REV5_24SEP2020_Attachment 1.pdf

ATTACHMENT 1:

SPECIFICATION - MANDATORY CHARACTERISTICS For Each Item Being Purchased Under this Solicitation

ITEM 0001, SEMITRAILER

GENERAL DESCRIPTION

Semi-trailer, stake, drop 7 sides panels open with rotating pillars, wooden cargo bed floor, minimum 18 ton loading capacity, tandem axle, air services brakes and parking brakes. Offerors Proposed Vehicle for Item 0001 meets the General Description provided. YES NO

All equipment shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0001 will be the newest model and year at the time of delivery and ready for use.

YES NO

All vehicle/Equipment and furnished accessories shall comply with JIS (Japanese Industrial Standards) or ISO (International Organization for Standardizations) in effect on the date of manufacture. OFFEROR AGREES: YES NO

VEHICLE REQUIRED & CHARACTERISTICS

(1) Quantity: One (1) each. E/C 0816-00 OFFEROR AGREES: YES NO

(2) MINIMUM DIMENSIONS (Metric/Inches).

OFFEROR’S PROPOSED

VEHICLE DIMENSIONS

Millimeter Inches

Overall Length 12,000 472.4 ______________mm “ Width 2,460 96.8 ______________mm “ Height 2,950 116.1 ______________mm

Cargo Bed Side Panels Height 600 23.6 ______________mm

(3) Exterior Color: Manufacturer's standard. OFFEROR AGREES: YES NO

(4) Identification Markings and Registration Numbers: Reflective tape dark blue color, and marked on the applicable vehicle license plate. The United States Navy Registration Number 97-52603 is applied. The contractor shall install locally manufactured license plate in rear and plates will be standard 9X17.5 inches, navy blue lettering on white background.

Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. OFFEROR AGREES: YES NO

(5) Rustproofing and undercoating. Manufacturer's standard. OFFEROR AGREES: YES NO

(6) Electrical System: DC 24volt. OFFEROR AGREES: YES NO

(7) Back Buzzer: Manufacturer's standard. OFFEROR AGREES: YES NO

(8) Spare tire with tire carrier. Manufacturer's standard. OFFEROR AGREES: YES NO

(9) Tool Box: Manufacturer’s standard material and design shall be installed side of chassis. OFFEROR AGREES:

YES NO

(10) Hanger: Manufacturer’s standard material and design shall be installed side of chassis. OFFEROR AGREES:

YES NO

(11) Tie Down Hooks. Minimum 16 pairs, recessed type shall be installed on the cargo bed floor. OFFEROR AGREES:

YES NO

(12) Rope Hooks: Manufacturer’s standard quantities shall be installed outside of cargo bed. OFFEROR AGREES:

YES NO

REV5_24SEP2020_Attachment 1

(13) Side Marker Lamps: Manufacturer's standard quantities shall be installed. OFFEROR AGREES: YES NO

(14) Tire Marker Lamps: Manufacturer's standard quantities shall be installed. OFFEROR AGREES: YES NO

(15) Front Guard Frame (TORII): Shall be installed in frontend of trailer and minimum 1,500mm height from bed floor.

OFFEROR AGREES: YES NO

(16) Tires: Manufacturer's standard. OFFEROR AGREES: YES NO

OTHER MISCELLANEOUS REQUIREMENTS

(1) Accessories NOTE: Shall be type installed on manufacturer's standard production model.

(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. The following dealer(s) will provide the warranty work.

a. For Atsugi area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery.

OFFEROR AGREES: YES NO

(4) Technical Publications (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual for each vehicles and one (1) set of technical (shop repair) manuals and part catalogs, to be furnished for each consignee by the Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

DELIVERY, INSPECTION, AND ACCEPTANCE

(1) Location. All transportation charges borne by the contractor, One (1) each to the NAVFACFE, Transportation, Atsugi detachment (P.O.C is Mr. Hughes Steven.Hughes@fe.navy.mil). OFFEROR AGREES: YES NO

(2) DATE. The vehicle shall be delivered at the delivery point specified above within 600 calendar days after delivery order is issued. OFFEROR AGREES: YES NO

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

mailto:Steven.Hughes@fe.navy.mil

ITEM 0002, SEMITRAILER VAN

GENERAL DESCRIPTION

Semi-trailer, aluminum van body, tandem axle, double rear doors, loading capacity minimum 18,000kg, air services brakes and parking brakes. Offerors Proposed Vehicle for Item 0002 meets the General Description provided. YES

NO

All equipment shall be the newest model and year at the time of delivery and ready for use. . Offerors Proposed Vehicle for Item 0002 will be the newest model and year at the time of delivery and ready for use.

