N4008518B0077 Dwgs.pdf

GENERAL NOTES LEGEND AND ABBREVIATIONS

The Walker Group Architecture, Inc PO Box 541, New Bern, NC 28563

252.636.8778 (PHONE)

252.636.8992 (FAX)

WALKER

GROUP

i n c o r p o r a t e d the

ARCHITECTURE

DISCLOSURE OF INFORMATION

CONTRACTOR SHALL COMPLY AS FOLLOWS:

(A) THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS-

(1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR

(2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE

(B) REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL

SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE.

(C) THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER HIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION

TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

MANUFACTURER'S RECOMMENDATIONS:

DETAILX

SEQUENCE OF OPERATION (EMERGENCY SHUTDOWN)

SEQUENCE OF OPERATION (DOAS-1)

09-03-20

SEQUENCE OF OPERATION - EF-2

CONTROLS CONTRACTOR AND ELECTRICAL

CONTRACTOR COORDINATION:

E.1

E.1 The Walker Group Architecture, Inc PO Box 541, New Bern, NC 28563

252.636.8778 (PHONE)

252.636.8992 (FAX)

WALKER

GROUP

i n c o r p o r a t e d the

ARCHITECTURE

DISCLOSURE OF INFORMATION

CONTRACTOR SHALL COMPLY AS FOLLOWS:

(A) THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS-

(1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR

(2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE

(B) REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL

SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE.

(C) THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER HIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION

TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

DEMOLITION NOTES

N

MECHANICAL CONSTRUCTION FLOOR PLAN

CONSTRUCTION NOTES

N

MECHANICAL DEMOLITION FLOOR PLAN

09-03-20

PO Box 541, New Bern, NC 28563

252.636.8778 (PHONE)

252.636.8992 (FAX)

WALKER

GROUP

i n c o r p o r a t e d the

ARCHITECTURE

DISCLOSURE OF INFORMATION

CONTRACTOR SHALL COMPLY AS FOLLOWS:

(A) THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS-

(1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR

(2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE

(B) REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL

SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE.

(C) THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER HIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION

TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

DUCTWORK FITTING DETAILF

WALL LOUVER DETAILDCONDENSATE DRAIN TRAP DETAILC

CONCRETE PAD DETAIL - EXTERIORBDUCTWORK SUPPORT DETAILA

CABINET EXHAUST FAN DETAILE

EMERGENCY HVAC

SHUTDOWN

HVAC EMERGENCY SHUTOFF SWITCHH

NOTES:

EXTERIOR DUCTWORK DETAILG

09-03-20

FAN SCHEDULE

LOUVER SCHEDULE

GRILLE, REGISTER & DIFFUSER SCHEDULE

DEDICATED OUTDOOR AIR SYSTEM SCHEDULE

PO Box 541, New Bern, NC 28563

252.636.8778 (PHONE)

252.636.8992 (FAX)

WALKER

GROUP

i n c o r p o r a t e d the

ARCHITECTURE

DISCLOSURE OF INFORMATION

CONTRACTOR SHALL COMPLY AS FOLLOWS:

(A) THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS-

(1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR

(2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE

(B) REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL

SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE.

(C) THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER HIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION

TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

09/03/2020

LIGHTING FIXTURE

EXISTING EMERGENCY LIGHTING FIXTURE

EXIT LIGHTING FIXTURE, WITH DIRECTIONAL ARROWS AS INDICATED WITH

BATTERY PACK - CONNECT AHEAD OF LOCAL SWITCH.

EMERGENCY BATTERY LIGHTING UNIT, CONNECT AHEAD OF LOCAL

SWITCH.

LIGHTING FIXTURE TYPE SYMBOL. SEE LIGHTING FIXTURE DETAILS.

