ELINS_0200000-4__N4008519R9035.xlsx
XLSX spreadsheet 70 KB Posted
- Solicitation number
- N4008519R9035
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amend0001_-_N4008519R9035.pdf | ||
| N4008519R9035_RFP.pdf | ||
| 1700000_FAP_N4008519R9035.doc | DOC document | |
| N4008519R9035_Pre_Sol_Notice_N4008519R9035.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SUMMARY SHEET
Contract Summery Sheet
| BASE YEAR | $ - 0 |
| OPTION ONE | $ - 0 |
| OPTION TWO | $ - 0 |
| OPTION THREE | $ - 0 |
| OPTION FOUR | $ - 0 |
CONTRACT TOTAL COST $ - 0
Contract No. N40085-14-D-8114, Rebuild Hydraulic Cylinders, Hampton Roads Region, Southeastern, Virginia
&P
NON-RECURRING ELIN -Base Year
ATTACHMENT J-0200000-04
EXHIBIT LINE ITEM NUMBERS
SOLICITATION/CONTRACT #N40085-12-R-4522 Regional Hydraulic Cylinder Rebuild / Repair
EXHIBIT A - CLIN 9000
Line Item 0001 Base Period -Non-Recurring Work
PROVIDE UNIT PRICES FOR NON-RECURRING WORK
IN ACCORDANCE WITH SECTION C. SPEC ITEM 4
ELINS A700 through A716
ELIN/
freda.reilly: Catalog No.
Contains the line item number (CLIN/SLIN/ELIN).
freda.reilly: Product Name
Contains a short description of the line item. This text box cannot exceed 120 characters.
freda.reilly: Description Extended
Contains an extended description of the product or service the Contractor is to perform, including any applicable response and completion times. When a Shopper is in DOD EMALL - this additional information can be accessed by clicking on the "Product Name" in the Catalog. The Product Detail screen will open providing more details about the product or service such as Unit of Issue, Contract Number, Contractor (Supplier), Catalog Number/CLIN, etc. This text box cannot exceed 2048 characters.
Estimated freda.reilly: Estimated Quantity
Contains estimated quantities to be used for the contract period as seen in all ELIN Schedules when the Contractor submits their bid/proposal. Estimated Quantities are not shown in contract catalogs in DOD EMALL. The Estimated Quantity column is shown here for Bidding/Proposal purposes only. DELETE this column after award prior to submitting Catalog for upload to DOD EMALL.
NOTE: DELETE this column after award and prior to submitting Catalog for upload to DOD EMALL.
Unit of freda.reilly: Unit of Issue
Indicates the Unit of Issue for each product or service, such as square feet (SF). Unit of Issue must conform to DOD EMALL's available Units of Measure (UOMs).
NOTE: See EXCEL Tab below labeled - "NAVFAC UOMs"for complete listing. For example: Vertical Linear Feet (V/LF) is not on the list of acceptable UOMs. Resolution: In the "Description Extended" column state that the "LF" Unit of Issue represents "Vertical Linear Feet".
Unit freda.reilly: Unit Price
Contains the unit price per Unit of Issue. This field is limited to a maximum of 16 digits, with up to four decimal places.
NOTE: DELETE Special Note to Bidder/Offerors after award and prior to submitting Catalog for upload to DOD EMALL.
Extended freda.reilly: Extended Price
Contains total price for each ELIN (Estimated Quantity x Price x Unit Price = Extended Price). Extended Prices are not seen on DOD EMALL in our Catalogs. DELETE this column after award prior to submitting for upload to DOD EMALL. The Extended Price column is shown here for Bidding/Proposal purposes only.
