N4008418T0002_DRAFT_Specifications_for_FY18_Procurement_of_Vehicles_for_NAVFAC_FE.pdf

SPECIFICATIONS FOR ITEM 0001, MINI CARGO PICKUP TRUCK

A. ITEM. 0001.

Truck, cargo pickup, miniature, 4X2, gasoline engine driven, right hand drive, drop three sides of cargo bed, automatic transmission and air conditioner.

(a) Quantity Seventeen (17) each. E/C 0319-MJ

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. MINIMUM DIMENSIONS (Metric/Inches).

Millimeter Inches

Overall Length 3,395 133.7 " Width 1,475 58.1 " Height 1,715 67.5

Max. Payload 350 Kg 772 lbs.

C. REQUIREMENTS.

(1) Exterior Color: Manufacturer's standard gloss white color.

(2) Identification Markings and Registration Numbers (Not required for Sasebo’s): Reflecterized tape dark blue color, and marked on the applicable vehicle license plate. NAVFACFE, PW7 will provide United States Navy Registration Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background. Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. Both front and rear license plates are required.

(3) Rust proofing and Undercoatings: Manufacturer’s standard.

(4) Engine Displacement. Minimum 650 cc gasoline engine driven.

(5) Seat Belts. Shall be installed on all passenger seats and driver's seat.

(6) Transmission. Automatic transmission.

(7) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(8) Floor Mats.

(9) Triangle Reflector.

(10) Warranty: Manufacturer's standard at least 12 months. Following dealers will provide the warranty work.

a. For Yokosuka area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(11) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) certificate of transfer for each vehicle, one (1) set of operator manual for each vehicle, and one (1) set of technical (shop repair) manuals and parts catalogs , to be furnished for consignee by Contractor at time of vehicle(s) delivery.

(12) Accessories: Shall be type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, Seventeen (17) each to the NAVFACFE, Transportation, Yokosuka (P.O.C is Mr. Hamano, Masakazu, Tel 046-(816)-3197, Email:

Masakazu.Hamano.JA@fe.navy.mil).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the DFARS clauses 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (JUNE 2012) and 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013).

SPECIFICATIONS FOR ITEM 0002 - 0004, TRUCK CARGO PICKUP COMP

A. ITEM. 0002 - 0004.

Truck, cargo pickup, compact, 4X2, gasoline engine driven, right hand drive, automatic transmission, and air conditioner.

(a) Quantity Eight (8) each. E/C 0319-RH

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. DIMENSIONS (Metric/Inches).

(1) MINIMUM

Millimeter Inches

Overall Length 4,300 169.3 " Width 1,690 66.5 " Height 1,800 70.9

Cargo Bed Inside Length: 2,470 97.2 “ “ “ Width: 1,600 63.0

Cargo Loading Capacity 900 kg 1,984 lbs.

(2) MAXIMUM.

Cargo Loading Capacity 1,250kg 2,756 lbs.

C. REQUIREMENTS.

(1) Exterior Color: Manufacturer's standard gloss white color.

(2) Identification Markings and Registration Numbers (Not required for Sasebo’s): Reflecterized tape dark blue color, and marked on the applicable vehicle license plate. NAVFACFE, PW7 will provide United States Navy Registration Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background. Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. Both front and rear license plates are required.

(3) Rust proofing and Undercoating: Manufacturer’s standard and completely by the manufacturer to the maximum level available for Okinawa.

(4) Engine Displacement: 1,780 cc or more gasoline engine driven.

(5) Seat Belts: Shall be installed on all passenger seats and driver's seat.

(6) Transmission System: Automatic Transmission.

(7) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(8) Single Rear Tires.

(9) AM or AM/FM Radio with Speaker.

(10) Floor Mats.

(11) Triangle Reflector.