SINGLE POLE SWITCH, 20A, 120/277V, 46" AFF UON

THREE-WAY SWITCH, 20A, 120/277V, 46" AFF UON

EQUIPMENT CONNECTION

MOTOR CONNECTION

SAFETY SWITCH, 60A-3P, FU @ 30A, 3R

ELECTRICAL PANELBOARD

ELECTRICAL CIRCUIT RUN IN CONDUIT AND CIRCUIT HOMERUN TO

PANELBOARD (PANEL AND CIRCUIT DESIGNATION AS INDICATED). AS A

MINIMUM CONDITION, EACH SINGLE PHASE CIRCUIT MUST HAVE 1 #12

PHASE CONDUCTOR, 1 #12 NEUTRAL CONDUCTOR AND 1 #12 GROUNDING

CONDUCTOR IN 1/2" CONDUIT. PROVIDE ADDITIONAL PHASE CONDUCTORS

AS REQUIRED FOR "MULTIPLE PHASED" ELECTRICAL LOADS. PROVIDE

NEUTRAL CONDUCTOR TO ALL WALL SWITCH OUTLET BOXES WHETHER

REQUIRED OR NOT. PROVIDE ADDITIONAL "SWITCH LEG" CONDUCTORS TO

PROVIDE THE LIGHT FIXTURE CONTROL INDICATED. MULTIPLE SINGLE

PHASE CONDUCTORS MAY BE GROUPED TOGETHER IN A COMMON

CONDUIT IN ACCORDANCE WITH THE NEC AND AT THE CONTRACTOR'S

DISCRETION. GROUNDING CONDUCTORS MAY BE SHARED AS ALLOWED BY

THE NEC. NEUTRAL CONDUCTORS MUST NOT BE SHARED. MULTI-POLE

BREAKERS MUST BE PROVIDED IN ACCORDANCE WITH THE NEC WHERE

MULTI-WIRE BRANCH CIRCUITS ARE REQUIRED. CONDUIT LARGER THAN

1/2" AND CONDUCTORS LARGER THAN #12 MUST BE AS INDICATED.

LIGHTING

POWER

GENERAL

WALL MOUNTED LIGHTING FIXTURE

NOTE SYMBOL

MOTOR RATED SWITCH WITH THERMAL OVERLOADS 20A, 120V, UON,

MOUNTED WITHIN SIGHT OF MOTOR.

DRY-TYPE TRANSFORMER

PAD MOUNTED TRANSFORMER

INDICATES FRONT

POWER (CONT.)GENERAL: UNLESS SPECIFICALLY INDICATED OTHERWISE, ALL WORK

SHOWN ON ELECTRICAL DRAWINGS IS NEW WORK TO BE PROVIDED

UNDER THIS CONTRACT.

COORDINATION: COORDINATE AND COOPERATE WITH ALL TRADES ON

THE PROJECT. THE CONTRACTOR MUST REVIEW ALL CONTRACT

DOCUMENTS INCLUDING ARCHITECTURAL DRAWINGS AND

SPECIFICATIONS. CONTRACTOR MUST COORDINATE AND ADJUST

ACCORDINGLY AS DIRECTED BY THE CONTRACTING OFFICER.

AS-BUILT DRAWINGS: SECURE AN EXTRA SET OF ELECTRICAL DRAWINGS

TO BE KEPT ON SITE AND MARK, DAILY, THE DRAWINGS IN RED AS THE

PROJECT PROGRESSES IN ORDER TO KEEP AN ACCURATE RECORD OF

ALL DEVIATIONS BETWEEN THE WORK SHOWN ON THE DRAWINGS AND

THE WORK WHICH IS ACTUALLY INSTALLED. THESE MARKED DRAWINGS

MUST REFLECT ANY AND ALL CHANGES AND REVISIONS TO THE ORIGINAL

DESIGN WHICH EXISTS IN THE COMPLETED WORK. DELIVER THE MARKED

DRAWINGS TO THE ENGINEER AT PROJECT CLOSE-OUT.

GROUNDING: PROVIDE GROUNDING IN ACCORDANCE WITH THE NEC FOR

THE ENTIRE ELECTRICAL SYSTEM INCLUDING EQUIPMENT FRAMES

CONDUITS, SWITCHES, CONTROLLERS, WIRE-WAYS, NEUTRAL

CONDUCTORS, AND OTHER EQUIPMENT. PROVIDE A GROUNDING

CONDUCTOR IN ALL POWER CONDUITS.

J-BOX LABELING: LABEL ALL JUNCTION BOXES WITH PERMANENT

MARKER IDENTIFYING CIRCUIT NUMBER AND PANELBOARD OF CIRCUITS

WITHIN.

MOTOR COORDINATION: MOTORS, MOTOR STARTERS, CONTROLLERS,

INTEGRAL DISCONNECT SWITCHES, AND CONTACTORS MUST BE

PROVIDED WITH THEIR RESPECTIVE PIECES OF EQUIPMENT BY THE

EQUIPMENT SUPPLIER. COMMUNICATE WITH THE TRADES PROVIDING THE

EQUIPMENT, VERIFYING ALL REQUIREMENTS, PROVIDE ALL ELECTRICAL

CONNECTIONS REQUIRED THEREIN, AND INSTALL MOTOR STARTERS.

MOTOR DISCONNECTS: ALL MOTORS MUST HAVE DISCONNECTING

MEANS.

MOTOR CONTROLLERS: ALL 3-PHASE MOTORS MUST HAVE MAGNETIC

MOTOR CONTROLLERS WITH SOLID STATE OVERLOAD RELAY

PROTECTION. THE SOLID STATE OVERLOAD RELAY MUST HAVE PHASE

LOSS AND PHASE OVERCURRENT PROTECTION WITH AUTOMATIC RESET

UPON RETURN OF NORMAL POWER.

