Attachment_1-_Technical_Capability_Certifications_N4215818QN004.pdf

SOLICITATION N42158-18-Q-N004 ATTACHMENT (1)

TECHNICAL CAPABILITY CERTIFICATIONS

Vendor shall self-certify that the equipment and services proposed either meets or does not meet the Government’s minimum requirements specified in the associated Statement Of Work (SOW) reference by initialing in the “YES” or “NO” area of the chart below. .

Any deviation to the Government specifications shall identified as such -

A detailed explanation shall be provided for each negative response.

Note: In order to be considered for award, the table must be completed in its entirety and submitted with your quotation in accordance with the Instructions of Offerors.

Technical Capabilities for CFM 1250 Air Compressor Oil-Free (Diesel) with Air Dryer

YES NO

CFM 1250 (or greater) Air Compressor Oil-Free (Diesel) with Air Dryer Unit Diesel Oil-Free Air Compressor with Air Dryers ≥ 1250 CFM (30 mᶾ/min) or greater.

Pressure rated at ≥ 100 psig (7 bar) Pressure range 80 psig (5.5 bar) – 125 psig (9 bar).

Diesel driven.

Forklift pockets and four point certified lift frame.

Rigging sketch provided.

Lifting and Rigging conforms to NAVFAC-P-307 Standards.

Gross weight stenciled on four sides.

Has pad eyes for crane movement or forklift slots.

Air Dryers shall be provided with the compressor with the following capabilities, features, and specifications.

Air inlet and air outlet connectors are 3” Boss.

Provides -40 degrees Fahrenheit or -100 degrees Fahrenheit dew point.

Particulate pre-filler and oil removal filter with automatic drain and pressure differential gauge for filters.

One Micron after filter with pressure differential gauge.

All equipment and filters mounted on unit.

Forklift pockets and four point certified lift frame.

Rigging sketch provided.

Lifting and Rigging conforms to NAVFAC-P-307 Standards.

Gross weight stenciled on four sides.

I, _______________________________________, hereby certify the equipment/services proposed meet or exceed all Government Minimum Specifications.

I, _____________________________________, hereby certify the equipment/services proposed meet or exceed the

Government Minimum Specifications with the following deviations/exceptions:

(Provide separately detailed explanation for each SOW association)