(12) Warranty: Manufacturer's standard at least 12 months. Following dealers will provide the warranty work.

a. For Yokosuka area Item 0002:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

b. For Atsugi area Item 0003:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

c. For Okinawa area Item 0004:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(13) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) certificate of transfer for each vehicle, one (1) set of operator manual for each vehicle, and one (1) set of technical (shop repair) manuals and parts catalogs , to be furnished for consignee by Contractor at time of vehicle(s) delivery.

(14) Accessories: Shall be type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, Six (6) each to the NAVFACFE, Transportation, Yokosuka (P.O.C is Mr. Hamano, Masakazu, Tel 046-(816)-3197, Email:

Masakazu.Hamano.JA@fe.navy.mil), One (1) each to the NAVFACFE, Transportation, Atsugi detachment (P.O.C is Mr. Hughes, Steven, Tel 0467-(63)-3554, Email: Steven.Hughes@fe.navy.mil ).and One (1) each to the NAVFACFE, Transportation, Okinawa detachment, Bldg.3571 (P.O.C is Ms.

Hokama, Rei, Tel 098-(961)-8215, Email: rei.hokama.JA@fe.navy.mil).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 90 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the

SPECIFICATIONS FOR ITEM 0005, TRUCK CARGO PICKUP COMP 4x4

A. ITEM. 0005.

Truck, cargo pickup, compact, 4X4, gasoline engine driven, right hand drive, automatic transmission, and air conditioner.

(a) Quantity One (1) each. E/C 0321-RH

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. DIMENSIONS (Metric/Inches).

(1) MINIMUM

Millimeter Inches

Overall Length 4,300 169.3 " Width 1,690 66.5 " Height 1,800 70.9

Cargo Bed Inside Length: 2,470 97.2 “ “ “ Width: 1,600 63.0

Cargo Loading Capacity 900 kg 1,984 lbs.

(2) MAXIMUM.

Cargo Loading Capacity 1,250kg 2,756 lbs.

(1) Exterior Color: Manufacturer's standard gloss white color.

(2) Identification Markings and Registration Numbers (Not required for Sasebo’s): Reflecterized tape

United States Navy Registration Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background. Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch

(3) Rust proofing and Undercoating: Manufacturer’s standard.

(4) Engine Displacement: Minimum 1,780 cc gasoline engine driven.

(5) Seat Belts: Shall be installed on all passenger seats and driver's seat.

(6) Transmission System: Automatic Transmission.

(7) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(8) Single Rear Tires.

(9) AM or AM/FM Radio with Speaker.

(10) Floor Mats.

(11) Triangle Reflector.

(12) Warranty: Manufacturer's standard at least 12 months. Following dealers will provide the warranty work.

a. For Atsugi area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(14) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) certificate of transfer for each vehicle, one (1) set of operator manual for each vehicle, and one (1) set of technical (shop repair) manuals and parts catalogs , to be furnished for consignee by Contractor at time of vehicle(s) delivery.

(14) Accessories: Shall be type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, One (1) each to the NAVFACFE, Transportation, Atsugi detachment (P.O.C is Mr. Hughes, Steven, Tel 0467-(63)-3554, Email: Steven.Hughes@fe.navy.mil ).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 90 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the

SPECIFICATIONS FOR ITEM 0006 - 0009, 6 PASSENGER CARGO PICKUP TRUCK

A. ITEM. 0006 - 0009.

Truck, cargo pickup, 4X2, gasoline engine driven, 4 door, 6 passenger, right hand drive, drop three (3) sides of flat cargo bed, automatic transmission, and air conditioner.

(a) Quantity: Fifteen (15) each. E/C 0327-RH

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. DIMENSIONS (Metric/Inches).

(1) MINIMUM

Millimeter Inches Overall Length 4,680 184.3 " Width 1,690 66.5 " Height 1,960 77.2 Cargo Bed:

Inside Length 2,090 82.3 " Width 1,600 63.0

Cargo Loading Capacity 950 kg 2,094 lbs.

(2) MAXIMUM.

Cargo Loading Capacity 1,250kg 2,756 lbs.