MOTOR FUSE PROTECTION: WHERE FUSE PROTECTION IS SPECIFICALLY

REQUIRED BY THE EQUIPMENT MANUFACTURER, PROVIDE FUSED

SWITCHES IN LIEU OF NON-FUSED SWITCHES OR IN LIEU OF ENCLOSED

CIRCUIT BREAKERS, OR OTHER DEVICES INDICATED.

CONNECTION DETAILS: SECURE APPROVED SHOP DRAWINGS SHOWING

WIRING DIAGRAMS, ROUGH-IN AND HOOK UP DETAILS FROM OTHER

INVOLVED CONTRACTORS FOR EQUIPMENT WHICH MUST BE CONNECTED

ELECTRICALLY.

COORDINATION DETAILS: MECHANICAL EQUIPMENT WILL BE FURNISHED

AND INSTALLED BY THE MECHANICAL CONTRACTOR. THE LOCATIONS

SHOWN ON THE ELECTRICAL DRAWINGS ARE APPROXIMATE.

COORDINATE WITH THE MECHANICAL CONTRACTOR TO DETERMINE THE

EXACT LOCATION OF EACH PIECE OF EQUIPMENT AND DETERMINE THE

EXACT ROUGH-IN AND CONNECTION REQUIREMENTS.

WORKING CLEARANCE: COORDINATE FINAL LOCATIONS OF ELECTRICAL

EQUIPMENT WITH MECHANICAL DUCTWORK, PIPING ETC. AND ASSURE

WORKING CLEARANCE REQUIRED BY NEC WILL BE MET. SUFFICIENT

ACCESS AND WORKING SPACE MUST BE PROVIDED AND MAINTAINED

AROUND ELECTRICAL EQUIPMENT AS REQUIRED BY THE NATIONAL

ELECTRICAL CODE. CONTRACTOR MUST COORDINATE FINAL LOCATION

OF EQUIPMENT PROVIDED AND INSTALLED BY OTHER TRADES.

STARTER MOUNTING: WHERE AN INDIVIDUALLY MOUNTED SAFETY

SWITCH, STARTER OR CIRCUIT BREAKER IS SHOWN ADJACENT TO ITS

RESPECTIVE LOAD AND NOT MOUNTED ON A WALL, PROVIDE ALL

SUPPORTS, BRACKETS, ANCHORING, ETC. NECESSARY TO PROPERLY

SUPPORT THE DEVICE.

LIGHTING ARRANGEMENT: ARRANGE LIGHTING FIXTURES IN

ACCORDANCE WITH THE ARCHITECTURAL REFLECTED CEILING PLANS.

LIGHTING COORDINATION: COORDINATE LIGHTING FIXTURES WITH

GRILLES, DIFFUSERS, SPRINKLER HEADS, AND ACCESS PANELS, ETC.

PROVIDE FIXTURE MOUNTING BRACKETS, ACCESSORIES, PLASTER

FRAMES, ETC.. SUITABLE FOR THE CEILING TYPES INDICATED ON THE

ARCHITECTURAL PLANS.

LIGHTING CONTROL TESTING: UPON COMPLETION OF THE INSTALLATION

OF ALL LIGHTING SYSTEMS AND CONTROL DEVICES, CONTRACTOR MUST

CONFIRM PROPER OPERATION OF ALL LIGHTING CONTROLS, AND

DEMONSTRATE PROPER OPERATION TO THE CONTRACTING OFFICER.

MATERIAL COORDINATION: VERIFY CEILING AND WALL CONSTRUCTION

AND MATERIAL PRIOR TO ORDERING LIGHT FIXTURES OR OTHER DEVICES

TO INSURE PROPER FIXTURE OR DEVICE IS FURNISHED TO MATCH

CONSTRUCTION.

MOUNTING HEIGHTS: MOUNTING HEIGHTS INDICATED ARE FROM THE

FINISHED FLOOR TO THE CENTERLINE OF THE WIRING DEVICE UNLESS

OTHERWISE NOTED. MOUNTING HEIGHTS OF LIGHTING FIXTURES ARE TO

THE BOTTOM OF THE FIXTURE UNLESS OTHERWISE NOTED.

DEVICE LOCATIONS: COORDINATE LOCATIONS OF SWITCHES,

RECEPTACLES, AND TELE/DATA OUTLETS WITH OTHER WALL MOUNTED

DEVICES SUCH AS THERMOSTATS AND CONTROL STATIONS.

DEVICE COORDINATION: THOROUGHLY REVIEW AND COORDINATE ALL

CASEWORK AND CABINET DRAWINGS AND ARCHITECTURAL ELEVATIONS

WITH DEVICE LOCATIONS PRIOR TO ROUGH-IN OF OUTLET BOXES.