YES NO

All vehicle/Equipment and furnished accessories shall comply with JIS (Japanese Industrial Standards) or ISO (International Organization for Standardizations) in effect on the date of manufacture. OFFEROR AGREES: YES NO

VEHICLE REQUIRED & CHARACTERISTICS

(1) Quantity: One (1) each. E/C 0817-00 OFFEROR AGREES: YES NO

(2) MINIMUM DIMENSIONS (Metric/Inches).

OFFEROR’S PROPOSED

VEHICLE DIMENSIONS

Millimeter Inches

Van body inside Length 9,100 358.3 ______________mm “ Width 2,360 92.9 ______________mm “ Height 2,390 94.1 ______________mm

(3) Exterior Color: Manufacturer's standard. OFFEROR AGREES: YES NO

(4) Identification Markings and Registration Numbers: Reflective tape dark blue color, and marked on the applicable vehicle license plate. The United States Navy Registration Number 97-52604 is applied. The contractor shall install locally manufactured license plate in rear and plates will be standard 9X17.5 inches, navy blue lettering on white background.

Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. OFFEROR AGREES: YES NO

(5) Rustproofing and undercoating. Manufacturer's standard. OFFEROR AGREES: YES NO

(6) Electrical System: DC 24volt. OFFEROR AGREES: YES NO

(7) Back Buzzer: Manufacturer's standard. OFFEROR AGREES: YES NO

(8) Spare tire with tire carrier. Manufacturer's standard. OFFEROR AGREES: YES NO

(9) Tool Box. Manufacturer's standard. OFFEROR AGREES: YES NO

(10) Rushing Rails and Belts: Shall be installed 2 pairs on both sides of van body inside and 4 pairs rushing belts.

OFFEROR AGREES: YES NO

(11) Recessed type Tie Down / Rope Hooks: Shall be installed on the floor of cargo bed with approximately 1,000mm pitch. OFFEROR AGREES: YES NO

(12) Room Lamp and Switching System: Shall be installed van body inside. OFFEROR AGREES: YES NO

(13) Side Marker Lamps: Manufacturer's standard quantities shall be installed. OFFEROR AGREES: YES NO

(14) Tire Marker Lamps: Manufacturer's standard quantities shall be installed. OFFEROR AGREES: YES NO

(15) Back Camera and Connecting Cable: Shall be installed top of rear end of van body and the cable shall be connected to existing back monitor where installing inside of truck tractor. The model of back monitor is Clarion CJ-7600. OFFEROR

AGREES: YES NO

(16) Tires: Manufacturer's standard. OFFEROR AGREES: YES NO

OTHER MISCELLANEOUS REQUIREMENTS

(1) Accessories NOTE: Shall be type installed on manufacturer's standard production model.

(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer. Warranty service must be provided within 100-kilometer radius of the delivery point. OFFEROR AGREES: YES NO

a. For Atsugi area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery.

OFFEROR AGREES: YES NO

(4) Technical Publications (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual for each vehicles and one (1) set of technical (shop repair) manuals and part catalogs, to be furnished for each consignee by the Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

DELIVERY, INSPECTION, AND ACCEPTANCE

(1) Location. All transportation charges borne by the contractor, One (1) each to the NAVFACFE, Atsugi Transportation detachment (P.O.C is Mr. Hughes Steven.Hughes@fe.navy.mil) OFFEROR AGREES: YES NO

(2) DATE. The vehicle shall be delivered at the delivery point specified above within 540 calendar days after delivery order is issued. OFFEROR AGREES: YES NO

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place

ITEM 0003, SEMI TRAILER LOW BED

Semi-trailer, flat low bed, loading capacity minimum 19,000kg, drop neck, slant tail, loading ramp, air service brakes and parking brake. Offerors Proposed Vehicle for Item 0003 meets the General Description provided. YES NO

All vehicles shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0003 will be the newest model and year at the time of delivery and ready for use.