(1) Exterior Color: Manufacturer’s standard gloss white color.

(2) Identification Markings and Registration Numbers(Not required for Sasebo’s): Reflecterized tape

United States Navy Registration Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background. Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch the maximum level available for Okinawa.

(4) Engine Displacement: 1,800 cc rated or more gasoline engine driven.

(5) Seat Belt: Shall be installed on all passenger's seats.

(6) Transmission System: Automatic Transmission.

(7) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(8) AM or AM/FM Radio with Speaker.

(9) Floor Mats.

(10) Tires: Manufacturer's standard.

(11) Triangle Reflector.

(12) Warranty: Manufacturer's standard at least 12 months. Following dealers will provide the warranty work.

a. For Yokosuka area Item 0006:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

b. For Atsugi area Item 0007:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

c. For Sasebo area Item 0008:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

d. For Okinawa area Item 0009:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(14) Technical Publication (In Japanese and CD or CD ROM is acceptable):

One (1) certificate of transfer for each vehicle, one (1) set of operator manual for each vehicle, and one

(1) set of technical (shop repair) manuals and parts catalogs , to be furnished for consignee by Contractor at time of vehicle(s) delivery.

(15) Accessories: Shall be type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, Three (3) each to the NAVFACFE, Transportation, Yokosuka (P.O.C is Mr. Hamano, Masakazu, Tel 046-(816)-3197, Email:

Masakazu.Hamano.JA@fe.navy.mil), Five (5) each to the NAVFACFE, Transportation, Atsugi detachment (P.O.C is Mr. Hughes, Steven, Tel 0467-(63)-3554, Email: Steven.Hughes@fe.navy.mil ), Four (4) each to the NAVFAC FE, Transportation, Sasebo, Bldg.203 (P.O.C is Mr. Ujiie, Junichi, Tel 0956-(50)-3534, Email: Junichi.Ujiie.JA@fe.navy.mil) and Three (3) each to the NAVFACFE, Transportation, Okinawa detachment, Bldg.3571 (P.O.C is Ms. Hokama, Rei, Tel 098-(961)-8215, Email:

rei.hokama.JA@fe.navy.mil).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the DFARS clauses 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

NAVFAC_ACQ_INV@fe.navy.mil

SPECIFICATIONS FOR ITEM 0010, 6 PASSENGER CARGO PICKUP TRUCK

A. ITEM. 0010.

Truck, cargo pickup, 4X2, gasoline engine driven, 4 door, 6 passenger, right hand drive, drop three (3) sides of flat cargo bed, automatic transmission, and air conditioner.

(a) Quantity: Five (5) each. E/C 0327-RH

Note: Vehicle/Equipment and furnished accessories shall comply with Cold Climate Specification or equivalent and Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. DIMENSIONS (Metric/Inches).

(1) MINIMUM

Millimeter Inches Overall Length 4,680 184.3 " Width 1,690 66.5 " Height 1,960 77.2 Cargo Bed:

Inside Length 2,090 82.3 " Width 1,600 63.0

Cargo Loading Capacity 950 kg 2,094 lbs.

(2). MAXIMUM.

Cargo Loading Capacity 1,250kg 2,756 lbs.

(2) Identification Markings and Registration Numbers: Reflecterized tape dark blue color, and marked on the applicable vehicle license plate. NAVFACFE, PW7 will provide United States Navy Registration Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background.

Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes.

Both front and rear license plates are required.

(4) Engine Displacement: 1,800 cc rated or more gasoline engine driven.

(5) Seat Belt: Shall be installed on all passenger's seats.

(6) Transmission System: Automatic Transmission.

(7) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(10) Tires: Stud less snow tire.

(11) Triangle Reflector.

(12) Warranty: Manufacturer's standard at least 12 months. Following dealers will provide the warranty work.

a. For Misawa area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(13) Technical Publication (In Japanese and CD or CD ROM is acceptable):

One (1) certificate of transfer for each vehicle, one (1) set of operator manual for each vehicle, and one

(1) set of technical (shop repair) manuals and parts catalogs , to be furnished for consignee by Contractor at time of vehicle(s) delivery.