| Catalog No. | Product Name | Description Extended | Quantity | Issue | Price | Price | |
| A700 | Service call for the repair of a hydraulic cylinder. Outside Barrel Diameter three (3) inches or less. The Contractors limit of liability shall be two (2) hours of labor and $100.00 in material / subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 250 | EA | $ - 0 | $ - 0 | |
| A701 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than three (3) inches and up to five (5) inches. The Contractors limit of liability shall be two (2) hours of labor and $150.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 350 | EA | $ - 0 | $ - 0 | |
| A702 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than five (5) inches and up to seven (7) inches. The Contractors limit of liability shall be three (3) hours of labor and $200.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 200 | EA | $ - 0 | $ - 0 | |
| A703 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than seven (7) inches and up to eight (8) inches. The Contractors limit of liability shall be three (3) hours of labor and $250.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 100 | EA | $ - 0 | $ - 0 | |
| A704 | Service call for the break down and cost estimate of a hydraulic cylinder repair. Outside Barrel diameter more than eight (8) inches and up. The Contractors limit of liability shall be three (3) hours of labor and $0.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. The KTR shall provide the Government with a detailed cost estimate of all work that is required to return the cylinder to OEM condition. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 50 | EA | $ - 0 | $ - 0 | |
| A705 | Fabricate hydraulic hoses under 1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 2000 | LF | $ - 0 | $ - 0 | |
| A706 | Fabricate hydraulic hoses 1/2" to 1" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1500 | LF | $ - 0 | $ - 0 | |
| A707 | Fabricate hydraulic hoses over 1" to 1-1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1000 | LF | $ - 0 | $ - 0 | |
| A708 | Fabricate hydraulic hoses over 1-1/2" to 2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 2000 | LF | $ - 0 | $ - 0 | |
| A709 | Fabricate hydraulic hoses over 2" to 2-1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1000 | LF | $ - 0 | $ - 0 | |
| A710 | Fabricate hydraulic hoses under 1/2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1000 | LF | $ - 0 | $ - 0 | |
| A711 | Fabricate hydraulic hoses 1/2" to 1" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 700 | LF | $ - 0 | $ - 0 | |
| A712 | Fabricate hydraulic hoses over 1" to 1-1/2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 300 | LF | $ - 0 | $ - 0 | |
| A713 | Fabricate hydraulic hoses over 1-1/2" to 2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 250 | LF | $ - 0 | $ - 0 | |
| A714 | Fabricate hydraulic hoses over 2" to 2-1/2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 250 | LF | $ - 0 | $ - 0 | |
| A715 | Unit Priced Labor Work - MUST BE NEGOTIATED BY KO. | Provide fully burdened labor rate to perform all Unit Priced Labor work subject to the Service Contract Act per the scope and delivery schedule specified in each task order. This is to provide work related to cylinder repair not covered by perpriced line items. MUST BE NEGOTIATED BY KO. | |||||
| 1800 | HR | $ - 0 | $ - 0 | ||||
| A716 | MATERIALS | ||||||
| MUST BE NEGOTIATED BY KO | This Line item is for the cost for materials that will be required in conjunction with hourly line items in acordance with J- 1700000-1. $10,000 shall be the estimated cost of materials for bidding. Response and completion will be determined by delivery of associated line items. MUST BE NEGOTIATED BY KO. | 1 | LS | $10,000.00 | $10,000.00 | ||
| Total Base Year | $ - 0 |
Contract No. N40085-14-D-8114, Rebuild Hydraulic Cylinders, Hampton Roads Region, Southeastern, Virginia
&P
NON-RECURRING ELIN -Option One
ATTACHMENT J-0200000-04
EXHIBIT LINE ITEM NUMBERS
SOLICITATION/CONTRACT #N40085-12-R-4522 Regional Hydraulic Cylinder Rebuild / Repair
EXHIBIT A - CLIN 9000
Line Item 0002 Option One - Non-Recurring Work
PROVIDE UNIT PRICES FOR NON-RECURRING WORK
IN ACCORDANCE WITH SECTION C. SPEC ITEM 4
ELINS A700 through A716
ELIN/
freda.reilly: Catalog No.
Contains the line item number (CLIN/SLIN/ELIN).
Contains an extended description of the product or service the Contractor is to perform, including any applicable response and completion times. When a Shopper is in DOD EMALL - this additional information can be accessed by clicking on the "Product Name" in the Catalog. The Product Detail screen will open providing more details about the product or service such as Unit of Issue, Contract Number, Contractor (Supplier), Catalog Number/CLIN, etc. This text box cannot exceed 2048 characters.
