REV1 24AUG2023 Attachment 1 SPECIFICATION N4008423Q0024.pdf

N4008423Q0024 Attachment 1: Specification

24 August 2023

ATTACHMENT 1:

SPECIFICATION - MANDATORY CHARACTERISTICS For Each Item Being Purchased Under this Solicitation

Deviations from the minimum mandatory requirements specified in Attachment 1: Specification – Mandatory Characteristics are NOT allowed for each item being purchased under this solicitation and will be determined nonresponsive and not eligible for award.

ITEM 0001, CLEANER, BASIN/MANHOLE VACUUM/HYD TRUCK

GENERAL DESCRIPTION

Cleaner Basin/Manhole, Vacuum/Hydraulic, PTO driven, truck mounted dump hopper, minimum 6.0 m³ receiver tank capacity, short cabin, minimum 2-passenger, right hand drive, manual or automatic transmission and air conditioner. Offerors Proposed Vehicle for Item 0001 meets the General Description provided. YES NO

All vehicles shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0001 meets the General Description provided. YES NO

Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standards, including, but not limited to, exhaust emission control requirement, in effect on the date of manufacture. Offerors Proposed Vehicle for Item 0001 meets the General Description provided.

YES NO

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(1) Quantity: One (1) each. E/C 5409-00 OFFEROR AGREES: YES NO

(2) Minimum Dimensions (Metric).

Millimeter OFFEROR’S PROPOSED

VEHICLE DIMENSIONS

(*To be inserted by offeror.)

Overall Length 6,710 * mm Overall Width 2,200 * mm Overall Height 2,600 * mm

(3) Exterior Color. Manufacturer’s standard. OFFEROR AGREES: YES NO

(4) Identification Markings and Registration Numbers: Not required. OFFEROR AGREES: YES NO

(5) Rustproofing and Undercoating. Manufacturer shall applied optional undercoating around the chassis with certifications and rust proof materials used for suction system (pipelines, hose couplings and valves).

OFFEROR AGREES: YES NO

(6) Engine Displacement. Manufacturer’s standard. OFFEROR AGREES: YES NO

(7) Seat Belt. Shall be installed on all passenger and driver seats. OFFEROR AGREES: YES NO

(8) Speedometer/Odometer/Hour meter. Manufacturer's standard, in kilometer.

(9) AM or AM/FM Radio with Speaker. OFFEROR AGREES: YES NO

(10) Back Eye Camera with Monitor. OFFEROR AGREES: YES NO

(11) Suspension: Manufacturer’s standard. OFFEROR AGREES: YES NO

(12) Electrical System: Manufacturer’s standard. OFFEROR AGREES: YES NO

(13) Backup Alarm. OFFEROR AGREES: YES NO

(14) Tire Marker Lamps. Shall be installed on both sides of rear. OFFEROR AGREES: YES NO

(15) Water Tank and Water Spray System: Manufacturer’s standard capacity and shall have water spray with minimum 10m hose. OFFEROR AGREES: YES NO

(16) Blower System for Vacuum: Manufacturer’s standard. OFFEROR AGREES: YES NO

(17) Working Light: Manufacturer’s standard working light and shall have minimum 10m power cable.

(18) Sludge Suction Hose: Minimum 75mm (3 inch) inner diameter and minimum 10m length (joint of 2 x 5m hoses are also acceptable) hose. OFFEROR AGREES: YES NO

(20) Fire Extinguisher: Manufacturer’s standard shall be installed in the cab.

(23) Safety Device: Manufacturer’s standard. OFFEROR AGREES: YES NO

OTHER MISCELLANEOUS REQUIREMENTS

(1) Accessories Note: Shall be type installed on manufacturer's standard production model.

a. Floor Mats. Manufacturer's standard. OFFEROR AGREES: YES NO

b. Triangle Reflector. OFFEROR AGREES: YES NO

(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer. OFFEROR AGREES: YES NO

The following dealer(s) will provide the warranty work.

a. For Sasebo area:

Name of Firm: *

Address: *

Telephone No.: *

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

(4) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual for each vehicle and one (1) set of technical (shop repair) manuals and parts catalogs to be furnished for consignee by Contractor at time of vehicle(s) delivery.

DELIVERY, INSPECTION, AND ACCEPTANCE

(1) Location: All transportation charges borne by the contractor to the NAVFAC FE, Transportation, Sasebo, Bldg.203 (P.O.C is Mr. Ujiie Junichi.Ujiie.JA@fe.navy.mil). OFFEROR AGREES: YES NO

(2) Date: The vehicle shall be delivered at the delivery point specified above within 540 calendar days after contract is issued. OFFEROR AGREES: YES NO

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified. OFFEROR AGREES: YES NO