(14) Accessories: Shall be type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, Five (5) each to the NAVFACFE, Transportation, Misawa detachment (P.O.C is Mr. Fukushi, Hiroki, Tel 0176-(77)-4036, Email: Hiroki.Fukushi.JA@fe.navy.mil).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the DFARS clauses 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

NAVFAC_ACQ_INV@fe.navy.mil

SPECIFICATIONS FOR ITEM 0011 - 0013, 4 PASSENGER PANEL VAN MINI

A. ITEM. 0011 - 0013.

Truck, van, panel, forward control, miniature, 4X2, gasoline engine driven, 5 door, 4 passenger, right hand drive, windows all sides, Hi Roof type, automatic transmission and air conditioner.

(a) Quantity: Eight (8) each. E/C 0329-MJ

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. MINIMUM DIMENSIONS (Metric/Inches).

Millimeter Inches

Overall Length 3,395 133.7 " Width 1,475 58.1 " Height 1,815 71.5

Cargo loading capacity: 350 kg (113 lbs).

(2) Identification Markings and Registration Numbers (Not required for Sasebo’s): Reflecterized tape

United States Navy Registration Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background. Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch

(4) Engine Displacement: Minimum 650 cc gasoline engine driven.

(5) Transmission System: Automatic Transmission.

(6) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(7) Tires: Manufacturer's standard.

(8) AM or AM/FM Radio with Speaker.

(9) Seats: Manufacturer's standard.

(10) Rear Under Mirror or Rear Corner Sensor or Back Eye Camera with Monitor.

(11) Seat Belts: Shall be installed on all passenger seats and driver's seat.

(12) Floor Mats: Both fronts, rear and rear luggage compartment.

(13) Rear Sides Windows: Shall be open and closeable.

(14) Triangle Reflector.

(15) Warranty: Manufacturer's standard at least 12 months. Following dealers will provide the warranty work.

a. For Yokosuka area Item 0011:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

b. For Atsugi area Item 0012:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

c. For Sasebo area Item 0013:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(16) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) certificate of transfer for each vehicle, one (1) set of operator manual for each vehicle, and one (1) set of technical (shop repair) manuals and parts catalogs , to be furnished for consignee by Contractor at time of vehicle(s) delivery.

(17) Accessories: Shall be type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, Three (3) each to the NAVFACFE, Transportation, Yokosuka (P.O.C is Mr. Hamano, Masakazu, Tel 046-(816)-3197, Email:

Masakazu.Hamano.JA@fe.navy.mil), Four (4) each to the NAVFACFE, Transportation, Atsugi detachment (P.O.C is Mr. Hughes, Steven, Tel 0467-(63)-3554, Email: Steven.Hughes@fe.navy.mil ) and One (1) each to the NAVFAC FE, Transportation, Sasebo, Bldg.203 (P.O.C is Mr. Ujiie, Junichi, Tel 0956-(50)-3534, Email: Junichi.Ujiie.JA@fe.navy.mil).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the

SPECIFICATIONS FOR ITEM 0014, 4 PASSENGER PANEL VAN MINI

A. ITEM. 0014.

Truck, van, panel, forward control, miniature, 4X4, gasoline engine driven, 5 door, 4 passenger, right hand drive, windows all sides, Hi Roof type, automatic transmission and air conditioner.

(a) Quantity: One (1) each. E/C 0329-M4

Note: Vehicle/Equipment and furnished accessories shall comply with Cold Climate Specification or equivalent and Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. MINIMUM DIMENSIONS (Metric/Inches).

Millimeter Inches

Overall Length 3,395 133.7 " Width 1,475 58.1 " Height 1,815 71.5

Cargo loading capacity: 350 kg (113 lbs).