YES NO

All vehicle/Equipment and furnished accessories shall comply with JIS (Japanese Industrial Standards) or ISO (International Organization for Standardizations) in effect on the date of manufacture. OFFEROR AGREES: YES NO

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(1) Quantity: One (1) each. E/C 0825-00 OFFEROR AGREES: YES NO

(2) Minimum Dimensions (Metric/Inches).

OFFEROR’S PROPOSED

VEHICLE DIMENSIONS

Millimeter Inches

Overall Length 12,400 488.2 ___________mm “ Width 2,490 98.0 ___________mm Cargo bed Length 9,000 354.3 ___________mm

(3) Maximum

Cargo bed deck height (from ground to cargo bed deck): within 920 mm/36.2” ___________mm

(4) Exterior Color. Manufacturer's standard. OFFEROR AGREES: YES NO

(5) Identification Markings and Registration Numbers. Reflective tape dark blue color, and marked on the applicable vehicle license plate. The United States Navy Registration Number 97-52605 is applied. The contractor shall install locally manufactured license plate in rear and plate will be standard 9X17.5 inches, navy blue lettering on white background. Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. OFFEROR AGREES: YES NO

(6) Rustproofing and Undercoating. Manufacturer’s standard. OFFEROR AGREES: YES NO

(7) Electrical System: DC 24volt. OFFEROR AGREES: YES NO

(8) Back Buzzer: Manufacturer's standard. OFFEROR AGREES: YES NO

(9) Spare tire with tire carrier. OFFEROR AGREES: YES NO

(10) Cargo Bed Floor: Manufacturer's standard tough cargo bed floor that can tolerate the transportation of the construction equipment. . OFFEROR AGREES: YES NO

(11) Side Bumper: Manufacturer's standard. OFFEROR AGREES: YES NO

(12) Side and Tire Marker Lamp: Manufacturer's standard quantities shall be installed.

OFFEROR AGREES: YES NO

(13) Recessed type Tie Down / Rope Hooks: 3ton capacity swivel hooks. Approximately 1,000mm pitch on each side of cargo bed. OFFEROR AGREES: YES NO

(14) Twistable Ring Hook: 3ton capacity. Approximately 1,000mm pitch on edge of each side of cargo bed. OFFEROR

AGREES: YES NO

(15) Side Hook: 3ton capacity. 500mm pitch on edge of each side of body. OFFEROR AGREES: YES NO

(16) Loading ramp: a. 19ton loading capacity. b. Detachable type that can be operated by manually. c. Minimum 500mm ramp width. OFFEROR AGREES: YES NO

(17) Mesh Box: Shall be installed on both sides lower of trailer chassis. OFFEROR AGREES: YES NO

OTHER MISCELLANEOUS REQUIREMENTS

(1) Accessories NOTE: Shall be type installed on manufacturer's standard production model.

(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer. Warranty service must be provided within 100-kilometer radius of the delivery point. OFFEROR AGREES: YES NO

a. For Atsugi area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery.

OFFEROR AGREES: YES NO

(4) Technical Publications (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual for each vehicles and one (1) set of technical (shop repair) manuals and part catalogs, to be furnished for each consignee by the Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

DELIVERY, INSPECTION, AND ACCEPTANCE

(1) Location. All transportation charges borne by the contractor, One (1) each to the NAVFACFE, Atsugi Transportation detachment (P.O.C is Mr. Hughes Steven.Hughes@fe.navy.mil) OFFEROR AGREES: YES NO

(2) DATE. The vehicle shall be delivered at the delivery point specified above within 500 calendar days after delivery order is issued. OFFEROR AGREES: YES NO

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place

ITEM 0004, BACKHOE

Backhoe (Excavator), canopy type, rubber crawler, diesel engine driven. Offerors Proposed Vehicle for Item 0004 meets the General Description provided. YES NO

All vehicles shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0004 will be the newest model and year at the time of delivery and ready for use. YES NO

All vehicle/Equipment and furnished accessories shall comply with JIS (Japanese Industrial Standards) or ISO (International Organization for Standardizations) in effect on the date of manufacture. OFFEROR AGREES: YES NO

MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS

(1) Quantity: One (1) each. E/C 4530-00 OFFEROR AGREES: YES NO

(2) Minimum Dimensions (Metric/Inches).

