N40442-10-R-1005 AMEND 0005.doc

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SECTION B - SUPPLIES OR SERVICES AND PRICES

The following have been added by full text:

SUMMARY OF CHANGES

1. The purpose of this amendment is to add the following NEW work items AS PER ATTACHED; also add work items to the index.

WORK ITEM NO. 110

PIPE CHASE MAIN DECK STRUCTUAL STEEL REPLACEMENT (VR10-013)

WORK ITEM NO. 111

MAIN HOUSE WINDOW FRAME REPAIRS AND PRESERVATION (VR-10-071)

WORK ITEM NO. 113

06 LEVEL FAN ROOM PRESERVATION (VRR10-067)

WORK ITEM NO. 114

MISC STEEL REPAIRS (CAT B ITEM)

WORK ITEM NO. 405

AFT FATHOMETER INSTALLATION

WORK ITEM NO. 509

NO. 3 LUBE OIL PURIFIER HEAT EXCHANGER CLEANING (VR10-036)

WORK ITEM NO.510

01 LEVEL SEWAGE PIPING REPAIRS (VR10-019)

WORK ITEM NO. 511

HOT AND COLD POTABLE WATER SHUT OFF VALVE REPLACEMENT (VR 09-033)

WORK ITEM NO. 609

PORT RESCUE BOAT DAVIT MAINTENANCE AND REPAIR (USCG, VR10-026)

2. Below are responses to contractor request for clarification:

SPECIFICATION ITEM NO.:

PARA. NO.

3.1

TITLE:

10 Stbd Cargo Tank Preservation

QUESTION:

Paragraph lists square footage as 21,000 sq ft for the 10 starboard cargo tank. Same cargo tank on previous Solicitations listed 56,000 sq ft. Please confirm square footage for this tank.

ANSWER:

The Tank sq footage listed is correct.

SPECIFICATION ITEM NO.: 501

PARA. NO. 2.2.1 MSC LANT Standard Item No. 84

TITLE: GAUGE/THERMOMETER CALIBRATION

QUESTION:

Referenced Standard item includes paragraphs regarding the RPM indicating system, pitch indicating system, and degaussing system, which are not covered in the basic item.

Please confirm the Standard item paragraphs mentioned are not applicable for this Yukon availability.

ANSWER:

1. The Spec takes priority.

SPECIFICATION ITEM NO.: 501

PARA. NO. 7.4.2

TITLE: GAUGE/THERMOMETER CALIBRATION

QUESTION:

Specification paragraph says to replace all gages listed in the enclosure, but the enclosure says all are to be calibrated.

Please confirm whether existing gauges are to be calibrated in place, or replaced with new.

ANSWER:

Change 7.4.2 to read Calibrate vice Replace all gages listed in the enclosure.

SPECIFICATION ITEM NO.:906

PARA. NO. 2.1

TITLE: Sea Valve Repair & Inspection

QUESTION:

Paragraph 2.1 refers to NAVSEA DRAWING NO. 505-6241614-B, “List of Sea Valves”. The valve list is incomplete. Only certain parts of thedrawing were scanned. Please provide the portion of the drawing that describes the valve specifications (ie: material, pressure rating, trim, etc.)

ANSWER:

1. Use attached NAVSEA Dwg: 505-6581207 vice 505-6241614 listed in the spec.

3. Add the following to Work Item No. 913, paragraph 4.3.1.

Suggested Sources:

Wartsila Lips, Inc.

3617 Koppens Way

Chesapeake, VA 23323

POC: Mr. Gary Hauerwas

Tel.: (757) 558-3625

Fax: (757) 558-3627

Email: gary.hauerwas@wlc.wartsila.com

Coastal Seal Services, LLC

1749 Jessica Ann Road

Lincolnton, NC 28092-5604

Tel: (630) 267-7431

Email: silverbronco76@aol.com EACH OFEROR MUST ACKNOWLEDGE RECEIPT OF THIS AMENDMENT ON PAGE 1 (SF33) OF ITS OFFER, AND MUST INDICATE THAT THE OFFER IS BASED ON RFP NO. N40442-10-R-1005 AND AMENDMENT NOS. 0001, 0002, 0003, 0004, and 0005.

(End of Summary of Changes)