(2) Exterior Color: Manufacturer’s standard gloss white color.

(2) Identification Markings and Registration Numbers: Reflecterized tape dark blue color, and marked

Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background.

Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY,

(4) Engine Displacement: Minimum 650 cc gasoline engine driven.

(5) Transmission System: Automatic Transmission.

(6) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(7) Tires: Stud less snow tire.

(8) AM or AM/FM Radio with Speaker.

(9) Seats: Manufacturer's standard.

(10) Rear Under Mirror or Rear Corner Sensor or Back Eye Camera with Monitor.

(11) Seat Belts: Shall be installed on all passenger seats and driver's seat.

(12) Floor Mats: Both fronts, rear and rear luggage compartment.

(13) Rear Sides Windows: Shall be open and closeable.

(15) Warranty: Manufacturer's standard at least 12 months. Following dealers will provide the warranty work.

a. For Misawa area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(16) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) certificate of transfer for each vehicle, one (1) set of operator manual for each vehicle, and one (1) set of technical (shop repair) manuals and parts catalogs , to be furnished for consignee by Contractor at time of vehicle(s) delivery.

(17) Accessories: Shall be type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, One (1) each to the NAVFACFE, Transportation, Misawa detachment (P.O.C is Mr. Fukushi, Hiroki, Tel 0176-(77)-4036, Email: Hiroki.Fukushi.JA@fe.navy.mil).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the

SPECIFICATIONS FOR ITEM 0015 - 0018, TRUCK VAN PANEL.

A. ITEM 0015 - 0018.

Truck, van, panel, forward control, 4X2, gasoline engine, 5 door, 3/6 passenger, right hand drive, windows all sides, automatic transmission, and air conditioner.

(a) Quantity: Nineteen (19) each. E/C 0329-RH

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. MINIMUM DIMENSIONS (Metric/Inches).

Millimeter Inches

Overall Length 4,690 184.6 " Width 1,690 66.5 " Height 1,950 76.2

Payload (3/6 pass) 1,000/850 kg 2,205/1,874 lbs

C. REQUIREMENTS.

(1) Exterior Color: Manufacturer’s standard gloss white color.

(2) Identification Markings and Registration Numbers (Not required for Sasebo’s): Reflecterized tape dark blue color, and marked on the applicable vehicle license plate. NAVFACFE, PW7 will provide United States Navy Registration Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background. Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. Both front and rear license plates are required.

(3) Rust proofing and Undercoating: Manufacturer’s standard and completely by the manufacturer to the maximum level available for Okinawa.

(4) Engine Displacement. Minimum 1,900 cc gasoline engine driven.

(5) Seat Belts. Shall be installed on all passenger seats.

(6) Door Lock System: Central controlled electric driven for all doors.

(7) Transmission System: Automatic Transmission.

(8) Power windows. Windows of both sides front doors.

(9) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(10) Rear Under Mirror.

(11) Slide Rear Windows: For both sides of rear windows.

(12) AM or AM/FM Radio with Speaker.

(13) Floor Mats. Front, rear and rear luggage compartment.

(15) Warranty: Manufacturer's standard at least 12 months. Following dealers will provide the warranty work.

a. For Yokosuka area Item 0015:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

b. For Atsugi Item 0016:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

a. For Sasebo Item 0017:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

b. For Okinawa area Item 0018:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(16) Technical Publications (In Japanese and CD or CD ROM is acceptable): One (1) certificate of transfer for each vehicle, one (1) set of operators manual for each vehicle, and one (1) set of Technical (shop repair) manuals, and parts catalogs, to be furnished for consignee by Contractor at time of vehicle(s) delivery.