OFFEROR’S PROPOSED

PERFORMANCE DATA, BUCKET CAPACITY & GVW

Millimeter Inches

Digging Depth 2,300 90.6 ___________mm Reach Height 4,000 157.5 ___________mm (* Both are includes STD capacity shovel)

Standard Capacity Shovel 0.06 ㎥ (New JIS) ___________㎥

MAXIMUM

Machine Operating Weight. Not to Exceed 2,000kg. ___________ Kg

(3) Exterior Color. Manufacturer's standard. OFFEROR AGREES: YES NO

(4) Identification Markings and Registration Numbers. Reflectorized tape or paint dark blue color. The United States Navy Registration Number 45-05839 is applied. The contractor shall install or paint both sides and rear of body. Lettering to include "U. S. NAVY" in 3 inch letters (minimum) on the top, seven-digit USN number for vehicle(s) in 7-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 3inch letters (minimum) centered the bottom of USN number. OFFEROR AGREES: YES NO

(5) Rustproofing and Undercoating. Manufacturer’s standard. OFFEROR AGREES: YES NO

(6) Engine Displacement and Engine Hose Power: Manufacturer's standard minimum 16PS. OFFEROR AGREES:

YES NO

OTHER MISCELLANEOUS REQUIREMENTS

(1) Accessories Note: Shall be type installed on manufacturer's standard production model.

a. Hydraulic impact hammers with hydraulic piping connections. OFFEROR AGREES: YES NO

b. Less than 350mm width bucket. OFFEROR AGREES: YES NO

c. More than 500mm width bucket. OFFEROR AGREES: YES NO

(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. The following dealer(s) will provide the warranty work.

a. For Sasebo area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery.

OFFEROR AGREES: YES NO

(4) Technical Publications (In Japanese and CD or CD ROM is acceptable): One (1) set of operator manual for each vehicles and one (1) set of technical (shop repair) manuals and part catalogs, to be furnished for each consignee by the Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

(1) Location. All transportation charges borne by the contractor, One (1) each to the NAVFAC FE, Transportation, Sasebo, Bldg.203 (P.O.C is Mr. Ujiie Junichi.Ujiie.JA@fe.navy.mil). OFFEROR AGREES: YES NO

(2) DATE. The vehicle shall be delivered at the delivery point specified above within 180 calendar days after delivery

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place mailto:Junichi.Ujiie.JA@fe.navy.mil

ITEM 0005, AERIAL PLATFORM

Aerial platform, self-propelled, wheel mounted, diesel engine driven, telescopic boom, operator controls on platform, minimum 14m working height, minimum 250kg (551 LBS) platform capacity. Offerors Proposed Vehicle for Item 0005 meets the General Description provided. YES NO

All equipment shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0005 will be the newest model and year at the time of delivery and ready for use. YES NO

All vehicle/Equipment and furnished accessories shall comply with JIS (Japanese Industrial Standards) or ISO (International Organization for Standardizations) in effect on the date of manufacture. OFFEROR AGREES: YES NO

(a) Quantity: One (1) each. E/C 5460-40

B. MINIMUM DIMENSIONS (Metric/Inches). OFFEROR’S PROPOSED

EQUIPMENT DIMENSIONS & WORKING RADIUS

Millimeter Inches

Overall Length 7,700 303.2 __________Millimeter “ Width 2,300 90.6 __________Millimeter

Maximum Working Radius: 12 meter ______________Meters

C. REQUIREMENTS.

(1) Exterior Color: Manufacturer's standard color. OFFEROR AGREES: YES NO

(2) Identification Markings and Registration Numbers: Not required. OFFEROR AGREES: YES NO

(3) Rustproofing and Undercoating: Manufacturer's standard. OFFEROR AGREES: YES NO

(4) Electrical Systems: Manufacturer's standard. OFFEROR AGREES: YES NO

(5) Engine Displacement: Manufacturer’s standard. OFFEROR AGREES: YES NO

(6) Lifting Eye: Minimum 4 each shall be installed on chassis. OFFEROR AGREES: YES NO

(7) Safety Devices: Manufacturer's standard. OFFEROR AGREES: YES NO

(8) Operator Control Panels and Other Caution Plates: Shall have in English notations. OFFEROR AGREES: YES NO

OTHER MISCELLANEOUS REQUIREMENTS

NOTE: Shall be type installed on manufacturer's standard production model.