CLEAN UP: ON PROJECT CLOSE-OUT CLEAN ALL ELECTRICAL DEVICES,

LIGHTING FIXTURES, LENSES, AND REMOVE ALL PAINT SPATTERS FROM

DEVICES, FIXTURES AND PLATES. REPAIR ALL INOPERATIVE LIGHTING

FIXTURES.

THE FOLLOWING SUBSCRIPTS MUST APPLY TO RECEPTACLES WHERE USED:

CEILING MOUNTED DUAL TECHNOLOGY ULTRASONIC/PASSIVE INFRARED

OCCUPANCY SENSOR.

AND

SWITCH RATING

NUMBER OF POLES

FUSE RATING (NF INDICATES NON-FUSED)

NEMA ENCLOSURE IF OTHER THAN NEMA 1

T T

A

O

E

M

DUPLEX CONVENIENCE RECEPTACLE 20A, 120V, 18" AFF, UON

· GFI: GROUND FAULT INTERRUPTING TYPE RECEPTACLE

· +XX": DEVICE MOUNTING HEIGHT DESIGNATION ABOVE FINISHED FLOOR IF

OTHER THAN 18" OR 46".

· WP: WEATHER RESISTANT GFI RECEPTACLE WITH WEATHERPROOF

WHILE-IN-USE COVER.

A AMPERE

ACCU AIR COOLED CONDENSING UNIT

AFF ABOVE FINISHED FLOOR

AFG ABOVE FINISHED GRADE

AIC AMPERE INTERRUPTING CAPACITY

EBU EMERGENCY BATTERY UNIT

EC EMPTY CONDUIT

EF EXHAUST FAN

ETR EXISTING TO REMAIN

EWC ELECTRIC WATER COOLER

FLA FULL LOAD AMPS

GFI GROUND FAULT INTERRUPTER

GND GROUND

HP HORSE POWER/HEAT PUMP

IG ISOLATED GROUND

KAIC THOUSAND AMPERE

INTERRUPTING CAPACITY

KVA KILO-VOLT-AMPERES

KW KILO-WATTS

LPW LUMENS PER WATT

LTG LIGHTING

MCA MINIMUM CIRCUIT AMPS

MCB MAIN CIRCUIT BREAKER

MLO MAIN LUGS ONLY

MTD MOUNTED

NEC NATIONAL ELECTRICAL CODE

NF NON-FUSED

NIC NOT IN CONTRACT

NTS NOT TO SCALE

OC ON CENTER

P POLE

PCP PUMP CONTROL PANEL

PF POWER FACTOR

Ø PHASE

PRI PRIMARY

SEC SECONDARY

TYP TYPICAL

UON UNLESS OTHERWISE NOTED

V VOLT

W WATTS/WIRE

WP WEATHERPROOF

DASHED ITEMS: ALL ITEMS SHOWN DASHED ON DEMOLITION PLANS ARE EXISTING AND SHALL

BE REMOVED.

SOLID ITEMS: ALL ITEMS SHOWN SOLID ON DEMOLITION PLANS ARE EXISTING TO REMAIN.

CIRCUITING TO REMAIN: EXISTING CIRCUITING TO REMAIN SHALL BE REROUTED OR

RECONNECTED, AS REQUIRED, WHERE AFFECTED BY NEW WORK IN ORDER TO MAINTAIN

CONTINUITY OF THE CIRCUIT.

REUSE OF EXISTING CIRCUITRY: EXISTING CIRCUITRY SERVING LIGHTING FIXTURES AND/OR

RECEPTACLES FOR A GIVEN AREA SHALL BE REUSED WHERE INDICATED TO SERVE THE NEW

LAYOUT. PROVIDE CIRCUIT MODIFICATIONS INDICATED OR AS OTHERWISE REQUIRED TO

MAINTAIN THE CONTINUITY OF EXISTING CIRCUITS THAT REMAIN.

EXISTING CONDUIT: ALL EXISTING CONDUITS AND WIRING THAT WILL NOT BE REUSED SHALL

BE REMOVED WHERE THEY WILL BE EXPOSED UPON COMPLETION OF NEW WORK. EXISTING

CONDUIT TO REMAIN CONCEALED IN WALLS SHALL BE ABANDONED. EXISTING CONDUIT TO

REMAIN BELOW FLOOR SLAB SHALL BE CUT OFF ONE INCH BELOW ROUGH FLOOR AND

GROUTED FLUSH. ALL EXISTING WIRING IN CONDUITS TO BE ABANDONED SHALL BE

DISCONNECTED FROM POWER SOURCE AND REMOVED.