(17) Accessories. Shall be type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, Three (3) each to the NAVFACFE, Transportation, Yokosuka (P.O.C is Mr. Hamano, Masakazu, Tel 046-(816)-3197, Email:

Masakazu.Hamano.JA@fe.navy.mil), Six (6) each to the NAVFACFE, Transportation, Atsugi detachment (P.O.C is Mr. Hughes, Steven, Tel 0467-(63)-3554, Email: Steven.Hughes@fe.navy.mil ), Four (4) each to the NAVFAC FE, Transportation, Sasebo, Bldg.203 (P.O.C is Mr. Ujiie, Junichi, Tel 0956-(50)-3534, Email: Junichi.Ujiie.JA@fe.navy.mil) and Six (6) each to the NAVFACFE, Transportation, Okinawa detachment, Bldg.3571 (P.O.C is Ms. Hokaman, Rei, Tel 098-(961)-8215, Email:

rei.hokama.JA@fe.navy.mil).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 90 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the

SPECIFICATIONS FOR ITEM 0019, TRUCK VAN PANEL.

A. ITEM 0019.

Truck, van, panel, forward control, 4X4, gasoline engine, 5 door, 3/6 passenger, right hand drive, windows all sides, automatic transmission, and air conditioner.

(a) Quantity: One (1) each. E/C 0329-R4

Note: Vehicle/Equipment and furnished accessories shall comply with Cold Climate Specification or equivalent and Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. MINIMUM DIMENSIONS (Metric/Inches).

Millimeter Inches

Overall Length 4,690 184.6 " Width 1,690 66.5 " Height 1,950 76.2

Payload (3/6 pass) 1,000/850 kg 2,205/1,874 lbs

C. REQUIREMENTS.

(1) Exterior Color: Manufacturer’s standard gloss white color.

(2) Identification Markings and Registration Numbers: Reflecterized tape dark blue color, and marked on the applicable vehicle license plate. NAVFACFE, PW7 will provide United States Navy Registration Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background.

Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. Both front and rear license plates are required.

(3) Rust proofing and Undercoating: Manufacturer’s standard.

(4) Engine Displacement. Minimum 1,900 cc gasoline engine driven.

(5) Seat Belts. Shall be installed on all passenger seats.

(6) Door Lock System: Central controlled electric driven for all doors.

(7) Transmission System: Automatic Transmission.

(8) Power windows. Windows of both sides front doors.

(9) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(10) Rear Under Mirror.

(11) Slide Rear Windows: For both sides of rear windows.

(12) Tire: Stud less Snow Tire.

(13) AM or AM/FM Radio with Speaker.

(14) Floor Mats. Front, rear and rear luggage compartment.

(15) Triangle Reflector.

(16) Warranty: Manufacturer's standard at least 12 months. Following dealers will provide the warranty work.

a. For Misawa area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(17) Technical Publications (In Japanese and CD or CD ROM is acceptable): One (1) certificate of transfer for each vehicle, one (1) set of operators manual for each vehicle, and one (1) set of Technical (shop repair) manuals, and parts catalogs, to be furnished for consignee by Contractor at time of vehicle(s) delivery.

(18) Accessories. Shall be type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, One (1) each to the NAVFACFE, Transportation, Misawa detachment (P.O.C is Mr. Fukushi, Hiroki, Tel 0176-(77)-4036, Email: Hiroki.Fukushi.JA@fe.navy.mil).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 90 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the

SPECIFICATIONS FOR ITEM 0020 TRUCK STAKE 3.0 TON

A. ITEM. 0020

Truck, stake, 4X2, diesel engine, right hand drive, minimum 3.0 ton capacity, drop 3 sides of flat cargo bed with hydraulic tail gate, automatic transmission, and air conditioner.

(1) Quantity: One (1) each. E/C 0343-RH

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. MINIMUM DIMENSIONS (Metric/Inches).

Millimeter Inches Cargo Bed Inside:

Length 4,350 171.3 Width 2,070 81.5 Height 380 15.0

Cargo loading capacity: 3,000kg 6,614lbs

Hydraulic Tail Gate Lifter Payload: 600kg / 1,323lbs.

" “ “ “ Length: 800mm / 31.5 inches.