Estimated
Contains estimated quantities to be used for the contract period as seen in all ELIN Schedules when the Contractor submits their bid/proposal. Estimated Quantities are not shown in contract catalogs in DOD EMALL. The Estimated Quantity column is shown here for Bidding/Proposal purposes only. DELETE this column after award prior to submitting Catalog for upload to DOD EMALL.
Unit of freda.reilly: Unit of Issue
Indicates the Unit of Issue for each product or service, such as square feet (SF). Unit of Issue must conform to DOD EMALL's available Units of Measure (UOMs).
NOTE: See EXCEL Tab below labeled - "NAVFAC UOMs"for complete listing. For example: Vertical Linear Feet (V/LF) is not on the list of acceptable UOMs. Resolution: In the "Description Extended" column state that the "LF" Unit of Issue represents "Vertical Linear Feet".
Unit
Contains the unit price per Unit of Issue. This field is limited to a maximum of 16 digits, with up to four decimal places.
NOTE: DELETE Special Note to Bidder/Offerors after award and prior to submitting Catalog for upload to DOD EMALL.
Extended
Contains total price for each ELIN (Estimated Quantity x Price x Unit Price = Extended Price). Extended Prices are not seen on DOD EMALL in our Catalogs. DELETE this column after award prior to submitting for upload to DOD EMALL. The Extended Price column is shown here for Bidding/Proposal purposes only.
| Catalog No. | Product Name | Description Extended | Quantity | Issue | Price | Price | |
| B700 | Service call for the repair of a hydraulic cylinder. Outside Barrel Diameter three (3) inches or less. The Contractors limit of liability shall be two (2) hours of labor and $100.00 in material / subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 250 | EA | $ - 0 | $ - 0 | |
| B701 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than three (3) inches and up to five (5) inches. The Contractors limit of liability shall be two (2) hours of labor and $150.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 350 | EA | $ - 0 | $ - 0 | |
| B702 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than five (5) inches and up to seven (7) inches. The Contractors limit of liability shall be three (3) hours of labor and $200.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 200 | EA | $ - 0 | $ - 0 | |
| B703 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than seven (7) inches and up to eight (8) inches. The Contractors limit of liability shall be three (3) hours of labor and $250.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 100 | EA | $ - 0 | $ - 0 | |
| B704 | Service call for the break down and cost estimate of a hydraulic cylinder repair. Outside Barrel diameter more than eight (8) inches and up. The Contractors limit of liability shall be three (3) hours of labor and $0.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. The KTR shall provide the Government with a detailed cost estimate of all work that is required to return the cylinder to OEM condition. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 50 | EA | $ - 0 | $ - 0 | |
| B705 | Fabricate hydraulic hoses under 1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 2000 | LF | $ - 0 | $ - 0 | |
| B706 | Fabricate hydraulic hoses 1/2" to 1" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1500 | LF | $ - 0 | $ - 0 | |
| B707 | Fabricate hydraulic hoses over 1" to 1-1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1000 | LF | $ - 0 | $ - 0 | |
| B708 | Fabricate hydraulic hoses over 1-1/2" to 2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 2000 | LF | $ - 0 | $ - 0 | |
