Attachment 1_Specification-N4008424Q0011.pdf

N4008424Q0011 Attachment 1 18 July 2024

ATTACHMENT 1:

SPECIFICATION - MANDATORY CHARACTERISTICS For Each Item Being Purchased Under this Solicitation

Deviations from the minimum mandatory requirements specified in Attachment 1: Specification – Mandatory Characteristics are NOT allowed for each item being purchased under this solicitation and will be determined nonresponsive and not eligible for award.

ITEM 0001, SEMITRAILER

GENERAL DESCRIPTION

Semi-trailer, flat open bed (without Aori), wooden cargo bed floor shall have manufacturer’s standard position king pin, meet with 1,190mm through 1,210mm fifth wheel coupler height and 9,000kg through 11,500kg fifth coupler loading of truck tractor, semitrailer loading capacity minimum 20,000kg loading capacity, tandem axle, air services brakes and parking brakes. Offerors Proposed Vehicle for Item 0001 meets the General Description provided. YES NO

All equipment shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0001 will be the newest model and year at the time of delivery and ready for use.

YES NO

All vehicle/Equipment and furnished accessories shall comply with JIS (Japanese Industrial Standards) or ISO (International Organization for Standardizations) in effect on the date of manufacture. OFFEROR AGREES: YES NO

VEHICLE REQUIRED & CHARACTERISTICS

(1) Quantity: One (1) each. E/C 0816-00 OFFEROR AGREES: YES NO

(2) MINIMUM DIMENSIONS (Metric/Inches).

OFFEROR’S PROPOSED

SEMI-TRAILER DIMENSIONS

(* To be inserted by offeor.)

Millimeter

Overall Length 12,000 *______________mm “ Width 2,490 * ______________mm “ Height 2,400 *______________mm

MAXIMUM.

Cargo Bed Deck Height (from ground to cargo bed deck):

Within 1,450 *______________mm

(3) Exterior Color: Manufacturer's standard. OFFEROR AGREES: YES NO

(4) Identification Markings and Registration Numbers: Reflective tape dark blue color, and marked on the applicable vehicle license plate. The United States Navy Registration Number 97-53528 is applied. The contractor shall install locally manufactured license plate in rear and plates will be standard 9X17.5 inches, navy blue lettering on white background.

Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. OFFEROR AGREES: YES NO

(5) Rustproofing and undercoating. Manufacturer’s standard. OFFEROR AGREES: YES NO

(6) Electrical System: DC 24volt. OFFEROR AGREES: YES NO

(7) Back Buzzer: Manufacturer's standard. OFFEROR AGREES: YES NO

(8) Spare tire with tire carrier. Manufacturer's standard. OFFEROR AGREES: YES NO

(9) Tool Box: Manufacturer’s standard design, stainless steel shall be installed side of under the cargo bed. OFFEROR

AGREES: YES NO

(10) Front Guard Frame (TORII): Shall be installed in frontend of semi-trailer. Minimum 1,000mm height from cargo bed floor. OFFEROR AGREES: YES NO

(11) Hanger: Manufacturer’s standard design steel framing & steel mesh paneling basket shall be installed right side of under the cargo bed to place approximately 2,500mm length tie. OFFEROR AGREES: YES NO

(12) Tie Down / Rope Hooks: Minimum 23 pairs, 2 ton rated hooks shall be installed both sides of under cargo bed and minimum 4 each shall be installed rear of under the cargo bed. OFFEROR AGREES: YES NO

(13) Recessed Tie Down / Rope Hooks: Minimum 9 pairs, 3 ton rated D design hooks shall be installed on both sides floor of cargo bed and 2 each on rear floor of cargo bed. OFFEROR AGREES: YES NO

(14) Side Marker Lamps: Manufacturer's standard quantities shall be installed. OFFEROR AGREES: YES NO

(15) Tire Marker Lamps: Manufacturer's standard quantities shall be installed. OFFEROR AGREES: YES NO

(16) Tires: Stud less snow tires. OFFEROR AGREES: YES NO

OTHER MISCELLANEOUS REQUIREMENTS

(1) Accessories NOTE: Shall be type installed on manufacturer's standard production model.

(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. The following dealer(s) will provide the warranty work.

a. For Misawa area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery.

OFFEROR AGREES: YES NO

(4) Technical Publications (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual and one (1) set of technical (shop repair) manuals and part catalogs, to be furnished for each consignee by the Contractor at time of delivery. OFFEROR AGREES: YES NO

DELIVERY, INSPECTION, AND ACCEPTANCE

(1) Location. All transportation charges borne by the contractor, One (1) each to the NAVFACFE, Transportation, Misawa detachment (P.O.C is Mr. Fukushi hiroki.fukushi2.ln@us.navy.mil). OFFEROR AGREES: YES NO

(2) DATE. The vehicle shall be delivered at the delivery point specified above within 600 calendar days after delivery order is issued. OFFEROR AGREES: YES NO

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.