(2) Identification Markings and Registration Numbers: Identification Markings and Registration Numbers: Reflecterized tape dark blue color, and marked on the applicable vehicle license plate.

NAVFACFE, PW7 will provide United States Navy Registration Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background. Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. Both front and rear license plates are required.

(3) Rust proofing and Undercoating: Manufacturer's standard.

(4) Engine Displacement: Manufacturer's standard model.

(5) Transmission System: Automatic Transmission.

(6) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(7) Seat Belts: Shall be installed on all passenger seats and driver's seat.

(8) AM or AM/FM Radio with Speaker.

(9) Tires: Manufacturer's standard.

(12) Warranty: Manufacturer's standard at least 12 months. The Following dealer will provide the warranty work.

a. For Atsugi area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(13) Technical Publications (In Japanese and CD or CD ROM is acceptable): One (1) certificate of transfer for each vehicle, one (1) set of operator manual, for each vehicles and one (1) set of technical (shop repair) manual and parts catalog, to be furnished for each consignee by the Contractor at time of vehicle(s) delivery.

(14) Accessories: Shall be the type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, One (1) each to the NAVFACFE, Transportation, Atsugi detachment (P.O.C is Mr. Hughes, Steven, Tel 0467-(63)-3554, Email: Steven.Hughes@fe.navy.mil).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after delivery order is issued

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the

SPECIFICATIONS FOR ITEM 0021 TRUCK STAKE 2.0 TON

A. ITEM. 0021

Truck, stake, 4X2, diesel engine, 4 door, right hand drive, minimum 2.0 ton capacity, drop 3 sides of flat cargo bed with hydraulic tail gate, automatic transmission, and air conditioner.

(1) Quantity: One (1) each. E/C 0343-03

Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. MINIMUM DIMENSIONS (Metric/Inches).

Millimeter Inches Cargo Bed Inside:

Length 3,300 129.9 Width 1,850 72.8 Height 380 15.0

Cargo loading capacity: 2,000kg 4,409lbs

Hydraulic Tail Gate Lifter Payload: 600kg / 1,323lbs.

" “ “ “ Length: 800mm / 31.5 inches.

C. REQUIREMENTS.

(1) Exterior Color: Manufacturer’s standard gloss white color.

(2) Identification Markings and Registration Numbers: Reflecterized tape dark blue color, and marked on the applicable vehicle license plate. NAVFACFE, PW7 will provide United States Navy Registration Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background.

Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY, and "FOR OFFICIAL USE ONLY" in 1/2-inch letters (minimum) centered between the bottom holes. Both front and rear license plates are required.

(3) Rust proofing and Undercoating: Manufacturer's standard model.

(4) Engine Displacement: Manufacturer's standard model.

(5) Transmission System: Automatic Transmission.

(6) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(7) Seat Belts: Shall be installed on all passenger seats and driver's seat.

(8) AM or AM/FM Radio with Speaker.

(9) Tires: Manufacturer's standard.

warranty work.

a. For Atsugi area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(13) Technical Publications (In Japanese and CD or CD ROM is acceptable): One (1) certificate of transfer for each vehicle, one (1) set of operator manual, for each vehicles and one (1) set of technical (shop repair) manual and parts catalog, to be furnished for each consignee by the Contractor at time of vehicle(s) delivery.

(14) Accessories: Shall be the type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, One (1) each to the NAVFACFE, Transportation, Atsugi detachment (P.O.C is Mr. Hughes, Steven, Tel 0467-(63)-3554, Email: Steven.Hughes@fe.navy.mil ).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after delivery order is issued

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the

SPECIFICATIONS FOR ITEM 0022, 6 PASSENGER CARGO PICKUP TRUCK

A. ITEM. 0022.

Truck, cargo pickup, crew cab, 4X4, 4 door, 6 passenger, right hand drive, automatic transmission, and air conditioner.

(1) Quantity: Three (3) each. E/C 0355-RH

Note: Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. DIMENSIONS (Metric/Inches).