REPAIR DAMAGE: EXERCISE CARE IN REMOVAL OF DEMOLITION ITEMS. REPAIR, AT NO

ADDITIONAL COST TO THE OWNER, ANY DAMAGE CAUSED TO EXISTING CONSTRUCTION

AND/OR EQUIPMENT TO REMAIN.

ASSOCIATED APPURTENANCES: REMOVE ALL ELECTRICAL APPURTENANCES (DISCONNECTS,

STARTERS, WIRING, CONDUIT, ETC.) ASSOCIATED WITH ITEMS TO BE REMOVED INCLUDING

EQUIPMENT TO BE REMOVED BY OTHERS.

KNOCKOUT PLUGS AND COVERS: ALL CONDUIT REMOVED SHALL BE REMOVED IN ITS

ENTIRETY, INCLUDING FITTINGS, MOUNTING DEVICES, MOUNTING HARDWARE, ETC. PROVIDE

CONDUIT PLUGS AND BLANKS FOR ALL OPENINGS CREATED BY THE REMOVAL OF CONDUIT.

PROVIDE BLANK COVER PLATES FOR ALL OPENED OUTLET BOXES CREATED BY THE REMOVAL

OF EQUIPMENT AND/OR DEVICES

DEMOLISHED MATERIALS: ALL MATERIALS REMOVED UNDER DEMOLITION, NOT TO BE

RELOCATED OR DESIGNATED TO BE TURNED OVER TO THE OWNER, SHALL BECOME THE

PROPERTY OF THE CONTRACTOR AND SHALL BE REMOVED COMPLETELY FROM THE SITE.

SCHEDULE OUTAGES: ALL WORK AND ALL POWER OUTAGES IN THE EXISTING BUILDING SHALL

BE SCHEDULED AT TIMES CONVENIENT TO THE OWNER.

NOTIFICATION: NOTIFY THE OWNER PRIOR TO TURNING OFF ANY CIRCUITS.

EXISTING PANELBOARD MDP SCHEDULE

600 MCB, 480/277 VOLT, 3 PHASE, 4 WIRE, 35 KAIC MINIMUM, SURFACE MOUNT, GROUND BUS

LOAD (AMPS) BKR CKT PHASE CKT BKR LOAD (AMPS)

LOAD SERVED A B C TRIP NO. A B C NO. TRIP A B C LOAD SERVED

NITRO GEN. * 100/3P 1 2 SPACE ONLY

* 4 SPACE ONLY

* 6 SPACE ONLY

NITRO GEN. * 100/3P 7 8 SPACE ONLY

* 10 SPACE ONLY

* 12 SPACE ONLY

NITRO GEN. * 100/3P 13 14 100/3P * NITRO GEN.

SPARE 60/3P 19 20 20/1P * LTS STORAGE

22 20/1P * LTS NITRO PROD.

24 20/1P * EXTERIOR LIGHTS

AIR COMPRESSOR * 70/3P 25 26 20/1P 0.8 LIGHTS

* 28 20/1P * TIME CLOCK

* 30 20/1P SPARE

NITRO GEN. * 100/3P 31 32 20/3P * FENCE LIGHTING

PANEL PP1 * 125/3P 37 38 60/3P * TVSS

VIA XFMR * *

SPACE ONLY 43 44 20/3P * FENCE LIGHTING

SPACE ONLY 45 *

SPACE ONLY 47 *

SPACE ONLY 49 50 25/3P 17.0 DOAS-1

SPACE ONLY 51 17.0

SPACE ONLY 53 17.0

NOTES:

PANELBOARD IS SQUARE D TYPE "NF"

* INDICATES EXISTING LOAD

BOLD INDICATES NEW LOAD AND CIRCUIT BREAKER AS INDICATED

EXISTING PANELBOARD PP1 SCHEDULE

300 MCB, 208/120 VOLT, 3 PHASE, 4 WIRE, 10 KAIC MINIMUM, SURFACE MOUNT, GROUND BUS

LOAD (AMPS) BKR CKT PHASE CKT BKR LOAD (AMPS)

