minimum size 10” double barrel bitt at all four corners and a minimum of 4 each, 36” kevels [2 per side] along the length.

2.6 Spud barge must be of sound construction and meet any Federal, US Coast Guard and state of Virginia requirements for vessels used in Virginia waterways that may apply.

2.7 Contractor shall post the Emergency POC, phone number, contract number, and project specific assignment on equipment.

2.8 Deck of barge to be free of any and all debris, from prior usage, before delivery to NNSY.

2.9 NNSY reserves the right to inspect and refuse offered barges during the performance period

2.10 Must be able to support a 4WD diesel telescoping boom lift (aerial work platform, i.e. JLG) on barge

2.11 With option to extend up to 6 months per FAR 52.217-8.

3. Period of Performance

3.1 DEC 15 2017 thru SEP 30 2018

4. Points Of Contact:

4.1 Technical POC: TBA UPON AWARD

4.2 Invoice Certifying POC: TBA UPON AWARD

5. Safety/Security Requirements:

5.1 "Per FAR 22.102-1(a) entitled "Safety", Contractors are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard cognizance must follow Federal and State OSHA requirements OSHE

OSHECM Chapter Hazardous Energy Control (HEC) requirements or safety requirements for site specific location of the contract.

a. Contractors and Non-NNSY Government Agencies (NNGAs) are hereby informed that their employees or representatives present on property under Norfolk Naval Shipyard (NNSY) cognizance must adhere to Federal OSHA requirements for hazardous energy control IAW 29 CFR 1915.89 and must follow Hazardous Energy Control (HEC) procedures as identified in NAVSEA’s Occupational Safety, Health, and Environment Corporate Manual (OSHECM)

Chapter 250 (latest revision), when performing work under NNSY contract. All HEC work to be performed by

Contractors and NNGAs requires that NNSY Technical Points of Contact (TPOCs) and/or Contracting Officer’s

Representatives (CORs) be notified of the HEC scope of work prior to starting work. Any changes or deviations in the initial scope of HEC work requires the NNSY TPOCs and/or CORs be informed of the change/deviation. Appendix

250.B-1 through B-3 of OSHECM Chapter 250 for multiple employer work identifies when Contractors and NNGAs are required to assign their Lockout/Tags-Plus Coordinator (LOTC) to coordinate HEC work with the cognizant NNSY

LOTC. HEC locks shall be provided by the contractor or NNGA for their employees use. The HEC locks shall have red bodies with name labels or name tags affixed, identifying who installed the HEC lock(s) and a point of contact telephone number. HEC lock name labels and tags must be made of materials that will hold up to the environment to which they are exposed. HEC tags used for Tags-Plus HEC work shall be provided by the cognizant NNSY LOTC to the contractor or NNGA for their use if machinery, equipment, or systems (MES) cannot be locked out. OSHECM

Chapter 250 Tags-Plus procedures will be strictly followed.

b. Contractors and NNGAs may obtain electronic copies of OSHECM Chapter 250 (latest revision) and access the OSHA

1915.89 web site by using the following link to NNSY’s public access web site:

http://www.navsea.navy.mil/shipyards/norfolk/default.aspx

c. Names and contact information for NNSY LOTCs and/or the Building Monitor will be provided by NNSY TPOC and/or CORs set forth elsewhere in this award document.

N4215818TN029

This announcement will close at on 13 December 2017 at 03:00 PM EDT.

This requirement will be prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures for commercial items found at FAR subpart 13.5, as supplemented with the additional information included in this notice.

Accordingly, a Simplified Streamlined acquisition process will be used in the evaluation and award of the contract.

52.212-1 INSTRUCTIONS TO OFFERORS –COMMERCIAL ITEMS (FEB 2012) ADDENDUM

Quotations shall be emailed to Mrs. Alicia Thomas (E-mail: Alicia.N.Thomas@navy.mil)

Questions relating to this notice shall be submitted in writing via the above e-mail address.

Quotations will consist of the following documents submitted together in Adobe Acrobat .pdf format:

1. Completed FAR 52.212-3 representations and certifications unless otherwise completed in SAM;

2. Price for each line item being quoted in accordance with the Solicitation and Schedule

2.1 Pricing rate list breaking down price per day, week, and month.

3. Technical statement submission (Completion of Technical Certification Form)

Award will be made for the technically acceptable item or combination of technically acceptable items that result in the lowest aggregate price to the Government.

Price:

The estimated amount for each line item will be added together to determine the total estimated price which will become the evaluate price.

The vendor’s proposed price will be evaluated on the basis of price reasonableness. All prices must be considered fair and reasonable as determined by the Government. Price quote shall be held firm for sixty (60) days.

The completion and submission of the above items will constitute a quote and will be considered the vendor’s unconditional assent to the terms and conditions of this solicitation and any attachments and/or exhibits.

Failure to provide all of these documents by the required date and time may preclude a quotation from award consideration at the discretion of the Government.

Quotations are valid for 60 days.

Price: The vendor’s proposed price will be evaluated on the basis of price reasonableness. All prices must be considered fair and reasonable as determined by the Government.

The completion and submission of the above items will constitute a quote and will be considered the vendor’s unconditional assent to the terms and conditions of this solicitation and any attachments and/or exhibits.

52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting

Officer may exercise the option by written notice to the Contractor within at least one (1) calendar day prior to the expiration of the contract.

(End Clause)