(1) MINIMUM

Millimeter Inches

Overall Length 4,600 181.1 " Width 1,600 63.0 " Height 1,800 70.9 Cargo Bed:

Inside Length 2,085 82.1 " Width 1,600 63.0

Cargo loading capacity: 950 kg (2,094 lbs).

(2) MAXIMUM

Cargo loading capacity: 1,250 kg (2,756 lbs).

(2) Identification Markings and Registration Numbers: Reflecterized tape dark blue color, and marked

Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background.

Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY,

(4) Engine Displacement: Manufacturer’s standard.

(5) Seat Belt: Shall be installed on all passenger’s seats.

(6) Transmission System: Automatic Transmission.

(7) Speedometer/Odometer: Manufacturer's standard (in kilometer).

(10) Tire: Manufacturer’s standard.

(12) Warranty: Manufacturer's standard at least 12 months. The following dealer will provide the warranty work.

a. For Atsugi area:

Name of Firm: *_________________________________________________

Address: *______________________________________________________

Telephone No.: *________________________________________________

(*) to be inserted by contractor.

(13) Technical Publication (In Japanese and CD or CD ROM is acceptable): One (1) certificate of transfer for each vehicle, one (1) set of operator manual, for each vehicles and one (1) set of technical (shop repair) manuals and part catalogs, to be to be furnished for each consignee by the Contractor at time of vehicle(s) delivery.

(14) Accessories: Shall be type installed on manufacturer's standard production model.

D. INTENDED USE: The U. S. Government in transporting personnel/cargo intends. The vehicle shall be NEW and of the newest model and year at the time of delivery. The vehicles furnished hereunder shall be delivered ready for immediate use.

E. SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.

F. DELIVERY POINT. All transportation charges borne by the contractor, Three (3) each to the NAVFACFE, Transportation, Atsugi detachment (P.O.C is Mr. Hughes, Steven, Tel 0467-(63)-3554, Email: Steven.Hughes@fe.navy.mil ).

G. DELIVERY DATE. The vehicle shall be delivered at the delivery point specified above within 120 calendar days after delivery order is issued.

H. INSPECTION AND ACCEPTANCE: Final inspection and acceptance of the vehicles furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.

I. INVOICE WILL BE SUBMITTED TO: Department Of The Navy, NAVFAC Far East, IPT, Acquisition Department through the system Wide Area Work Flow (WAWF) electronically in accordance with the

SPECIFICATIONS FOR ITEM 0023, 6 PASSENGER CARGO PICKUP TRUCK

A. ITEM. 0023.

Truck, cargo pickup, crew cab, 4X4, 4 door, 6 passenger, right hand drive, automatic transmission, and air conditioner.

(1) Quantity: One (1) each. E/C 0355-RH

Note: Note: Vehicle/Equipment and furnished accessories shall comply with Cold Climate Specification or equivalent and Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.

B. DIMENSIONS (Metric/Inches).

(1) MINIMUM

Millimeter Inches

Overall Length 4,600 181.1 " Width 1,600 63.0 " Height 1,800 70.9 Cargo Bed:

Inside Length 2,085 82.1 " Width 1,600 63.0

Cargo loading capacity: 950 kg (2,094 lbs).

(2) MAXIMUM

Cargo loading capacity: 1,250 kg (2,756 lbs).

(2) Identification Markings and Registration Numbers: Reflecterized tape dark blue color, and marked

Numbers to the contractor. The contractor shall install locally manufactured license plate both front and rear of each vehicle, plates will be standard 6X12 inches, navy blue lettering on white background.

Lettering to include "U. S. NAVY" in one and one-half inch letters (minimum) centered between the top holes, seven-digit USN number for vehicle(s) in 2-inch letters (minimum) centered below U. S. NAVY,

(4) Engine Displacement: Manufacturer’s standard.

(5) Seat Belt: Shall be installed on all…