LOAD SERVED A B C TRIP NO. A B C NO. TRIP A B C LOAD SERVED

MOTORIZED DOOR * 20/1P 1 2 20/3P * EF-2

MOTORIZED DOOR * 20/1P 3 *

MOTORIZED DOOR * 20/1P 5 *

MOTORIZED DOOR * 20/1P 7 8 20/3P * EF-3

MOTORIZED DOOR * 20/1P 9 *

MOTORIZED DOOR * 20/1P 11 *

REC. MAIN PROD. * 20/1P 13 14 30/2P * AHHP-1

REC. MAIN PROD. * 20/1P 15 *

REC. MAIN PROD. * 20/1P 17 18 20/2P * HP-1

REC. MAIN PROD. * 20/1P 19 *

REC. MAIN PROD. * 20/1P 21 22 50/2P * WELDER

REC. TOOL STORAGE * 20/1P 23 *

REC. TOOL STORAGE * 20/1P 25 26 20/1P * EF-1

REC. TOOL STORAGE * 20/1P 27 28 20/1P * TBB

REC. CART/CYL. STO. * 20/1P 29 30 20/1P * TBB

REC. CART/CYL. STO. * 20/1P 31 32 40/2P SPARE

REC. CART/CYL. STO. * 20/1P 33

OXYGEN ANALYZER 6.0 20/1P 35 36 40/3P * CRANE

CONTROLS * 20/1P 37 *

OUTSIDE REC. * 20/1P 39 *

RECEPTACLES 3.0 20/1P 41 42 20/1P 1.5 RECEPTACLE

NOTES:

PANELBOARD IS SQUARE D TYPE "NQ"

* INDICATES EXISTING LOAD

BOLD INDICATES NEW LOAD AND CIRCUIT BREAKER AS INDICATED

BUILDING IS NOT SPRINKLERED THEREFORE LIQUID OXYGEN STORAGE SHALL BE LIMITED TO A MAXIMUM OF 150LBS.

AutoCAD SHX Text

SATISFACTORY TO: DATE

AutoCAD SHX Text

APPROVED: PWO OR OICC DATE

AutoCAD SHX Text

DESIGN DIR.

AutoCAD SHX Text

SUBMITTED BY:

AutoCAD SHX Text

CHK.

AutoCAD SHX Text

DR.

AutoCAD SHX Text

DES.

AutoCAD SHX Text

SYM

AutoCAD SHX Text

SHEET OF

AutoCAD SHX Text

CODE IDENT. NO

AutoCAD SHX Text

SIZE

AutoCAD SHX Text F

AutoCAD SHX Text

SPEC.

AutoCAD SHX Text

SCALE: NOTED

AutoCAD SHX Text

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING COMMAND

AutoCAD SHX Text

NAVFAC DRAWING NO.

AutoCAD SHX Text

CONST. CONTR. NO.

AutoCAD SHX Text

CAMP LEJEUNE, NORTH CAROLINA

AutoCAD SHX Text

MARINE CORPS BASE

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

DATE

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

AutoCAD SHX Text

B. WALKER

AutoCAD SHX Text

T.H. BURTON, PE

AutoCAD SHX Text N40085-18-B-0077

AutoCAD SHX Text 18-0077

AutoCAD SHX Text

CONSTRUCT CRYOGENICS OXYGEN

AutoCAD SHX Text

ANALYZER FACILITY, AS3546

AutoCAD SHX Text

AutoCAD SHX Text E-001

AutoCAD SHX Text

ELECTRICAL GENERAL NOTES, LEGEND, ABBREVIATIONS, AND SCHEDULES

AutoCAD SHX Text 60030005

AutoCAD SHX Text

K. MEARS

AutoCAD SHX Text

M. CUIPPA

AutoCAD SHX Text

J. BARKLEY

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text V

AutoCAD SHX Text F

AutoCAD SHX Text O

AutoCAD SHX Text H

AutoCAD SHX Text T

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text W

AutoCAD SHX Text N

AutoCAD SHX Text O

AutoCAD SHX Text M

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text C

AutoCAD SHX Text P

AutoCAD SHX Text R

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text O

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text L

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text E

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text

JAMES E. BARKLEY, JR.

AutoCAD SHX Text Lic. No. 043854

AutoCAD SHX Text

GENERAL ELECTRICAL NOTES

AutoCAD SHX Text

ELECTRICAL LEGEND

AutoCAD SHX Text

ABBREVIATIONS

AutoCAD SHX Text

ELECTRICAL DEMOLITION NOTES

AutoCAD SHX Text

HAZARDOUS NOTE:

E.1

STORAGE

WP

60" 60"

M

60"

60"

M

60"

60"

60"

60"

60"

MDP T

TPP1

PP1

O

O

50A 250V

E.1

STORAGE

ABO ROOM

E

E

30A-3P, FU@ 25A,

4X

DOAS-1; 21.3

MCA, 480V, 3Ø

MDP-50, 4 #10, 1 #10

GND - 1/2"C

MOTORIZED DAMPER,

120V

WP

60"

60"

60"

M

60"

60"

60"

60"

60"