(a) Head lights: Shall be installed on body. OFFEROR AGREES: YES NO

(b) Working lights: Shall be installed on platform. OFFEROR AGREES: YES NO

(c) Protection Boots for hydraulic cylinders, upper and lower. OFFEROR AGREES: YES NO

(d) Bucket control protection clear cover. OFFEROR AGREES: YES NO

(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. The following dealer(s) will provide the warranty work.

a. For Sasebo area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery.

OFFEROR AGREES: YES NO

(4) Technical Publications (CD or CD ROM is acceptable): One (1) set of in English and Japanese operator manual for each equipment and one (1) set of in Japanese technical (shop repair) manuals and part catalogs, to be furnished for each consignee by the Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

(1) Location. All transportation charges borne by the contractor, One (1) each to the NAVFAC FE, Transportation,

(2) DATE. The vehicle shall be delivered at the delivery point specified above within 230 calendar days after delivery

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place

ITEM 0006, AERIAL PLATFORM

Aerial platform, self-propelled, wheel mounted, diesel engine driven, telescopic boom, operator controls on platform, minimum 20m working height, minimum 250kg (551 LBS) platform capacity. Offerors Proposed Vehicle for Item 0006 meets the General Description provided. YES NO

All equipment shall be the newest model and year at the time of delivery and ready for use. Offerors Proposed Vehicle for Item 0006 will be the newest model and year at the time of delivery and ready for use. YES NO

All vehicle/Equipment and furnished accessories shall comply with JIS (Japanese Industrial Standards) or ISO (International Organization for Standardizations) in effect on the date of manufacture. OFFEROR AGREES: YES NO

(a) Quantity: One (1) each. E/C 5460-60

B. MINIMUM DIMENSIONS (Metric/Inches). OFFEROR’S PROPOSED

EQUIPMENT DIMENSIONS & WORKING RADIUS

Millimeter Inches

Overall Length 10,000 393.7 __________Millimeter “ Width 2,400 94.5 __________Millimeter

Maximum Working Radius: 17 meter ______________Meters

C. REQUIREMENTS.

(1) Exterior Color: Manufacturer's standard color. OFFEROR AGREES: YES NO

(2) Identification Markings and Registration Numbers: Not required. OFFEROR AGREES: YES NO

(3) Rustproofing and Undercoating: Manufacturer's standard. OFFEROR AGREES: YES NO

(4) Electrical Systems: Manufacturer's standard. OFFEROR AGREES: YES NO

(5) Engine Displacement: Manufacturer’s standard. OFFEROR AGREES: YES NO

(6) Lifting Eye: Minimum 4 each shall be installed on chassis. OFFEROR AGREES: YES NO

(7) Safety Devices: Manufacturer's standard. OFFEROR AGREES: YES NO

(8) Operator Control Panels and Other Caution Plates: Shall have in English notations. OFFEROR AGREES: YES NO

OTHER MISCELLANEOUS REQUIREMENTS

NOTE: Shall be type installed on manufacturer's standard production model.

(e) Head lights: Shall be installed on body. OFFEROR AGREES: YES NO

(f) Working lights: Shall be installed on platform. OFFEROR AGREES: YES NO

(g) Protection Boots for hydraulic cylinders, upper and lower. OFFEROR AGREES: YES NO

(h) Bucket control protection clear cover. OFFEROR AGREES: YES NO

(2) Warranty: No less than the manufacturer’s most favorable commercial warranties given to any Customer and the garage or maintenance dealer(s) shall be within a 100-kilometer radius of the delivery point. The following dealer(s) will provide the warranty work.

a. For Sasebo area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(3) Certificate of Transfer for each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery.

OFFEROR AGREES: YES NO

(4) Technical Publications (CD or CD ROM is acceptable): One (1) set of in English and Japanese operator manual for each equipment and one (1) set of in Japanese technical (shop repair) manuals and part catalogs, to be furnished for each consignee by the Contractor at time of vehicle(s) delivery. OFFEROR AGREES: YES NO

(1) Location. All transportation charges borne by the contractor, One (1) each to the NAVFAC FE, Transportation,

(2) DATE. The vehicle shall be delivered at the delivery point specified above within 230 calendar days after delivery

(3) Inspection and Acceptance. Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place