| B709 | Fabricate hydraulic hoses over 2" to 2-1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1000 | LF | $ - 0 | $ - 0 | |
| B710 | Fabricate hydraulic hoses under 1/2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1000 | LF | $ - 0 | $ - 0 | |
| B711 | Fabricate hydraulic hoses 1/2" to 1" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 700 | LF | $ - 0 | $ - 0 | |
| B712 | Fabricate hydraulic hoses over 1" to 1-1/2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 300 | LF | $ - 0 | $ - 0 | |
| B713 | Fabricate hydraulic hoses over 1-1/2" to 2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 250 | LF | $ - 0 | $ - 0 | |
| B714 | Fabricate hydraulic hoses over 2" to 2-1/2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 250 | LF | $ - 0 | $ - 0 | |
| B715 | Unit Priced Labor Work - MUST BE NEGOTIATED BY KO. | Provide fully burdened labor rate to perform all Unit Priced Labor work subject to the Service Contract Act per the scope and delivery schedule specified in each task order. This is to provide work related to cylinder repair not covered by perpriced line items. MUST BE NEGOTIATED BY KO. | |||||
| 1800 | HR | $ - 0 | $0.00 | ||||
| B716 | MATERIALS | ||||||
| MUST BE NEGOTIATED BY KO | This Line item is for the cost for materials that will be required in conjunction with hourly line items in acordance with J- 1700000-1. $10,000 shall be the estimated cost of materials for bidding. Response and completion will be determined by delivery of associated line items. MUST BE NEGOTIATED BY KO. | 1 | LS | $10,000.00 | $10,000.00 | ||
| Total Option One | $ - 0 |
Contract No. N40085-14-D-8114, Rebuild Hydraulic Cylinders, Hampton Roads Region, Southeastern, Virginia
&P
NON-RECURRING ELIN -Option Two
ATTACHMENT J-0200000-04
EXHIBIT LINE ITEM NUMBERS
SOLICITATION/CONTRACT #N40085-12-R-4522 Regional Hydraulic Cylinder Rebuild / Repair
EXHIBIT A - CLIN 9000
Line Item 0003 Option Two -Non-Recurring Work
PROVIDE UNIT PRICES FOR NON-RECURRING WORK
IN ACCORDANCE WITH SECTION C. SPEC ITEM 4
ELINS A700 through A716
ELIN/
freda.reilly: Catalog No.
Contains the line item number (CLIN/SLIN/ELIN).
freda.reilly: Product Name
Contains a short description of the line item. This text box cannot exceed 120 characters.
Estimated
Contains estimated quantities to be used for the contract period as seen in all ELIN Schedules when the Contractor submits their bid/proposal. Estimated Quantities are not shown in contract catalogs in DOD EMALL. The Estimated Quantity column is shown here for Bidding/Proposal purposes only. DELETE this column after award prior to submitting Catalog for upload to DOD EMALL.
Unit of freda.reilly: Unit of Issue
Indicates the Unit of Issue for each product or service, such as square feet (SF). Unit of Issue must conform to DOD EMALL's available Units of Measure (UOMs).
NOTE: See EXCEL Tab below labeled - "NAVFAC UOMs"for complete listing. For example: Vertical Linear Feet (V/LF) is not on the list of acceptable UOMs. Resolution: In the "Description Extended" column state that the "LF" Unit of Issue represents "Vertical Linear Feet".
Unit
Contains the unit price per Unit of Issue. This field is limited to a maximum of 16 digits, with up to four decimal places.
NOTE: DELETE Special Note to Bidder/Offerors after award and prior to submitting Catalog for upload to DOD EMALL.
Extended
Contains total price for each ELIN (Estimated Quantity x Price x Unit Price = Extended Price). Extended Prices are not seen on DOD EMALL in our Catalogs. DELETE this column after award prior to submitting for upload to DOD EMALL. The Extended Price column is shown here for Bidding/Proposal purposes only.