MDP T

TPP1

PP1

50A 250V

PP1-41 PP1-35

OXYGEN ANALYZER,

120V

E

PP1-42

MOTORIZED DAMPER,

120V

EF-2, 120V

E

OXYGEN DEPLETION

PANEL, 120V

E

OXYGEN DEPLETION

LIGHT, 120V

E.1

STORAGE

O

ABO ROOM

O

A A

MDP-26

E.1

STORAGE

ABO ROOM

16.6

20.4

23.6

25.0

25.0

23.6

20.4

16.6

20.1

25.0

29.0

30.9

30.9

29.0

25.0

20.1

22.8

28.3

32.9

35.1

35.1

32.8

28.3

22.7

24.5

30.3

35.3

37.5

37.5

35.3

30.3

24.4

25.5

31.6

36.8

39.0

39.0

36.7

31.6

25.5

26.1

32.4

37.6

40.1

40.1

37.6

32.4

26.1

26.1

32.4

37.6

40.0

40.0

37.6

32.4

26.1

25.5

31.6

36.7

39.0

39.0

36.8

31.6

25.6

24.4

30.3

35.2

37.4

37.5

35.3

30.3

24.5

22.7

28.3

32.8

35.0

35.1

32.8

28.3

22.8

20.1

25.0

29.0

30.9

30.9

29.0

25.0

20.1

16.6

20.4

23.6

25.0

25.0

23.6

20.4

16.6

The Walker Group Architecture, Inc PO Box 541, New Bern, NC 28563

252.636.8778 (PHONE)

252.636.8992 (FAX)

WALKER

GROUP

i n c o r p o r a t e d the

ARCHITECTURE

DISCLOSURE OF INFORMATION

CONTRACTOR SHALL COMPLY AS FOLLOWS:

(A) THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS-

(1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR

(2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE

(B) REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL

SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE.

(C) THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER HIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION

TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

N

ELECTRICAL CONSTRUCTION POWER PLAN

SCALE: 3/16" = 1'-0"

CONSTRUCTION NOTES

REMOVE AND RETAIN EXISTING LIGHT FIXTURE, SENSOR, SWITCHES, AND ASSOCIATED LIGHTING

CIRCUIT FOR REUSE IN NEW WORK

REINSTALL EXISTING LIGHT FIXTURE, SENSOR, AND SWITCHES RETAINED DURING DEMOLITION AND RECONNECT TO EXISTING LIGHTING CIRCUIT RETAINED DURING DEMOLITION. EXTEND AND

REWORK CIRCUIT AS REQUIRED.

N

ELECTRICAL DEMOLITION FLOOR PLAN

SCALE: 3/16" = 1'-0"

09/03/2020

N

ELECTRICAL CONSTRUCTION LIGHTING PLAN

SCALE: 3/16" = 1'-0"

A

FIXTURE

SYMBOL

LUMENS, WATTS, COLOR

TEMPERATURE VOLTAGE MOUNTING NOTES

CEILING, RECESSED120/2774,500, 42, 3500K

120/277 UNIVERSAL, THERMOPLASTIC,

WHITE FINISH NL-61

PRISMATIC LENS LED TROFFER

REVISED: APRIL 2016

NL-3

LIGHTING PLATE:

LUMINAIRE REQUIREMENTS:

1. HOUSING - DIE-FORMED, COLD ROLLED STEEL, PAINTED AFTER FABRICATION. EXTRUDED

ALUMINUM DOOR WITH SPRING-LOADED CAM LATCHES. HIGH REFLECTANCE, WHITE

POLYESTER POWDER-COATED FINISH. OPTIONAL SIZES OF 1FT x 4FT, 2FT x 2FT, AND 2FT x 4FT

AVAILABLE.

2. LIGHT SOURCE - LED BOARD OR ARRAY WITH MINIMUM 50K HOURS RATED LIFE AT L70, 3500K

COLOR TEMPERATURE UON, MAXIMUM 4-STEP MCADAM ELLIPSE BINNING TOLERANCE FOR

COLOR CONSISTENCY, MINIMUM EFFICACY OF 90 LUMENS/WATT, WITH A MINIMUM CRI OF 80.

INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE.

4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF,

OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, < 20% TOTAL HARMONIC

DISTORTION. STEP-DIMMABLE OR FULLY DIMMABLE AS INDICATED IN LUMINAIRE SCHEDULE.

5. CERTIFICATION - UL 1598, DAMP LOCATION, DLC QUALIFIED, AND ROHS COMPLIANT. COMPLIES

WITH LM79, LM80 AND TM21 TESTING STANDARDS. UL 924 WHEN EQUIPPED WITH EMERGENCY

BATTERY BACK-UP. IC RATED WHEN INDICATED.

6. MOUNTING - RECESSED IN SUSPENDED ACOUSTICAL TILE OR HARD CEILING.

7. THIS SKETCH IS A NON-PROPRIETARY GRAPHIC REPRESENTATION OF A LUMINAIRE THAT MAY

MEET THE SPECIFICATION REQUIREMENTS. IT IS NOT INTENDED TO INDICATE A CERTAIN

MANUFACTURER OR PREFERENCE.

