Attachment_1_Technical_Capabilities_Certification_REVISED.pdf

Attachment (1)

ATTACHMENT 1

TECHNICAL CAPABILITY CERTIFICATIONS

Vendor shall self-certify that the equipment and services proposed either meets or does not meet the Government’s minimum requirements specified in the associated Statement of Work (SOW) reference by initialing in the “YES” or

“NO” area of the chart below.

Any deviation to the Government specifications shall be identified as such – A detailed explanation shall be provided for each negative response.

Note: In order to be considered for award, the table must be completed in its entirety and submitted with your quotation in accordance with the Instructions of Offerors.

In order to be considered technically acceptable, this form must be completed in its entirety.

Vendor shall certify that his product meets or does not meet each specification listed above by initialing in the applicable YES or NO box beside each specification. _____________ (initials)

Technical Capabilities Statement

Item #1 Specifications for Rental of a Spud Barge

Shall be provided with the following capabilities, features, and specifications: YES NO

RANGE AS FOLLWS:

120’-130’ long X 45-50’ wide X 7-9’ deep inland spud barge. (Indicate Barge dimensions here:_______________________________)

Equipped with a minimum of 2 each, deep water spuds for anchorage.

Spuds must be of sufficient length to be used in 40’ feet of water with a mud bottom. (Indicate dimensions here:_______________________________)

Minimum size 10” double barrel bitt at all four corners and a minimum of 4 each, 36” kevels [2 per side] along the length. (Indicate dimensions here:_______________________________)

Spud barge of sound construction and meet any Federal, US Coast Guard and state of Virginia requirements for vessels used in Virginia waterways that may apply.

Deck of barge to be free of any and all debris, from prior usage be able to support a 4WD diesel telescoping boom lift (aerial work platform, i.e.

JLG) on barge