| Catalog No. | Product Name | Description Extended | Quantity | Issue | Price | Price | |
| C700 | Service call for the repair of a hydraulic cylinder. Outside Barrel Diameter three (3) inches or less. The Contractors limit of liability shall be two (2) hours of labor and $100.00 in material / subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 250 | EA | $ - 0 | $ - 0 | |
| C701 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than three (3) inches and up to five (5) inches. The Contractors limit of liability shall be two (2) hours of labor and $150.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 350 | EA | $ - 0 | $ - 0 | |
| C702 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than five (5) inches and up to seven (7) inches. The Contractors limit of liability shall be three (3) hours of labor and $200.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 200 | EA | $ - 0 | $ - 0 | |
| C703 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than seven (7) inches and up to eight (8) inches. The Contractors limit of liability shall be three (3) hours of labor and $250.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 100 | EA | $ - 0 | $ - 0 | |
| C704 | Service call for the break down and cost estimate of a hydraulic cylinder repair. Outside Barrel diameter more than eight (8) inches and up. The Contractors limit of liability shall be three (3) hours of labor and $0.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. The KTR shall provide the Government with a detailed cost estimate of all work that is required to return the cylinder to OEM condition. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 50 | EA | $ - 0 | $ - 0 | |
| C705 | Fabricate hydraulic hoses under 1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 2000 | LF | $ - 0 | $ - 0 | |
| C706 | Fabricate hydraulic hoses 1/2" to 1" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1500 | LF | $ - 0 | $ - 0 | |
| C707 | Fabricate hydraulic hoses over 1" to 1-1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1000 | LF | $ - 0 | $ - 0 | |
| C708 | Fabricate hydraulic hoses over 1-1/2" to 2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 2000 | LF | $ - 0 | $ - 0 | |
| C709 | Fabricate hydraulic hoses over 2" to 2-1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1000 | LF | $ - 0 | $ - 0 | |
| C710 | Fabricate hydraulic hoses under 1/2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1000 | LF | $ - 0 | $ - 0 | |
| C711 | Fabricate hydraulic hoses 1/2" to 1" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 700 | LF | $ - 0 | $ - 0 | |
| C712 | Fabricate hydraulic hoses over 1" to 1-1/2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 300 | LF | $ - 0 | $ - 0 | |
| C713 | Fabricate hydraulic hoses over 1-1/2" to 2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 250 | LF | $ - 0 | $ - 0 | |
| C714 | Fabricate hydraulic hoses over 2" to 2-1/2" inside diameter (ID) (with stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (with stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 250 | LF | $ - 0 | $ - 0 | |
| C715 | Unit Priced Labor Work - MUST BE NEGOTIATED BY KO. | Provide fully burdened labor rate to perform all Unit Priced Labor work subject to the Service Contract Act per the scope and delivery schedule specified in each task order. This is to provide work related to cylinder repair not covered by perpriced line items. MUST BE NEGOTIATED BY KO. | |||||
| 1800 | HR | $ - 0 | $ - 0 | ||||
| C716 | MATERIALS | ||||||
| MUST BE NEGOTIATED BY KO | This Line item is for the cost for materials that will be required in conjunction with hourly line items in acordance with J- 1700000-1. $10,000 shall be the estimated cost of materials for bidding. Response and completion will be determined by delivery of associated line items. MUST BE NEGOTIATED BY KO. | 1 | LS | $10,000.00 | $10,000.00 | ||
| Total Option Two | $ - 0 |
Contract No. N40085-14-D-8114, Rebuild Hydraulic Cylinders, Hampton Roads Region, Southeastern, Virginia
&P
NON-RECURRIN ELIN -Option Three
ATTACHMENT J-0200000-04
EXHIBIT LINE ITEM NUMBERS
SOLICITATION/CONTRACT #N40085-12-R-4522 Regional Hydraulic Cylinder Rebuild / Repair
EXHIBIT A - CLIN 9000
Line Item 0004 Option Three - Non-Recurring Work
PROVIDE UNIT PRICES FOR NON-RECURRING WORK
IN ACCORDANCE WITH SECTION C. SPEC ITEM 4
ELINS A700 through A716
ELIN/
freda.reilly: Catalog No.
Contains the line item number (CLIN/SLIN/ELIN).
Contains an extended description of the product or service the Contractor is to perform, including any applicable response and completion times. When a Shopper is in DOD EMALL - this additional information can be accessed by clicking on the "Product Name" in the Catalog. The Product Detail screen will open providing more details about the product or service such as Unit of Issue, Contract Number, Contractor (Supplier), Catalog Number/CLIN, etc. This text box cannot exceed 2048 characters.