END VIEW

FRONT VIEW

NOTES:

UNIT NOT AVAILABLE WITH

WET LABEL.

UNIT IS AVAILABLE WITH DAMP

LABEL.

1.

2.

LUMINAIRE REQUIREMENTS

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

ALUMINUM, STEEL, THERMOPLASTIC OR

POLYCARBONATE HOUSING.

BRUSHED ALUMINUM, THERMOPLASTIC OR

STEEL STENCIL WITH LETTERS 6 INCHES

TALL AND 3/4" WIDE STROKES AND

PUNCH-OUT FACE, FOR LED'S OR INTERNAL

LED ILLUMINATION.

RED ILLUMINATION PROVIDED BY LIGHT

EMITTING DIODES (LED). APPROXIMATELY

60 LED'S PER FACE. (THIS QUANTITY

DOES NOT APPLY TO INTERNALLY

ILLUMINATED SIGNS.)

CLEAR PROTECTIVE NON-BREAKABLE LENS

TO PROTECT LED'S. (NOT REQUIRED

FOR INTERNALLY ILLUMINATED SIGNS.)

PROVIDE POWER FAILURE, BROWN OUT

PROTECTION AND SURGE PROTECTION.

PROVIDE NI-CAD BATTERY POWER AND

SOLID STATE TYPE CHARGER.

PROVIDE UNIVERSAL ARROWS AND BLANK

OFF PLATES.

PROVIDE SINGLE OR DOUBLE FACE AS

INDICATED.

PROVIDE UNIVERSAL MOUNTING.

UNITS MOUNTED EXPOSED TO THE ELEMENTS

OR IN CLASSIFIED AREAS SHALL HAVE

UL LABEL AS INDICATED.

PROVIDE INTERNAL GREEN GROUNDING

SCREW.

PROVIDE TEST BUTTON IN BOTTOM OF

HOUSING.

PROVIDE INDICATOR LIGHTS IN FACE TO

INDICATE WHEN UNIT IS ON NORMAL

POWER OR ON BATTERY POWER.

HOUSING SHALL HAVE A MATTE BLACK

FINISH, EXCEPT AS INDICATED OTHERWISE.

SKETCH DATE JUNE 2002 STYLE

NL-61

LIGHT EMITTING DIODE EXIT SIGN

12" ± 1"

8" ±

2 3/4" ±

N

ELECTRICAL LIGHTING CALCULATION PLAN

SCALE: 3/16" = 1'-0"

Statistics

Description Avg Max Min Max/Min Avg/Min

101 29.4 fc 40.1 fc 16.6 fc 2.4:1 1.8:1

NL-3, 2' X 4'

E.1

The Walker Group Architecture, Inc PO Box 541, New Bern, NC 28563

252.636.8778 (PHONE)

252.636.8992 (FAX)

WALKER

GROUP

i n c o r p o r a t e d the

ARCHITECTURE

DISCLOSURE OF INFORMATION

CONTRACTOR SHALL COMPLY AS FOLLOWS:

(A) THE CONTRACTOR SHALL NOT RELEASE TO ANYONE OUTSIDE THE CONTRACTOR'S ORGANIZATION ANY UNCLASSIFIED INFORMATION, REGARDLESS OF MEDIUM (E.G., FILM, TAPE, DOCUMENT), PERTAINING TO ANY PART OF THIS CONTRACT OR ANY PROGRAM RELATED TO THIS CONTRACT, UNLESS-

(1) THE CONTRACTING OFFICER HAS GIVEN PRIOR WRITTEN APPROVAL; OR

(2) THE INFORMATION IS OTHERWISE IN THE PUBLIC DOMAIN BEFORE THE DATE OF RELEASE

(B) REQUESTS FOR APPROVAL SHALL IDENTIFY THE SPECIFIC INFORMATION TO BE RELEASED, THE MEDIUM TO BE USED, AND THE PURPOSE FOR THE RELEASE. THE CONTRACTOR SHALL

SUBMIT ITS REQUEST TO THE CONTRACTING OFFICER AT LEAST 45 DAYS BEFORE THE PROPOSED DATE FOR RELEASE.

(C) THE CONTRACTOR AGREES TO INCLUDE A SIMILAR REQUIREMENT IN EACH SUBCONTRACT UNDER HIS CONTRACT. SUBCONTRACTORS SHALL SUBMIT REQUESTS FOR AUTHORIZATION

TO RELEASE THROUGH THE PRIME CONTRACTOR TO THE CONTRACTING OFFICER.

N

TELECOMMUNICATIONS CONSTRUCTION FLOOR PLAN

LEGEND & ABBREVIATIONSGENERAL SPECIAL SYSTEM NOTES

COMBINATION TELEPHONE / DATA JACK

TELECOMMUNICATIONS RISER DIAGRAM

09/03/2020