Estimated
Contains estimated quantities to be used for the contract period as seen in all ELIN Schedules when the Contractor submits their bid/proposal. Estimated Quantities are not shown in contract catalogs in DOD EMALL. The Estimated Quantity column is shown here for Bidding/Proposal purposes only. DELETE this column after award prior to submitting Catalog for upload to DOD EMALL.
Unit of freda.reilly: Unit of Issue
Indicates the Unit of Issue for each product or service, such as square feet (SF). Unit of Issue must conform to DOD EMALL's available Units of Measure (UOMs).
NOTE: See EXCEL Tab below labeled - "NAVFAC UOMs"for complete listing. For example: Vertical Linear Feet (V/LF) is not on the list of acceptable UOMs. Resolution: In the "Description Extended" column state that the "LF" Unit of Issue represents "Vertical Linear Feet".
Unit
Contains the unit price per Unit of Issue. This field is limited to a maximum of 16 digits, with up to four decimal places.
NOTE: DELETE Special Note to Bidder/Offerors after award and prior to submitting Catalog for upload to DOD EMALL.
Extended
Contains total price for each ELIN (Estimated Quantity x Price x Unit Price = Extended Price). Extended Prices are not seen on DOD EMALL in our Catalogs. DELETE this column after award prior to submitting for upload to DOD EMALL. The Extended Price column is shown here for Bidding/Proposal purposes only.
| Catalog No. | Product Name | Description Extended | Quantity | Issue | Price | Price | |
| D700 | Service call for the repair of a hydraulic cylinder. Outside Barrel Diameter three (3) inches or less. The Contractors limit of liability shall be two (2) hours of labor and $100.00 in material / subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 250 | EA | $ - 0 | $ - 0 | |
| D701 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than three (3) inches and up to five (5) inches. The Contractors limit of liability shall be two (2) hours of labor and $150.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 350 | EA | $ - 0 | $ - 0 | |
| D702 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than five (5) inches and up to seven (7) inches. The Contractors limit of liability shall be three (3) hours of labor and $200.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 200 | EA | $ - 0 | $ - 0 | |
| D703 | Service call for the repair of a hydraulic cylinder. Outside Barrel diameter more than seven (7) inches and up to eight (8) inches. The Contractors limit of liability shall be three (3) hours of labor and $250.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. If repairs can be made within the Contractors Limit of liability the Contractor shall make all repairs needed to return the cylinder to OEM condition. If at any time the Contractor discovers that the needed repairs exceed the limit of liability, the KTR shall provide the Government with a detailed cost estimate of all work that exceeds the Contractors limit. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 100 | EA | $ - 0 | $ - 0 | |
| D704 | Service call for the break down and cost estimate of a hydraulic cylinder repair. Outside Barrel diameter more than eight (8) inches and up. The Contractors limit of liability shall be three (3) hours of labor and $0.00 in material / Subcontractor costs. | The KTR shall respond and pick up cylinder at Naval Station Norfolk or any work location within 50 mile radius of Naval Station Norfolk. The KTR shall disassemble the hydraulic cylinder and determine the work required to return the cylinder to OEM condition. The KTR shall provide the Government with a detailed cost estimate of all work that is required to return the cylinder to OEM condition. The Contracting officer will negoiate the repair costs and may issue a task order based on the labor and materials line items or may decide to have the remaining work done by other means. The cost of returning the cylinder to the Government shall be included in the Service Call. | 50 | EA | $ - 0 | $ - 0 | |
| D705 | Fabricate hydraulic hoses under 1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 2000 | LF | $ - 0 | $ - 0 | |
| D706 | Fabricate hydraulic hoses 1/2" to 1" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1500 | LF | $ - 0 | $ - 0 | |
| D707 | Fabricate hydraulic hoses over 1" to 1-1/2" inside diameter (ID) (without stainless steel braiding additional outside reinforcement) | Fabricate hydraulic hoses (without stainless steel braiding additional outside reinforcement) with fittings that match specific manufacturer equipment. All hoses must match the OEM pressure requirements and shall be bench tested for pressure and leaks. Hose fabrication is priced by the linear foot. | 1000 | LF | $ - 0 | $ - 0 |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it.